diff options
Diffstat (limited to 'libxcb')
75 files changed, 13269 insertions, 13269 deletions
diff --git a/libxcb/.gitignore b/libxcb/.gitignore index 7878d7c25..a922ee4cf 100644 --- a/libxcb/.gitignore +++ b/libxcb/.gitignore @@ -1,30 +1,30 @@ -aclocal.m4
-autom4te.cache
-compile
-depcomp
-install-sh
-libtool
-ltmain.sh
-missing
-mkinstalldirs
-config.guess
-config.h
-config.h.in
-config.log
-config.status
-config.sub
-configure
-configure.lineno
-.deps
-.dirstamp
-.libs
-*.lo
-*.loT
-*.la
-Makefile
-Makefile.in
-stamp-h1
-*.o
-*.pc
-*.tar.bz2
-*.tar.gz
+aclocal.m4 +autom4te.cache +compile +depcomp +install-sh +libtool +ltmain.sh +missing +mkinstalldirs +config.guess +config.h +config.h.in +config.log +config.status +config.sub +configure +configure.lineno +.deps +.dirstamp +.libs +*.lo +*.loT +*.la +Makefile +Makefile.in +stamp-h1 +*.o +*.pc +*.tar.bz2 +*.tar.gz diff --git a/libxcb/COPYING b/libxcb/COPYING index 50a14e39e..54bfbe5b0 100644 --- a/libxcb/COPYING +++ b/libxcb/COPYING @@ -1,30 +1,30 @@ -Copyright (C) 2001-2006 Bart Massey, Jamey Sharp, and Josh Triplett.
-All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person
-obtaining a copy of this software and associated
-documentation files (the "Software"), to deal in the
-Software without restriction, including without limitation
-the rights to use, copy, modify, merge, publish, distribute,
-sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so,
-subject to the following conditions:
-
-The above copyright notice and this permission notice shall
-be included in all copies or substantial portions of the
-Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
-KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
-WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
-PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS
-BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
-IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors
-or their institutions shall not be used in advertising or
-otherwise to promote the sale, use or other dealings in this
-Software without prior written authorization from the
-authors.
+Copyright (C) 2001-2006 Bart Massey, Jamey Sharp, and Josh Triplett. +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person +obtaining a copy of this software and associated +documentation files (the "Software"), to deal in the +Software without restriction, including without limitation +the rights to use, copy, modify, merge, publish, distribute, +sublicense, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, +subject to the following conditions: + +The above copyright notice and this permission notice shall +be included in all copies or substantial portions of the +Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY +KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE +WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR +PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS +BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER +IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors +or their institutions shall not be used in advertising or +otherwise to promote the sale, use or other dealings in this +Software without prior written authorization from the +authors. diff --git a/libxcb/INSTALL b/libxcb/INSTALL index bf8c23f1f..54caf7c19 100644 --- a/libxcb/INSTALL +++ b/libxcb/INSTALL @@ -1,229 +1,229 @@ -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
-Foundation, Inc.
-
- This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
- These are generic installation instructions.
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. (Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.)
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
-
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package.
-
- 4. Type `make install' to install the programs and any data files and
- documentation.
-
- 5. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
-Compilers and Options
-=====================
-
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
-for details on some of the pertinent environment variables.
-
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
-
- ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-
- *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
- You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
- If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory. After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
-
-Installation Names
-==================
-
- By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
- In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
- Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
- There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on. Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
- CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
- OS KERNEL-OS
-
- See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
- If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
-produce code for.
-
- If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
- Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
-
- ./configure CC=/usr/local2/bin/gcc
-
-will cause the specified gcc to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-`configure' Invocation
-======================
-
- `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
- Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`--cache-file=FILE'
- Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
- disable caching.
-
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
-
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software +Foundation, Inc. + + This file is free documentation; the Free Software Foundation gives +unlimited permission to copy, distribute and modify it. + +Basic Installation +================== + + These are generic installation instructions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. (Caching is +disabled by default to prevent problems with accidental use of stale +cache files.) + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You only need +`configure.ac' if you want to change it or regenerate `configure' using +a newer version of `autoconf'. + +The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. If you're + using `csh' on an old version of System V, you might need to type + `sh ./configure' instead to prevent `csh' from trying to execute + `configure' itself. + + Running `configure' takes awhile. While running, it prints some + messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package. + + 4. Type `make install' to install the programs and any data files and + documentation. + + 5. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you must use a version of `make' that +supports the `VPATH' variable, such as GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + + If you have to use a `make' that does not support the `VPATH' +variable, you have to compile the package for one architecture at a +time in the source code directory. After you have installed the +package for one architecture, use `make distclean' before reconfiguring +for another architecture. + +Installation Names +================== + + By default, `make install' will install the package's files in +`/usr/local/bin', `/usr/local/man', etc. You can specify an +installation prefix other than `/usr/local' by giving `configure' the +option `--prefix=PATH'. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +give `configure' the option `--exec-prefix=PATH', the package will use +PATH as the prefix for installing programs and libraries. +Documentation and other data files will still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=PATH' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +Optional Features +================= + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + +Specifying the System Type +========================== + + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS KERNEL-OS + + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the `--target=TYPE' option to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Defining Variables +================== + + Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +will cause the specified gcc to be used as the C compiler (unless it is +overridden in the site shell script). + +`configure' Invocation +====================== + + `configure' recognizes the following options to control how it +operates. + +`--help' +`-h' + Print a summary of the options to `configure', and exit. + +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. + diff --git a/libxcb/README b/libxcb/README index cb830a436..167c8aca6 100644 --- a/libxcb/README +++ b/libxcb/README @@ -1,36 +1,36 @@ -About libxcb
-============
-
-libxcb provides an interface to the X Window System protocol, which
-replaces the current Xlib interface. It has several advantages over
-Xlib, including:
-- size: small, simple library, and lower memory footprint
-- latency hiding: batch several requests and wait for the replies later
-- direct protocol access: interface and protocol correspond exactly
-- proven thread support: transparently access XCB from multiple threads
-- easy extension implementation: interfaces auto-generated from XML-XCB
-
-Xlib can also use XCB as a transport layer, allowing software to make
-requests and receive responses with both, which eases porting to XCB.
-However, client programs, libraries, and toolkits will gain the most
-benefit from a native XCB port.
-
-
-Please report any issues you find to the freedesktop.org bug tracker,
-at:
-
- <https://bugs.freedesktop.org/enter_bug.cgi?product=XCB>
-
-Discussion about XCB occurs on the XCB mailing list:
-
- <mailto:xcb at lists.freedesktop.org>
- <http://lists.freedesktop.org/mailman/listinfo/xcb>
-
-You can obtain the latest development versions of XCB using GIT.
-For anonymous checkouts, use:
-
- git clone git://anongit.freedesktop.org/git/xcb/libxcb
-
-For developers, use:
-
- git clone git+ssh://git.freedesktop.org/git/xcb/libxcb
+About libxcb +============ + +libxcb provides an interface to the X Window System protocol, which +replaces the current Xlib interface. It has several advantages over +Xlib, including: +- size: small, simple library, and lower memory footprint +- latency hiding: batch several requests and wait for the replies later +- direct protocol access: interface and protocol correspond exactly +- proven thread support: transparently access XCB from multiple threads +- easy extension implementation: interfaces auto-generated from XML-XCB + +Xlib can also use XCB as a transport layer, allowing software to make +requests and receive responses with both, which eases porting to XCB. +However, client programs, libraries, and toolkits will gain the most +benefit from a native XCB port. + + +Please report any issues you find to the freedesktop.org bug tracker, +at: + + <https://bugs.freedesktop.org/enter_bug.cgi?product=XCB> + +Discussion about XCB occurs on the XCB mailing list: + + <mailto:xcb at lists.freedesktop.org> + <http://lists.freedesktop.org/mailman/listinfo/xcb> + +You can obtain the latest development versions of XCB using GIT. +For anonymous checkouts, use: + + git clone git://anongit.freedesktop.org/git/xcb/libxcb + +For developers, use: + + git clone git+ssh://git.freedesktop.org/git/xcb/libxcb diff --git a/libxcb/acinclude.m4 b/libxcb/acinclude.m4 index 8fa30de73..ad24bc2e5 100644 --- a/libxcb/acinclude.m4 +++ b/libxcb/acinclude.m4 @@ -1,142 +1,142 @@ -dnl Detection and configuration of the visibility feature of gcc
-dnl Vincent Torri 2006-02-11
-dnl
-dnl XCB_CHECK_VISIBILITY([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
-dnl Check the visibility feature of gcc
-dnl
-AC_DEFUN([XCB_CHECK_VISIBILITY],
-[
-AC_MSG_CHECKING([whether ${CC} supports symbol visibility])
-
-save_CFLAGS=${CFLAGS}
-CFLAGS="$CFLAGS -fvisibility=hidden -fvisibility-inlines-hidden"
-AC_COMPILE_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#pragma GCC visibility push(hidden)
-extern void f(int);
-#pragma GCC visibility pop
- ]],
- [[]]
- )],
- [AC_DEFINE(
- GCC_HAS_VISIBILITY,
- [],
- [Defined if GCC supports the visibility feature])
- m4_if([$1], [], [:], [$1])
- AC_MSG_RESULT(yes)],
- [m4_if([$2], [], [:], [$2])
- AC_MSG_RESULT(no)])
-
-CFLAGS=${save_CFLAGS}
-])
-
-dnl Configure script for doxygen
-dnl Vincent Torri 2006-05-11
-dnl
-dnl XCB_CHECK_DOXYGEN([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
-dnl Test for the doxygen program, and define BUILD_DOCS and DOXYGEN.
-dnl
-AC_DEFUN([XCB_CHECK_DOXYGEN],
-[
-DOXYGEN="doxygen"
-
-dnl
-dnl Disable the build of the documentation
-dnl
-AC_ARG_ENABLE(
- [build_docs],
- AC_HELP_STRING(
- [--disable-build-docs],
- [Disable the build of the documentation]),
- [if test x"$enableval" != x"yes" ; then
- enable_build_docs="no"
- else
- enable_build_docs="yes"
- fi],
- [enable_build_docs="yes"])
-
-if test "$enable_build_docs" = "no" ; then
- BUILD_DOCS=no
-else
-dnl
-dnl Get the prefix where doxygen is installed.
-dnl
-AC_ARG_WITH(
- [doxygen],
- AC_HELP_STRING(
- [--with-doxygen=FILE],
- [doxygen program to use (eg /usr/bin/doxygen)]),
- dnl
- dnl Check the given doxygen program.
- dnl
- [DOXYGEN=${withval}
- AC_CHECK_PROG(
- [BUILD_DOCS],
- [${DOXYGEN}],
- [yes],
- [no])
- if test $BUILD_DOCS = no; then
- echo "WARNING:"
- echo "The doxygen program you specified:"
- echo "$DOXYGEN"
- echo "was not found. Please check the path and make sure "
- echo "the program exists and is executable."
- AC_MSG_WARN(
- [Warning: no doxygen detected. Documentation will not be built])
- fi],
- [AC_CHECK_PROG(
- [BUILD_DOCS],
- [${DOXYGEN}],
- [yes],
- [no])
- if test ${BUILD_DOCS} = no; then
- echo "WARNING:"
- echo "The doxygen program was not found in your execute"
- echo "You may have doxygen installed somewhere not covered by your path."
- echo ""
- echo "If this is the case make sure you have the packages installed, AND"
- echo "that the doxygen program is in your execute path (see your"
- echo "shell manual page on setting the \$PATH environment variable), OR"
- echo "alternatively, specify the program to use with --with-doxygen."
- AC_MSG_WARN(
- [Warning: no doxygen detected. Documentation will not be built])
- fi])
- AC_PATH_PROG(DOT, dot, no)
- if test "$DOT" = "no"; then
- AC_MSG_WARN([Warning: no dot detected. Documentation will not be built])
- BUILD_DOCS="no"
- fi
-fi
-AC_MSG_CHECKING([whether documentation is built])
-AC_MSG_RESULT([${BUILD_DOCS}])
-
-dnl
-dnl Substitution
-dnl
-AC_SUBST([DOXYGEN])
-
-AM_CONDITIONAL(BUILD_DOCS, test "x$BUILD_DOCS" = "xyes")
-
-])
-
-dnl Detection and configuration of the visibility feature of gcc
-dnl Vincent Torri 2006-02-11
-dnl
-dnl XCB_EXTENSION(name, default)
-dnl set the X extension
-dnl
-AC_DEFUN([XCB_EXTENSION],
-[
-pushdef([UP], translit([$1], [-a-z], [_A-Z]))dnl
-pushdef([DOWN], translit([$1], [A-Z], [a-z]))dnl
-
-AC_ARG_ENABLE(DOWN,
- [AS_HELP_STRING([--enable-[]DOWN], [Build XCB $1 Extension (default: $2)])],
- [BUILD_[]UP=$enableval],
- [BUILD_[]UP=$2])
-
-AM_CONDITIONAL(BUILD_[]UP, [test "x$BUILD_[]UP" = "xyes"])
-])
-
-dnl End of acinclude.m4
+dnl Detection and configuration of the visibility feature of gcc +dnl Vincent Torri 2006-02-11 +dnl +dnl XCB_CHECK_VISIBILITY([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]) +dnl Check the visibility feature of gcc +dnl +AC_DEFUN([XCB_CHECK_VISIBILITY], +[ +AC_MSG_CHECKING([whether ${CC} supports symbol visibility]) + +save_CFLAGS=${CFLAGS} +CFLAGS="$CFLAGS -fvisibility=hidden -fvisibility-inlines-hidden" +AC_COMPILE_IFELSE( + [AC_LANG_PROGRAM( + [[ +#pragma GCC visibility push(hidden) +extern void f(int); +#pragma GCC visibility pop + ]], + [[]] + )], + [AC_DEFINE( + GCC_HAS_VISIBILITY, + [], + [Defined if GCC supports the visibility feature]) + m4_if([$1], [], [:], [$1]) + AC_MSG_RESULT(yes)], + [m4_if([$2], [], [:], [$2]) + AC_MSG_RESULT(no)]) + +CFLAGS=${save_CFLAGS} +]) + +dnl Configure script for doxygen +dnl Vincent Torri 2006-05-11 +dnl +dnl XCB_CHECK_DOXYGEN([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]) +dnl Test for the doxygen program, and define BUILD_DOCS and DOXYGEN. +dnl +AC_DEFUN([XCB_CHECK_DOXYGEN], +[ +DOXYGEN="doxygen" + +dnl +dnl Disable the build of the documentation +dnl +AC_ARG_ENABLE( + [build_docs], + AC_HELP_STRING( + [--disable-build-docs], + [Disable the build of the documentation]), + [if test x"$enableval" != x"yes" ; then + enable_build_docs="no" + else + enable_build_docs="yes" + fi], + [enable_build_docs="yes"]) + +if test "$enable_build_docs" = "no" ; then + BUILD_DOCS=no +else +dnl +dnl Get the prefix where doxygen is installed. +dnl +AC_ARG_WITH( + [doxygen], + AC_HELP_STRING( + [--with-doxygen=FILE], + [doxygen program to use (eg /usr/bin/doxygen)]), + dnl + dnl Check the given doxygen program. + dnl + [DOXYGEN=${withval} + AC_CHECK_PROG( + [BUILD_DOCS], + [${DOXYGEN}], + [yes], + [no]) + if test $BUILD_DOCS = no; then + echo "WARNING:" + echo "The doxygen program you specified:" + echo "$DOXYGEN" + echo "was not found. Please check the path and make sure " + echo "the program exists and is executable." + AC_MSG_WARN( + [Warning: no doxygen detected. Documentation will not be built]) + fi], + [AC_CHECK_PROG( + [BUILD_DOCS], + [${DOXYGEN}], + [yes], + [no]) + if test ${BUILD_DOCS} = no; then + echo "WARNING:" + echo "The doxygen program was not found in your execute" + echo "You may have doxygen installed somewhere not covered by your path." + echo "" + echo "If this is the case make sure you have the packages installed, AND" + echo "that the doxygen program is in your execute path (see your" + echo "shell manual page on setting the \$PATH environment variable), OR" + echo "alternatively, specify the program to use with --with-doxygen." + AC_MSG_WARN( + [Warning: no doxygen detected. Documentation will not be built]) + fi]) + AC_PATH_PROG(DOT, dot, no) + if test "$DOT" = "no"; then + AC_MSG_WARN([Warning: no dot detected. Documentation will not be built]) + BUILD_DOCS="no" + fi +fi +AC_MSG_CHECKING([whether documentation is built]) +AC_MSG_RESULT([${BUILD_DOCS}]) + +dnl +dnl Substitution +dnl +AC_SUBST([DOXYGEN]) + +AM_CONDITIONAL(BUILD_DOCS, test "x$BUILD_DOCS" = "xyes") + +]) + +dnl Detection and configuration of the visibility feature of gcc +dnl Vincent Torri 2006-02-11 +dnl +dnl XCB_EXTENSION(name, default) +dnl set the X extension +dnl +AC_DEFUN([XCB_EXTENSION], +[ +pushdef([UP], translit([$1], [-a-z], [_A-Z]))dnl +pushdef([DOWN], translit([$1], [A-Z], [a-z]))dnl + +AC_ARG_ENABLE(DOWN, + [AS_HELP_STRING([--enable-[]DOWN], [Build XCB $1 Extension (default: $2)])], + [BUILD_[]UP=$enableval], + [BUILD_[]UP=$2]) + +AM_CONDITIONAL(BUILD_[]UP, [test "x$BUILD_[]UP" = "xyes"]) +]) + +dnl End of acinclude.m4 diff --git a/libxcb/autogen.sh b/libxcb/autogen.sh index 6fcae015c..904cd6746 100644 --- a/libxcb/autogen.sh +++ b/libxcb/autogen.sh @@ -1,12 +1,12 @@ -#! /bin/sh
-
-srcdir=`dirname $0`
-test -z "$srcdir" && srcdir=.
-
-ORIGDIR=`pwd`
-cd $srcdir
-
-autoreconf -v --install || exit 1
-cd $ORIGDIR || exit $?
-
-$srcdir/configure --enable-maintainer-mode "$@"
+#! /bin/sh + +srcdir=`dirname $0` +test -z "$srcdir" && srcdir=. + +ORIGDIR=`pwd` +cd $srcdir + +autoreconf -v --install || exit 1 +cd $ORIGDIR || exit $? + +$srcdir/configure --enable-maintainer-mode "$@" diff --git a/libxcb/doc/.gitignore b/libxcb/doc/.gitignore index 55caf95c6..94ce3a9b9 100644 --- a/libxcb/doc/.gitignore +++ b/libxcb/doc/.gitignore @@ -1,2 +1,2 @@ -manual
+manual xcb.doxygen
\ No newline at end of file diff --git a/libxcb/doc/tutorial/index.html b/libxcb/doc/tutorial/index.html index bb3338869..adec0acd3 100644 --- a/libxcb/doc/tutorial/index.html +++ b/libxcb/doc/tutorial/index.html @@ -1,4521 +1,4521 @@ -<!DOCTYPE html public "-//W3C//DTD HTML 4.01 Transitional//EN"
-"http://www.w3.org/TR/html4/loose.dtd">
-
-<html>
-
-<head>
- <title>Basic Graphics Programming With The XCB Library</title>
- <meta http-equiv="content-type" content="text/html; charset=iso-8859-1">
- <link href="xcb.css" rel="stylesheet" type="text/css">
-</head>
-
-<body>
- <div class="title">
- Basic Graphics Programming With The XCB Library
- </div>
- <div class="toc">
- <ol>
- <li><a class="section" href="#intro">Introduction</a>
- <li><a class="section" href="#Xmodel">The client and server model of the X window system</a>
- <li><a class="section" href="#asynch">GUI programming: the asynchronous model</a>
- <li><a class="section" href="#notions">Basic XCB notions</a>
- <ol>
- <li><a class="subsection" href="#conn">The X Connection</a>
- <li><a class="subsection" href="#requestsreplies">Requests and replies: the Xlib killers</a>
- <li><a class="subsection" href="#gc">The Graphics Context</a>
- <li>Object handles
- <li>Memory allocation for XCB structures
- <li><a class="subsection" href="#events">Events</a>
- </ol>
- <li><a class="section" href="#use">Using XCB-based programs</a>
- <ol>
- <li><a class="subsection" href="#inst">Installation of XCB</a>
- <li><a class="subsection" href="#comp">Compiling XCB-based programs</a>
- </ol>
- <li><a class="section" href="#openconn">Opening and closing the connection to an X server</a>
- <li><a class="section" href="#screen">Checking basic information about a connection</a>
- <li><a class="section" href="#helloworld">Creating a basic window - the "hello world" program</a>
- <li><a class="section" href="#drawing">Drawing in a window</a>
- <ol>
- <li><a class="subsection" href="#allocgc">Allocating a Graphics Context</a>
- <li><a class="subsection" href="#changegc">Changing the attributes of a Graphics Context</a>
- <li><a class="subsection" href="#drawingprim">Drawing primitives: point, line, box, circle,...</a>
- </ol>
- <li><a class="section" href="#xevents">X Events</a>
- <ol>
- <li><a class="subsection" href="#register">Registering for event types using event masks</a>
- <li><a class="subsection" href="#loop">Receiving events: writing the events loop</a>
- <li><a class="subsection" href="#expose">Expose events</a>
- <li><a class="subsection" href="#userinput">Getting user input</a>
- <ol>
- <li><a class="subsubsection" href="#mousepressrelease">Mouse button press and release events</a>
- <li><a class="subsubsection" href="#mousemvnt">Mouse movement events</a>
- <li><a class="subsubsection" href="#mouseenter">Mouse pointer enter and leave events</a>
- <li><a class="subsubsection" href="#focus">The keyboard focus</a>
- <li><a class="subsubsection" href="#keypress">Keyboard press and release events</a>
- </ol>
- <li><a class="subsection" href="#eventex">X events: a complete example</a>
- </ol>
- <li><a class="section" href="#font">Handling text and fonts</a>
- <ol>
- <li><a class="subsection" href="#fontstruct">The Font structure</a>
- <li><a class="subsection" href="#openingfont">Opening a Font</a>
- <li><a class="subsection" href="#assigningfont">Assigning a Font to a Graphic Context</a>
- <li><a class="subsection" href="#drawingtext">Drawing text in a drawable</a>
- <li><a class="subsection" href="#fontcompleteexample">Complete example</a>
- </ol>
- <li>Windows hierarchy
- <ol>
- <li>Root, parent and child windows
- <li>Events propagation
- </ol>
- <li><a class="section" href="#wm">Interacting with the window manager</a>
- <ol>
- <li><a class="subsection" href="#wmprop">Window properties</a>
- <li><a class="subsection" href="#wmname">Setting the window name and icon name</a>
- <li>Setting preferred window size(s)
- <li>Setting miscellaneous window manager hints
- <li>Setting an application's icon
- <li>Obeying the delete-window protocol
- </ol>
- <li><a class="section" href="#winop">Simple window operations</a>
- <ol>
- <li><a class="subsection" href="#winmap">Mapping and unmapping a window</a>
- <li><a class="subsection" href="#winconf">Configuring a window</a>
- <li><a class="subsection" href="#winmove">Moving a window around the screen</a>
- <li><a class="subsection" href="#winsize">Resizing a window</a>
- <li><a class="subsection" href="#winstack">Changing windows stacking order: raise and lower</a>
- <li>Iconifying and de-iconifying a window
- <li><a class="subsection" href="#wingetinfo">Getting informations about a window</a>
- </ol>
- <li><a class="section" href="#usecolor">Using colors to paint the rainbow</a>
- <ol>
- <li><a class="subsection" href="#colormap">Color maps</a>
- <li><a class="subsection" href="#colormapalloc">Allocating and freeing Color Maps</a>
- <li><a class="subsection" href="#alloccolor">Allocating and freeing a color entry</a>
- <li>Drawing with a color
- </ol>
- <li><a class="section" href="#pixmaps">X Bitmaps and Pixmaps</a>
- <ol>
- <li><a class="subsection" href="#pixmapswhat">What is a X Bitmap ? An X Pixmap ?</a>
- <li>Loading a bitmap from a file
- <li>Drawing a bitmap in a window
- <li><a class="subsection" href="#pixmapscreate">Creating a pixmap</a>
- <li><a class="subsection" href="#pixmapsdraw">Drawing a pixmap in a window</a>
- <li><a class="subsection" href="#pixmapsfree">Freeing a pixmap</a>
- </ol>
- <li><a class="subsection" href="#mousecursor">Messing with the mouse cursor</a>
- <ol>
- <li><a class="subsection" href="#mousecursorcreate">Creating and destroying a mouse cursor</a>
- <li><a class="subsection" href="#mousecursorset">Setting a window's mouse cursor</a>
- <li><a class="subsection" href="#mousecursorexample">Complete example</a>
- </ol>
- <li><a class="subsection" href="#translation">Translation of basic Xlib functions and macros</a>
- <ol>
- <li><a class="subsection" href="#displaystructure">Members of the Display structure</a>
- <ol>
- <li><a class="subsection" href="#ConnectionNumber">ConnectionNumber</a>
- <li><a class="subsection" href="#DefaultScreen">DefaultScreen</a>
- <li><a class="subsection" href="#QLength">QLength</a>
- <li><a class="subsection" href="#ScreenCount">ScreenCount</a>
- <li><a class="subsection" href="#ServerVendor">ServerVendor</a>
- <li><a class="subsection" href="#ProtocolVersion">ProtocolVersion</a>
- <li><a class="subsection" href="#ProtocolRevision">ProtocolRevision</a>
- <li><a class="subsection" href="#VendorRelease">VendorRelease</a>
- <li><a class="subsection" href="#DisplayString">DisplayString</a>
- <li><a class="subsection" href="#BitmapUnit">BitmapUnit</a>
- <li><a class="subsection" href="#BitmapBitOrder">BitmapBitOrder</a>
- <li><a class="subsection" href="#BitmapPad">BitmapPad</a>
- <li><a class="subsection" href="#ImageByteOrder">ImageByteOrder</a>
- </ol>
- <li><a class="subsection" href="#screenofdisplay">ScreenOfDisplay related functions</a>
- <ol>
- <li><a class="subsection" href="#ScreenOfDisplay">ScreenOfDisplay</a>
- <li><a class="subsection" href="#DefaultScreenOfDisplay">DefaultScreenOfDisplay</a>
- <li><a class="subsection" href="#RootWindow">RootWindow / RootWindowOfScreen</a>
- <li><a class="subsection" href="#DefaultRootWindow">DefaultRootWindow</a>
- <li><a class="subsection" href="#DefaultVisual">DefaultVisual / DefaultVisualOfScreen</a>
- <li><a class="subsection" href="#DefaultGC">DefaultGC / DefaultGCOfScreen</a>
- <li><a class="subsection" href="#BlackPixel">BlackPixel / BlackPixelOfScreen</a>
- <li><a class="subsection" href="#WhitePixel">WhitePixel / WhitePixelOfScreen</a>
- <li><a class="subsection" href="#DisplayWidth">DisplayWidth / WidthOfScreen</a>
- <li><a class="subsection" href="#DisplayHeight">DisplayHeight / HeightOfScreen</a>
- <li><a class="subsection" href="#DisplayWidthMM">DisplayWidthMM / WidthMMOfScreen</a>
- <li><a class="subsection" href="#DisplayHeightMM">DisplayHeightMM / HeightMMOfScreen</a>
- <li><a class="subsection" href="#DisplayPlanes">DisplayPlanes / DefaultDepth / DefaultDepthOfScreen / PlanesOfScreen</a>
- <li><a class="subsection" href="#DefaultColormap">DefaultColormap / DefaultColormapOfScreen</a>
- <li><a class="subsection" href="#MinCmapsOfScreen">MinCmapsOfScreen</a>
- <li><a class="subsection" href="#MaxCmapsOfScreen">MaxCmapsOfScreen</a>
- <li><a class="subsection" href="#DoesSaveUnders">DoesSaveUnders</a>
- <li><a class="subsection" href="#DoesBackingStore">DoesBackingStore</a>
- <li><a class="subsection" href="#EventMaskOfScreen">EventMaskOfScreen</a>
- </ol>
- <li><a class="subsection" href="#misc">Miscellaneaous macros</a>
- <ol>
- <li><a class="subsection" href="#DisplayOfScreen">DisplayOfScreen</a>
- <li><a class="subsection" href="#DisplayCells">DisplayCells / CellsOfScreen</a>
- </ol>
- </ol>
- </ol>
- </div>
- <div class="section">
- <ol>
- <li class="title"><a name="intro">Introduction</a>
- <p>
- This tutorial is based on the
- <a href="http://users.actcom.co.il/~choo/lupg/tutorials/xlib-programming/xlib-programming.html">Xlib Tutorial</a>
- written by <a href="mailto:choor at atcom dot co dot il">Guy Keren</a>. The
- author allowed me to take some parts of his text, mainly the text which
- deals with the X Windows generality.
- </p>
- <p>
- This tutorial is intended for people who want to start to program
- with the <a href="http://xcb.freedesktop.org">XCB</a>
- library. keep in mind that XCB, like the
- <a href="http://tronche.com/gui/x/xlib/introduction">Xlib</a>
- library, isn't what most programmers wanting to write X
- applications are looking for. They should use a much higher
- level GUI toolkit like Motif,
- <a href="http://www.lesstif.org">LessTiff</a>,
- <a href="http://www.gtk.org">GTK</a>,
- <a href="http://www.trolltech.com">QT</a>,
- <a href="http://www.enlightenment.org">EWL</a>,
- <a href="http://www.enlightenment.org">ETK</a>, or use
- <a href="http://cairographics.org">Cairo</a>.
- However,
- we need to start somewhere. More than this, knowing how things
- work down below is never a bad idea.
- </p>
- <p>
- After reading this tutorial, one should be able to write very
- simple graphical programs, but not programs with decent user
- interfaces. For such programs, one of the previously mentioned
- libraries should be used.
- </p>
- <p>
- But what is XCB? Xlib has been
- the standard C binding for the <a href="http://www.x.org">X
- Window System</a> protocol for many years now. It is an
- excellent piece of work, but there are applications for which it
- is not ideal, for example:
- </p>
- <ul>
- <li><b>Small platforms</b>: Xlib is a large piece of code, and
- it's difficult to make it smaller
- <li><b>Latency hiding</b>: Xlib requests requiring a reply are
- effectively synchronous: they block until the reply appears,
- whether the result is needed immediately or not.
- <li><b>Direct access to the protocol</b>: Xlib does quite a
- bit of caching, layering, and similar optimizations. While this
- is normally a feature, it makes it difficult to simply emit
- specified X protocol requests and process specific
- responses.
- <li><b>Threaded applications</b>: While Xlib does attempt to
- support multithreading, the API makes this difficult and
- error-prone.
- <li><b>New extensions</b>: The Xlib infrastructure provides
- limited support for the new creation of X extension client side
- code.
- </ul>
- <p>
- For these reasons, among others, XCB, an X C binding, has been
- designed to solve the above problems and thus provide a base for
- </p>
- <ul>
- <li>Toolkit implementation.
- <li>Direct protocol-level programming.
- <li>Lightweight emulation of commonly used portions of the
- Xlib API.
- </ul>
- <br>
- <li class="title"><a name="Xmodel">The client and server model of the X window system</a>
- <p>
- The X Window System was developed with one major goal:
- flexibility. The idea was that the way things look is one thing,
- but the way things work is another matter. Thus, the lower
- levels provide the tools required to draw windows, handle user
- input, allow drawing graphics using colors (or black and white
- screens), etc. To this point, a decision was made to separate
- the system into two parts. A client that decides what to do, and
- a server that actually draws on the screen and reads user input
- in order to send it to the client for processing.
- </p>
- <p>
- This model is the complete opposite of what is used to when
- dealing with clients and servers. In our case, the user sits
- near the machine controlled by the server, while the client
- might be running on a remote machine. The server controls the
- screens, mouse and keyboard. A client may connect to the server,
- request that it draws a window (or several windows), and ask the
- server to send it any input the user sends to these
- windows. Thus, several clients may connect to a single X server
- (one might be running mail software, one running a WWW
- browser, etc). When input is sent by the user to some window,
- the server sends a message to the client controlling this window
- for processing. The client decides what to do with this input,
- and sends the server requests for drawing in the window.
- </p>
- <p>
- The whole session is carried out using the X message
- protocol. This protocol was originally carried over the TCP/IP
- protocol suite, allowing the client to run on any machine
- connected to the same network that the server is. Later on, the
- X servers were extended to allow clients running on the local
- machine with more optimized access to the server (note that an X
- protocol message may be several hundreds of KB in size), such as
- using shared memory, or using Unix domain sockets (a method for
- creating a logical channel on a Unix system between two processes).
- </p>
- <li class="title"><a name="asynch">GUI programming: the asynchronous model</a>
- <p>
- Unlike conventional computer programs, that carry some serial
- nature, a GUI program usually uses an asynchronous programming
- model, also known as "event-driven programming". This means that
- that program mostly sits idle, waiting for events sent by the X
- server, and then acts upon these events. An event may say "The
- user pressed the 1st button mouse in spot (x,y)", or "The window
- you control needs to be redrawn". In order for the program to be
- responsive to the user input, as well as to refresh requests, it
- needs to handle each event in a rather short period of time
- (e.g. less that 200 milliseconds, as a rule of thumb).
- </p>
- <p>
- This also implies that the program may not perform operations
- that might take a long time while handling an event (such as
- opening a network connection to some remote server, or
- connecting to a database server, or even performing a long file
- copy operation). Instead, it needs to perform all these
- operations in an asynchronous manner. This may be done by using
- various asynchronous models to perform the longish operations,
- or by performing them in a different process or thread.
- </p>
- <p>
- So the way a GUI program looks is something like that:
- </p>
- <ol>
- <li>Perform initialization routines.
- <li>Connect to the X server.
- <li>Perform X-related initialization.
- <li>While not finished:
- <ol>
- <li>Receive the next event from the X server.
- <li>Handle the event, possibly sending various drawing
- requests to the X server.
- <li>If the event was a quit message, exit the loop.
- </ol>
- <li>Close down the connection to the X server.
- <li>Perform cleanup operations.
- </ol>
- <br>
- <li class="title"><a name="notions">Basic XCB notions</a>
- <p>
- XCB has been created to eliminate the need for
- programs to actually implement the X protocol layer. This
- library gives a program a very low-level access to any X
- server. Since the protocol is standardized, a client using any
- implementation of XCB may talk with any X server (the same
- occurs for Xlib, of course). We now give a brief description of
- the basic XCB notions. They will be detailed later.
- </p>
- <ol>
- <li class="subtitle"><a name="conn">The X Connection</a>
- <p>
- The major notion of using XCB is the X Connection. This is a
- structure representing the connection we have open with a
- given X server. It hides a queue of messages coming from the
- server, and a queue of pending requests that our client
- intends to send to the server. In XCB, this structure is named
- 'xcb_connection_t'. It is analogous to the Xlib Display.
- When we open a connection to an X server, the
- library returns a pointer to such a structure. Later, we
- supply this pointer to any XCB function that should send
- messages to the X server or receive messages from this server.
- </p>
- <li class="subtitle"><a name="requestsreplies">Requests and
- replies: the Xlib killers</a>
- <p>
- To ask for information from the X server, we have to make a request
- and ask for a reply. With Xlib, these two tasks are
- automatically done: Xlib locks the system, sends a request,
- waits for a reply from the X server and unlocks. This is
- annoying, especially if one makes a lot of requests to the X
- server. Indeed, Xlib has to wait for the end of a reply
- before asking for the next request (because of the locks that
- Xlib sends). For example, here is a time-line of N=4
- requests/replies with Xlib, with a round-trip latency
- <b>T_round_trip</b> that is 5 times long as the time required
- to write or read a request/reply (<b>T_write/T_read</b>):
- </p>
- <pre class="text">
- W-----RW-----RW-----RW-----R
-</pre>
- <ul>
- <li>W: Writing request
- <li>-: Stalled, waiting for data
- <li>R: Reading reply
- </ul>
- <p>
- The total time is N * (T_write + T_round_trip + T_read).
- </p>
- <p>
- With XCB, we can suppress most of the round-trips as the
- requests and the replies are not locked. We usually send a
- request, then XCB returns to us a <b>cookie</b>, which is an
- identifier. Then, later, we ask for a reply using this
- <b>cookie</b> and XCB returns a
- pointer to that reply. Hence, with XCB, we can send a lot of
- requests, and later in the program, ask for all the replies
- when we need them. Here is the time-line for 4
- requests/replies when we use this property of XCB:
- </p>
- <pre class="text">
- WWWW--RRRR
-</pre>
- <p>
- The total time is N * T_write + max (0, T_round_trip - (N-1) *
- T_write) + N * T_read. Which can be considerably faster than
- all those Xlib round-trips.
- </p>
- <p>
- Here is a program that computes the time to create 500 atoms
- with Xlib and XCB. It shows the Xlib way, the bad XCB way
- (which is similar to Xlib) and the good XCB way. On my
- computer, XCB is 25 times faster than Xlib.
- </p>
- <pre class="code">
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <sys/time.h>
-
-#include <xcb/xcb.h>
-
-#include <X11/Xlib.h>
-
-double
-get_time(void)
-{
- struct timeval timev;
-
- gettimeofday(&timev, NULL);
-
- return (double)timev.tv_sec + (((double)timev.tv_usec) / 1000000);
-}
-
-int
-main ()
-{
- xcb_connection_t *c;
- xcb_atom_t *atoms;
- xcb_intern_atom_cookie_t *cs;
- char **names;
- int count;
- int i;
- double start;
- double end;
- double diff;
-
- /* Xlib */
- Display *disp;
- Atom *atoms_x;
- double diff_x;
-
- c = xcb_connect (NULL, NULL);
-
- count = 500;
- atoms = (xcb_atom_t *)malloc (count * sizeof (atoms));
- names = (char **)malloc (count * sizeof (char *));
-
- /* init names */
- for (i = 0; i < count; ++i) {
- char buf[100];
-
- sprintf (buf, "NAME%d", i);
- names[i] = strdup (buf);
- }
-
- /* bad use */
- start = get_time ();
-
- for (i = 0; i < count; ++i)
- atoms[i] = xcb_intern_atom_reply (c,
- xcb_intern_atom (c,
- 0,
- strlen(names[i]),
- names[i]),
- NULL)->atom;
-
- end = get_time ();
- diff = end - start;
- printf ("bad use time : %f\n", diff);
-
- /* good use */
- start = get_time ();
-
- cs = (xcb_intern_atom_cookie_t *) malloc (count * sizeof(xcb_intern_atom_cookie_t));
- for(i = 0; i < count; ++i)
- cs[i] = xcb_intern_atom (c, 0, strlen(names[i]), names[i]);
-
- for(i = 0; i < count; ++i) {
- xcb_intern_atom_reply_t *r;
-
- r = xcb_intern_atom_reply(c, cs[i], 0);
- if(r)
- atoms[i] = r->atom;
- free(r);
- }
-
- end = get_time ();
- printf ("good use time : %f\n", end - start);
- printf ("ratio : %f\n", diff / (end - start));
- diff = end - start;
-
- /* free var */
- free (atoms);
- free (cs);
-
- xcb_disconnect (c);
-
- /* Xlib */
- disp = XOpenDisplay (getenv("DISPLAY"));
-
- atoms_x = (Atom *)malloc (count * sizeof (atoms_x));
-
- start = get_time ();
-
- for (i = 0; i < count; ++i)
- atoms_x[i] = XInternAtom(disp, names[i], 0);
-
- end = get_time ();
- diff_x = end - start;
- printf ("Xlib use time : %f\n", diff_x);
- printf ("ratio : %f\n", diff_x / diff);
-
- free (atoms_x);
- for (i = 0; i < count; ++i)
- free (names[i]);
- free (names);
-
- XCloseDisplay (disp);
-
- return 0;
-}
-</pre>
- <li class="subtitle"><a name="gc">The Graphic Context</a>
- <p>
- When we perform various drawing operations (graphics, text,
- etc), we may specify various options for controlling how the
- data will be drawn (what foreground and background colors to
- use, how line edges will be connected, what font to use when
- drawing some text, etc). In order to avoid the need to supply
- hundreds of parameters to each drawing function, a graphical
- context structure is used. We set the various drawing options
- in this structure, and then we pass a pointer to this
- structure to any drawing routines. This is rather handy, as we
- often need to perform several drawing requests with the same
- options. Thus, we would initialize a graphical context, set
- the desired options, and pass this structure to all drawing
- functions.
- </p>
- <p>
- Note that graphic contexts have no client-side structure in
- XCB, they're just XIDs. Xlib has a client-side structure
- because it caches the GC contents so it can avoid making
- redundant requests, but of course XCB doesn't do that.
- </p>
- <li class="subtitle"><a name="events">Events</a>
- <p>
- A structure is used to pass events received from the X
- server. XCB supports exactly the events specified in the
- protocol (33 events). This structure contains the type
- of event received (including a bit for whether it came
- from the server or another client), as well as the data associated with the
- event (e.g. position on the screen where the event was
- generated, mouse button associated with the event, region of
- the screen associated with a "redraw" event, etc). The way to
- read the event's data depends on the event type.
- </p>
- </ol>
- <br>
- <li class="title"><a name="use">Using XCB-based programs</a>
- <br>
- <ol>
- <li class="subtitle"><a name="inst">Installation of XCB</a>
- <p>
- <b>TODO:</b> These instructions are out of date.
- Just reference the <a href="http://xcb.freedesktop.org/">main XCB page</a>
- so we don't have to maintain these instructions in more than
- one place.
- </p>
- <p>
- To build XCB from source, you need to have installed at
- least:
- </p>
- <ul>
- <li>pkgconfig 0.15.0
- <li><a href="http://www.gnu.org/software/automake/">automake 1.7</a>
- <li><a href="http://www.gnu.org/software/autoconf/">autoconf 2.50</a>
- <li><a href="http://www.check.org">check</a>
- <li><a href="http://xmlsoft.org/XSLT/">xsltproc</a>
- <li><a href="http://www.gnu.org/software/gperf/">gperf 3.0.1</a>
- </ul>
- <p>
- You have to checkout in the git repository the following modules:
- </p>
- <ul>
- <li>Xau from xlibs
- <li>xcb-proto
- <li>xcb
- </ul>
- <p>
- Note that xcb-proto exists only to install header
- files, so typing 'make' or 'make all' will produce the message
- "Nothing to be done for 'all'". That's normal.
- </p>
- <li class="subtitle"><a name="comp">Compiling XCB-based programs</a>
- <p>
- Compiling XCB-based programs requires linking them with the XCB
- library. This is easily done thanks to pkgconfig:
- </p>
- <pre class="text">
-gcc -Wall prog.c -o prog `pkg-config --cflags --libs xcb`
-</pre>
- </ol>
- <li class="title"><a name="openconn">Opening and closing the connection to an X server</a>
- <p>
- An X program first needs to open the connection to the X
- server. There is a function that opens a connection. It requires
- the display name, or NULL. In the latter case, the display name
- will be the one in the environment variable DISPLAY.
- </p>
- <pre class="code">
-<span class="type">xcb_connection_t</span> *xcb_connect (<span class="keyword">const</span> <span class="type">char</span> *displayname,
- <span class="type">int</span> *screenp);
-</pre>
- <p>
- The second parameter returns the screen number used for the
- connection. The returned structure describes an XCB connection
- and is opaque. Here is how the connection can be opened:
- </p>
- <pre class="code">
-#<span class="include">include</span> <span class="string"><xcb/xcb.h></span>
-
-<span class="type">int</span>
-<span class="function">main</span> ()
-{
- <span class="type">xcb_connection_t</span> *c;
-
- /* Open the connection to the X server. Use the DISPLAY environment variable as the default display name */
- c = xcb_connect (NULL, NULL);
-
- <span class="keyword">return</span> 0;
-}
-</pre>
- <p>
- To close a connection, it suffices to use:
- </p>
- <pre class="code">
-<span class="type">void</span> xcb_disconnect (<span class="type">xcb_connection_t</span> *c);
-</pre>
- <div class="comp">
- <div class="title">
- Comparison Xlib/XCB
- </div>
- <div class="xlib">
- <ul>
- <li>XOpenDisplay ()
- </ul>
- </div>
- <div class="xcb">
- <ul>
- <li>xcb_connect ()
- </ul>
- </div>
- <div class="xlib">
- <ul>
- <li>XCloseDisplay ()
- </ul>
- </div>
- <div class="xcb">
- <ul>
- <li>xcb_disconnect ()
- </ul>
- </div>
- </div>
- <br>
- <li class="title"><a name="screen">Checking basic information about a connection</a>
- <p>
- Once we have opened a connection to an X server, we should check some
- basic information about it: what screens it has, what is the
- size (width and height) of the screen, how many colors it
- supports (black and white ? grey scale ?, 256 colors ? more ?),
- and so on. We get such information from the xcb_screen_t
- structure:
- </p>
- <pre class="code">
-typedef struct {
- xcb_window_t root;
- xcb_colormap_t default_colormap;
- uint32_t white_pixel;
- uint32_t black_pixel;
- uint32_t current_input_masks;
- uint16_t width_in_pixels;
- uint16_t height_in_pixels;
- uint16_t width_in_millimeters;
- uint16_t height_in_millimeters;
- uint16_t min_installed_maps;
- uint16_t max_installed_maps;
- xcb_visualid_t root_visual;
- uint8_t backing_stores;
- uint8_t save_unders;
- uint8_t root_depth;
- uint8_t allowed_depths_len;
-} xcb_screen_t;
-</pre>
- <p>
- We could retrieve the first screen of the connection by using the
- following function:
- </p>
- <pre class="code">
-xcb_screen_iterator_t xcb_setup_roots_iterator (xcb_setup_t *R);
-</pre>
- <p>
- Here is a small program that shows how to use this function:
- </p>
- <pre class="code">
-#include <stdio.h>
-
-#include <xcb/xcb.h>
-
-int
-main ()
-{
- xcb_connection_t *c;
- xcb_screen_t *screen;
- int screen_nbr;
- xcb_screen_iterator_t iter;
-
- /* Open the connection to the X server. Use the DISPLAY environment variable */
- c = xcb_connect (NULL, &screen_nbr);
-
- /* Get the screen #screen_nbr */
- iter = xcb_setup_roots_iterator (xcb_get_setup (c));
- for (; iter.rem; --screen_nbr, xcb_screen_next (&iter))
- if (screen_nbr == 0) {
- screen = iter.data;
- break;
- }
-
- printf ("\n");
- printf ("Informations of screen %ld:\n", screen->root);
- printf (" width.........: %d\n", screen->width_in_pixels);
- printf (" height........: %d\n", screen->height_in_pixels);
- printf (" white pixel...: %ld\n", screen->white_pixel);
- printf (" black pixel...: %ld\n", screen->black_pixel);
- printf ("\n");
-
- return 0;
-}
-</pre>
- <li class="title"><a name="helloworld">Creating a basic window - the "hello world" program</a>
- <p>
- After we got some basic information about our screen, we can
- create our first window. In the X Window System, a window is
- characterized by an Id. So, in XCB, a window is of type:
- </p>
- <pre class="code">
-typedef uint32_t xcb_window_t;
-</pre>
- <p>
- We first ask for a new Id for our window, with this function:
- </p>
- <pre class="code">
-xcb_window_t xcb_generate_id(xcb_connection_t *c);
-</pre>
- <p>
- Then, XCB supplies the following function to create new windows:
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_create_window (xcb_connection_t *c, /* Pointer to the xcb_connection_t structure */
- uint8_t depth, /* Depth of the screen */
- xcb_window_t wid, /* Id of the window */
- xcb_window_t parent, /* Id of an existing window that should be the parent of the new window */
- int16_t x, /* X position of the top-left corner of the window (in pixels) */
- int16_t y, /* Y position of the top-left corner of the window (in pixels) */
- uint16_t width, /* Width of the window (in pixels) */
- uint16_t height, /* Height of the window (in pixels) */
- uint16_t border_width, /* Width of the window's border (in pixels) */
- uint16_t _class,
- xcb_visualid_t visual,
- uint32_t value_mask,
- const uint32_t *value_list);
-</pre>
- <p>
- The fact that we created the window does not mean that it will
- be drawn on screen. By default, newly created windows are not
- mapped on the screen (they are invisible). In order to make our
- window visible, we use the function <span class="code">xcb_map_window()</span>, whose
- prototype is
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_map_window (xcb_connection_t *c,
- xcb_window_t window);
-</pre>
- <p>
- Finally, here is a small program to create a window of size
- 150x150 pixels, positioned at the top-left corner of the screen:
- </p>
- <pre class="code">
-#include <unistd.h> /* pause() */
-
-#include <xcb/xcb.h>
-
-int
-main ()
-{
- xcb_connection_t *c;
- xcb_screen_t *screen;
- xcb_window_t win;
-
- /* Open the connection to the X server */
- c = xcb_connect (NULL, NULL);
-
- /* Get the first screen */
- screen = xcb_setup_roots_iterator (xcb_get_setup (c)).data;
-
- /* Ask for our window's Id */
- win = xcb_generate_id(c);
-
- /* Create the window */
- xcb_create_window (c, /* Connection */
- XCB_COPY_FROM_PARENT, /* depth (same as root)*/
- win, /* window Id */
- screen->root, /* parent window */
- 0, 0, /* x, y */
- 150, 150, /* width, height */
- 10, /* border_width */
- XCB_WINDOW_CLASS_INPUT_OUTPUT, /* class */
- screen->root_visual, /* visual */
- 0, NULL); /* masks, not used yet */
-
- /* Map the window on the screen */
- xcb_map_window (c, win);
-
- /* Make sure commands are sent before we pause, so window is shown */
- xcb_flush (c);
-
- pause (); /* hold client until Ctrl-C */
-
- return 0;
-}
-</pre>
- <p>
- In this code, you see one more function - <span class="code">xcb_flush()</span>, not explained
- yet. It is used to flush all the pending requests. More
- precisely, there are 2 functions that do such things. The first
- one is <span class="code">xcb_flush()</span>:
- </p>
- <pre class="code">
-int xcb_flush (xcb_connection_t *c);
-</pre>
- <p>
- This function flushes all pending requests to the X server (much
- like the <span class="code">fflush()</span> function is used to
- flush standard output). The second function is
- <span class="code">xcb_aux_sync()</span>:
- </p>
- <pre class="code">
-int xcb_aux_sync (xcb_connection_t *c);
-</pre>
- <p>
- This functions also flushes all pending requests to the X
- server, and then waits until the X server finishing processing
- these requests. In a normal program, this will not be necessary
- (we'll see why when we get to write a normal X program), but for
- now, we put it there.
- </p>
- <p>
- The window that is created by the above code has a non defined
- background. This one can be set to a specific color,
- thanks to the two last parameters of
- <span class="code">xcb_create_window()</span>, which are not
- described yet. See the subsections
- <a href="#winconf">Configuring a window</a> or
- <a href="#winconf">Registering for event types using event masks</a>
- for examples on how to use these parameters. In addition, as no
- events are handled, you have to make a Ctrl-C to interrupt the
- program.
- </p>
- <p>
- <b>TODO</b>: one should tell what these functions return and
- about the generic error
- </p>
- <div class="comp">
- <div class="title">
- Comparison Xlib/XCB
- </div>
- <div class="xlib">
- <ul>
- <li>XCreateWindow ()
- </ul>
- </div>
- <div class="xcb">
- <ul>
- <li>xcb_generate_id ()
- <li>xcb_create_window ()
- </ul>
- </div>
- </div>
- <br>
- <li class="title"><a name="drawing">Drawing in a window</a>
- <p>
- Drawing in a window can be done using various graphical
- functions (drawing pixels, lines, rectangles, etc). In order to
- draw in a window, we first need to define various general
- drawing parameters (what line width to use, which color to draw
- with, etc). This is done using a graphical context.
- </p>
- <ol>
- <li class="subtitle"><a name="allocgc">Allocating a Graphics Context</a>
- <p>
- As we said, a graphical context defines several attributes to
- be used with the various drawing functions. For this, we
- define a graphical context. We can use more than one graphical
- context with a single window, in order to draw in multiple
- styles (different colors, different line widths, etc). In XCB,
- a Graphics Context is, as a window, characterized by an Id:
- </p>
- <pre class="code">
-typedef uint32_t xcb_gcontext_t;
-</pre>
- <p>
- We first ask the X server to attribute an Id to our graphic
- context with this function:
- </p>
- <pre class="code">
-xcb_gcontext_t xcb_generate_id (xcb_connection_t *c);
-</pre>
- <p>
- Then, we set the attributes of the graphic context with this function:
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_create_gc (xcb_connection_t *c,
- xcb_gcontext_t cid,
- xcb_drawable_t drawable,
- uint32_t value_mask,
- const uint32_t *value_list);
-</pre>
- <p>
- We give now an example on how to allocate a graphic context
- that specifies that each drawing function that uses it will
- draw in foreground with a black color.
- </p>
- <pre class="code">
-#include <xcb/xcb.h>
-
-int
-main ()
-{
- xcb_connection_t *c;
- xcb_screen_t *screen;
- xcb_drawable_t win;
- xcb_gcontext_t black;
- uint32_t mask;
- uint32_t value[1];
-
- /* Open the connection to the X server and get the first screen */
- c = xcb_connect (NULL, NULL);
- screen = xcb_setup_roots_iterator (xcb_get_setup (c)).data;
-
- /* Create a black graphic context for drawing in the foreground */
- win = screen->root;
- black = xcb_generate_id (c);
- mask = XCB_GC_FOREGROUND;
- value[0] = screen->black_pixel;
- xcb_create_gc (c, black, win, mask, value);
-
- return 0;
-}
-</pre>
- <p>
- Note should be taken regarding the role of "value_mask" and
- "value_list" in the prototype of <span class="code">xcb_create_gc()</span>. Since a
- graphic context has many attributes, and since we often just
- want to define a few of them, we need to be able to tell the
- <span class="code">xcb_create_gc()</span> which attributes we
- want to set. This is what the "value_mask" parameter is
- for. We then use the "value_list" parameter to specify actual
- values for the attribute we defined in "value_mask". Thus, for
- each constant used in "value_list", we will use the matching
- constant in "value_mask". In this case, we define a graphic
- context with one attribute: when drawing (a point, a line,
- etc), the foreground color will be black. The rest of the
- attributes of this graphic context will be set to their
- default values.
- </p>
- <p>
- See the next Subsection for more details.
- </p>
- <div class="comp">
- <div class="title">
- Comparison Xlib/XCB
- </div>
- <div class="xlib">
- <ul>
- <li>XCreateGC ()
- </ul>
- </div>
- <div class="xcb">
- <ul>
- <li>xcb_generate_id ()
- <li>xcb_create_gc ()
- </ul>
- </div>
- </div>
- <br>
- <li class="subtitle"><a name="changegc">Changing the attributes of a Graphics Context</a>
- <p>
- Once we have allocated a Graphic Context, we may need to
- change its attributes (for example, changing the foreground
- color we use to draw a line, or changing the attributes of the
- font we use to display strings. See Subsections Drawing with a
- color and
- <a href="#assigningfont">Assigning a Font to a Graphic Context</a>).
- This is done by using this function:
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_change_gc (xcb_connection_t *c, /* The XCB Connection */
- xcb_gcontext_t gc, /* The Graphic Context */
- uint32_t value_mask, /* Components of the Graphic Context that have to be set */
- const uint32_t *value_list); /* Value as specified by value_mask */
-</pre>
- <p>
- The <span class="code">value_mask</span> parameter could take
- any combination of these masks from the xcb_gc_t enumeration:
- </p>
- <ul>
- <li>XCB_GC_FUNCTION
- <li>XCB_GC_PLANE_MASK
- <li>XCB_GC_FOREGROUND
- <li>XCB_GC_BACKGROUND
- <li>XCB_GC_LINE_WIDTH
- <li>XCB_GC_LINE_STYLE
- <li>XCB_GC_CAP_STYLE
- <li>XCB_GC_JOIN_STYLE
- <li>XCB_GC_FILL_STYLE
- <li>XCB_GC_FILL_RULE
- <li>XCB_GC_TILE
- <li>XCB_GC_STIPPLE
- <li>XCB_GC_TILE_STIPPLE_ORIGIN_X
- <li>XCB_GC_TILE_STIPPLE_ORIGIN_Y
- <li>XCB_GC_FONT
- <li>XCB_GC_SUBWINDOW_MODE
- <li>XCB_GC_GRAPHICS_EXPOSURES
- <li>XCB_GC_CLIP_ORIGIN_X
- <li>XCB_GC_CLIP_ORIGIN_Y
- <li>XCB_GC_CLIP_MASK
- <li>XCB_GC_DASH_OFFSET
- <li>XCB_GC_DASH_LIST
- <li>XCB_GC_ARC_MODE
- </ul>
- <p>
- It is possible to set several attributes at the same
- time (for example setting the attributes of a font and the
- color which will be used to display a string), by OR'ing these
- values in <span class="code">value_mask</span>. Then
- <span class="code">value_list</span> has to be an array which
- lists the value for the respective attributes. <b>These values
- must be in the same order as masks listed above.</b> See Subsection
- Drawing with a color to have an example.
- </p>
- <p>
- <b>TODO</b>: set the links of the 3 subsections, once they will
- be written :)
- </p>
- <p>
- <b>TODO</b>: give an example which sets several attributes.
- </p>
- <li class="subtitle"><a name="drawingprim">Drawing primitives: point, line, box, circle,...</a>
- <p>
- After we have created a Graphic Context, we can draw on a
- window using this Graphic Context, with a set of XCB
- functions, collectively called "drawing primitives". Let see
- how they are used.
- </p>
- <p>
- To draw a point, or several points, we use
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_poly_point (xcb_connection_t *c, /* The connection to the X server */
- uint8_t coordinate_mode, /* Coordinate mode, usually set to XCB_COORD_MODE_ORIGIN */
- xcb_drawable_t drawable, /* The drawable on which we want to draw the point(s) */
- xcb_gcontext_t gc, /* The Graphic Context we use to draw the point(s) */
- uint32_t points_len, /* The number of points */
- const xcb_point_t *points); /* An array of points */
-</pre>
- <p>
- The <span class="code">coordinate_mode</span> parameter
- specifies the coordinate mode. Available values are
- </p>
- <ul>
- <li><span class="code">XCB_COORD_MODE_ORIGIN</span>
- <li><span class="code">XCB_COORD_MODE_PREVIOUS</span>
- </ul>
- <p>
- If XCB_COORD_MODE_PREVIOUS is used, then all points but the first one
- are relative to the immediately previous point.
- </p>
- <p>
- The <span class="code">xcb_point_t</span> type is just a
- structure with two fields (the coordinates of the point):
- </p>
- <pre class="code">
-typedef struct {
- int16_t x;
- int16_t y;
-} xcb_point_t;
-</pre>
- <p>
- You could see an example in xpoints.c. <b>TODO</b> Set the link.
- </p>
- <p>
- To draw a line, or a polygonal line, we use
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_poly_line (xcb_connection_t *c, /* The connection to the X server */
- uint8_t coordinate_mode, /* Coordinate mode, usually set to XCB_COORD_MODE_ORIGIN */
- xcb_drawable_t drawable, /* The drawable on which we want to draw the line(s) */
- xcb_gcontext_t gc, /* The Graphic Context we use to draw the line(s) */
- uint32_t points_len, /* The number of points in the polygonal line */
- const xcb_point_t *points); /* An array of points */
-</pre>
- <p>
- This function will draw the line between the first and the
- second points, then the line between the second and the third
- points, and so on.
- </p>
- <p>
- To draw a segment, or several segments, we use
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_poly_segment (xcb_connection_t *c, /* The connection to the X server */
- xcb_drawable_t drawable, /* The drawable on which we want to draw the segment(s) */
- xcb_gcontext_t gc, /* The Graphic Context we use to draw the segment(s) */
- uint32_t segments_len, /* The number of segments */
- const xcb_segment_t *segments); /* An array of segments */
-</pre>
- <p>
- The <span class="code">xcb_segment_t</span> type is just a
- structure with four fields (the coordinates of the two points
- that define the segment):
- </p>
- <pre class="code">
-typedef struct {
- int16_t x1;
- int16_t y1;
- int16_t x2;
- int16_t y2;
-} xcb_segment_t;
-</pre>
- <p>
- To draw a rectangle, or several rectangles, we use
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_poly_rectangle (xcb_connection_t *c, /* The connection to the X server */
- xcb_drawable_t drawable, /* The drawable on which we want to draw the rectangle(s) */
- xcb_gcontext_t gc, /* The Graphic Context we use to draw the rectangle(s) */
- uint32_t rectangles_len, /* The number of rectangles */
- const xcb_rectangle_t *rectangles); /* An array of rectangles */
-</pre>
- <p>
- The <span class="code">xcb_rectangle_t</span> type is just a
- structure with four fields (the coordinates of the top-left
- corner of the rectangle, and its width and height):
- </p>
- <pre class="code">
-typedef struct {
- int16_t x;
- int16_t y;
- uint16_t width;
- uint16_t height;
-} xcb_rectangle_t;
-</pre>
- <!-- There's no coordinate_mode. Is it normal? -->
- <!-- [iano] Yes, it's not in the protocol. -->
- <p>
- To draw an elliptical arc, or several elliptical arcs, we use
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_poly_arc (xcb_connection_t *c, /* The connection to the X server */
- xcb_drawable_t drawable, /* The drawable on which we want to draw the arc(s) */
- xcb_gcontext_t gc, /* The Graphic Context we use to draw the arc(s) */
- uint32_t arcs_len, /* The number of arcs */
- const xcb_arc_t *arcs); /* An array of arcs */
-</pre>
- <p>
- The <span class="code">xcb_arc_t</span> type is a structure with
- six fields:
- </p>
- <pre class="code">
-typedef struct {
- int16_t x; /* Top left x coordinate of the rectangle surrounding the ellipse */
- int16_t y; /* Top left y coordinate of the rectangle surrounding the ellipse */
- uint16_t width; /* Width of the rectangle surrounding the ellipse */
- uint16_t height; /* Height of the rectangle surrounding the ellipse */
- int16_t angle1; /* Angle at which the arc begins */
- int16_t angle2; /* Angle at which the arc ends */
-} xcb_arc_t;
-</pre>
- <div class="emph">
- <p>
- Note: the angles are expressed in units of 1/64 of a degree,
- so to have an angle of 90 degrees, starting at 0,
- <span class="code">angle1 = 0</span> and
- <span class="code">angle2 = 90 << 6</span>. Positive angles
- indicate counterclockwise motion, while negative angles
- indicate clockwise motion.
- </p>
- </div>
- <!-- I think that (x,y) should be the center of the
- ellipse, and (width, height) the radius. It's more logical. -->
- <!-- iano: Yes, and I bet some toolkits do that.
- But the protocol (and many other graphics APIs) define arcs
- by bounding rectangles. -->
- <p>
- The corresponding function which fill inside the geometrical
- object are listed below, without further explanation, as they
- are used as the above functions.
- </p>
- <p>
- To Fill a polygon defined by the points given as arguments ,
- we use
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_fill_poly (xcb_connection_t *c,
- xcb_drawable_t drawable,
- xcb_gcontext_t gc,
- uint8_t shape,
- uint8_t coordinate_mode,
- uint32_t points_len,
- const xcb_point_t *points);
-</pre>
- <p>
- The <span class="code">shape</span> parameter specifies a
- shape that helps the server to improve performance. Available
- values are
- </p>
- <ul>
- <li><span class="code">XCB_POLY_SHAPE_COMPLEX</span>
- <li><span class="code">XCB_POLY_SHAPE_NONCONVEX</span>
- <li><span class="code">XCB_POLY_SHAPE_CONVEX</span>
- </ul>
- <p>
- To fill one or several rectangles, we use
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_poly_fill_rectangle (xcb_connection_t *c,
- xcb_drawable_t drawable,
- xcb_gcontext_t gc,
- uint32_t rectangles_len,
- const xcb_rectangle_t *rectangles);
-</pre>
- <p>
- To fill one or several arcs, we use
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_poly_fill_arc (xcb_connection_t *c,
- xcb_drawable_t drawable,
- xcb_gcontext_t gc,
- uint32_t arcs_len,
- const xcb_arc_t *arcs);
-</pre>
- <br>
- <a name="points.c"></a>
- <p>
- To illustrate these functions, here is an example that draws
- four points, a polygonal line, two segments, two rectangles
- and two arcs. Remark that we use events for the first time, as
- an introduction to the next section.
- </p>
- <p>
- <b>TODO:</b> Use screen->root_depth for depth parameter.
- </p>
- <pre class="code">
-#include <stdlib.h>
-#include <stdio.h>
-
-#include <xcb/xcb.h>
-
-int
-main ()
-{
- xcb_connection_t *c;
- xcb_screen_t *screen;
- xcb_drawable_t win;
- xcb_gcontext_t foreground;
- xcb_generic_event_t *e;
- uint32_t mask = 0;
- uint32_t values[2];
-
- /* geometric objects */
- xcb_point_t points[] = {
- {10, 10},
- {10, 20},
- {20, 10},
- {20, 20}};
-
- xcb_point_t polyline[] = {
- {50, 10},
- { 5, 20}, /* rest of points are relative */
- {25,-20},
- {10, 10}};
-
- xcb_segment_t segments[] = {
- {100, 10, 140, 30},
- {110, 25, 130, 60}};
-
- xcb_rectangle_t rectangles[] = {
- { 10, 50, 40, 20},
- { 80, 50, 10, 40}};
-
- xcb_arc_t arcs[] = {
- {10, 100, 60, 40, 0, 90 << 6},
- {90, 100, 55, 40, 0, 270 << 6}};
-
- /* Open the connection to the X server */
- c = xcb_connect (NULL, NULL);
-
- /* Get the first screen */
- screen = xcb_setup_roots_iterator (xcb_get_setup (c)).data;
-
- /* Create black (foreground) graphic context */
- win = screen->root;
-
- foreground = xcb_generate_id (c);
- mask = XCB_GC_FOREGROUND | XCB_GC_GRAPHICS_EXPOSURES;
- values[0] = screen->black_pixel;
- values[1] = 0;
- xcb_create_gc (c, foreground, win, mask, values);
-
- /* Ask for our window's Id */
- win = xcb_generate_id(c);
-
- /* Create the window */
- mask = XCB_CW_BACK_PIXEL | XCB_CW_EVENT_MASK;
- values[0] = screen->white_pixel;
- values[1] = XCB_EVENT_MASK_EXPOSURE;
- xcb_create_window (c, /* Connection */
- XCB_COPY_FROM_PARENT, /* depth */
- win, /* window Id */
- screen->root, /* parent window */
- 0, 0, /* x, y */
- 150, 150, /* width, height */
- 10, /* border_width */
- XCB_WINDOW_CLASS_INPUT_OUTPUT, /* class */
- screen->root_visual, /* visual */
- mask, values); /* masks */
-
- /* Map the window on the screen */
- xcb_map_window (c, win);
-
-
- /* We flush the request */
- xcb_flush (c);
-
- while ((e = xcb_wait_for_event (c))) {
- switch (e->response_type & ~0x80) {
- case XCB_EXPOSE: {
- /* We draw the points */
- xcb_poly_point (c, XCB_COORD_MODE_ORIGIN, win, foreground, 4, points);
-
- /* We draw the polygonal line */
- xcb_poly_line (c, XCB_COORD_MODE_PREVIOUS, win, foreground, 4, polyline);
-
- /* We draw the segements */
- xcb_poly_segment (c, win, foreground, 2, segments);
-
- /* We draw the rectangles */
- xcb_poly_rectangle (c, win, foreground, 2, rectangles);
-
- /* We draw the arcs */
- xcb_poly_arc (c, win, foreground, 2, arcs);
-
- /* We flush the request */
- xcb_flush (c);
-
- break;
- }
- default: {
- /* Unknown event type, ignore it */
- break;
- }
- }
- /* Free the Generic Event */
- free (e);
- }
-
- return 0;
-}
-</pre>
- </ol>
- <li class="title"><a name="xevents">X Events</a>
- <p>
- In an X program, everything is driven by events. Event painting
- on the screen is sometimes done as a response to an event (an
- <span class="code">Expose</span> event). If part of a program's
- window that was hidden, gets exposed (e.g. the window was raised
- above other widows), the X server will send an "expose" event to
- let the program know it should repaint that part of the
- window. User input (key presses, mouse movement, etc) is also
- received as a set of events.
- </p>
- <ol>
- <li class="subtitle"><a name="register">Registering for event types using event masks</a>
- <p>
- During the creation of a window, you should give it what kind
- of events it wishes to receive. Thus, you may register for
- various mouse (also called pointer) events, keyboard events,
- expose events, and so on. This is done for optimizing the
- server-to-client connection (i.e. why send a program (that
- might even be running at the other side of the globe) an event
- it is not interested in ?)
- </p>
- <p>
- In XCB, you use the "value_mask" and "value_list" data in the
- <span class="code">xcb_create_window()</span> function to
- register for events. Here is how we register for
- <span class="code">Expose</span> event when creating a window:
- </p>
- <pre class="code">
- mask = XCB_CW_EVENT_MASK;
- valwin[0] = XCB_EVENT_MASK_EXPOSURE;
- win = xcb_generate_id (c);
- xcb_create_window (c, depth, win, root->root,
- 0, 0, 150, 150, 10,
- XCB_WINDOW_CLASS_INPUT_OUTPUT, root->root_visual,
- mask, valwin);
-</pre>
- <p>
- <span class="code">XCB_EVENT_MASK_EXPOSURE</span> is a constant defined
- in the xcb_event_mask_t enumeration in the "xproto.h" header file. If we wanted to register for several
- event types, we can logically "or" them, as follows:
- </p>
- <pre class="code">
- mask = XCB_CW_EVENT_MASK;
- valwin[0] = XCB_EVENT_MASK_EXPOSURE | XCB_EVENT_MASK_BUTTON_PRESS;
- win = xcb_generate_id (c);
- xcb_create_window (c, depth, win, root->root,
- 0, 0, 150, 150, 10,
- XCB_WINDOW_CLASS_INPUT_OUTPUT, root->root_visual,
- mask, valwin);
-</pre>
- <p>
- This registers for <span class="code">Expose</span> events as
- well as for mouse button presses inside the created
- window. You should note that a mask may represent several
- event sub-types.
- </p>
- <p>
- The values that a mask could take are given
- by the <span class="code">xcb_cw_t</span> enumeration:
- </p>
- <pre class="code">
-typedef enum {
- XCB_CW_BACK_PIXMAP = 1L<<0,
- XCB_CW_BACK_PIXEL = 1L<<1,
- XCB_CW_BORDER_PIXMAP = 1L<<2,
- XCB_CW_BORDER_PIXEL = 1L<<3,
- XCB_CW_BIT_GRAVITY = 1L<<4,
- XCB_CW_WIN_GRAVITY = 1L<<5,
- XCB_CW_BACKING_STORE = 1L<<6,
- XCB_CW_BACKING_PLANES = 1L<<7,
- XCB_CW_BACKING_PIXEL = 1L<<8,
- XCB_CW_OVERRIDE_REDIRECT = 1L<<9,
- XCB_CW_SAVE_UNDER = 1L<<10,
- XCB_CW_EVENT_MASK = 1L<<11,
- XCB_CW_DONT_PROPAGATE = 1L<<12,
- XCB_CW_COLORMAP = 1L<<13,
- XCB_CW_CURSOR = 1L<<14
-} xcb_cw_t;
-</pre>
- <div class="emph">
- <p>Note: we must be careful when setting the values of the valwin
- parameter, as they have to follow the order the
- <span class="code">xcb_cw_t</span> enumeration. Here is an
- example:
- </p>
- </div>
- <pre class="code">
- mask = XCB_CW_EVENT_MASK | XCB_CW_BACK_PIXMAP;
- valwin[0] = XCB_NONE; /* for XCB_CW_BACK_PIXMAP (whose value is 1) */
- valwin[1] = XCB_EVENT_MASK_EXPOSURE | XCB_EVENT_MASK_BUTTON_PRESS; /* for XCB_CW_EVENT_MASK, whose value (2048) */
- /* is greater than the one of XCB_CW_BACK_PIXMAP */
-</pre>
- <p>
- If the window has already been created, we can use the
- <span class="code">xcb_change_window_attributes()</span> function to set
- the events that the window will receive. The subsection
- <a href="#winconf">Configuring a window</a> shows its
- prototype. As an example, here is a piece of code that
- configures the window to receive the
- <span class="code">Expose</span> and
- <span class="code">ButtonPress</span> events:
- </p>
- <pre class="code">
-const static uint32_t values[] = { XCB_EVENT_MASK_EXPOSURE | XCB_EVENT_MASK_BUTTON_PRESS };
-
-/* The connection c and the window win are supposed to be defined */
-
-xcb_change_window_attributes (c, win, XCB_CW_EVENT_MASK, values);
-</pre>
- <div class="emph">
- <p>
- Note: A common bug programmers do is adding code to handle new
- event types in their program, while forgetting to add the
- masks for these events in the creation of the window. Such a
- programmer then should sit down for hours debugging his
- program, wondering "Why doesn't my program notice that I
- released the button?", only to find that they registered for
- button press events but not for button release events.
- </p>
- </div>
- <li class="subtitle"><a name="loop">Receiving events: writing the events loop</a>
- <p>
- After we have registered for the event types we are interested
- in, we need to enter a loop of receiving events and handling
- them. There are two ways to receive events: a blocking way and
- a non-blocking way:
- </p>
- <ul>
- <li>
- <span class="code">xcb_wait_for_event (xcb_connection_t *c)</span>
- is the blocking way. It waits (so blocks...) until an event is
- queued in the X server. Then it retrieves it into a newly
- allocated structure (it dequeues it from the queue) and returns
- it. This structure has to be freed. The function returns
- <span class="code">NULL</span> if an error occurs.
-
- <br>
- <li>
- <span class="code">xcb_poll_for_event (xcb_connection_t *c, int
- *error)</span> is the non-blocking way. It looks at the event
- queue and returns (and dequeues too) an existing event into
- a newly allocated structure. This structure has to be
- freed. It returns <span class="code">NULL</span> if there is
- no event. If an error occurs, the parameter <span
- class="code">error</span> will be filled with the error
- status.
- </ul>
- <p>
- There are various ways to write such a loop. We present two
- ways to write such a loop, with the two functions above. The
- first one uses <span class="code">xcb_wait_for_event_t</span>, which
- is similar to an event Xlib loop using only <span
- class="code">XNextEvent</span>:
- </p>
- <pre class="code">
- xcb_generic_event_t *e;
-
- while ((e = xcb_wait_for_event (c))) {
- switch (e->response_type & ~0x80) {
- case XCB_EXPOSE: {
- /* Handle the Expose event type */
- xcb_expose_event_t *ev = (xcb_expose_event_t *)e;
-
- /* ... */
-
- break;
- }
- case XCB_BUTTON_PRESS: {
- /* Handle the ButtonPress event type */
- xcb_button_press_event_t *ev = (xcb_button_press_event_t *)e;
-
- /* ... */
-
- break;
- }
- default: {
- /* Unknown event type, ignore it */
- break;
- }
- }
- /* Free the Generic Event */
- free (e);
- }
-</pre>
- <p>
- You will certainly want to use <span
- class="code">xcb_poll_for_event(xcb_connection_t *c, int
- *error)</span> if, in Xlib, you use <span
- class="code">XPending</span> or
- <span class="code">XCheckMaskEvent</span>:
- </p>
- <pre class="code">
- while (XPending (display)) {
- XEvent ev;
-
- XNextEvent(d, &ev);
-
- /* Manage your event */
- }
-</pre>
- <p>
- Such a loop in XCB looks like:
- </p>
- <pre class="code">
- xcb_generic_event_t *ev;
-
- while ((ev = xcb_poll_for_event (conn, 0))) {
- /* Manage your event */
- }
-</pre>
- <p>
- The events are managed in the same way as with <span
- class="code">xcb_wait_for_event_t</span>.
- Obviously, we will need to give the user some way of
- terminating the program. This is usually done by handling a
- special "quit" event, as we will soon see.
- </p>
- <div class="comp">
- <div class="title">
- Comparison Xlib/XCB
- </div>
- <div class="xlib">
- <ul>
- <li>XNextEvent ()
- </ul>
- </div>
- <div class="xcb">
- <ul>
- <li>xcb_wait_for_event ()
- </ul>
- </div>
- <div class="xlib">
- <ul>
- <li>XPending ()
- <li>XCheckMaskEvent ()
- </ul>
- </div>
- <div class="xcb">
- <ul>
- <li>xcb_poll_for_event ()
- </ul>
- </div>
- </div>
- <br>
- <li class="subtitle"><a name="expose">Expose events</a>
- <p>
- The <span class="code">Expose</span> event is one of the most
- basic (and most used) events an application may receive. It
- will be sent to us in one of several cases:
- </p>
- <ul>
- <li>A window that covered part of our window has moved
- away, exposing part (or all) of our window.
- <li>Our window was raised above other windows.
- <li>Our window mapped for the first time.
- <li>Our window was de-iconified.
- </ul>
- <p>
- You should note the implicit assumption hidden here: the
- contents of our window is lost when it is being obscured
- (covered) by either windows. One may wonder why the X server
- does not save this contents. The answer is: to save
- memory. After all, the number of windows on a display at a
- given time may be very large, and storing the contents of all
- of them might require a lot of memory. Actually, there is a
- way to tell the X server to store the contents of a window in
- special cases, as we will see later.
- </p>
- <p>
- When we get an <span class="code">Expose</span> event, we
- should take the event's data from the members of the following
- structure:
- </p>
- <pre class="code">
-typedef struct {
- uint8_t response_type; /* The type of the event, here it is XCB_EXPOSE */
- uint8_t pad0;
- uint16_t sequence;
- xcb_window_t window; /* The Id of the window that receives the event (in case */
- /* our application registered for events on several windows */
- uint16_t x; /* The x coordinate of the top-left part of the window that needs to be redrawn */
- uint16_t y; /* The y coordinate of the top-left part of the window that needs to be redrawn */
- uint16_t width; /* The width of the part of the window that needs to be redrawn */
- uint16_t height; /* The height of the part of the window that needs to be redrawn */
- uint16_t count;
-} xcb_expose_event_t;
-</pre>
- <li class="subtitle"><a name="userinput">Getting user input</a>
- <p>
- User input traditionally comes from two sources: the mouse
- and the keyboard. Various event types exist to notify us of
- user input (a key being presses on the keyboard, a key being
- released on the keyboard, the mouse moving over our window,
- the mouse entering (or leaving) our window, and so on.
- </p>
- <ol>
- <li class="subsubtitle"><a name="mousepressrelease">Mouse button press and release events</a>
- <p>
- The first event type we will deal with is a mouse
- button-press (or button-release) event in our window. In
- order to register to such an event type, we should add one
- (or more) of the following masks when we create our window:
- </p>
- <ul>
- <li><span class="code">XCB_EVENT_MASK_BUTTON_PRESS</span>: notify us
- of any button that was pressed in one of our windows.
- <li><span class="code">XCB_EVENT_MASK_BUTTON_RELEASE</span>: notify us
- of any button that was released in one of our windows.
- </ul>
- <p>
- The structure to be checked for in our events loop is the
- same for these two events, and is the following:
- </p>
- <pre class="code">
-typedef struct {
- uint8_t response_type; /* The type of the event, here it is xcb_button_press_event_t or xcb_button_release_event_t */
- xcb_button_t detail;
- uint16_t sequence;
- xcb_timestamp_t time; /* Time, in milliseconds the event took place in */
- xcb_window_t root;
- xcb_window_t event;
- xcb_window_t child;
- int16_t root_x;
- int16_t root_y;
- int16_t event_x; /* The x coordinate where the mouse has been pressed in the window */
- int16_t event_y; /* The y coordinate where the mouse has been pressed in the window */
- uint16_t state; /* A mask of the buttons (or keys) during the event */
- uint8_t same_screen;
-} xcb_button_press_event_t;
-
-typedef xcb_button_press_event_t xcb_button_release_event_t;
-</pre>
- <p>
- The <span class="code">time</span> field may be used to calculate "double-click"
- situations by an application (e.g. if the mouse button was
- clicked two times in a duration shorter than a given amount
- of time, assume this was a double click).
- </p>
- <p>
- The <span class="code">state</span> field is a mask of the buttons held down during
- the event. It is a bitwise OR of any of the following (from the xcb_button_mask_t and
- xcb_mod_mask_t enumerations):
- </p>
- <ul>
- <li><span class="code">XCB_BUTTON_MASK_1</span>
- <li><span class="code">XCB_BUTTON_MASK_2</span>
- <li><span class="code">XCB_BUTTON_MASK_3</span>
- <li><span class="code">XCB_BUTTON_MASK_4</span>
- <li><span class="code">XCB_BUTTON_MASK_5</span>
- <li><span class="code">XCB_MOD_MASK_SHIFT</span>
- <li><span class="code">XCB_MOD_MASK_LOCK</span>
- <li><span class="code">XCB_MOD_MASK_CONTROL</span>
- <li><span class="code">XCB_MOD_MASK_1</span>
- <li><span class="code">XCB_MOD_MASK_2</span>
- <li><span class="code">XCB_MOD_MASK_3</span>
- <li><span class="code">XCB_MOD_MASK_4</span>
- <li><span class="code">XCB_MOD_MASK_5</span>
- </ul>
- <p>
- Their names are self explanatory, where the first 5 refer to
- the mouse buttons that are being pressed, while the rest
- refer to various "special keys" that are being pressed (Mod1
- is usually the 'Alt' key or the 'Meta' key).
- </p>
- <p>
- <b>TODO:</b> Problem: it seems that the state does not
- change when clicking with various buttons.
- </p>
- <li class="subsubtitle"><a name="mousemvnt">Mouse movement events</a>
- <p>
- Similar to mouse button press and release events, we also
- can be notified of various mouse movement events. These can
- be split into two families. One is of mouse pointer
- movement while no buttons are pressed, and the second is a
- mouse pointer motion while one (or more) of the buttons are
- pressed (this is sometimes called "a mouse drag operation",
- or just "dragging"). The following event masks may be added
- during the creation of our window:
- </p>
- <ul>
- <li><span class="code">XCB_EVENT_MASK_POINTER_MOTION</span>: events of
- the pointer moving in one of the windows controlled by our
- application, while no mouse button is held pressed.
- <li><span class="code">XCB_EVENT_MASK_BUTTON_MOTION</span>: Events of
- the pointer moving while one or more of the mouse buttons
- is held pressed.
- <li><span class="code">XCB_EVENT_MASK_BUTTON_1_MOTION</span>: same as
- <span class="code">XCB_EVENT_MASK_BUTTON_MOTION</span>, but only when
- the 1st mouse button is held pressed.
- <li><span class="code">XCB_EVENT_MASK_BUTTON_2_MOTION</span>,
- <span class="code">XCB_EVENT_MASK_BUTTON_3_MOTION</span>,
- <span class="code">XCB_EVENT_MASK_BUTTON_4_MOTION</span>,
- <span class="code">XCB_EVENT_MASK_BUTTON_5_MOTION</span>: same as
- <span class="code">XCB_EVENT_MASK_BUTTON_1_MOTION</span>, but
- respectively for 2nd, 3rd, 4th and 5th mouse button.
- </ul>
- <p>
- The structure to be checked for in our events loop is the
- same for these events, and is the following:
- </p>
- <pre class="code">
-typedef struct {
- uint8_t response_type; /* The type of the event */
- uint8_t detail;
- uint16_t sequence;
- xcb_timestamp_t time; /* Time, in milliseconds the event took place in */
- xcb_window_t root;
- xcb_window_t event;
- xcb_window_t child;
- int16_t root_x;
- int16_t root_y;
- int16_t event_x; /* The x coordinate of the mouse when the event was generated */
- int16_t event_y; /* The y coordinate of the mouse when the event was generated */
- uint16_t state; /* A mask of the buttons (or keys) during the event */
- uint8_t same_screen;
-} xcb_motion_notify_event_t;
-</pre>
- <li class="subsubtitle"><a name="mouseenter">Mouse pointer enter and leave events</a>
- <p>
- Another type of event that applications might be interested
- in, is a mouse pointer entering a window the program
- controls, or leaving such a window. Some programs use these
- events to show the user that the application is now in
- focus. In order to register for such an event type, we
- should add one (or more) of the following masks when we
- create our window:
- </p>
- <ul>
- <li><span class="code">xcb_event_enter_window_t</span>: notify us
- when the mouse pointer enters any of our controlled
- windows.
- <li><span class="code">xcb_event_leave_window_t</span>: notify us
- when the mouse pointer leaves any of our controlled
- windows.
- </ul>
- <p>
- The structure to be checked for in our events loop is the
- same for these two events, and is the following:
- </p>
- <pre class="code">
-typedef struct {
- uint8_t response_type; /* The type of the event */
- uint8_t detail;
- uint16_t sequence;
- xcb_timestamp_t time; /* Time, in milliseconds the event took place in */
- xcb_window_t root;
- xcb_window_t event;
- xcb_window_t child;
- int16_t root_x;
- int16_t root_y;
- int16_t event_x; /* The x coordinate of the mouse when the event was generated */
- int16_t event_y; /* The y coordinate of the mouse when the event was generated */
- uint16_t state; /* A mask of the buttons (or keys) during the event */
- uint8_t mode; /* The number of mouse button that was clicked */
- uint8_t same_screen_focus;
-} xcb_enter_notify_event_t;
-
-typedef xcb_enter_notify_event_t xcb_leave_notify_event_t;
-</pre>
- <li class="subsubtitle"><a name="focus">The keyboard focus</a>
- <p>
- There may be many windows on a screen, but only a single
- keyboard attached to them. How does the X server then know
- which window should be sent a given keyboard input ? This is
- done using the keyboard focus. Only a single window on the
- screen may have the keyboard focus at a given time. There
- is a XCB function that allows a program to set the keyboard
- focus to a given window. The user can usually set the
- keyboard focus using the window manager (often by clicking
- on the title bar of the desired window). Once our window
- has the keyboard focus, every key press or key release will
- cause an event to be sent to our program (if it regsitered
- for these event types...).
- </p>
- <li class="subsubtitle"><a name="keypress">Keyboard press and release events</a>
- <p>
- If a window controlled by our program currently holds the
- keyboard focus, it can receive key press and key release
- events. So, we should add one (or more) of the following
- masks when we create our window:
- </p>
- <ul>
- <li><span class="code">XCB_EVENT_MASK_KEY_PRESS</span>: notify us when
- a key was pressed while any of our controlled windows had
- the keyboard focus.
- <li><span class="code">XCB_EVENT_MASK_KEY_RELEASE</span>: notify us
- when a key was released while any of our controlled
- windows had the keyboard focus.
- </ul>
- <p>
- The structure to be checked for in our events loop is the
- same for these two events, and is the following:
- </p>
- <pre class="code">
-typedef struct {
- uint8_t response_type; /* The type of the event */
- xcb_keycode_t detail;
- uint16_t sequence;
- xcb_timestamp_t time; /* Time, in milliseconds the event took place in */
- xcb_window_t root;
- xcb_window_t event;
- xcb_window_t child;
- int16_t root_x;
- int16_t root_y;
- int16_t event_x;
- int16_t event_y;
- uint16_t state;
- uint8_t same_screen;
-} xcb_key_press_event_t;
-
-typedef xcb_key_press_event_t xcb_key_release_event_t;
-</pre>
- <p>
- The <span class="code">detail</span> field refers to the
- physical key on the keyboard.
- </p>
- <p>
- <b>TODO:</b> Talk about getting the ASCII code from the key code.
- </p>
- </ol>
- <li class="subtitle"><a name="eventex">X events: a complete example</a>
- <p>
- As an example for handling events, we show a program that
- creates a window, enters an events loop and checks for all the
- events described above, and writes on the terminal the relevant
- characteristics of the event. With this code, it should be
- easy to add drawing operations, like those which have been
- described above.
- </p>
- <pre class="code">
-#include <stdlib.h>
-#include <stdio.h>
-
-#include <xcb/xcb.h>
-
-void
-print_modifiers (uint32_t mask)
-{
- const char **mod, *mods[] = {
- "Shift", "Lock", "Ctrl", "Alt",
- "Mod2", "Mod3", "Mod4", "Mod5",
- "Button1", "Button2", "Button3", "Button4", "Button5"
- };
- printf ("Modifier mask: ");
- for (mod = mods ; mask; mask >>= 1, mod++)
- if (mask & 1)
- printf(*mod);
- putchar ('\n');
-}
-
-int
-main ()
-{
- xcb_connection_t *c;
- xcb_screen_t *screen;
- xcb_window_t win;
- xcb_generic_event_t *e;
- uint32_t mask = 0;
- uint32_t values[2];
-
- /* Open the connection to the X server */
- c = xcb_connect (NULL, NULL);
-
- /* Get the first screen */
- screen = xcb_setup_roots_iterator (xcb_get_setup (c)).data;
-
- /* Ask for our window's Id */
- win = xcb_generate_id (c);
-
- /* Create the window */
- mask = XCB_CW_BACK_PIXEL | XCB_CW_EVENT_MASK;
- values[0] = screen->white_pixel;
- values[1] = XCB_EVENT_MASK_EXPOSURE | XCB_EVENT_MASK_BUTTON_PRESS |
- XCB_EVENT_MASK_BUTTON_RELEASE | XCB_EVENT_MASK_POINTER_MOTION |
- XCB_EVENT_MASK_ENTER_WINDOW | XCB_EVENT_MASK_LEAVE_WINDOW |
- XCB_EVENT_MASK_KEY_PRESS | XCB_EVENT_MASK_KEY_RELEASE;
- xcb_create_window (c, /* Connection */
- 0, /* depth */
- win, /* window Id */
- screen->root, /* parent window */
- 0, 0, /* x, y */
- 150, 150, /* width, height */
- 10, /* border_width */
- XCB_WINDOW_CLASS_INPUT_OUTPUT, /* class */
- screen->root_visual, /* visual */
- mask, values); /* masks */
-
- /* Map the window on the screen */
- xcb_map_window (c, win);
-
- xcb_flush (c);
-
- while ((e = xcb_wait_for_event (c))) {
- switch (e->response_type & ~0x80) {
- case XCB_EXPOSE: {
- xcb_expose_event_t *ev = (xcb_expose_event_t *)e;
-
- printf ("Window %ld exposed. Region to be redrawn at location (%d,%d), with dimension (%d,%d)\n",
- ev->window, ev->x, ev->y, ev->width, ev->height);
- break;
- }
- case XCB_BUTTON_PRESS: {
- xcb_button_press_event_t *ev = (xcb_button_press_event_t *)e;
- print_modifiers(ev->state);
-
- switch (ev->detail) {
- case 4:
- printf ("Wheel Button up in window %ld, at coordinates (%d,%d)\n",
- ev->event, ev->event_x, ev->event_y);
- break;
- case 5:
- printf ("Wheel Button down in window %ld, at coordinates (%d,%d)\n",
- ev->event, ev->event_x, ev->event_y);
- break;
- default:
- printf ("Button %d pressed in window %ld, at coordinates (%d,%d)\n",
- ev->detail, ev->event, ev->event_x, ev->event_y);
- }
- break;
- }
- case XCB_BUTTON_RELEASE: {
- xcb_button_release_event_t *ev = (xcb_button_release_event_t *)e;
- print_modifiers(ev->state);
-
- printf ("Button %d released in window %ld, at coordinates (%d,%d)\n",
- ev->detail, ev->event, ev->event_x, ev->event_y);
- break;
- }
- case XCB_MOTION_NOTIFY: {
- xcb_motion_notify_event_t *ev = (xcb_motion_notify_event_t *)e;
-
- printf ("Mouse moved in window %ld, at coordinates (%d,%d)\n",
- ev->event, ev->event_x, ev->event_y);
- break;
- }
- case XCB_ENTER_NOTIFY: {
- xcb_enter_notify_event_t *ev = (xcb_enter_notify_event_t *)e;
-
- printf ("Mouse entered window %ld, at coordinates (%d,%d)\n",
- ev->event, ev->event_x, ev->event_y);
- break;
- }
- case XCB_LEAVE_NOTIFY: {
- xcb_leave_notify_event_t *ev = (xcb_leave_notify_event_t *)e;
-
- printf ("Mouse left window %ld, at coordinates (%d,%d)\n",
- ev->event, ev->event_x, ev->event_y);
- break;
- }
- case XCB_KEY_PRESS: {
- xcb_key_press_event_t *ev = (xcb_key_press_event_t *)e;
- print_modifiers(ev->state);
-
- printf ("Key pressed in window %ld\n",
- ev->event);
- break;
- }
- case XCB_KEY_RELEASE: {
- xcb_key_release_event_t *ev = (xcb_key_release_event_t *)e;
- print_modifiers(ev->state);
-
- printf ("Key released in window %ld\n",
- ev->event);
- break;
- }
- default:
- /* Unknown event type, ignore it */
- printf("Unknown event: %d\n", e->response_type);
- break;
- }
- /* Free the Generic Event */
- free (e);
- }
-
- return 0;
-}
-</pre>
- </ol>
- <li class="title"><a name="font">Handling text and fonts</a>
- <p>
- Besides drawing graphics on a window, we often want to draw
- text. Text strings have two major properties: the characters to
- be drawn and the font with which they are drawn. In order to
- draw text, we need to first request the X server to load a
- font. We then assign a font to a Graphic Context, and finally, we
- draw the text in a window, using the Graphic Context.
- </p>
- <ol>
- <li class="subtitle"><a name="fontstruct">The Font structure</a>
- <p>
- In order to support flexible fonts, a font type is
- defined. You know what ? It's an Id:
- </p>
- <pre class="code">
-typedef uint32_t xcb_font_t;
-</pre>
- <p>
- It is used to contain information about a font, and is passed
- to several functions that handle fonts selection and text drawing.
- We ask the X server to attribute an Id to our font with the
- function:
- </p>
- <pre class="code">
-xcb_font_t xcb_generate_id (xcb_connection_t *c);
-</pre>
- <br>
- <li class="subtitle"><a name="openingfont">Opening a Font</a>
- <p>
- To open a font, we use the following function:
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_open_font (xcb_connection_t *c,
- xcb_font_t fid,
- uint16_t name_len,
- const char *name);
-</pre>
- <p>
- The <span class="code">fid</span> parameter is the font Id
- defined by <span class="code">xcb_generate_id()</span> (see
- above). The <span class="code">name</span> parameter is the
- name of the font you want to open. Use the command
- <span class="code">xlsfonts</span> in a terminal to know which
- are the fonts available on your computer. The parameter
- <span class="code">name_len</span> is the length of the name
- of the font (given by <span class="code">strlen()</span>).
- </p>
- <li class="subtitle"><a name="assigningfont">Assigning a Font to a Graphic Context</a>
- <p>
- Once a font is opened, you have to create a Graphic Context
- that will contain the informations about the color of the
- foreground and the background used when you draw a text in a
- Drawable. Here is an exemple of a Graphic Context that will
- allow us to draw an opened font with a black foreground and a
- white background:
- </p>
- <pre class="code">
- /*
- * c is the connection
- * screen is the screen where the window is displayed
- * window is the window in which we will draw the text
- * font is the opened font
- */
-
- uint32_t value_list[3];
- xcb_gcontext_t gc;
- uint32_t mask;
-
- gc = xcb_generate_id (c);
- mask = XCB_GC_FOREGROUND | XCB_GC_BACKGROUND | XCB_GC_FONT;
- value_list[0] = screen->black_pixel;
- value_list[1] = screen->white_pixel;
- value_list[2] = font;
- xcb_create_gc (c, gc, window, mask, value_list);
-
- /* The font is not needed anymore, so we close it */
- xcb_close_font (c, font);
-</pre>
- <li class="subtitle"><a name="drawingtext">Drawing text in a drawable</a>
- <p>
- To draw a text in a drawable, we use the following function:
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_image_text_8 (xcb_connection_t *c,
- uint8_t string_len,
- xcb_drawable_t drawable,
- xcb_gcontext_t gc,
- int16_t x,
- int16_t y,
- const char *string);
-</pre>
- <p>
- The <span class="code">string</span> parameter is the text to
- draw. The location of the drawing is given by the parameters
- <span class="code">x</span> and <span class="code">y</span>.
- The base line of the text is exactly the parameter
- <span class="code">y</span>.
- </p>
- <li class="subtitle"><a name="fontcompleteexample">Complete example</a>
- <p>
- This example draw a text at 10 pixels (for the base line) of
- the bottom of a window. Pressing the Esc key exits the program.
- </p>
- <pre class="code">
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include <xcb/xcb.h>
-
-#define WIDTH 300
-#define HEIGHT 100
-
-
-
-static xcb_gc_t gc_font_get (xcb_connection_t *c,
- xcb_screen_t *screen,
- xcb_window_t window,
- const char *font_name);
-
-static void text_draw (xcb_connection_t *c,
- xcb_screen_t *screen,
- xcb_window_t window,
- int16_t x1,
- int16_t y1,
- const char *label);
-
-static void
-text_draw (xcb_connection_t *c,
- xcb_screen_t *screen,
- xcb_window_t window,
- int16_t x1,
- int16_t y1,
- const char *label)
-{
- xcb_void_cookie_t cookie_gc;
- xcb_void_cookie_t cookie_text;
- xcb_generic_error_t *error;
- xcb_gcontext_t gc;
- uint8_t length;
-
- length = strlen (label);
-
- gc = gc_font_get(c, screen, window, "7x13");
-
- cookie_text = xcb_image_text_8_checked (c, length, window, gc,
- x1,
- y1, label);
- error = xcb_request_check (c, cookie_text);
- if (error) {
- fprintf (stderr, "ERROR: can't paste text : %d\n", error->error_code);
- xcb_disconnect (c);
- exit (-1);
- }
-
- cookie_gc = xcb_free_gc (c, gc);
- error = xcb_request_check (c, cookie_gc);
- if (error) {
- fprintf (stderr, "ERROR: can't free gc : %d\n", error->error_code);
- xcb_disconnect (c);
- exit (-1);
- }
-}
-
-static xcb_gc_t
-gc_font_get (xcb_connection_t *c,
- xcb_screen_t *screen,
- xcb_window_t window,
- const char *font_name)
-{
- uint32_t value_list[3];
- xcb_void_cookie_t cookie_font;
- xcb_void_cookie_t cookie_gc;
- xcb_generic_error_t *error;
- xcb_font_t font;
- xcb_gcontext_t gc;
- uint32_t mask;
-
- font = xcb_generate_id (c);
- cookie_font = xcb_open_font_checked (c, font,
- strlen (font_name),
- font_name);
-
- error = xcb_request_check (c, cookie_font);
- if (error) {
- fprintf (stderr, "ERROR: can't open font : %d\n", error->error_code);
- xcb_disconnect (c);
- return -1;
- }
-
- gc = xcb_generate_id (c);
- mask = XCB_GC_FOREGROUND | XCB_GC_BACKGROUND | XCB_GC_FONT;
- value_list[0] = screen->black_pixel;
- value_list[1] = screen->white_pixel;
- value_list[2] = font;
- cookie_gc = xcb_create_gc_checked (c, gc, window, mask, value_list);
- error = xcb_request_check (c, cookie_gc);
- if (error) {
- fprintf (stderr, "ERROR: can't create gc : %d\n", error->error_code);
- xcb_disconnect (c);
- exit (-1);
- }
-
- cookie_font = xcb_close_font_checked (c, font);
- error = xcb_request_check (c, cookie_font);
- if (error) {
- fprintf (stderr, "ERROR: can't close font : %d\n", error->error_code);
- xcb_disconnect (c);
- exit (-1);
- }
-
- return gc;
-}
-
-int main ()
-{
- xcb_screen_iterator_t screen_iter;
- xcb_connection_t *c;
- const xcb_setup_t *setup;
- xcb_screen_t *screen;
- xcb_generic_event_t *e;
- xcb_generic_error_t *error;
- xcb_void_cookie_t cookie_window;
- xcb_void_cookie_t cookie_map;
- xcb_window_t window;
- uint32_t mask;
- uint32_t values[2];
- int screen_number;
-
- /* getting the connection */
- c = xcb_connect (NULL, &screen_number);
- if (!c) {
- fprintf (stderr, "ERROR: can't connect to an X server\n");
- return -1;
- }
-
- /* getting the current screen */
- setup = xcb_get_setup (c);
-
- screen = NULL;
- screen_iter = xcb_setup_roots_iterator (setup);
- for (; screen_iter.rem != 0; --screen_number, xcb_screen_next (&screen_iter))
- if (screen_number == 0)
- {
- screen = screen_iter.data;
- break;
- }
- if (!screen) {
- fprintf (stderr, "ERROR: can't get the current screen\n");
- xcb_disconnect (c);
- return -1;
- }
-
- /* creating the window */
- window = xcb_generate_id (c);
- mask = XCB_CW_BACK_PIXEL | XCB_CW_EVENT_MASK;
- values[0] = screen->white_pixel;
- values[1] =
- XCB_EVENT_MASK_KEY_RELEASE |
- XCB_EVENT_MASK_BUTTON_PRESS |
- XCB_EVENT_MASK_EXPOSURE |
- XCB_EVENT_MASK_POINTER_MOTION;
- cookie_window = xcb_create_window_checked (c,
- screen->root_depth,
- window, screen->root,
- 20, 200, WIDTH, HEIGHT,
- 0, XCB_WINDOW_CLASS_INPUT_OUTPUT,
- screen->root_visual,
- mask, values);
- cookie_map = xcb_map_window_checked (c, window);
-
- /* error managing */
- error = xcb_request_check (c, cookie_window);
- if (error) {
- fprintf (stderr, "ERROR: can't create window : %d\n", error->error_code);
- xcb_disconnect (c);
- return -1;
- }
- error = xcb_request_check (c, cookie_map);
- if (error) {
- fprintf (stderr, "ERROR: can't map window : %d\n", error->error_code);
- xcb_disconnect (c);
- return -1;
- }
-
- xcb_flush(c);
-
- while (1) {
- e = xcb_poll_for_event(c);
- if (e) {
- switch (e->response_type & ~0x80) {
- case XCB_EXPOSE: {
- char *text;
-
- text = "Press ESC key to exit...";
- text_draw (c, screen, window, 10, HEIGHT - 10, text);
- break;
- }
- case XCB_KEY_RELEASE: {
- xcb_key_release_event_t *ev;
-
- ev = (xcb_key_release_event_t *)e;
-
- switch (ev->detail) {
- /* ESC */
- case 9:
- free (e);
- xcb_disconnect (c);
- return 0;
- }
- }
- }
- free (e);
- }
- }
-
- return 0;
-}
-</pre>
- </ol>
- <li class="title"><a name="wm">Interacting with the window manager</a>
- <p>
- After we have seen how to create windows and draw on them, we
- take one step back, and look at how our windows are interacting
- with their environment (the full screen and the other
- windows). First of all, our application needs to interact with
- the window manager. The window manager is responsible to
- decorating drawn windows (i.e. adding a frame, an iconify
- button, a system menu, a title bar, etc), as well as handling
- icons shown when windows are being iconified. It also handles
- ordering of windows on the screen, and other administrative
- tasks. We need to give it various hints as to how we want it to
- treat our application's windows.
- </p>
- <ol>
- <li class="subtitle"><a name="wmprop">Window properties</a>
- <p>
- Many of the parameters communicated to the window manager are
- passed using data called "properties". These properties are
- attached by the X server to different windows, and are stored
- in a format that makes it possible to read them from different
- machines that may use different architectures (remember that
- an X client program may run on a remote machine).
- </p>
- <p>
- The property and its type (a string, an integer, etc) are
- Id. Their type are <span class="code">xcb_atom_t</span>:
- </p>
- <pre class="code">
-typedef uint32_t xcb_atom_t;
-</pre>
- <p>
- To change the property of a window, we use the following
- function:
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_change_property (xcb_connection_t *c, /* Connection to the X server */
- uint8_t mode, /* Property mode */
- xcb_window_t window, /* Window */
- xcb_atom_t property, /* Property to change */
- xcb_atom_t type, /* Type of the property */
- uint8_t format, /* Format of the property (8, 16, 32) */
- uint32_t data_len, /* Length of the data parameter */
- const void *data); /* Data */
-</pre>
- <p>
- The <span class="code">mode</span> parameter coud be one of
- the following values (defined in enumeration xcb_prop_mode_t in
- the xproto.h header file):
- </p>
- <ul>
- <li>XCB_PROP_MODE_REPLACE
- <li>XCB_PROP_MODE_PREPEND
- <li>XCB_PROP_MODE_APPEND
- </ul>
- <br>
- <li class="subtitle"><a name="wmname">Setting the window name and icon name</a>
- <p>
- The first thing we want to do would be to set the name for our
- window. This is done using the
- <span class="code">xcb_change_property()</span> function. This
- name may be used by the window manager as the title of the
- window (in the title bar), in a task list, etc. The property
- atom to use to set the name of a window is
- <span class="code">WM_NAME</span> (and
- <span class="code">WM_ICON_NAME</span> for the iconified
- window) and its type is <span class="code">STRING</span>. Here
- is an example of utilization:
- </p>
- <pre class="code">
-#include <string.h>
-
-#include <xcb/xcb.h>
-#include <xcb/xcb_atom.h>
-
-int
-main ()
-{
- xcb_connection_t *c;
- xcb_screen_t *screen;
- xcb_window_t win;
- char *title = "Hello World !";
- char *title_icon = "Hello World ! (iconified)";
-
-
-
- /* Open the connection to the X server */
- c = xcb_connect (NULL, NULL);
-
- /* Get the first screen */
- screen = xcb_setup_roots_iterator (xcb_get_setup (c)).data;
-
- /* Ask for our window's Id */
- win = xcb_generate_id (c);
-
- /* Create the window */
- xcb_create_window (c, /* Connection */
- 0, /* depth */
- win, /* window Id */
- screen->root, /* parent window */
- 0, 0, /* x, y */
- 250, 150, /* width, height */
- 10, /* border_width */
- XCB_WINDOW_CLASS_INPUT_OUTPUT, /* class */
- screen->root_visual, /* visual */
- 0, NULL); /* masks, not used */
-
- /* Set the title of the window */
- xcb_change_property (c, XCB_PROP_MODE_REPLACE, win,
- WM_NAME, STRING, 8,
- strlen (title), title);
-
- /* Set the title of the window icon */
- xcb_change_property (c, XCB_PROP_MODE_REPLACE, win,
- WM_ICON_NAME, STRING, 8,
- strlen(title_icon), title_icon);
-
- /* Map the window on the screen */
- xcb_map_window (c, win);
-
- xcb_flush (c);
-
- while (1) {}
-
- return 0;
-}
-</pre>
- <div class="emph">
- <p>Note: the use of the atoms needs our program to be compiled
- and linked against xcb_atom, so that we have to use
- </p>
- </div>
- <pre class="text">
-gcc prog.c -o prog `pkg-config --cflags --libs xcb_atom`
-</pre>
- <div class="emph">
- <p>
- for the program to compile fine.
- </p>
- </div>
- </ol>
- <li class="title"><a name="winop">Simple window operations</a>
- <p>
- One more thing we can do to our window is manipulate them on the
- screen (resize them, move them, raise or lower them, iconify
- them, and so on). Some window operations functions are supplied
- by XCB for this purpose.
- </p>
- <ol>
- <li class="subtitle"><a name="winmap">Mapping and un-mapping a window</a>
- <p>
- The first pair of operations we can apply on a window is
- mapping it, or un-mapping it. Mapping a window causes the
- window to appear on the screen, as we have seen in our simple
- window program example. Un-mapping it causes it to be removed
- from the screen (although the window as a logical entity still
- exists). This gives the effect of making a window hidden
- (unmapped) and shown again (mapped). For example, if we have a
- dialog box window in our program, instead of creating it every
- time the user asks to open it, we can create the window once,
- in an un-mapped mode, and when the user asks to open it, we
- simply map the window on the screen. When the user clicked the
- 'OK' or 'Cancel' button, we simply un-map the window. This is
- much faster than creating and destroying the window, however,
- the cost is wasted resources, both on the client side, and on
- the X server side.
- </p>
- <p>
- To map a window, you use the following function:
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_map_window (xcb_connection_t *c,
- xcb_window_t window);
-</pre>
- <p>
- To have a simple example, see the <a href="#helloworld">example</a>
- above. The mapping operation will cause an
- <span class="code">Expose</span> event to be sent to our
- application, unless the window is completely covered by other
- windows.
- </p>
- <p>
- Un-mapping a window is also simple. You use the function
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_unmap_window (xcb_connection_t *c,
- xcb_window_t window);
-</pre>
- <p>
- The utilization of this function is the same as
- <span class="code">xcb_map_window()</span>.
- </p>
- <li class="subtitle"><a name="winconf">Configuring a window</a>
- <p>
- As we have seen when we have created our first window, in the
- X Events subsection, we can set some attributes for the window
- (that is, the position, the size, the events the window will
- receive, etc). If we want to modify them, but the window is
- already created, we can change them by using the following
- function:
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_configure_window (xcb_connection_t *c, /* The connection to the X server*/
- xcb_window_t window, /* The window to configure */
- uint16_t value_mask, /* The mask */
- const uint32_t *value_list); /* The values to set */
-</pre>
- <p>
- We set the <span class="code">value_mask</span> to one or
- several mask values that are in the xcb_config_window_t enumeration in the xproto.h header:
- </p>
- <ul>
- <li><span class="code">XCB_CONFIG_WINDOW_X</span>: new x coordinate of the window's top left corner
- <li><span class="code">XCB_CONFIG_WINDOW_Y</span>: new y coordinate of the window's top left corner
- <li><span class="code">XCB_CONFIG_WINDOW_WIDTH</span>: new width of the window
- <li><span class="code">XCB_CONFIG_WINDOW_HEIGHT</span>: new height of the window
- <li><span class="code">XCB_CONFIG_WINDOW_BORDER_WIDTH</span>: new width of the border of the window
- <li><span class="code">XCB_CONFIG_WINDOW_SIBLING</span>
- <li><span class="code">XCB_CONFIG_WINDOW_STACK_MODE</span>: the new stacking order
- </ul>
- <p>
- We then give to <span class="code">value_mask</span> the new
- value. We now describe how to use
- <span class="code">xcb_configure_window_t</span> in some useful
- situations.
- </p>
- <li class="subtitle"><a name="winmove">Moving a window around the screen</a>
- <p>
- An operation we might want to do with windows is to move them
- to a different location. This can be done like this:
- </p>
- <pre class="code">
-const static uint32_t values[] = { 10, 20 };
-
-/* The connection c and the window win are supposed to be defined */
-
-/* Move the window to coordinates x = 10 and y = 20 */
-xcb_configure_window (c, win, XCB_CONFIG_WINDOW_X | XCB_CONFIG_WINDOW_Y, values);
-</pre>
- <p>
- Note that when the window is moved, it might get partially
- exposed or partially hidden by other windows, and thus we
- might get <span class="code">Expose</span> events due to this
- operation.
- </p>
- <li class="subtitle"><a name="winsize">Resizing a window</a>
- <p>
- Yet another operation we can do is to change the size of a
- window. This is done using the following code:
- </p>
- <pre class="code">
-const static uint32_t values[] = { 200, 300 };
-
-/* The connection c and the window win are supposed to be defined */
-
-/* Resize the window to width = 10 and height = 20 */
-xcb_configure_window (c, win, XCB_CONFIG_WINDOW_WIDTH | XCB_CONFIG_WINDOW_HEIGHT, values);
-</pre>
- <p>
- We can also combine the move and resize operations using one
- single call to <span class="code">xcb_configure_window_t</span>:
- </p>
- <pre class="code">
-const static uint32_t values[] = { 10, 20, 200, 300 };
-
-/* The connection c and the window win are supposed to be defined */
-
-/* Move the window to coordinates x = 10 and y = 20 */
-/* and resize the window to width = 10 and height = 20 */
-xcb_configure_window (c, win, XCB_CONFIG_WINDOW_X | XCB_CONFIG_WINDOW_Y | XCB_CONFIG_WINDOW_WIDTH | XCB_CONFIG_WINDOW_HEIGHT, values);
-</pre>
- <li class="subtitle"><a name="winstack">Changing windows stacking order: raise and lower</a>
- <p>
- Until now, we changed properties of a single window. We'll see
- that there are properties that relate to the window and other
- windows. One of them is the stacking order. That is, the order
- in which the windows are layered on top of each other. The
- front-most window is said to be on the top of the stack, while
- the back-most window is at the bottom of the stack. Here is
- how to manipulate our windows stack order:
- </p>
- <pre class="code">
-const static uint32_t values[] = { XCB_STACK_MODE_ABOVE };
-
-/* The connection c and the window win are supposed to be defined */
-
-/* Move the window on the top of the stack */
-xcb_configure_window (c, win, XCB_CONFIG_WINDOW_STACK_MODE, values);
-</pre>
- <pre class="code">
-const static uint32_t values[] = { XCB_STACK_MODE_BELOW };
-
-/* The connection c and the window win are supposed to be defined */
-
-/* Move the window on the bottom of the stack */
-xcb_configure_window (c, win, XCB_CONFIG_WINDOW_STACK_MODE, values);
-</pre>
- <li class="subtitle"><a name="wingetinfo">Getting information about a window</a>
- <p>
- Just like we can set various attributes of our windows, we can
- also ask the X server supply the current values of these
- attributes. For example, we can check where a window is
- located on the screen, what is its current size, whether it is
- mapped or not, etc. The structure that contains some of this
- information is
- </p>
- <pre class="code">
-typedef struct {
- uint8_t response_type;
- uint8_t depth; /* depth of the window */
- uint16_t sequence;
- uint32_t length;
- xcb_window_t root; /* Id of the root window *>
- int16_t x; /* X coordinate of the window's location */
- int16_t y; /* Y coordinate of the window's location */
- uint16_t width; /* Width of the window */
- uint16_t height; /* Height of the window */
- uint16_t border_width; /* Width of the window's border */
-} xcb_get_geometry_reply_t;
-</pre>
- <p>
- XCB fill this structure with two functions:
- </p>
- <pre class="code">
-xcb_get_geometry_cookie_t xcb_get_geometry (xcb_connection_t *c,
- xcb_drawable_t drawable);
-xcb_get_geometry_reply_t *xcb_get_geometry_reply (xcb_connection_t *c,
- xcb_get_geometry_cookie_t cookie,
- xcb_generic_error_t **e);
-</pre>
- <p>
- You use them as follows:
- </p>
- <pre class="code">
- xcb_connection_t *c;
- xcb_drawable_t win;
- xcb_get_geometry_reply_t *geom;
-
- /* You initialize c and win */
-
- geom = xcb_get_geometry_reply (c, xcb_get_geometry (c, win), NULL);
-
- /* Do something with the fields of geom */
-
- free (geom);
-</pre>
- <p>
- Remark that you have to free the structure, as
- <span class="code">xcb_get_geometry_reply_t</span> allocates a
- newly one.
- </p>
- <p>
- One problem is that the returned location of the window is
- relative to its parent window. This makes these coordinates
- rather useless for any window manipulation functions, like
- moving it on the screen. In order to overcome this problem, we
- need to take a two-step operation. First, we find out the Id
- of the parent window of our window. We then translate the
- above relative coordinates to the screen coordinates.
- </p>
- <p>
- To get the Id of the parent window, we need this structure:
- </p>
- <pre class="code">
-typedef struct {
- uint8_t response_type;
- uint8_t pad0;
- uint16_t sequence;
- uint32_t length;
- xcb_window_t root;
- xcb_window_t parent; /* Id of the parent window */
- uint16_t children_len;
- uint8_t pad1[14];
-} xcb_query_tree_reply_t;
-</pre>
- <p>
- To fill this structure, we use these two functions:
- </p>
- <pre class="code">
-xcb_query_tree_cookie_t xcb_query_tree (xcb_connection_t *c,
- xcb_window_t window);
-xcb_query_tree_reply_t *xcb_query_tree_reply (xcb_connection_t *c,
- xcb_query_tree_cookie_t cookie,
- xcb_generic_error_t **e);
-</pre>
- <p>
- The translated coordinates will be found in this structure:
- </p>
- <pre class="code">
-typedef struct {
- uint8_t response_type;
- uint8_t same_screen;
- uint16_t sequence;
- uint32_t length;
- xcb_window_t child;
- uint16_t dst_x; /* Translated x coordinate */
- uint16_t dst_y; /* Translated y coordinate */
-} xcb_translate_coordinates_reply_t;
-</pre>
- <p>
- As usual, we need two functions to fill this structure:
- </p>
- <pre class="code">
-xcb_translate_coordinates_cookie_t xcb_translate_coordinates (xcb_connection_t *c,
- xcb_window_t src_window,
- xcb_window_t dst_window,
- int16_t src_x,
- int16_t src_y);
-xcb_translate_coordinates_reply_t *xcb_translate_coordinates_reply (xcb_connection_t *c,
- xcb_translate_coordinates_cookie_t cookie,
- xcb_generic_error_t **e);
-</pre>
- <p>
- We use them as follows:
- </p>
- <pre class="code">
- xcb_connection_t *c;
- xcb_drawable_t win;
- xcb_get_geometry_reply_t *geom;
- xcb_query_tree_reply_t *tree;
- xcb_translate_coordinates_reply_t *trans;
-
- /* You initialize c and win */
-
- geom = xcb_get_geometry_reply (c, xcb_get_geometry (c, win), NULL);
- if (!geom)
- return 0;
-
- tree = xcb_query_tree_reply (c, xcb_query_tree (c, win), NULL);
- if (!tree)
- return 0;
-
- trans = xcb_translate_coordinates_reply (c,
- xcb_translate_coordinates (c,
- win,
- tree->parent,
- geom->x, geom->y),
- NULL);
- if (!trans)
- return 0;
-
- /* the translated coordinates are in trans->dst_x and trans->dst_y */
-
- free (trans);
- free (tree);
- free (geom);
-</pre>
- <p>
- Of course, as for <span class="code">geom</span>,
- <span class="code">tree</span> and
- <span class="code">trans</span> have to be freed.
- </p>
- <p>
- The work is a bit hard, but XCB is a very low-level library.
- </p>
- <p>
- <b>TODO:</b> the utilization of these functions should be a
- prog, which displays the coordinates of the window.
- </p>
- <p>
- There is another structure that gives informations about our window:
- </p>
- <pre class="code">
-typedef struct {
- uint8_t response_type;
- uint8_t backing_store;
- uint16_t sequence;
- uint32_t length;
- xcb_visualid_t visual; /* Visual of the window */
- uint16_t _class;
- uint8_t bit_gravity;
- uint8_t win_gravity;
- uint32_t backing_planes;
- uint32_t backing_pixel;
- uint8_t save_under;
- uint8_t map_is_installed;
- uint8_t map_state; /* Map state of the window */
- uint8_t override_redirect;
- xcb_colormap_t colormap; /* Colormap of the window */
- uint32_t all_event_masks;
- uint32_t your_event_mask;
- uint16_t do_not_propagate_mask;
-} xcb_get_window_attributes_reply_t;
-</pre>
- <p>
- XCB supplies these two functions to fill it:
- </p>
- <pre class="code">
-xcb_get_window_attributes_cookie_t xcb_get_window_attributes (xcb_connection_t *c,
- xcb_window_t window);
-xcb_get_window_attributes_reply_t *xcb_get_window_attributes_reply (xcb_connection_t *c,
- xcb_get_window_attributes_cookie_t cookie,
- xcb_generic_error_t **e);
-</pre>
- <p>
- You use them as follows:
- </p>
- <pre class="code">
- xcb_connection_t *c;
- xcb_drawable_t win;
- xcb_get_window_attributes_reply_t *attr;
-
- /* You initialize c and win */
-
- attr = xcb_get_window_attributes_reply (c, xcb_get_window_attributes (c, win), NULL);
-
- if (!attr)
- return 0;
-
- /* Do something with the fields of attr */
-
- free (attr);
-</pre>
- <p>
- As for <span class="code">geom</span>,
- <span class="code">attr</span> has to be freed.
- </p>
- </ol>
- <li class="title"><a name="usecolor">Using colors to paint the rainbow</a>
- <p>
- Up until now, all our painting operation were done using black
- and white. We will (finally) see now how to draw using colors.
- </p>
- <ol>
- <li class="subtitle"><a name="colormap">Color maps</a>
- <p>
- In the beginning, there were not enough colors. Screen
- controllers could only support a limited number of colors
- simultaneously (initially 2, then 4, 16 and 256). Because of
- this, an application could not just ask to draw in a "light
- purple-red" color, and expect that color to be available. Each
- application allocated the colors it needed, and when all the
- color entries (4, 16, 256 colors) were in use, the next color
- allocation would fail.
- </p>
- <p>
- Thus, the notion of "a color map" was introduced. A color map
- is a table whose size is the same as the number of
- simultaneous colors a given screen controller. Each entry
- contained the RGB (Red, Green and Blue) values of a different
- color (all colors can be drawn using some combination of red,
- green and blue). When an application wants to draw on the
- screen, it does not specify which color to use. Rather, it
- specifies which color entry of some color map to be used
- during this drawing. Change the value in this color map entry
- and the drawing will use a different color.
- </p>
- <p>
- In order to be able to draw using colors that got something to
- do with what the programmer intended, color map allocation
- functions are supplied. You could ask to allocate entry for a
- color with a set of RGB values. If one already existed, you
- would get its index in the table. If none existed, and the
- table was not full, a new cell would be allocated to contain
- the given RGB values, and its index returned. If the table was
- full, the procedure would fail. You could then ask to get a
- color map entry with a color that is closest to the one you
- were asking for. This would mean that the actual drawing on
- the screen would be done using colors similar to what you
- wanted, but not the same.
- </p>
- <p>
- On today's more modern screens where one runs an X server with
- support for 16 million colors, this limitation looks a little
- silly, but remember that there are still older computers with
- older graphics cards out there. Using color map, support for
- these screen becomes transparent to you. On a display
- supporting 16 million colors, any color entry allocation
- request would succeed. On a display supporting a limited
- number of colors, some color allocation requests would return
- similar colors. It won't look as good, but your application
- would still work.
- </p>
- <li class="subtitle"><a name="colormapalloc">Allocating and freeing Color Maps</a>
- <p>
- When you draw using XCB, you can choose to use the standard
- color map of the screen your window is displayed on, or you
- can allocate a new color map and apply it to a window. In the
- latter case, each time the mouse moves onto your window, the
- screen color map will be replaced by your window's color map,
- and you'll see all the other windows on screen change their
- colors into something quite bizzare. In fact, this is the
- effect you get with X applications that use the "-install"
- command line option.
- </p>
- <p>
- In XCB, a color map is (as often in X) an Id:
- </p>
- <pre class="code">
-typedef uint32_t xcb_colormap_t;
-</pre>
- <p>
- In order to access the screen's default color map, you just
- have to retrieve the <span class="code">default_colormap</span>
- field of the <span class="code">xcb_screen_t</span> structure
- (see Section
- <a href="#screen">Checking basic information about a connection</a>):
- </p>
- <pre class="code">
-#include <stdio.h>
-
-#include <xcb/xcb.h>
-
-int
-main ()
-{
- xcb_connection_t *c;
- xcb_screen_t *screen;
- xcb_colormap_t colormap;
-
- /* Open the connection to the X server and get the first screen */
- c = xcb_connect (NULL, NULL);
- screen = xcb_setup_roots_iterator (xcb_get_setup (c)).data;
-
- colormap = screen->default_colormap;
-
- return 0;
-}
-</pre>
- <p>
- This will return the color map used by default on the first
- screen (again, remember that an X server may support several
- different screens, each of which might have its own resources).
- </p>
- <p>
- The other option, that of allocating a new colormap, works as
- follows. We first ask the X server to give an Id to our color
- map, with this function:
- </p>
- <pre class="code">
-xcb_colormap_t xcb_generate_id (xcb_connection_t *c);
-</pre>
- <p>
- Then, we create the color map with
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_create_colormap (xcb_connection_t *c, /* Pointer to the xcb_connection_t structure */
- uint8_t alloc, /* Colormap entries to be allocated (AllocNone or AllocAll) */
- xcb_colormap_t mid, /* Id of the color map */
- xcb_window_t window, /* Window on whose screen the colormap will be created */
- xcb_visualid_t visual); /* Id of the visual supported by the screen */
-</pre>
- <p>
- Here is an example of creation of a new color map:
- </p>
- <pre class="code">
-#include <xcb/xcb.h>
-
-int
-main ()
-{
- xcb_connection_t *c;
- xcb_screen_t *screen;
- xcb_window_t win;
- xcb_colormap_t cmap
-
- /* Open the connection to the X server and get the first screen */
- c = xcb_connect (NULL, NULL);
- screen = xcb_setup_roots_iterator (xcb_get_setup (c)).data;
-
- /* We create the window win here*/
-
- cmap = xcb_generate_id (c);
- xcb_create_colormap (c, XCB_COLORMAP_ALLOC_NONE, cmap, win, screen->root_visual);
-
- return 0;
-}
-</pre>
- <p>
- Note that the window parameter is only used to allow the X
- server to create the color map for the given screen. We can
- then use this color map for any window drawn on the same screen.
- </p>
- <p>
- To free a color map, it suffices to use this function:
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_free_colormap (xcb_connection_t *c, /* The connection */
- xcb_colormap_t cmap); /* The color map */
-</pre>
- <div class="comp">
- <div class="title">
- Comparison Xlib/XCB
- </div>
- <div class="xlib">
- <ul>
- <li>XCreateColormap ()
- </ul>
- </div>
- <div class="xcb">
- <ul>
- <li>xcb_generate_id ()
- <li>xcb_create_colormap ()
- </ul>
- </div>
- <div class="xlib">
- <ul>
- <li>XFreeColormap ()
- </ul>
- </div>
- <div class="xcb">
- <ul>
- <li>xcb_free_colormap ()
- </ul>
- </div>
- </div>
- <br>
- <li class="subtitle"><a name="alloccolor">Allocating and freeing a color entry</a>
- <p>
- Once we got access to some color map, we can start allocating
- colors. The informations related to a color are stored in the
- following structure:
- </p>
- <pre class="code">
-typedef struct {
- uint8_t response_type;
- uint8_t pad0;
- uint16_t sequence;
- uint32_t length;
- uint16_t red; /* The red component */
- uint16_t green; /* The green component */
- uint16_t blue; /* The blue component */
- uint8_t pad1[2];
- uint32_t pixel; /* The entry in the color map, supplied by the X server */
-} xcb_alloc_color_reply_t;
-</pre>
- <p>
- XCB supplies these two functions to fill it:
- </p>
- <pre class="code">
-xcb_alloc_color_cookie_t xcb_alloc_color (xcb_connection_t *c,
- xcb_colormap_t cmap,
- uint16_t red,
- uint16_t green,
- uint16_t blue);
-xcb_alloc_color_reply_t *xcb_alloc_color_reply (xcb_connection_t *c,
- xcb_alloc_color_cookie_t cookie,
- xcb_generic_error_t **e);
-</pre>
- <p>
- The fuction <span class="code">xcb_alloc_color()</span> takes the
- 3 RGB components as parameters (red, green and blue). Here is an
- example of using these functions:
- </p>
- <pre class="code">
-#include <malloc.h>
-
-#include <xcb/xcb.h>
-
-int
-main ()
-{
- xcb_connection_t *c;
- xcb_screen_t *screen;
- xcb_window_t win;
- xcb_colormap_t cmap;
- xcb_alloc_color_reply_t *rep;
-
- /* Open the connection to the X server and get the first screen */
- c = xcb_connect (NULL, NULL);
- screen = xcb_setup_roots_iterator (xcb_get_setup (c)).data;
-
- /* We create the window win here*/
-
- cmap = xcb_generate_id (c);
- xcb_create_colormap (c, XCB_COLORMAP_ALLOC_NONE, cmap, win, screen->root_visual);
-
- rep = xcb_alloc_color_reply (c, xcb_alloc_color (c, cmap, 65535, 0, 0), NULL);
-
- if (!rep)
- return 0;
-
- /* Do something with r->pixel or the components */
-
- free (rep);
-
- return 0;
-}
-</pre>
- <p>
- As <span class="code">xcb_alloc_color_reply()</span> allocates
- memory, you have to free <span class="code">rep</span>.
- </p>
- <p>
- <b>TODO</b>: Talk about freeing colors.
- </p>
- </ol>
- <li class="title"><a name="pixmaps">X Bitmaps and Pixmaps</a>
- <p>
- One thing many so-called "Multi-Media" applications need to do,
- is display images. In the X world, this is done using bitmaps
- and pixmaps. We have already seen some usage of them when
- setting an icon for our application. Lets study them further,
- and see how to draw these images inside a window, along side the
- simple graphics and text we have seen so far.
- </p>
- <p>
- One thing to note before delving further, is that XCB (nor Xlib)
- supplies no means of manipulating popular image formats, such as
- gif, png, jpeg or tiff. It is up to the programmer (or to higher
- level graphics libraries) to translate these image formats into
- formats that the X server is familiar with (x bitmaps and x
- pixmaps).
- </p>
- <ol>
- <li class="subtitle"><a name="pixmapswhat">What is a X Bitmap? An X Pixmap?</a>
- <p>
- An X bitmap is a two-color image stored in a format specific
- to the X window system. When stored in a file, the bitmap data
- looks like a C source file. It contains variables defining the
- width and the height of the bitmap, an array containing the
- bit values of the bitmap (the size of the array is
- (width+7)/8*height and the bit and byte order are LSB), and
- an optional hot-spot location (that will
- be explained later, when discussing mouse cursors).
- </p>
- <p>
- An X pixmap is a format used to stored images in the memory of
- an X server. This format can store both black and white images
- (such as x bitmaps) as well as color images. It is the only
- image format supported by the X protocol, and any image to be
- drawn on screen, should be first translated into this format.
- </p>
- <p>
- In actuality, an X pixmap can be thought of as a window that
- does not appear on the screen. Many graphics operations that
- work on windows, will also work on pixmaps. Indeed, the type
- of X pixmap in XCB is an Id like a window:
- </p>
- <pre class="code">
-typedef uint32_t xcb_pixmap_t;
-</pre>
- <p>
- Like Xlib, there is no difference between a Drawable, a Window
- or a Pixmap:
- </p>
- <pre class="code">
-typedef uint32_t xcb_drawable_t;
-</pre>
- <p>
- in order to avoid confusion between a window and a pixmap. The
- operations that will work the same on a window or a pixmap
- will require a <span class="code">xcb_drawable_t</span>
- </p>
- <div class="emph">
- <p>
- Remark: In Xlib, there is no specific difference between a
- <span class="code">Drawable</span>, a
- <span class="code">Pixmap</span> or a
- <span class="code">Window</span>: all are 32 bit long
- integer. XCB wraps all these different IDs in structures to
- provide some measure of type-safety.
- </p>
- </div>
- <li class="subtitle"><a name="pixmapscreate">Creating a pixmap</a>
- <p>
- Sometimes we want to create an un-initialized pixmap, so we
- can later draw into it. This is useful for image drawing
- programs (creating a new empty canvas will cause the creation
- of a new pixmap on which the drawing can be stored). It is
- also useful when reading various image formats: we load the
- image data into memory, create a pixmap on the server, and
- then draw the decoded image data onto that pixmap.
- </p>
- <p>
- To create a new pixmap, we first ask the X server to give an
- Id to our pixmap, with this function:
- </p>
- <pre class="code">
-xcb_pixmap_t xcb_generate_id (xcb_connection_t *c);
-</pre>
- <p>
- Then, XCB supplies the following function to create new pixmaps:
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_create_pixmap (xcb_connection_t *c, /* Pointer to the xcb_connection_t structure */
- uint8_t depth, /* Depth of the screen */
- xcb_pixmap_t pid, /* Id of the pixmap */
- xcb_drawable_t drawable,
- uint16_t width, /* Width of the window (in pixels) */
- uint16_t height); /* Height of the window (in pixels) */
-</pre>
- <p>
- <b>TODO</b>: Explain the drawable parameter, and give an
- example (like <a href="xpoints.c">xpoints.c</a>)
- </p>
- <li class="subtitle"><a name="pixmapsdraw"></a>Drawing a pixmap in a window
- <p>
- Once we got a handle to a pixmap, we can draw it on some
- window, using the following function:
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_copy_area (xcb_connection_t *c, /* Pointer to the xcb_connection_t structure */
- xcb_drawable_t src_drawable, /* The Drawable we want to paste */
- xcb_drawable_t dst_drawable, /* The Drawable on which we copy the previous Drawable */
- xcb_gcontext_t gc, /* A Graphic Context */
- int16_t src_x, /* Top left x coordinate of the region we want to copy */
- int16_t src_y, /* Top left y coordinate of the region we want to copy */
- int16_t dst_x, /* Top left x coordinate of the region where we want to copy */
- int16_t dst_y, /* Top left y coordinate of the region where we want to copy */
- uint16_t width, /* Width of the region we want to copy */
- uint16_t height); /* Height of the region we want to copy */
-</pre>
- <p>
- As you can see, we could copy the whole pixmap, as well as
- only a given rectangle of the pixmap. This is useful to
- optimize the drawing speed: we could copy only what we have
- modified in the pixmap.
- </p>
- <p>
- <b>One important note should be made</b>: it is possible to
- create pixmaps with different depths on the same screen. When
- we perform copy operations (a pixmap onto a window, etc), we
- should make sure that both source and target have the same
- depth. If they have a different depth, the operation would
- fail. The exception to this is if we copy a specific bit plane
- of the source pixmap using the
- <span class="code">xcb_copy_plane_t</span> function. In such an
- event, we can copy a specific plane to the target window (in
- actuality, setting a specific bit in the color of each pixel
- copied). This can be used to generate strange graphic effects
- in a window, but that is beyond the scope of this tutorial.
- </p>
- <li class="subtitle"><a name="pixmapsfree"></a>Freeing a pixmap
- <p>
- Finally, when we are done using a given pixmap, we should free
- it, in order to free resources of the X server. This is done
- using this function:
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_free_pixmap (xcb_connection_t *c, /* Pointer to the xcb_connection_t structure */
- xcb_pixmap_t pixmap); /* A given pixmap */
-</pre>
- <p>
- Of course, after having freed it, we must not try accessing
- the pixmap again.
- </p>
- <p>
- <b>TODO</b>: Give an example, or a link to xpoints.c
- </p>
- </ol>
- <li class="title"><a name="mousecursor">Messing with the mouse cursor</a>
- <p>
- It it possible to modify the shape of the mouse pointer (also
- called the X pointer) when in certain states, as we otfen see in
- programs. For example, a busy application would often display
- the sand clock over its main window, to give the user a visual
- hint that he should wait. Let's see how we can change the mouse
- cursor of our windows.
- </p>
- <ol>
- <li class="subtitle"><a name="mousecursorcreate">Creating and destroying a mouse cursor</a>
- <p>
- There are two methods for creating cursors. One of them is by
- using a set of predefined cursors, that are supplied by the X
- server, the other is by using a user-supplied bitmap.
- </p>
- <p>
- In the first method, we use a special font named "cursor", and
- the function <span class="code">xcb_create_glyph_cursor</span>:
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_create_glyph_cursor (xcb_connection_t *c,
- xcb_cursor_t cid,
- xcb_font_t source_font, /* font for the source glyph */
- xcb_font_t mask_font, /* font for the mask glyph or XCB_NONE */
- uint16_t source_char, /* character glyph for the source */
- uint16_t mask_char, /* character glyph for the mask */
- uint16_t fore_red, /* red value for the foreground of the source */
- uint16_t fore_green, /* green value for the foreground of the source */
- uint16_t fore_blue, /* blue value for the foreground of the source */
- uint16_t back_red, /* red value for the background of the source */
- uint16_t back_green, /* green value for the background of the source */
- uint16_t back_blue) /* blue value for the background of the source */
-</pre>
- <p>
- <b>TODO</b>: Describe <span class="code">source_char</span>
- and <span class="code">mask_char</span>, for example by giving
- an example on how to get the values. There is a list there:
- <a href="http://tronche.com/gui/x/xlib/appendix/b/">X Font Cursors</a>
- </p>
- <p>
- So we first open that font (see <a href="#loadfont">Loading a Font</a>)
- and create the new cursor. As for every X ressource, we have to
- ask for an X id with <span class="code">xcb_generate_id</span>
- first:
- </p>
- <pre class="code">
-xcb_font_t font;
-xcb_cursor_t cursor;
-
-/* The connection is set */
-
-font = xcb_generate_id (conn);
-xcb_open_font (conn, font, strlen ("cursor"), "cursor");
-
-cursor = xcb_generate_id (conn);
-xcb_create_glyph_cursor (conn, cursor, font, font,
- 58, 58 + 1,
- 0, 0, 0,
- 0, 0, 0);
-</pre>
- <p>
- We have created the cursor "right hand" by specifying 58 to
- the <span class="code">source_fon</span>t argument and 58 + 1
- to the <span class="code">mask_font</span>.
- </p>
- <p>
- The cursor is destroyed by using the function
- </p>
- <pre class="code">
-xcb_void_cookie_t xcb_free_cursor (xcb_connection_t *c,
- xcb_cursor_t cursor);
-</pre>
- <p>
- In the second method, we create a new cursor by using a pair
- of pixmaps, with depth of one (that is, two colors
- pixmaps). One pixmap defines the shape of the cursor, while
- the other works as a mask, specifying which pixels of the
- cursor will be actually drawn. The rest of the pixels will be
- transparent.
- </p>
- <p>
- <b>TODO</b>: give an example.
- </p>
- <li class="subtitle"><a name="mousecursorset">Setting a window's mouse cursor</a>
- <p>
- Once the cursor is created, we can modify the cursor of our
- window by using <span class="code">xcb_change_window_attributes</span>
- and using the <span class="code">XCB_CWCURSOR</span> attribute:
- </p>
- <pre class="code">
-uint32_t mask;
-uint32_t value_list;
-
-/* The connection and window are set */
-/* The cursor is already created */
-
-mask = XCB_CWCURSOR;
-value_list = cursor;
-xcb_change_window_attributes (conn, window, mask, &value_list);
-</pre>
- <p>
- Of course, the cursor and the font must be freed.
- </p>
- <li class="subtitle"><a name="mousecursorexample">Complete example</a>
- <p>
- The following example displays a window with a
- button. When entering the window, the window cursor is changed
- to an arrow. When clicking once on the button, the cursor is
- changed to a hand. When clicking again on the button, the
- cursor window gets back to the arrow. The Esc key exits the
- application.
- </p>
- <pre class="code">
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include <xcb/xcb.h>
-
-#define WIDTH 300
-#define HEIGHT 150
-
-
-
-static xcb_gc_t gc_font_get (xcb_connection_t *c,
- xcb_screen_t *screen,
- xcb_window_t window,
- const char *font_name);
-
-static void button_draw (xcb_connection_t *c,
- xcb_screen_t *screen,
- xcb_window_t window,
- int16_t x1,
- int16_t y1,
- const char *label);
-
-static void text_draw (xcb_connection_t *c,
- xcb_screen_t *screen,
- xcb_window_t window,
- int16_t x1,
- int16_t y1,
- const char *label);
-
-static void cursor_set (xcb_connection_t *c,
- xcb_screen_t *screen,
- xcb_window_t window,
- int cursor_id);
-
-
-static void
-button_draw (xcb_connection_t *c,
- xcb_screen_t *screen,
- xcb_window_t window,
- int16_t x1,
- int16_t y1,
- const char *label)
-{
- xcb_point_t points[5];
- xcb_void_cookie_t cookie_gc;
- xcb_void_cookie_t cookie_line;
- xcb_void_cookie_t cookie_text;
- xcb_generic_error_t *error;
- xcb_gcontext_t gc;
- int16_t width;
- int16_t height;
- uint8_t length;
- int16_t inset;
-
- length = strlen (label);
- inset = 2;
-
- gc = gc_font_get(c, screen, window, "7x13");
-
- width = 7 * length + 2 * (inset + 1);
- height = 13 + 2 * (inset + 1);
- points[0].x = x1;
- points[0].y = y1;
- points[1].x = x1 + width;
- points[1].y = y1;
- points[2].x = x1 + width;
- points[2].y = y1 - height;
- points[3].x = x1;
- points[3].y = y1 - height;
- points[4].x = x1;
- points[4].y = y1;
- cookie_line = xcb_poly_line_checked (c, XCB_COORD_MODE_ORIGIN,
- window, gc, 5, points);
-
- error = xcb_request_check (c, cookie_line);
- if (error) {
- fprintf (stderr, "ERROR: can't draw lines : %d\n", error->error_code);
- xcb_disconnect (c);
- exit (-1);
- }
-
- cookie_text = xcb_image_text_8_checked (c, length, window, gc,
- x1 + inset + 1,
- y1 - inset - 1, label);
- error = xcb_request_check (c, cookie_text);
- if (error) {
- fprintf (stderr, "ERROR: can't paste text : %d\n", error->error_code);
- xcb_disconnect (c);
- exit (-1);
- }
-
- cookie_gc = xcb_free_gc (c, gc);
- error = xcb_request_check (c, cookie_gc);
- if (error) {
- fprintf (stderr, "ERROR: can't free gc : %d\n", error->error_code);
- xcb_disconnect (c);
- exit (-1);
- }
-}
-
-static void
-text_draw (xcb_connection_t *c,
- xcb_screen_t *screen,
- xcb_window_t window,
- int16_t x1,
- int16_t y1,
- const char *label)
-{
- xcb_void_cookie_t cookie_gc;
- xcb_void_cookie_t cookie_text;
- xcb_generic_error_t *error;
- xcb_gcontext_t gc;
- uint8_t length;
-
- length = strlen (label);
-
- gc = gc_font_get(c, screen, window, "7x13");
-
- cookie_text = xcb_image_text_8_checked (c, length, window, gc,
- x1,
- y1, label);
- error = xcb_request_check (c, cookie_text);
- if (error) {
- fprintf (stderr, "ERROR: can't paste text : %d\n", error->error_code);
- xcb_disconnect (c);
- exit (-1);
- }
-
- cookie_gc = xcb_free_gc (c, gc);
- error = xcb_request_check (c, cookie_gc);
- if (error) {
- fprintf (stderr, "ERROR: can't free gc : %d\n", error->error_code);
- xcb_disconnect (c);
- exit (-1);
- }
-}
-
-static xcb_gc_t
-gc_font_get (xcb_connection_t *c,
- xcb_screen_t *screen,
- xcb_window_t window,
- const char *font_name)
-{
- uint32_t value_list[3];
- xcb_void_cookie_t cookie_font;
- xcb_void_cookie_t cookie_gc;
- xcb_generic_error_t *error;
- xcb_font_t font;
- xcb_gcontext_t gc;
- uint32_t mask;
-
- font = xcb_generate_id (c);
- cookie_font = xcb_open_font_checked (c, font,
- strlen (font_name),
- font_name);
-
- error = xcb_request_check (c, cookie_font);
- if (error) {
- fprintf (stderr, "ERROR: can't open font : %d\n", error->error_code);
- xcb_disconnect (c);
- return -1;
- }
-
- gc = xcb_generate_id (c);
- mask = XCB_GC_FOREGROUND | XCB_GC_BACKGROUND | XCB_GC_FONT;
- value_list[0] = screen->black_pixel;
- value_list[1] = screen->white_pixel;
- value_list[2] = font;
- cookie_gc = xcb_create_gc_checked (c, gc, window, mask, value_list);
- error = xcb_request_check (c, cookie_gc);
- if (error) {
- fprintf (stderr, "ERROR: can't create gc : %d\n", error->error_code);
- xcb_disconnect (c);
- exit (-1);
- }
-
- cookie_font = xcb_close_font_checked (c, font);
- error = xcb_request_check (c, cookie_font);
- if (error) {
- fprintf (stderr, "ERROR: can't close font : %d\n", error->error_code);
- xcb_disconnect (c);
- exit (-1);
- }
-
- return gc;
-}
-
-static void
-cursor_set (xcb_connection_t *c,
- xcb_screen_t *screen,
- xcb_window_t window,
- int cursor_id)
-{
- uint32_t values_list[3];
- xcb_void_cookie_t cookie_font;
- xcb_void_cookie_t cookie_gc;
- xcb_generic_error_t *error;
- xcb_font_t font;
- xcb_cursor_t cursor;
- xcb_gcontext_t gc;
- uint32_t mask;
- uint32_t value_list;
-
- font = xcb_generate_id (c);
- cookie_font = xcb_open_font_checked (c, font,
- strlen ("cursor"),
- "cursor");
- error = xcb_request_check (c, cookie_font);
- if (error) {
- fprintf (stderr, "ERROR: can't open font : %d\n", error->error_code);
- xcb_disconnect (c);
- exit (-1);
- }
-
- cursor = xcb_generate_id (c);
- xcb_create_glyph_cursor (c, cursor, font, font,
- cursor_id, cursor_id + 1,
- 0, 0, 0,
- 0, 0, 0);
-
- gc = xcb_generate_id (c);
- mask = XCB_GC_FOREGROUND | XCB_GC_BACKGROUND | XCB_GC_FONT;
- values_list[0] = screen->black_pixel;
- values_list[1] = screen->white_pixel;
- values_list[2] = font;
- cookie_gc = xcb_create_gc_checked (c, gc, window, mask, values_list);
- error = xcb_request_check (c, cookie_gc);
- if (error) {
- fprintf (stderr, "ERROR: can't create gc : %d\n", error->error_code);
- xcb_disconnect (c);
- exit (-1);
- }
-
- mask = XCB_CW_CURSOR;
- value_list = cursor;
- xcb_change_window_attributes (c, window, mask, &value_list);
-
- xcb_free_cursor (c, cursor);
-
- cookie_font = xcb_close_font_checked (c, font);
- error = xcb_request_check (c, cookie_font);
- if (error) {
- fprintf (stderr, "ERROR: can't close font : %d\n", error->error_code);
- xcb_disconnect (c);
- exit (-1);
- }
-}
-
-int main ()
-{
- xcb_screen_iterator_t screen_iter;
- xcb_connection_t *c;
- const xcb_setup_t *setup;
- xcb_screen_t *screen;
- xcb_generic_event_t *e;
- xcb_generic_error_t *error;
- xcb_void_cookie_t cookie_window;
- xcb_void_cookie_t cookie_map;
- xcb_window_t window;
- uint32_t mask;
- uint32_t values[2];
- int screen_number;
- uint8_t is_hand = 0;
-
- /* getting the connection */
- c = xcb_connect (NULL, &screen_number);
- if (!c) {
- fprintf (stderr, "ERROR: can't connect to an X server\n");
- return -1;
- }
-
- /* getting the current screen */
- setup = xcb_get_setup (c);
-
- screen = NULL;
- screen_iter = xcb_setup_roots_iterator (setup);
- for (; screen_iter.rem != 0; --screen_number, xcb_screen_next (&screen_iter))
- if (screen_number == 0)
- {
- screen = screen_iter.data;
- break;
- }
- if (!screen) {
- fprintf (stderr, "ERROR: can't get the current screen\n");
- xcb_disconnect (c);
- return -1;
- }
-
- /* creating the window */
- window = xcb_generate_id (c);
- mask = XCB_CW_BACK_PIXEL | XCB_CW_EVENT_MASK;
- values[0] = screen->white_pixel;
- values[1] =
- XCB_EVENT_MASK_KEY_RELEASE |
- XCB_EVENT_MASK_BUTTON_PRESS |
- XCB_EVENT_MASK_EXPOSURE |
- XCB_EVENT_MASK_POINTER_MOTION;
- cookie_window = xcb_create_window_checked (c,
- screen->root_depth,
- window, screen->root,
- 20, 200, WIDTH, HEIGHT,
- 0, XCB_WINDOW_CLASS_INPUT_OUTPUT,
- screen->root_visual,
- mask, values);
- cookie_map = xcb_map_window_checked (c, window);
-
- /* error managing */
- error = xcb_request_check (c, cookie_window);
- if (error) {
- fprintf (stderr, "ERROR: can't create window : %d\n", error->error_code);
- xcb_disconnect (c);
- return -1;
- }
- error = xcb_request_check (c, cookie_map);
- if (error) {
- fprintf (stderr, "ERROR: can't map window : %d\n", error->error_code);
- xcb_disconnect (c);
- return -1;
- }
-
- cursor_set (c, screen, window, 68);
-
- xcb_flush(c);
-
- while (1) {
- e = xcb_poll_for_event(c);
- if (e) {
- switch (e->response_type & ~0x80) {
- case XCB_EXPOSE: {
- char *text;
-
- text = "click here to change cursor";
- button_draw (c, screen, window,
- (WIDTH - 7 * strlen(text)) / 2,
- (HEIGHT - 16) / 2, text);
-
- text = "Press ESC key to exit...";
- text_draw (c, screen, window, 10, HEIGHT - 10, text);
- break;
- }
- case XCB_BUTTON_PRESS: {
- xcb_button_press_event_t *ev;
- int length;
-
- ev = (xcb_button_press_event_t *)e;
- length = strlen ("click here to change cursor");
-
- if ((ev->event_x >= (WIDTH - 7 * length) / 2) &&
- (ev->event_x <= ((WIDTH - 7 * length) / 2 + 7 * length + 6)) &&
- (ev->event_y >= (HEIGHT - 16) / 2 - 19) &&
- (ev->event_y <= ((HEIGHT - 16) / 2)))
- is_hand = 1 - is_hand;
-
- is_hand ? cursor_set (c, screen, window, 58) : cursor_set (c, screen, window, 68);
- }
- case XCB_KEY_RELEASE: {
- xcb_key_release_event_t *ev;
-
- ev = (xcb_key_release_event_t *)e;
-
- switch (ev->detail) {
- /* ESC */
- case 9:
- free (e);
- xcb_disconnect (c);
- return 0;
- }
- }
- }
- free (e);
- }
- }
-
- return 0;
-}
-</pre>
- </ol>
- <li class="title"><a name="translation">Translation of basic Xlib functions and macros</a>
- <p>
- The problem when you want to port an Xlib program to XCB is that
- you don't know if the Xlib function that you want to "translate"
- is a X Window one or an Xlib macro. In that section, we describe
- a way to translate the usual functions or macros that Xlib
- provides. It's usually just a member of a structure.
- </p>
- <ol>
- <li class="subtitle"><a name="displaystructure">Members of the Display structure</a>
- <p>
- In this section, we look at how to translate the macros that
- return some members of the <span class="code">Display</span>
- structure. They are obtained by using a function that requires a
- <span class="code">xcb_connection_t *</span> or a member of the
- <span class="code">xcb_setup_t</span> structure
- (via the function <span class="code">xcb_get_setup</span>), or
- a function that requires that structure.
- </p>
- <ol>
- <li class="subtitle"><a name="ConnectionNumber">ConnectionNumber</a>
- <p>
- This number is the file descriptor that connects the client
- to the server. You just have to use that function:
- </p>
- <pre class="code">
-int xcb_get_file_descriptor (xcb_connection_t *c);
-</pre>
- <li class="subtitle"><a name="DefaultScreen"></a>DefaultScreen
- <p>
- That number is not stored by XCB. It is returned in the
- second parameter of the function <span class="code"><a href="#openconn">xcb_connect</a></span>.
- Hence, you have to store it yourself if you want to use
- it. Then, to get the <span class="code">xcb_screen_t</span>
- structure, you have to iterate on the screens.
- The equivalent function of the Xlib's
- <span class="code">ScreenOfDisplay</span> function can be
- found <a href="#ScreenOfDisplay">below</a>. This is also provided in the
- xcb_aux_t library as <span class="code">xcb_aux_get_screen()</span>. OK, here is the
- small piece of code to get that number:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-int screen_default_nbr;
-
-/* you pass the name of the display you want to xcb_connect_t */
-
-c = xcb_connect (display_name, &screen_default_nbr);
-
-/* screen_default_nbr contains now the number of the default screen */
-</pre>
- <li class="subtitle"><a name="QLength"></a>QLength
- <p>
- Not documented yet.
- </p>
- <p>
- However, this points out a basic difference in philosophy between
- Xlib and XCB. Xlib has several functions for filtering and
- manipulating the incoming and outgoing X message queues. XCB
- wishes to hide this as much as possible from the user, which
- allows for more freedom in implementation strategies.
- </p>
- <li class="subtitle"><a name="ScreenCount"></a>ScreenCount
- <p>
- You get the count of screens with the functions
- <span class="code">xcb_get_setup</span>
- and
- <span class="code">xcb_setup_roots_iterator</span>
- (if you need to iterate):
- </p>
- <pre class="code">
-xcb_connection_t *c;
-int screen_count;
-
-/* you init the connection */
-
-screen_count = xcb_setup_roots_iterator (xcb_get_setup (c)).rem;
-
-/* screen_count contains now the count of screens */
-</pre>
- <p>
- If you don't want to iterate over the screens, a better way
- to get that number is to use
- <span class="code">xcb_setup_roots_length_t</span>:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-int screen_count;
-
-/* you init the connection */
-
-screen_count = xcb_setup_roots_length (xcb_get_setup (c));
-
-/* screen_count contains now the count of screens */
-</pre>
- <li class="subtitle"><a name="ServerVendor"></a>ServerVendor
- <p>
- You get the name of the vendor of the server hardware with
- the functions <span class="code">xcb_get_setup</span>
- and
- <span
- class="code">xcb_setup_vendor</span>. Beware
- that, unlike Xlib, the string returned by XCB is not
- necessarily null-terminaled:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-char *vendor = NULL;
-int length;
-
-/* you init the connection */
-length = xcb_setup_vendor_length (xcb_get_setup (c));
-vendor = (char *)malloc (length + 1);
-if (vendor)
-memcpy (vendor, xcb_setup_vendor (xcb_get_setup (c)), length);
-vendor[length] = '\0';
-
-/* vendor contains now the name of the vendor. Must be freed when not used anymore */
-</pre>
- <li class="subtitle"><a name="ProtocolVersion"></a>ProtocolVersion
- <p>
- You get the major version of the protocol in the
- <span class="code">xcb_setup_t</span>
- structure, with the function <span class="code">xcb_get_setup</span>:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-uint16_t protocol_major_version;
-
-/* you init the connection */
-
-protocol_major_version = xcb_get_setup (c)->protocol_major_version;
-
-/* protocol_major_version contains now the major version of the protocol */
-</pre>
- <li class="subtitle"><a name="ProtocolRevision"></a>ProtocolRevision
- <p>
- You get the minor version of the protocol in the
- <span class="code">xcb_setup_t</span>
- structure, with the function <span class="code">xcb_get_setup</span>:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-uint16_t protocol_minor_version;
-
-/* you init the connection */
-
-protocol_minor_version = xcb_get_setup (c)->protocol_minor_version;
-
-/* protocol_minor_version contains now the minor version of the protocol */
-</pre>
- <li class="subtitle"><a name="VendorRelease"></a>VendorRelease
- <p>
- You get the number of the release of the server hardware in the
- <span class="code">xcb_setup_t</span>
- structure, with the function <span class="code">xcb_get_setup</span>:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-uint32_t release_number;
-
-/* you init the connection */
-
-release_number = xcb_get_setup (c)->release_number;
-
-/* release_number contains now the number of the release of the server hardware */
-</pre>
- <li class="subtitle"><a name="DisplayString"></a>DisplayString
- <p>
- The name of the display is not stored in XCB. You have to
- store it by yourself.
- </p>
- <li class="subtitle"><a name="BitmapUnit"></a>BitmapUnit
- <p>
- You get the bitmap scanline unit in the
- <span class="code">xcb_setup_t</span>
- structure, with the function <span class="code">xcb_get_setup</span>:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-uint8_t bitmap_format_scanline_unit;
-
-/* you init the connection */
-
-bitmap_format_scanline_unit = xcb_get_setup (c)->bitmap_format_scanline_unit;
-
-/* bitmap_format_scanline_unit contains now the bitmap scanline unit */
-</pre>
- <li class="subtitle"><a name="BitmapBitOrder"></a>BitmapBitOrder
- <p>
- You get the bitmap bit order in the
- <span class="code">xcb_setup_t</span>
- structure, with the function <span class="code">xcb_get_setup</span>:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-uint8_t bitmap_format_bit_order;
-
-/* you init the connection */
-
-bitmap_format_bit_order = xcb_get_setup (c)->bitmap_format_bit_order;
-
-/* bitmap_format_bit_order contains now the bitmap bit order */
-</pre>
- <li class="subtitle"><a name="BitmapPad"></a>BitmapPad
- <p>
- You get the bitmap scanline pad in the
- <span class="code">xcb_setup_t</span>
- structure, with the function <span class="code">xcb_get_setup</span>:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-uint8_t bitmap_format_scanline_pad;
-
-/* you init the connection */
-
-bitmap_format_scanline_pad = xcb_get_setup (c)->bitmap_format_scanline_pad;
-
-/* bitmap_format_scanline_pad contains now the bitmap scanline pad */
-</pre>
- <li class="subtitle"><a name="ImageByteOrder"></a>ImageByteOrder
- <p>
- You get the image byte order in the
- <span class="code">xcb_setup_t</span>
- structure, with the function <span class="code">xcb_get_setup</span>:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-uint8_t image_byte_order;
-
-/* you init the connection */
-
-image_byte_order = xcb_get_setup (c)->image_byte_order;
-
-/* image_byte_order contains now the image byte order */
-</pre>
- </ol>
- <li class="subtitle"><a name="screenofdisplay">ScreenOfDisplay related functions</a>
- <p>
- in Xlib, <span class="code">ScreenOfDisplay</span> returns a
- <span class="code">Screen</span> structure that contains
- several characteristics of your screen. XCB has a similar
- structure (<span class="code">xcb_screen_t</span>),
- but the way to obtain it is a bit different. With
- Xlib, you just provide the number of the screen and you grab it
- from an array. With XCB, you iterate over all the screens to
- obtain the one you want. The complexity of this operation is
- O(n). So the best is to store this structure if you use
- it often. See <a href="#ScreenOfDisplay">screen_of_display</a> just below.
- </p>
- <p>
- Xlib provides generally two functions to obtain the characteristics
- related to the screen. One with the display and the number of
- the screen, which calls <span class="code">ScreenOfDisplay</span>,
- and the other that uses the <span class="code">Screen</span> structure.
- This might be a bit confusing. As mentioned above, with XCB, it
- is better to store the <span class="code">xcb_screen_t</span>
- structure. Then, you have to read the members of this
- structure. That's why the Xlib functions are put by pairs (or
- more) as, with XCB, you will use the same code.
- </p>
- <ol>
- <li class="subtitle"><a name="ScreenOfDisplay">ScreenOfDisplay</a>
- <p>
- This function returns the Xlib <span class="code">Screen</span>
- structure. With XCB, you iterate over all the screens and
- once you get the one you want, you return it:
- </p>
- <pre class="code"><a name="ScreenOfDisplay"></a>
-xcb_screen_t *screen_of_display (xcb_connection_t *c,
- int screen)
-{
- xcb_screen_iterator_t iter;
-
- iter = xcb_setup_roots_iterator (xcb_get_setup (c));
- for (; iter.rem; --screen, xcb_screen_next (&iter))
- if (screen == 0)
- return iter.data;
-
- return NULL;
-}
-</pre>
- <p>
- As mentioned above, you might want to store the value
- returned by this function.
- </p>
- <p>
- All the functions below will use the result of that
- function, as they just grab a specific member of the
- <span class="code">xcb_screen_t</span> structure.
- </p>
- <li class="subtitle"><a name="DefaultScreenOfDisplay"></a>DefaultScreenOfDisplay
- <p>
- It is the default screen that you obtain when you connect to
- the X server. It suffices to call the <a href="#ScreenOfDisplay">screen_of_display</a>
- function above with the connection and the number of the
- default screen.
- </p>
- <pre class="code">
-xcb_connection_t *c;
-int screen_default_nbr;
-xcb_screen_t *default_screen; /* the returned default screen */
-
-/* you pass the name of the display you want to xcb_connect_t */
-
-c = xcb_connect (display_name, &screen_default_nbr);
-default_screen = screen_of_display (c, screen_default_nbr);
-
-/* default_screen contains now the default root window, or a NULL window if no screen is found */
-</pre>
- <li class="subtitle"><a name="RootWindow">RootWindow / RootWindowOfScreen</a>
- <br>
- <pre class="code">
-xcb_connection_t *c;
-xcb_screen_t *screen;
-int screen_nbr;
-xcb_window_t root_window = { 0 }; /* the returned window */
-
-/* you init the connection and screen_nbr */
-
-screen = screen_of_display (c, screen_nbr);
-if (screen)
- root_window = screen->root;
-
-/* root_window contains now the root window, or a NULL window if no screen is found */
-</pre>
- <li class="subtitle"><a name="DefaultRootWindow">DefaultRootWindow</a>
- <p>
- It is the root window of the default screen. So, you call
- <a name="ScreenOfDisplay">ScreenOfDisplay</a> with the
- default screen number and you get the
- <a href="#RootWindow">root window</a> as above:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-xcb_screen_t *screen;
-int screen_default_nbr;
-xcb_window_t root_window = { 0 }; /* the returned root window */
-
-/* you pass the name of the display you want to xcb_connect_t */
-
-c = xcb_connect (display_name, &screen_default_nbr);
-screen = screen_of_display (c, screen_default_nbr);
-if (screen)
- root_window = screen->root;
-
-/* root_window contains now the default root window, or a NULL window if no screen is found */
-</pre>
- <li class="subtitle"><a name="DefaultVisual">DefaultVisual / DefaultVisualOfScreen</a>
- <p>
- While a Visual is, in Xlib, a structure, in XCB, there are
- two types: <span class="code">xcb_visualid_t</span>, which is
- the Id of the visual, and <span class="code">xcb_visualtype_t</span>,
- which corresponds to the Xlib Visual. To get the Id of the
- visual of a screen, just get the
- <span class="code">root_visual</span>
- member of a <span class="code">xcb_screen_t</span>:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-xcb_screen_t *screen;
-int screen_nbr;
-xcb_visualid_t root_visual = { 0 }; /* the returned visual Id */
-
-/* you init the connection and screen_nbr */
-
-screen = screen_of_display (c, screen_nbr);
-if (screen)
- root_visual = screen->root_visual;
-
-/* root_visual contains now the value of the Id of the visual, or a NULL visual if no screen is found */
-</pre>
- <p>
- To get the <span class="code">xcb_visualtype_t</span>
- structure, it's a bit less easy. You have to get the
- <span class="code">xcb_screen_t</span> structure that you want,
- get its <span class="code">root_visual</span> member,
- then iterate over the <span class="code">xcb_depth_t</span>s
- and the <span class="code">xcb_visualtype_t</span>s, and compare
- the <span class="code">xcb_visualid_t</span> of these <span class="code">xcb_visualtype_t</span>s:
- with <span class="code">root_visual</span>:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-xcb_screen_t *screen;
-int screen_nbr;
-xcb_visualid_t root_visual = { 0 };
-xcb_visualtype_t *visual_type = NULL; /* the returned visual type */
-
-/* you init the connection and screen_nbr */
-
-screen = screen_of_display (c, screen_nbr);
-if (screen) {
- xcb_depth_iterator_t depth_iter;
-
- depth_iter = xcb_screen_allowed_depths_iterator (screen);
- for (; depth_iter.rem; xcb_depth_next (&depth_iter)) {
- xcb_visualtype_iterator_t visual_iter;
-
- visual_iter = xcb_depth_visuals_iterator (depth_iter.data);
- for (; visual_iter.rem; xcb_visualtype_next (&visual_iter)) {
- if (screen->root_visual == visual_iter.data->visual_id) {
- visual_type = visual_iter.data;
- break;
- }
- }
- }
-}
-
-/* visual_type contains now the visual structure, or a NULL visual structure if no screen is found */
-</pre>
- <li class="subtitle"><a name="DefaultGC">DefaultGC / DefaultGCOfScreen</a>
- <p>
- This default Graphic Context is just a newly created Graphic
- Context, associated to the root window of a
- <span class="code">xcb_screen_t</span>,
- using the black white pixels of that screen:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-xcb_screen_t *screen;
-int screen_nbr;
-xcb_gcontext_t gc = { 0 }; /* the returned default graphic context */
-
-/* you init the connection and screen_nbr */
-
-screen = screen_of_display (c, screen_nbr);
-if (screen) {
- xcb_drawable_t draw;
- uint32_t mask;
- uint32_t values[2];
-
- gc = xcb_generate_id (c);
- draw = screen->root;
- mask = XCB_GC_FOREGROUND | XCB_GC_BACKGROUND;
- values[0] = screen->black_pixel;
- values[1] = screen->white_pixel;
- xcb_create_gc (c, gc, draw, mask, values);
-}
-
-/* gc contains now the default graphic context */
-</pre>
- <li class="subtitle"><a name="BlackPixel">BlackPixel / BlackPixelOfScreen</a>
- <p>
- It is the Id of the black pixel, which is in the structure
- of an <span class="code">xcb_screen_t</span>.
- </p>
- <pre class="code">
-xcb_connection_t *c;
-xcb_screen_t *screen;
-int screen_nbr;
-uint32_t black_pixel = 0; /* the returned black pixel */
-
-/* you init the connection and screen_nbr */
-
-screen = screen_of_display (c, screen_nbr);
-if (screen)
- black_pixel = screen->black_pixel;
-
-/* black_pixel contains now the value of the black pixel, or 0 if no screen is found */
-</pre>
- <li class="subtitle"><a name="WhitePixel">WhitePixel / WhitePixelOfScreen</a>
- <p>
- It is the Id of the white pixel, which is in the structure
- of an <span class="code">xcb_screen_t</span>.
- </p>
- <pre class="code">
-xcb_connection_t *c;
-xcb_screen_t *screen;
-int screen_nbr;
-uint32_t white_pixel = 0; /* the returned white pixel */
-
-/* you init the connection and screen_nbr */
-
-screen = screen_of_display (c, screen_nbr);
-if (screen)
- white_pixel = screen->white_pixel;
-
-/* white_pixel contains now the value of the white pixel, or 0 if no screen is found */
-</pre>
- <li class="subtitle"><a name="DisplayWidth">DisplayWidth / WidthOfScreen</a>
- <p>
- It is the width in pixels of the screen that you want, and
- which is in the structure of the corresponding
- <span class="code">xcb_screen_t</span>.
- </p>
- <pre class="code">
-xcb_connection_t *c;
-xcb_screen_t *screen;
-int screen_nbr;
-uint32_t width_in_pixels = 0; /* the returned width in pixels */
-
-/* you init the connection and screen_nbr */
-
-screen = screen_of_display (c, screen_nbr);
-if (screen)
- width_in_pixels = screen->width_in_pixels;
-
-/* width_in_pixels contains now the width in pixels, or 0 if no screen is found */
-</pre>
- <li class="subtitle"><a name="DisplayHeight">DisplayHeight / HeightOfScreen</a>
- <p>
- It is the height in pixels of the screen that you want, and
- which is in the structure of the corresponding
- <span class="code">xcb_screen_t</span>.
- </p>
- <pre class="code">
-xcb_connection_t *c;
-xcb_screen_t *screen;
-int screen_nbr;
-uint32_t height_in_pixels = 0; /* the returned height in pixels */
-
-/* you init the connection and screen_nbr */
-
-screen = screen_of_display (c, screen_nbr);
-if (screen)
- height_in_pixels = screen->height_in_pixels;
-
-/* height_in_pixels contains now the height in pixels, or 0 if no screen is found */
-</pre>
- <li class="subtitle"><a name="DisplayWidthMM">DisplayWidthMM / WidthMMOfScreen</a>
- <p>
- It is the width in millimeters of the screen that you want, and
- which is in the structure of the corresponding
- <span class="code">xcb_screen_t</span>.
- </p>
- <pre class="code">
-xcb_connection_t *c;
-xcb_screen_t *screen;
-int screen_nbr;
-uint32_t width_in_millimeters = 0; /* the returned width in millimeters */
-
-/* you init the connection and screen_nbr */
-
-screen = screen_of_display (c, screen_nbr);
-if (screen)
- width_in_millimeters = screen->width_in_millimeters;
-
-/* width_in_millimeters contains now the width in millimeters, or 0 if no screen is found */
-</pre>
- <li class="subtitle"><a name="DisplayHeightMM">DisplayHeightMM / HeightMMOfScreen</a>
- <p>
- It is the height in millimeters of the screen that you want, and
- which is in the structure of the corresponding
- <span class="code">xcb_screen_t</span>.
- </p>
- <pre class="code">
-xcb_connection_t *c;
-xcb_screen_t *screen;
-int screen_nbr;
-uint32_t height_in_millimeters = 0; /* the returned height in millimeters */
-
-/* you init the connection and screen_nbr */
-
-screen = screen_of_display (c, screen_nbr);
-if (screen)
- height_in_millimeters = screen->height_in_millimeters;
-
-/* height_in_millimeters contains now the height in millimeters, or 0 if no screen is found */
-</pre>
- <li class="subtitle"><a name="DisplayPlanes">DisplayPlanes / DefaultDepth / DefaultDepthOfScreen / PlanesOfScreen</a>
- <p>
- It is the depth (in bits) of the root window of the
- screen. You get it from the <span class="code">xcb_screen_t</span> structure.
- </p>
- <pre class="code">
-xcb_connection_t *c;
-xcb_screen_t *screen;
-int screen_nbr;
-uint8_t root_depth = 0; /* the returned depth of the root window */
-
-/* you init the connection and screen_nbr */
-
-screen = screen_of_display (c, screen_nbr);
-if (screen)
- root_depth = screen->root_depth;
-
-/* root_depth contains now the depth of the root window, or 0 if no screen is found */
-</pre>
- <li class="subtitle"><a name="DefaultColormap">DefaultColormap / DefaultColormapOfScreen</a>
- <p>
- This is the default colormap of the screen (and not the
- (default) colormap of the default screen !). As usual, you
- get it from the <span class="code">xcb_screen_t</span> structure:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-xcb_screen_t *screen;
-int screen_nbr;
-xcb_colormap_t default_colormap = { 0 }; /* the returned default colormap */
-
-/* you init the connection and screen_nbr */
-
-screen = screen_of_display (c, screen_nbr);
-if (screen)
- default_colormap = screen->default_colormap;
-
-/* default_colormap contains now the default colormap, or a NULL colormap if no screen is found */
-</pre>
- <li class="subtitle"><a name="MinCmapsOfScreen"></a>MinCmapsOfScreen
- <p>
- You get the minimum installed colormaps in the <span class="code">xcb_screen_t</span> structure:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-xcb_screen_t *screen;
-int screen_nbr;
-uint16_t min_installed_maps = 0; /* the returned minimum installed colormaps */
-
-/* you init the connection and screen_nbr */
-
-screen = screen_of_display (c, screen_nbr);
-if (screen)
- min_installed_maps = screen->min_installed_maps;
-
-/* min_installed_maps contains now the minimum installed colormaps, or 0 if no screen is found */
-</pre>
- <li class="subtitle"><a name="MaxCmapsOfScreen"></a>MaxCmapsOfScreen
- <p>
- You get the maximum installed colormaps in the <span class="code">xcb_screen_t</span> structure:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-xcb_screen_t *screen;
-int screen_nbr;
-uint16_t max_installed_maps = 0; /* the returned maximum installed colormaps */
-
-/* you init the connection and screen_nbr */
-
-screen = screen_of_display (c, screen_nbr);
-if (screen)
- max_installed_maps = screen->max_installed_maps;
-
-/* max_installed_maps contains now the maximum installed colormaps, or 0 if no screen is found */
-</pre>
- <li class="subtitle"><a name="DoesSaveUnders"></a>DoesSaveUnders
- <p>
- You know if <span class="code">save_unders</span> is set,
- by looking in the <span class="code">xcb_screen_t</span> structure:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-xcb_screen_t *screen;
-int screen_nbr;
-uint8_t save_unders = 0; /* the returned value of save_unders */
-
-/* you init the connection and screen_nbr */
-
-screen = screen_of_display (c, screen_nbr);
-if (screen)
- save_unders = screen->save_unders;
-
-/* save_unders contains now the value of save_unders, or FALSE if no screen is found */
-</pre>
- <li class="subtitle"><a name="DoesBackingStore"></a>DoesBackingStore
- <p>
- You know the value of <span class="code">backing_stores</span>,
- by looking in the <span class="code">xcb_screen_t</span> structure:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-xcb_screen_t *screen;
-int screen_nbr;
-uint8_t backing_stores = 0; /* the returned value of backing_stores */
-
-/* you init the connection and screen_nbr */
-
-screen = screen_of_display (c, screen_nbr);
-if (screen)
- backing_stores = screen->backing_stores;
-
-/* backing_stores contains now the value of backing_stores, or FALSE if no screen is found */
-</pre>
- <li class="subtitle"><a name="EventMaskOfScreen"></a>EventMaskOfScreen
- <p>
- To get the current input masks,
- you look in the <span class="code">xcb_screen_t</span> structure:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-xcb_screen_t *screen;
-int screen_nbr;
-uint32_t current_input_masks = 0; /* the returned value of current input masks */
-
-/* you init the connection and screen_nbr */
-
-screen = screen_of_display (c, screen_nbr);
-if (screen)
- current_input_masks = screen->current_input_masks;
-
-/* current_input_masks contains now the value of the current input masks, or FALSE if no screen is found */
-</pre>
- </ol>
- <li class="subtitle"><a name="misc">Miscellaneous macros</a>
- <ol>
- <li class="subtitle"><a name="DisplayOfScreen"></a>DisplayOfScreen
- <p>
- in Xlib, the <span class="code">Screen</span> structure
- stores its associated <span class="code">Display</span>
- structure. This is not the case in the X Window protocol,
- hence, it's also not the case in XCB. So you have to store
- it by yourself.
- </p>
- <li class="subtitle"><a name="DisplayCells"></a>DisplayCells / CellsOfScreen
- <p>
- To get the colormap entries,
- you look in the <span class="code">xcb_visualtype_t</span>
- structure, that you grab like <a class="subsection" href="#DefaultVisual">here</a>:
- </p>
- <pre class="code">
-xcb_connection_t *c;
-xcb_visualtype_t *visual_type;
-uint16_t colormap_entries = 0; /* the returned value of the colormap entries */
-
-/* you init the connection and visual_type */
-
-if (visual_type)
- colormap_entries = visual_type->colormap_entries;
-
-/* colormap_entries contains now the value of the colormap entries, or FALSE if no screen is found */
-</pre>
- </ol>
- </ol>
- </ol>
- </div>
-</body>
-
-</html>
+<!DOCTYPE html public "-//W3C//DTD HTML 4.01 Transitional//EN" +"http://www.w3.org/TR/html4/loose.dtd"> + +<html> + +<head> + <title>Basic Graphics Programming With The XCB Library</title> + <meta http-equiv="content-type" content="text/html; charset=iso-8859-1"> + <link href="xcb.css" rel="stylesheet" type="text/css"> +</head> + +<body> + <div class="title"> + Basic Graphics Programming With The XCB Library + </div> + <div class="toc"> + <ol> + <li><a class="section" href="#intro">Introduction</a> + <li><a class="section" href="#Xmodel">The client and server model of the X window system</a> + <li><a class="section" href="#asynch">GUI programming: the asynchronous model</a> + <li><a class="section" href="#notions">Basic XCB notions</a> + <ol> + <li><a class="subsection" href="#conn">The X Connection</a> + <li><a class="subsection" href="#requestsreplies">Requests and replies: the Xlib killers</a> + <li><a class="subsection" href="#gc">The Graphics Context</a> + <li>Object handles + <li>Memory allocation for XCB structures + <li><a class="subsection" href="#events">Events</a> + </ol> + <li><a class="section" href="#use">Using XCB-based programs</a> + <ol> + <li><a class="subsection" href="#inst">Installation of XCB</a> + <li><a class="subsection" href="#comp">Compiling XCB-based programs</a> + </ol> + <li><a class="section" href="#openconn">Opening and closing the connection to an X server</a> + <li><a class="section" href="#screen">Checking basic information about a connection</a> + <li><a class="section" href="#helloworld">Creating a basic window - the "hello world" program</a> + <li><a class="section" href="#drawing">Drawing in a window</a> + <ol> + <li><a class="subsection" href="#allocgc">Allocating a Graphics Context</a> + <li><a class="subsection" href="#changegc">Changing the attributes of a Graphics Context</a> + <li><a class="subsection" href="#drawingprim">Drawing primitives: point, line, box, circle,...</a> + </ol> + <li><a class="section" href="#xevents">X Events</a> + <ol> + <li><a class="subsection" href="#register">Registering for event types using event masks</a> + <li><a class="subsection" href="#loop">Receiving events: writing the events loop</a> + <li><a class="subsection" href="#expose">Expose events</a> + <li><a class="subsection" href="#userinput">Getting user input</a> + <ol> + <li><a class="subsubsection" href="#mousepressrelease">Mouse button press and release events</a> + <li><a class="subsubsection" href="#mousemvnt">Mouse movement events</a> + <li><a class="subsubsection" href="#mouseenter">Mouse pointer enter and leave events</a> + <li><a class="subsubsection" href="#focus">The keyboard focus</a> + <li><a class="subsubsection" href="#keypress">Keyboard press and release events</a> + </ol> + <li><a class="subsection" href="#eventex">X events: a complete example</a> + </ol> + <li><a class="section" href="#font">Handling text and fonts</a> + <ol> + <li><a class="subsection" href="#fontstruct">The Font structure</a> + <li><a class="subsection" href="#openingfont">Opening a Font</a> + <li><a class="subsection" href="#assigningfont">Assigning a Font to a Graphic Context</a> + <li><a class="subsection" href="#drawingtext">Drawing text in a drawable</a> + <li><a class="subsection" href="#fontcompleteexample">Complete example</a> + </ol> + <li>Windows hierarchy + <ol> + <li>Root, parent and child windows + <li>Events propagation + </ol> + <li><a class="section" href="#wm">Interacting with the window manager</a> + <ol> + <li><a class="subsection" href="#wmprop">Window properties</a> + <li><a class="subsection" href="#wmname">Setting the window name and icon name</a> + <li>Setting preferred window size(s) + <li>Setting miscellaneous window manager hints + <li>Setting an application's icon + <li>Obeying the delete-window protocol + </ol> + <li><a class="section" href="#winop">Simple window operations</a> + <ol> + <li><a class="subsection" href="#winmap">Mapping and unmapping a window</a> + <li><a class="subsection" href="#winconf">Configuring a window</a> + <li><a class="subsection" href="#winmove">Moving a window around the screen</a> + <li><a class="subsection" href="#winsize">Resizing a window</a> + <li><a class="subsection" href="#winstack">Changing windows stacking order: raise and lower</a> + <li>Iconifying and de-iconifying a window + <li><a class="subsection" href="#wingetinfo">Getting informations about a window</a> + </ol> + <li><a class="section" href="#usecolor">Using colors to paint the rainbow</a> + <ol> + <li><a class="subsection" href="#colormap">Color maps</a> + <li><a class="subsection" href="#colormapalloc">Allocating and freeing Color Maps</a> + <li><a class="subsection" href="#alloccolor">Allocating and freeing a color entry</a> + <li>Drawing with a color + </ol> + <li><a class="section" href="#pixmaps">X Bitmaps and Pixmaps</a> + <ol> + <li><a class="subsection" href="#pixmapswhat">What is a X Bitmap ? An X Pixmap ?</a> + <li>Loading a bitmap from a file + <li>Drawing a bitmap in a window + <li><a class="subsection" href="#pixmapscreate">Creating a pixmap</a> + <li><a class="subsection" href="#pixmapsdraw">Drawing a pixmap in a window</a> + <li><a class="subsection" href="#pixmapsfree">Freeing a pixmap</a> + </ol> + <li><a class="subsection" href="#mousecursor">Messing with the mouse cursor</a> + <ol> + <li><a class="subsection" href="#mousecursorcreate">Creating and destroying a mouse cursor</a> + <li><a class="subsection" href="#mousecursorset">Setting a window's mouse cursor</a> + <li><a class="subsection" href="#mousecursorexample">Complete example</a> + </ol> + <li><a class="subsection" href="#translation">Translation of basic Xlib functions and macros</a> + <ol> + <li><a class="subsection" href="#displaystructure">Members of the Display structure</a> + <ol> + <li><a class="subsection" href="#ConnectionNumber">ConnectionNumber</a> + <li><a class="subsection" href="#DefaultScreen">DefaultScreen</a> + <li><a class="subsection" href="#QLength">QLength</a> + <li><a class="subsection" href="#ScreenCount">ScreenCount</a> + <li><a class="subsection" href="#ServerVendor">ServerVendor</a> + <li><a class="subsection" href="#ProtocolVersion">ProtocolVersion</a> + <li><a class="subsection" href="#ProtocolRevision">ProtocolRevision</a> + <li><a class="subsection" href="#VendorRelease">VendorRelease</a> + <li><a class="subsection" href="#DisplayString">DisplayString</a> + <li><a class="subsection" href="#BitmapUnit">BitmapUnit</a> + <li><a class="subsection" href="#BitmapBitOrder">BitmapBitOrder</a> + <li><a class="subsection" href="#BitmapPad">BitmapPad</a> + <li><a class="subsection" href="#ImageByteOrder">ImageByteOrder</a> + </ol> + <li><a class="subsection" href="#screenofdisplay">ScreenOfDisplay related functions</a> + <ol> + <li><a class="subsection" href="#ScreenOfDisplay">ScreenOfDisplay</a> + <li><a class="subsection" href="#DefaultScreenOfDisplay">DefaultScreenOfDisplay</a> + <li><a class="subsection" href="#RootWindow">RootWindow / RootWindowOfScreen</a> + <li><a class="subsection" href="#DefaultRootWindow">DefaultRootWindow</a> + <li><a class="subsection" href="#DefaultVisual">DefaultVisual / DefaultVisualOfScreen</a> + <li><a class="subsection" href="#DefaultGC">DefaultGC / DefaultGCOfScreen</a> + <li><a class="subsection" href="#BlackPixel">BlackPixel / BlackPixelOfScreen</a> + <li><a class="subsection" href="#WhitePixel">WhitePixel / WhitePixelOfScreen</a> + <li><a class="subsection" href="#DisplayWidth">DisplayWidth / WidthOfScreen</a> + <li><a class="subsection" href="#DisplayHeight">DisplayHeight / HeightOfScreen</a> + <li><a class="subsection" href="#DisplayWidthMM">DisplayWidthMM / WidthMMOfScreen</a> + <li><a class="subsection" href="#DisplayHeightMM">DisplayHeightMM / HeightMMOfScreen</a> + <li><a class="subsection" href="#DisplayPlanes">DisplayPlanes / DefaultDepth / DefaultDepthOfScreen / PlanesOfScreen</a> + <li><a class="subsection" href="#DefaultColormap">DefaultColormap / DefaultColormapOfScreen</a> + <li><a class="subsection" href="#MinCmapsOfScreen">MinCmapsOfScreen</a> + <li><a class="subsection" href="#MaxCmapsOfScreen">MaxCmapsOfScreen</a> + <li><a class="subsection" href="#DoesSaveUnders">DoesSaveUnders</a> + <li><a class="subsection" href="#DoesBackingStore">DoesBackingStore</a> + <li><a class="subsection" href="#EventMaskOfScreen">EventMaskOfScreen</a> + </ol> + <li><a class="subsection" href="#misc">Miscellaneaous macros</a> + <ol> + <li><a class="subsection" href="#DisplayOfScreen">DisplayOfScreen</a> + <li><a class="subsection" href="#DisplayCells">DisplayCells / CellsOfScreen</a> + </ol> + </ol> + </ol> + </div> + <div class="section"> + <ol> + <li class="title"><a name="intro">Introduction</a> + <p> + This tutorial is based on the + <a href="http://users.actcom.co.il/~choo/lupg/tutorials/xlib-programming/xlib-programming.html">Xlib Tutorial</a> + written by <a href="mailto:choor at atcom dot co dot il">Guy Keren</a>. The + author allowed me to take some parts of his text, mainly the text which + deals with the X Windows generality. + </p> + <p> + This tutorial is intended for people who want to start to program + with the <a href="http://xcb.freedesktop.org">XCB</a> + library. keep in mind that XCB, like the + <a href="http://tronche.com/gui/x/xlib/introduction">Xlib</a> + library, isn't what most programmers wanting to write X + applications are looking for. They should use a much higher + level GUI toolkit like Motif, + <a href="http://www.lesstif.org">LessTiff</a>, + <a href="http://www.gtk.org">GTK</a>, + <a href="http://www.trolltech.com">QT</a>, + <a href="http://www.enlightenment.org">EWL</a>, + <a href="http://www.enlightenment.org">ETK</a>, or use + <a href="http://cairographics.org">Cairo</a>. + However, + we need to start somewhere. More than this, knowing how things + work down below is never a bad idea. + </p> + <p> + After reading this tutorial, one should be able to write very + simple graphical programs, but not programs with decent user + interfaces. For such programs, one of the previously mentioned + libraries should be used. + </p> + <p> + But what is XCB? Xlib has been + the standard C binding for the <a href="http://www.x.org">X + Window System</a> protocol for many years now. It is an + excellent piece of work, but there are applications for which it + is not ideal, for example: + </p> + <ul> + <li><b>Small platforms</b>: Xlib is a large piece of code, and + it's difficult to make it smaller + <li><b>Latency hiding</b>: Xlib requests requiring a reply are + effectively synchronous: they block until the reply appears, + whether the result is needed immediately or not. + <li><b>Direct access to the protocol</b>: Xlib does quite a + bit of caching, layering, and similar optimizations. While this + is normally a feature, it makes it difficult to simply emit + specified X protocol requests and process specific + responses. + <li><b>Threaded applications</b>: While Xlib does attempt to + support multithreading, the API makes this difficult and + error-prone. + <li><b>New extensions</b>: The Xlib infrastructure provides + limited support for the new creation of X extension client side + code. + </ul> + <p> + For these reasons, among others, XCB, an X C binding, has been + designed to solve the above problems and thus provide a base for + </p> + <ul> + <li>Toolkit implementation. + <li>Direct protocol-level programming. + <li>Lightweight emulation of commonly used portions of the + Xlib API. + </ul> + <br> + <li class="title"><a name="Xmodel">The client and server model of the X window system</a> + <p> + The X Window System was developed with one major goal: + flexibility. The idea was that the way things look is one thing, + but the way things work is another matter. Thus, the lower + levels provide the tools required to draw windows, handle user + input, allow drawing graphics using colors (or black and white + screens), etc. To this point, a decision was made to separate + the system into two parts. A client that decides what to do, and + a server that actually draws on the screen and reads user input + in order to send it to the client for processing. + </p> + <p> + This model is the complete opposite of what is used to when + dealing with clients and servers. In our case, the user sits + near the machine controlled by the server, while the client + might be running on a remote machine. The server controls the + screens, mouse and keyboard. A client may connect to the server, + request that it draws a window (or several windows), and ask the + server to send it any input the user sends to these + windows. Thus, several clients may connect to a single X server + (one might be running mail software, one running a WWW + browser, etc). When input is sent by the user to some window, + the server sends a message to the client controlling this window + for processing. The client decides what to do with this input, + and sends the server requests for drawing in the window. + </p> + <p> + The whole session is carried out using the X message + protocol. This protocol was originally carried over the TCP/IP + protocol suite, allowing the client to run on any machine + connected to the same network that the server is. Later on, the + X servers were extended to allow clients running on the local + machine with more optimized access to the server (note that an X + protocol message may be several hundreds of KB in size), such as + using shared memory, or using Unix domain sockets (a method for + creating a logical channel on a Unix system between two processes). + </p> + <li class="title"><a name="asynch">GUI programming: the asynchronous model</a> + <p> + Unlike conventional computer programs, that carry some serial + nature, a GUI program usually uses an asynchronous programming + model, also known as "event-driven programming". This means that + that program mostly sits idle, waiting for events sent by the X + server, and then acts upon these events. An event may say "The + user pressed the 1st button mouse in spot (x,y)", or "The window + you control needs to be redrawn". In order for the program to be + responsive to the user input, as well as to refresh requests, it + needs to handle each event in a rather short period of time + (e.g. less that 200 milliseconds, as a rule of thumb). + </p> + <p> + This also implies that the program may not perform operations + that might take a long time while handling an event (such as + opening a network connection to some remote server, or + connecting to a database server, or even performing a long file + copy operation). Instead, it needs to perform all these + operations in an asynchronous manner. This may be done by using + various asynchronous models to perform the longish operations, + or by performing them in a different process or thread. + </p> + <p> + So the way a GUI program looks is something like that: + </p> + <ol> + <li>Perform initialization routines. + <li>Connect to the X server. + <li>Perform X-related initialization. + <li>While not finished: + <ol> + <li>Receive the next event from the X server. + <li>Handle the event, possibly sending various drawing + requests to the X server. + <li>If the event was a quit message, exit the loop. + </ol> + <li>Close down the connection to the X server. + <li>Perform cleanup operations. + </ol> + <br> + <li class="title"><a name="notions">Basic XCB notions</a> + <p> + XCB has been created to eliminate the need for + programs to actually implement the X protocol layer. This + library gives a program a very low-level access to any X + server. Since the protocol is standardized, a client using any + implementation of XCB may talk with any X server (the same + occurs for Xlib, of course). We now give a brief description of + the basic XCB notions. They will be detailed later. + </p> + <ol> + <li class="subtitle"><a name="conn">The X Connection</a> + <p> + The major notion of using XCB is the X Connection. This is a + structure representing the connection we have open with a + given X server. It hides a queue of messages coming from the + server, and a queue of pending requests that our client + intends to send to the server. In XCB, this structure is named + 'xcb_connection_t'. It is analogous to the Xlib Display. + When we open a connection to an X server, the + library returns a pointer to such a structure. Later, we + supply this pointer to any XCB function that should send + messages to the X server or receive messages from this server. + </p> + <li class="subtitle"><a name="requestsreplies">Requests and + replies: the Xlib killers</a> + <p> + To ask for information from the X server, we have to make a request + and ask for a reply. With Xlib, these two tasks are + automatically done: Xlib locks the system, sends a request, + waits for a reply from the X server and unlocks. This is + annoying, especially if one makes a lot of requests to the X + server. Indeed, Xlib has to wait for the end of a reply + before asking for the next request (because of the locks that + Xlib sends). For example, here is a time-line of N=4 + requests/replies with Xlib, with a round-trip latency + <b>T_round_trip</b> that is 5 times long as the time required + to write or read a request/reply (<b>T_write/T_read</b>): + </p> + <pre class="text"> + W-----RW-----RW-----RW-----R +</pre> + <ul> + <li>W: Writing request + <li>-: Stalled, waiting for data + <li>R: Reading reply + </ul> + <p> + The total time is N * (T_write + T_round_trip + T_read). + </p> + <p> + With XCB, we can suppress most of the round-trips as the + requests and the replies are not locked. We usually send a + request, then XCB returns to us a <b>cookie</b>, which is an + identifier. Then, later, we ask for a reply using this + <b>cookie</b> and XCB returns a + pointer to that reply. Hence, with XCB, we can send a lot of + requests, and later in the program, ask for all the replies + when we need them. Here is the time-line for 4 + requests/replies when we use this property of XCB: + </p> + <pre class="text"> + WWWW--RRRR +</pre> + <p> + The total time is N * T_write + max (0, T_round_trip - (N-1) * + T_write) + N * T_read. Which can be considerably faster than + all those Xlib round-trips. + </p> + <p> + Here is a program that computes the time to create 500 atoms + with Xlib and XCB. It shows the Xlib way, the bad XCB way + (which is similar to Xlib) and the good XCB way. On my + computer, XCB is 25 times faster than Xlib. + </p> + <pre class="code"> +#include <stdlib.h> +#include <stdio.h> +#include <string.h> +#include <sys/time.h> + +#include <xcb/xcb.h> + +#include <X11/Xlib.h> + +double +get_time(void) +{ + struct timeval timev; + + gettimeofday(&timev, NULL); + + return (double)timev.tv_sec + (((double)timev.tv_usec) / 1000000); +} + +int +main () +{ + xcb_connection_t *c; + xcb_atom_t *atoms; + xcb_intern_atom_cookie_t *cs; + char **names; + int count; + int i; + double start; + double end; + double diff; + + /* Xlib */ + Display *disp; + Atom *atoms_x; + double diff_x; + + c = xcb_connect (NULL, NULL); + + count = 500; + atoms = (xcb_atom_t *)malloc (count * sizeof (atoms)); + names = (char **)malloc (count * sizeof (char *)); + + /* init names */ + for (i = 0; i < count; ++i) { + char buf[100]; + + sprintf (buf, "NAME%d", i); + names[i] = strdup (buf); + } + + /* bad use */ + start = get_time (); + + for (i = 0; i < count; ++i) + atoms[i] = xcb_intern_atom_reply (c, + xcb_intern_atom (c, + 0, + strlen(names[i]), + names[i]), + NULL)->atom; + + end = get_time (); + diff = end - start; + printf ("bad use time : %f\n", diff); + + /* good use */ + start = get_time (); + + cs = (xcb_intern_atom_cookie_t *) malloc (count * sizeof(xcb_intern_atom_cookie_t)); + for(i = 0; i < count; ++i) + cs[i] = xcb_intern_atom (c, 0, strlen(names[i]), names[i]); + + for(i = 0; i < count; ++i) { + xcb_intern_atom_reply_t *r; + + r = xcb_intern_atom_reply(c, cs[i], 0); + if(r) + atoms[i] = r->atom; + free(r); + } + + end = get_time (); + printf ("good use time : %f\n", end - start); + printf ("ratio : %f\n", diff / (end - start)); + diff = end - start; + + /* free var */ + free (atoms); + free (cs); + + xcb_disconnect (c); + + /* Xlib */ + disp = XOpenDisplay (getenv("DISPLAY")); + + atoms_x = (Atom *)malloc (count * sizeof (atoms_x)); + + start = get_time (); + + for (i = 0; i < count; ++i) + atoms_x[i] = XInternAtom(disp, names[i], 0); + + end = get_time (); + diff_x = end - start; + printf ("Xlib use time : %f\n", diff_x); + printf ("ratio : %f\n", diff_x / diff); + + free (atoms_x); + for (i = 0; i < count; ++i) + free (names[i]); + free (names); + + XCloseDisplay (disp); + + return 0; +} +</pre> + <li class="subtitle"><a name="gc">The Graphic Context</a> + <p> + When we perform various drawing operations (graphics, text, + etc), we may specify various options for controlling how the + data will be drawn (what foreground and background colors to + use, how line edges will be connected, what font to use when + drawing some text, etc). In order to avoid the need to supply + hundreds of parameters to each drawing function, a graphical + context structure is used. We set the various drawing options + in this structure, and then we pass a pointer to this + structure to any drawing routines. This is rather handy, as we + often need to perform several drawing requests with the same + options. Thus, we would initialize a graphical context, set + the desired options, and pass this structure to all drawing + functions. + </p> + <p> + Note that graphic contexts have no client-side structure in + XCB, they're just XIDs. Xlib has a client-side structure + because it caches the GC contents so it can avoid making + redundant requests, but of course XCB doesn't do that. + </p> + <li class="subtitle"><a name="events">Events</a> + <p> + A structure is used to pass events received from the X + server. XCB supports exactly the events specified in the + protocol (33 events). This structure contains the type + of event received (including a bit for whether it came + from the server or another client), as well as the data associated with the + event (e.g. position on the screen where the event was + generated, mouse button associated with the event, region of + the screen associated with a "redraw" event, etc). The way to + read the event's data depends on the event type. + </p> + </ol> + <br> + <li class="title"><a name="use">Using XCB-based programs</a> + <br> + <ol> + <li class="subtitle"><a name="inst">Installation of XCB</a> + <p> + <b>TODO:</b> These instructions are out of date. + Just reference the <a href="http://xcb.freedesktop.org/">main XCB page</a> + so we don't have to maintain these instructions in more than + one place. + </p> + <p> + To build XCB from source, you need to have installed at + least: + </p> + <ul> + <li>pkgconfig 0.15.0 + <li><a href="http://www.gnu.org/software/automake/">automake 1.7</a> + <li><a href="http://www.gnu.org/software/autoconf/">autoconf 2.50</a> + <li><a href="http://www.check.org">check</a> + <li><a href="http://xmlsoft.org/XSLT/">xsltproc</a> + <li><a href="http://www.gnu.org/software/gperf/">gperf 3.0.1</a> + </ul> + <p> + You have to checkout in the git repository the following modules: + </p> + <ul> + <li>Xau from xlibs + <li>xcb-proto + <li>xcb + </ul> + <p> + Note that xcb-proto exists only to install header + files, so typing 'make' or 'make all' will produce the message + "Nothing to be done for 'all'". That's normal. + </p> + <li class="subtitle"><a name="comp">Compiling XCB-based programs</a> + <p> + Compiling XCB-based programs requires linking them with the XCB + library. This is easily done thanks to pkgconfig: + </p> + <pre class="text"> +gcc -Wall prog.c -o prog `pkg-config --cflags --libs xcb` +</pre> + </ol> + <li class="title"><a name="openconn">Opening and closing the connection to an X server</a> + <p> + An X program first needs to open the connection to the X + server. There is a function that opens a connection. It requires + the display name, or NULL. In the latter case, the display name + will be the one in the environment variable DISPLAY. + </p> + <pre class="code"> +<span class="type">xcb_connection_t</span> *xcb_connect (<span class="keyword">const</span> <span class="type">char</span> *displayname, + <span class="type">int</span> *screenp); +</pre> + <p> + The second parameter returns the screen number used for the + connection. The returned structure describes an XCB connection + and is opaque. Here is how the connection can be opened: + </p> + <pre class="code"> +#<span class="include">include</span> <span class="string"><xcb/xcb.h></span> + +<span class="type">int</span> +<span class="function">main</span> () +{ + <span class="type">xcb_connection_t</span> *c; + + /* Open the connection to the X server. Use the DISPLAY environment variable as the default display name */ + c = xcb_connect (NULL, NULL); + + <span class="keyword">return</span> 0; +} +</pre> + <p> + To close a connection, it suffices to use: + </p> + <pre class="code"> +<span class="type">void</span> xcb_disconnect (<span class="type">xcb_connection_t</span> *c); +</pre> + <div class="comp"> + <div class="title"> + Comparison Xlib/XCB + </div> + <div class="xlib"> + <ul> + <li>XOpenDisplay () + </ul> + </div> + <div class="xcb"> + <ul> + <li>xcb_connect () + </ul> + </div> + <div class="xlib"> + <ul> + <li>XCloseDisplay () + </ul> + </div> + <div class="xcb"> + <ul> + <li>xcb_disconnect () + </ul> + </div> + </div> + <br> + <li class="title"><a name="screen">Checking basic information about a connection</a> + <p> + Once we have opened a connection to an X server, we should check some + basic information about it: what screens it has, what is the + size (width and height) of the screen, how many colors it + supports (black and white ? grey scale ?, 256 colors ? more ?), + and so on. We get such information from the xcb_screen_t + structure: + </p> + <pre class="code"> +typedef struct { + xcb_window_t root; + xcb_colormap_t default_colormap; + uint32_t white_pixel; + uint32_t black_pixel; + uint32_t current_input_masks; + uint16_t width_in_pixels; + uint16_t height_in_pixels; + uint16_t width_in_millimeters; + uint16_t height_in_millimeters; + uint16_t min_installed_maps; + uint16_t max_installed_maps; + xcb_visualid_t root_visual; + uint8_t backing_stores; + uint8_t save_unders; + uint8_t root_depth; + uint8_t allowed_depths_len; +} xcb_screen_t; +</pre> + <p> + We could retrieve the first screen of the connection by using the + following function: + </p> + <pre class="code"> +xcb_screen_iterator_t xcb_setup_roots_iterator (xcb_setup_t *R); +</pre> + <p> + Here is a small program that shows how to use this function: + </p> + <pre class="code"> +#include <stdio.h> + +#include <xcb/xcb.h> + +int +main () +{ + xcb_connection_t *c; + xcb_screen_t *screen; + int screen_nbr; + xcb_screen_iterator_t iter; + + /* Open the connection to the X server. Use the DISPLAY environment variable */ + c = xcb_connect (NULL, &screen_nbr); + + /* Get the screen #screen_nbr */ + iter = xcb_setup_roots_iterator (xcb_get_setup (c)); + for (; iter.rem; --screen_nbr, xcb_screen_next (&iter)) + if (screen_nbr == 0) { + screen = iter.data; + break; + } + + printf ("\n"); + printf ("Informations of screen %ld:\n", screen->root); + printf (" width.........: %d\n", screen->width_in_pixels); + printf (" height........: %d\n", screen->height_in_pixels); + printf (" white pixel...: %ld\n", screen->white_pixel); + printf (" black pixel...: %ld\n", screen->black_pixel); + printf ("\n"); + + return 0; +} +</pre> + <li class="title"><a name="helloworld">Creating a basic window - the "hello world" program</a> + <p> + After we got some basic information about our screen, we can + create our first window. In the X Window System, a window is + characterized by an Id. So, in XCB, a window is of type: + </p> + <pre class="code"> +typedef uint32_t xcb_window_t; +</pre> + <p> + We first ask for a new Id for our window, with this function: + </p> + <pre class="code"> +xcb_window_t xcb_generate_id(xcb_connection_t *c); +</pre> + <p> + Then, XCB supplies the following function to create new windows: + </p> + <pre class="code"> +xcb_void_cookie_t xcb_create_window (xcb_connection_t *c, /* Pointer to the xcb_connection_t structure */ + uint8_t depth, /* Depth of the screen */ + xcb_window_t wid, /* Id of the window */ + xcb_window_t parent, /* Id of an existing window that should be the parent of the new window */ + int16_t x, /* X position of the top-left corner of the window (in pixels) */ + int16_t y, /* Y position of the top-left corner of the window (in pixels) */ + uint16_t width, /* Width of the window (in pixels) */ + uint16_t height, /* Height of the window (in pixels) */ + uint16_t border_width, /* Width of the window's border (in pixels) */ + uint16_t _class, + xcb_visualid_t visual, + uint32_t value_mask, + const uint32_t *value_list); +</pre> + <p> + The fact that we created the window does not mean that it will + be drawn on screen. By default, newly created windows are not + mapped on the screen (they are invisible). In order to make our + window visible, we use the function <span class="code">xcb_map_window()</span>, whose + prototype is + </p> + <pre class="code"> +xcb_void_cookie_t xcb_map_window (xcb_connection_t *c, + xcb_window_t window); +</pre> + <p> + Finally, here is a small program to create a window of size + 150x150 pixels, positioned at the top-left corner of the screen: + </p> + <pre class="code"> +#include <unistd.h> /* pause() */ + +#include <xcb/xcb.h> + +int +main () +{ + xcb_connection_t *c; + xcb_screen_t *screen; + xcb_window_t win; + + /* Open the connection to the X server */ + c = xcb_connect (NULL, NULL); + + /* Get the first screen */ + screen = xcb_setup_roots_iterator (xcb_get_setup (c)).data; + + /* Ask for our window's Id */ + win = xcb_generate_id(c); + + /* Create the window */ + xcb_create_window (c, /* Connection */ + XCB_COPY_FROM_PARENT, /* depth (same as root)*/ + win, /* window Id */ + screen->root, /* parent window */ + 0, 0, /* x, y */ + 150, 150, /* width, height */ + 10, /* border_width */ + XCB_WINDOW_CLASS_INPUT_OUTPUT, /* class */ + screen->root_visual, /* visual */ + 0, NULL); /* masks, not used yet */ + + /* Map the window on the screen */ + xcb_map_window (c, win); + + /* Make sure commands are sent before we pause, so window is shown */ + xcb_flush (c); + + pause (); /* hold client until Ctrl-C */ + + return 0; +} +</pre> + <p> + In this code, you see one more function - <span class="code">xcb_flush()</span>, not explained + yet. It is used to flush all the pending requests. More + precisely, there are 2 functions that do such things. The first + one is <span class="code">xcb_flush()</span>: + </p> + <pre class="code"> +int xcb_flush (xcb_connection_t *c); +</pre> + <p> + This function flushes all pending requests to the X server (much + like the <span class="code">fflush()</span> function is used to + flush standard output). The second function is + <span class="code">xcb_aux_sync()</span>: + </p> + <pre class="code"> +int xcb_aux_sync (xcb_connection_t *c); +</pre> + <p> + This functions also flushes all pending requests to the X + server, and then waits until the X server finishing processing + these requests. In a normal program, this will not be necessary + (we'll see why when we get to write a normal X program), but for + now, we put it there. + </p> + <p> + The window that is created by the above code has a non defined + background. This one can be set to a specific color, + thanks to the two last parameters of + <span class="code">xcb_create_window()</span>, which are not + described yet. See the subsections + <a href="#winconf">Configuring a window</a> or + <a href="#winconf">Registering for event types using event masks</a> + for examples on how to use these parameters. In addition, as no + events are handled, you have to make a Ctrl-C to interrupt the + program. + </p> + <p> + <b>TODO</b>: one should tell what these functions return and + about the generic error + </p> + <div class="comp"> + <div class="title"> + Comparison Xlib/XCB + </div> + <div class="xlib"> + <ul> + <li>XCreateWindow () + </ul> + </div> + <div class="xcb"> + <ul> + <li>xcb_generate_id () + <li>xcb_create_window () + </ul> + </div> + </div> + <br> + <li class="title"><a name="drawing">Drawing in a window</a> + <p> + Drawing in a window can be done using various graphical + functions (drawing pixels, lines, rectangles, etc). In order to + draw in a window, we first need to define various general + drawing parameters (what line width to use, which color to draw + with, etc). This is done using a graphical context. + </p> + <ol> + <li class="subtitle"><a name="allocgc">Allocating a Graphics Context</a> + <p> + As we said, a graphical context defines several attributes to + be used with the various drawing functions. For this, we + define a graphical context. We can use more than one graphical + context with a single window, in order to draw in multiple + styles (different colors, different line widths, etc). In XCB, + a Graphics Context is, as a window, characterized by an Id: + </p> + <pre class="code"> +typedef uint32_t xcb_gcontext_t; +</pre> + <p> + We first ask the X server to attribute an Id to our graphic + context with this function: + </p> + <pre class="code"> +xcb_gcontext_t xcb_generate_id (xcb_connection_t *c); +</pre> + <p> + Then, we set the attributes of the graphic context with this function: + </p> + <pre class="code"> +xcb_void_cookie_t xcb_create_gc (xcb_connection_t *c, + xcb_gcontext_t cid, + xcb_drawable_t drawable, + uint32_t value_mask, + const uint32_t *value_list); +</pre> + <p> + We give now an example on how to allocate a graphic context + that specifies that each drawing function that uses it will + draw in foreground with a black color. + </p> + <pre class="code"> +#include <xcb/xcb.h> + +int +main () +{ + xcb_connection_t *c; + xcb_screen_t *screen; + xcb_drawable_t win; + xcb_gcontext_t black; + uint32_t mask; + uint32_t value[1]; + + /* Open the connection to the X server and get the first screen */ + c = xcb_connect (NULL, NULL); + screen = xcb_setup_roots_iterator (xcb_get_setup (c)).data; + + /* Create a black graphic context for drawing in the foreground */ + win = screen->root; + black = xcb_generate_id (c); + mask = XCB_GC_FOREGROUND; + value[0] = screen->black_pixel; + xcb_create_gc (c, black, win, mask, value); + + return 0; +} +</pre> + <p> + Note should be taken regarding the role of "value_mask" and + "value_list" in the prototype of <span class="code">xcb_create_gc()</span>. Since a + graphic context has many attributes, and since we often just + want to define a few of them, we need to be able to tell the + <span class="code">xcb_create_gc()</span> which attributes we + want to set. This is what the "value_mask" parameter is + for. We then use the "value_list" parameter to specify actual + values for the attribute we defined in "value_mask". Thus, for + each constant used in "value_list", we will use the matching + constant in "value_mask". In this case, we define a graphic + context with one attribute: when drawing (a point, a line, + etc), the foreground color will be black. The rest of the + attributes of this graphic context will be set to their + default values. + </p> + <p> + See the next Subsection for more details. + </p> + <div class="comp"> + <div class="title"> + Comparison Xlib/XCB + </div> + <div class="xlib"> + <ul> + <li>XCreateGC () + </ul> + </div> + <div class="xcb"> + <ul> + <li>xcb_generate_id () + <li>xcb_create_gc () + </ul> + </div> + </div> + <br> + <li class="subtitle"><a name="changegc">Changing the attributes of a Graphics Context</a> + <p> + Once we have allocated a Graphic Context, we may need to + change its attributes (for example, changing the foreground + color we use to draw a line, or changing the attributes of the + font we use to display strings. See Subsections Drawing with a + color and + <a href="#assigningfont">Assigning a Font to a Graphic Context</a>). + This is done by using this function: + </p> + <pre class="code"> +xcb_void_cookie_t xcb_change_gc (xcb_connection_t *c, /* The XCB Connection */ + xcb_gcontext_t gc, /* The Graphic Context */ + uint32_t value_mask, /* Components of the Graphic Context that have to be set */ + const uint32_t *value_list); /* Value as specified by value_mask */ +</pre> + <p> + The <span class="code">value_mask</span> parameter could take + any combination of these masks from the xcb_gc_t enumeration: + </p> + <ul> + <li>XCB_GC_FUNCTION + <li>XCB_GC_PLANE_MASK + <li>XCB_GC_FOREGROUND + <li>XCB_GC_BACKGROUND + <li>XCB_GC_LINE_WIDTH + <li>XCB_GC_LINE_STYLE + <li>XCB_GC_CAP_STYLE + <li>XCB_GC_JOIN_STYLE + <li>XCB_GC_FILL_STYLE + <li>XCB_GC_FILL_RULE + <li>XCB_GC_TILE + <li>XCB_GC_STIPPLE + <li>XCB_GC_TILE_STIPPLE_ORIGIN_X + <li>XCB_GC_TILE_STIPPLE_ORIGIN_Y + <li>XCB_GC_FONT + <li>XCB_GC_SUBWINDOW_MODE + <li>XCB_GC_GRAPHICS_EXPOSURES + <li>XCB_GC_CLIP_ORIGIN_X + <li>XCB_GC_CLIP_ORIGIN_Y + <li>XCB_GC_CLIP_MASK + <li>XCB_GC_DASH_OFFSET + <li>XCB_GC_DASH_LIST + <li>XCB_GC_ARC_MODE + </ul> + <p> + It is possible to set several attributes at the same + time (for example setting the attributes of a font and the + color which will be used to display a string), by OR'ing these + values in <span class="code">value_mask</span>. Then + <span class="code">value_list</span> has to be an array which + lists the value for the respective attributes. <b>These values + must be in the same order as masks listed above.</b> See Subsection + Drawing with a color to have an example. + </p> + <p> + <b>TODO</b>: set the links of the 3 subsections, once they will + be written :) + </p> + <p> + <b>TODO</b>: give an example which sets several attributes. + </p> + <li class="subtitle"><a name="drawingprim">Drawing primitives: point, line, box, circle,...</a> + <p> + After we have created a Graphic Context, we can draw on a + window using this Graphic Context, with a set of XCB + functions, collectively called "drawing primitives". Let see + how they are used. + </p> + <p> + To draw a point, or several points, we use + </p> + <pre class="code"> +xcb_void_cookie_t xcb_poly_point (xcb_connection_t *c, /* The connection to the X server */ + uint8_t coordinate_mode, /* Coordinate mode, usually set to XCB_COORD_MODE_ORIGIN */ + xcb_drawable_t drawable, /* The drawable on which we want to draw the point(s) */ + xcb_gcontext_t gc, /* The Graphic Context we use to draw the point(s) */ + uint32_t points_len, /* The number of points */ + const xcb_point_t *points); /* An array of points */ +</pre> + <p> + The <span class="code">coordinate_mode</span> parameter + specifies the coordinate mode. Available values are + </p> + <ul> + <li><span class="code">XCB_COORD_MODE_ORIGIN</span> + <li><span class="code">XCB_COORD_MODE_PREVIOUS</span> + </ul> + <p> + If XCB_COORD_MODE_PREVIOUS is used, then all points but the first one + are relative to the immediately previous point. + </p> + <p> + The <span class="code">xcb_point_t</span> type is just a + structure with two fields (the coordinates of the point): + </p> + <pre class="code"> +typedef struct { + int16_t x; + int16_t y; +} xcb_point_t; +</pre> + <p> + You could see an example in xpoints.c. <b>TODO</b> Set the link. + </p> + <p> + To draw a line, or a polygonal line, we use + </p> + <pre class="code"> +xcb_void_cookie_t xcb_poly_line (xcb_connection_t *c, /* The connection to the X server */ + uint8_t coordinate_mode, /* Coordinate mode, usually set to XCB_COORD_MODE_ORIGIN */ + xcb_drawable_t drawable, /* The drawable on which we want to draw the line(s) */ + xcb_gcontext_t gc, /* The Graphic Context we use to draw the line(s) */ + uint32_t points_len, /* The number of points in the polygonal line */ + const xcb_point_t *points); /* An array of points */ +</pre> + <p> + This function will draw the line between the first and the + second points, then the line between the second and the third + points, and so on. + </p> + <p> + To draw a segment, or several segments, we use + </p> + <pre class="code"> +xcb_void_cookie_t xcb_poly_segment (xcb_connection_t *c, /* The connection to the X server */ + xcb_drawable_t drawable, /* The drawable on which we want to draw the segment(s) */ + xcb_gcontext_t gc, /* The Graphic Context we use to draw the segment(s) */ + uint32_t segments_len, /* The number of segments */ + const xcb_segment_t *segments); /* An array of segments */ +</pre> + <p> + The <span class="code">xcb_segment_t</span> type is just a + structure with four fields (the coordinates of the two points + that define the segment): + </p> + <pre class="code"> +typedef struct { + int16_t x1; + int16_t y1; + int16_t x2; + int16_t y2; +} xcb_segment_t; +</pre> + <p> + To draw a rectangle, or several rectangles, we use + </p> + <pre class="code"> +xcb_void_cookie_t xcb_poly_rectangle (xcb_connection_t *c, /* The connection to the X server */ + xcb_drawable_t drawable, /* The drawable on which we want to draw the rectangle(s) */ + xcb_gcontext_t gc, /* The Graphic Context we use to draw the rectangle(s) */ + uint32_t rectangles_len, /* The number of rectangles */ + const xcb_rectangle_t *rectangles); /* An array of rectangles */ +</pre> + <p> + The <span class="code">xcb_rectangle_t</span> type is just a + structure with four fields (the coordinates of the top-left + corner of the rectangle, and its width and height): + </p> + <pre class="code"> +typedef struct { + int16_t x; + int16_t y; + uint16_t width; + uint16_t height; +} xcb_rectangle_t; +</pre> + <!-- There's no coordinate_mode. Is it normal? --> + <!-- [iano] Yes, it's not in the protocol. --> + <p> + To draw an elliptical arc, or several elliptical arcs, we use + </p> + <pre class="code"> +xcb_void_cookie_t xcb_poly_arc (xcb_connection_t *c, /* The connection to the X server */ + xcb_drawable_t drawable, /* The drawable on which we want to draw the arc(s) */ + xcb_gcontext_t gc, /* The Graphic Context we use to draw the arc(s) */ + uint32_t arcs_len, /* The number of arcs */ + const xcb_arc_t *arcs); /* An array of arcs */ +</pre> + <p> + The <span class="code">xcb_arc_t</span> type is a structure with + six fields: + </p> + <pre class="code"> +typedef struct { + int16_t x; /* Top left x coordinate of the rectangle surrounding the ellipse */ + int16_t y; /* Top left y coordinate of the rectangle surrounding the ellipse */ + uint16_t width; /* Width of the rectangle surrounding the ellipse */ + uint16_t height; /* Height of the rectangle surrounding the ellipse */ + int16_t angle1; /* Angle at which the arc begins */ + int16_t angle2; /* Angle at which the arc ends */ +} xcb_arc_t; +</pre> + <div class="emph"> + <p> + Note: the angles are expressed in units of 1/64 of a degree, + so to have an angle of 90 degrees, starting at 0, + <span class="code">angle1 = 0</span> and + <span class="code">angle2 = 90 << 6</span>. Positive angles + indicate counterclockwise motion, while negative angles + indicate clockwise motion. + </p> + </div> + <!-- I think that (x,y) should be the center of the + ellipse, and (width, height) the radius. It's more logical. --> + <!-- iano: Yes, and I bet some toolkits do that. + But the protocol (and many other graphics APIs) define arcs + by bounding rectangles. --> + <p> + The corresponding function which fill inside the geometrical + object are listed below, without further explanation, as they + are used as the above functions. + </p> + <p> + To Fill a polygon defined by the points given as arguments , + we use + </p> + <pre class="code"> +xcb_void_cookie_t xcb_fill_poly (xcb_connection_t *c, + xcb_drawable_t drawable, + xcb_gcontext_t gc, + uint8_t shape, + uint8_t coordinate_mode, + uint32_t points_len, + const xcb_point_t *points); +</pre> + <p> + The <span class="code">shape</span> parameter specifies a + shape that helps the server to improve performance. Available + values are + </p> + <ul> + <li><span class="code">XCB_POLY_SHAPE_COMPLEX</span> + <li><span class="code">XCB_POLY_SHAPE_NONCONVEX</span> + <li><span class="code">XCB_POLY_SHAPE_CONVEX</span> + </ul> + <p> + To fill one or several rectangles, we use + </p> + <pre class="code"> +xcb_void_cookie_t xcb_poly_fill_rectangle (xcb_connection_t *c, + xcb_drawable_t drawable, + xcb_gcontext_t gc, + uint32_t rectangles_len, + const xcb_rectangle_t *rectangles); +</pre> + <p> + To fill one or several arcs, we use + </p> + <pre class="code"> +xcb_void_cookie_t xcb_poly_fill_arc (xcb_connection_t *c, + xcb_drawable_t drawable, + xcb_gcontext_t gc, + uint32_t arcs_len, + const xcb_arc_t *arcs); +</pre> + <br> + <a name="points.c"></a> + <p> + To illustrate these functions, here is an example that draws + four points, a polygonal line, two segments, two rectangles + and two arcs. Remark that we use events for the first time, as + an introduction to the next section. + </p> + <p> + <b>TODO:</b> Use screen->root_depth for depth parameter. + </p> + <pre class="code"> +#include <stdlib.h> +#include <stdio.h> + +#include <xcb/xcb.h> + +int +main () +{ + xcb_connection_t *c; + xcb_screen_t *screen; + xcb_drawable_t win; + xcb_gcontext_t foreground; + xcb_generic_event_t *e; + uint32_t mask = 0; + uint32_t values[2]; + + /* geometric objects */ + xcb_point_t points[] = { + {10, 10}, + {10, 20}, + {20, 10}, + {20, 20}}; + + xcb_point_t polyline[] = { + {50, 10}, + { 5, 20}, /* rest of points are relative */ + {25,-20}, + {10, 10}}; + + xcb_segment_t segments[] = { + {100, 10, 140, 30}, + {110, 25, 130, 60}}; + + xcb_rectangle_t rectangles[] = { + { 10, 50, 40, 20}, + { 80, 50, 10, 40}}; + + xcb_arc_t arcs[] = { + {10, 100, 60, 40, 0, 90 << 6}, + {90, 100, 55, 40, 0, 270 << 6}}; + + /* Open the connection to the X server */ + c = xcb_connect (NULL, NULL); + + /* Get the first screen */ + screen = xcb_setup_roots_iterator (xcb_get_setup (c)).data; + + /* Create black (foreground) graphic context */ + win = screen->root; + + foreground = xcb_generate_id (c); + mask = XCB_GC_FOREGROUND | XCB_GC_GRAPHICS_EXPOSURES; + values[0] = screen->black_pixel; + values[1] = 0; + xcb_create_gc (c, foreground, win, mask, values); + + /* Ask for our window's Id */ + win = xcb_generate_id(c); + + /* Create the window */ + mask = XCB_CW_BACK_PIXEL | XCB_CW_EVENT_MASK; + values[0] = screen->white_pixel; + values[1] = XCB_EVENT_MASK_EXPOSURE; + xcb_create_window (c, /* Connection */ + XCB_COPY_FROM_PARENT, /* depth */ + win, /* window Id */ + screen->root, /* parent window */ + 0, 0, /* x, y */ + 150, 150, /* width, height */ + 10, /* border_width */ + XCB_WINDOW_CLASS_INPUT_OUTPUT, /* class */ + screen->root_visual, /* visual */ + mask, values); /* masks */ + + /* Map the window on the screen */ + xcb_map_window (c, win); + + + /* We flush the request */ + xcb_flush (c); + + while ((e = xcb_wait_for_event (c))) { + switch (e->response_type & ~0x80) { + case XCB_EXPOSE: { + /* We draw the points */ + xcb_poly_point (c, XCB_COORD_MODE_ORIGIN, win, foreground, 4, points); + + /* We draw the polygonal line */ + xcb_poly_line (c, XCB_COORD_MODE_PREVIOUS, win, foreground, 4, polyline); + + /* We draw the segements */ + xcb_poly_segment (c, win, foreground, 2, segments); + + /* We draw the rectangles */ + xcb_poly_rectangle (c, win, foreground, 2, rectangles); + + /* We draw the arcs */ + xcb_poly_arc (c, win, foreground, 2, arcs); + + /* We flush the request */ + xcb_flush (c); + + break; + } + default: { + /* Unknown event type, ignore it */ + break; + } + } + /* Free the Generic Event */ + free (e); + } + + return 0; +} +</pre> + </ol> + <li class="title"><a name="xevents">X Events</a> + <p> + In an X program, everything is driven by events. Event painting + on the screen is sometimes done as a response to an event (an + <span class="code">Expose</span> event). If part of a program's + window that was hidden, gets exposed (e.g. the window was raised + above other widows), the X server will send an "expose" event to + let the program know it should repaint that part of the + window. User input (key presses, mouse movement, etc) is also + received as a set of events. + </p> + <ol> + <li class="subtitle"><a name="register">Registering for event types using event masks</a> + <p> + During the creation of a window, you should give it what kind + of events it wishes to receive. Thus, you may register for + various mouse (also called pointer) events, keyboard events, + expose events, and so on. This is done for optimizing the + server-to-client connection (i.e. why send a program (that + might even be running at the other side of the globe) an event + it is not interested in ?) + </p> + <p> + In XCB, you use the "value_mask" and "value_list" data in the + <span class="code">xcb_create_window()</span> function to + register for events. Here is how we register for + <span class="code">Expose</span> event when creating a window: + </p> + <pre class="code"> + mask = XCB_CW_EVENT_MASK; + valwin[0] = XCB_EVENT_MASK_EXPOSURE; + win = xcb_generate_id (c); + xcb_create_window (c, depth, win, root->root, + 0, 0, 150, 150, 10, + XCB_WINDOW_CLASS_INPUT_OUTPUT, root->root_visual, + mask, valwin); +</pre> + <p> + <span class="code">XCB_EVENT_MASK_EXPOSURE</span> is a constant defined + in the xcb_event_mask_t enumeration in the "xproto.h" header file. If we wanted to register for several + event types, we can logically "or" them, as follows: + </p> + <pre class="code"> + mask = XCB_CW_EVENT_MASK; + valwin[0] = XCB_EVENT_MASK_EXPOSURE | XCB_EVENT_MASK_BUTTON_PRESS; + win = xcb_generate_id (c); + xcb_create_window (c, depth, win, root->root, + 0, 0, 150, 150, 10, + XCB_WINDOW_CLASS_INPUT_OUTPUT, root->root_visual, + mask, valwin); +</pre> + <p> + This registers for <span class="code">Expose</span> events as + well as for mouse button presses inside the created + window. You should note that a mask may represent several + event sub-types. + </p> + <p> + The values that a mask could take are given + by the <span class="code">xcb_cw_t</span> enumeration: + </p> + <pre class="code"> +typedef enum { + XCB_CW_BACK_PIXMAP = 1L<<0, + XCB_CW_BACK_PIXEL = 1L<<1, + XCB_CW_BORDER_PIXMAP = 1L<<2, + XCB_CW_BORDER_PIXEL = 1L<<3, + XCB_CW_BIT_GRAVITY = 1L<<4, + XCB_CW_WIN_GRAVITY = 1L<<5, + XCB_CW_BACKING_STORE = 1L<<6, + XCB_CW_BACKING_PLANES = 1L<<7, + XCB_CW_BACKING_PIXEL = 1L<<8, + XCB_CW_OVERRIDE_REDIRECT = 1L<<9, + XCB_CW_SAVE_UNDER = 1L<<10, + XCB_CW_EVENT_MASK = 1L<<11, + XCB_CW_DONT_PROPAGATE = 1L<<12, + XCB_CW_COLORMAP = 1L<<13, + XCB_CW_CURSOR = 1L<<14 +} xcb_cw_t; +</pre> + <div class="emph"> + <p>Note: we must be careful when setting the values of the valwin + parameter, as they have to follow the order the + <span class="code">xcb_cw_t</span> enumeration. Here is an + example: + </p> + </div> + <pre class="code"> + mask = XCB_CW_EVENT_MASK | XCB_CW_BACK_PIXMAP; + valwin[0] = XCB_NONE; /* for XCB_CW_BACK_PIXMAP (whose value is 1) */ + valwin[1] = XCB_EVENT_MASK_EXPOSURE | XCB_EVENT_MASK_BUTTON_PRESS; /* for XCB_CW_EVENT_MASK, whose value (2048) */ + /* is greater than the one of XCB_CW_BACK_PIXMAP */ +</pre> + <p> + If the window has already been created, we can use the + <span class="code">xcb_change_window_attributes()</span> function to set + the events that the window will receive. The subsection + <a href="#winconf">Configuring a window</a> shows its + prototype. As an example, here is a piece of code that + configures the window to receive the + <span class="code">Expose</span> and + <span class="code">ButtonPress</span> events: + </p> + <pre class="code"> +const static uint32_t values[] = { XCB_EVENT_MASK_EXPOSURE | XCB_EVENT_MASK_BUTTON_PRESS }; + +/* The connection c and the window win are supposed to be defined */ + +xcb_change_window_attributes (c, win, XCB_CW_EVENT_MASK, values); +</pre> + <div class="emph"> + <p> + Note: A common bug programmers do is adding code to handle new + event types in their program, while forgetting to add the + masks for these events in the creation of the window. Such a + programmer then should sit down for hours debugging his + program, wondering "Why doesn't my program notice that I + released the button?", only to find that they registered for + button press events but not for button release events. + </p> + </div> + <li class="subtitle"><a name="loop">Receiving events: writing the events loop</a> + <p> + After we have registered for the event types we are interested + in, we need to enter a loop of receiving events and handling + them. There are two ways to receive events: a blocking way and + a non-blocking way: + </p> + <ul> + <li> + <span class="code">xcb_wait_for_event (xcb_connection_t *c)</span> + is the blocking way. It waits (so blocks...) until an event is + queued in the X server. Then it retrieves it into a newly + allocated structure (it dequeues it from the queue) and returns + it. This structure has to be freed. The function returns + <span class="code">NULL</span> if an error occurs. + + <br> + <li> + <span class="code">xcb_poll_for_event (xcb_connection_t *c, int + *error)</span> is the non-blocking way. It looks at the event + queue and returns (and dequeues too) an existing event into + a newly allocated structure. This structure has to be + freed. It returns <span class="code">NULL</span> if there is + no event. If an error occurs, the parameter <span + class="code">error</span> will be filled with the error + status. + </ul> + <p> + There are various ways to write such a loop. We present two + ways to write such a loop, with the two functions above. The + first one uses <span class="code">xcb_wait_for_event_t</span>, which + is similar to an event Xlib loop using only <span + class="code">XNextEvent</span>: + </p> + <pre class="code"> + xcb_generic_event_t *e; + + while ((e = xcb_wait_for_event (c))) { + switch (e->response_type & ~0x80) { + case XCB_EXPOSE: { + /* Handle the Expose event type */ + xcb_expose_event_t *ev = (xcb_expose_event_t *)e; + + /* ... */ + + break; + } + case XCB_BUTTON_PRESS: { + /* Handle the ButtonPress event type */ + xcb_button_press_event_t *ev = (xcb_button_press_event_t *)e; + + /* ... */ + + break; + } + default: { + /* Unknown event type, ignore it */ + break; + } + } + /* Free the Generic Event */ + free (e); + } +</pre> + <p> + You will certainly want to use <span + class="code">xcb_poll_for_event(xcb_connection_t *c, int + *error)</span> if, in Xlib, you use <span + class="code">XPending</span> or + <span class="code">XCheckMaskEvent</span>: + </p> + <pre class="code"> + while (XPending (display)) { + XEvent ev; + + XNextEvent(d, &ev); + + /* Manage your event */ + } +</pre> + <p> + Such a loop in XCB looks like: + </p> + <pre class="code"> + xcb_generic_event_t *ev; + + while ((ev = xcb_poll_for_event (conn, 0))) { + /* Manage your event */ + } +</pre> + <p> + The events are managed in the same way as with <span + class="code">xcb_wait_for_event_t</span>. + Obviously, we will need to give the user some way of + terminating the program. This is usually done by handling a + special "quit" event, as we will soon see. + </p> + <div class="comp"> + <div class="title"> + Comparison Xlib/XCB + </div> + <div class="xlib"> + <ul> + <li>XNextEvent () + </ul> + </div> + <div class="xcb"> + <ul> + <li>xcb_wait_for_event () + </ul> + </div> + <div class="xlib"> + <ul> + <li>XPending () + <li>XCheckMaskEvent () + </ul> + </div> + <div class="xcb"> + <ul> + <li>xcb_poll_for_event () + </ul> + </div> + </div> + <br> + <li class="subtitle"><a name="expose">Expose events</a> + <p> + The <span class="code">Expose</span> event is one of the most + basic (and most used) events an application may receive. It + will be sent to us in one of several cases: + </p> + <ul> + <li>A window that covered part of our window has moved + away, exposing part (or all) of our window. + <li>Our window was raised above other windows. + <li>Our window mapped for the first time. + <li>Our window was de-iconified. + </ul> + <p> + You should note the implicit assumption hidden here: the + contents of our window is lost when it is being obscured + (covered) by either windows. One may wonder why the X server + does not save this contents. The answer is: to save + memory. After all, the number of windows on a display at a + given time may be very large, and storing the contents of all + of them might require a lot of memory. Actually, there is a + way to tell the X server to store the contents of a window in + special cases, as we will see later. + </p> + <p> + When we get an <span class="code">Expose</span> event, we + should take the event's data from the members of the following + structure: + </p> + <pre class="code"> +typedef struct { + uint8_t response_type; /* The type of the event, here it is XCB_EXPOSE */ + uint8_t pad0; + uint16_t sequence; + xcb_window_t window; /* The Id of the window that receives the event (in case */ + /* our application registered for events on several windows */ + uint16_t x; /* The x coordinate of the top-left part of the window that needs to be redrawn */ + uint16_t y; /* The y coordinate of the top-left part of the window that needs to be redrawn */ + uint16_t width; /* The width of the part of the window that needs to be redrawn */ + uint16_t height; /* The height of the part of the window that needs to be redrawn */ + uint16_t count; +} xcb_expose_event_t; +</pre> + <li class="subtitle"><a name="userinput">Getting user input</a> + <p> + User input traditionally comes from two sources: the mouse + and the keyboard. Various event types exist to notify us of + user input (a key being presses on the keyboard, a key being + released on the keyboard, the mouse moving over our window, + the mouse entering (or leaving) our window, and so on. + </p> + <ol> + <li class="subsubtitle"><a name="mousepressrelease">Mouse button press and release events</a> + <p> + The first event type we will deal with is a mouse + button-press (or button-release) event in our window. In + order to register to such an event type, we should add one + (or more) of the following masks when we create our window: + </p> + <ul> + <li><span class="code">XCB_EVENT_MASK_BUTTON_PRESS</span>: notify us + of any button that was pressed in one of our windows. + <li><span class="code">XCB_EVENT_MASK_BUTTON_RELEASE</span>: notify us + of any button that was released in one of our windows. + </ul> + <p> + The structure to be checked for in our events loop is the + same for these two events, and is the following: + </p> + <pre class="code"> +typedef struct { + uint8_t response_type; /* The type of the event, here it is xcb_button_press_event_t or xcb_button_release_event_t */ + xcb_button_t detail; + uint16_t sequence; + xcb_timestamp_t time; /* Time, in milliseconds the event took place in */ + xcb_window_t root; + xcb_window_t event; + xcb_window_t child; + int16_t root_x; + int16_t root_y; + int16_t event_x; /* The x coordinate where the mouse has been pressed in the window */ + int16_t event_y; /* The y coordinate where the mouse has been pressed in the window */ + uint16_t state; /* A mask of the buttons (or keys) during the event */ + uint8_t same_screen; +} xcb_button_press_event_t; + +typedef xcb_button_press_event_t xcb_button_release_event_t; +</pre> + <p> + The <span class="code">time</span> field may be used to calculate "double-click" + situations by an application (e.g. if the mouse button was + clicked two times in a duration shorter than a given amount + of time, assume this was a double click). + </p> + <p> + The <span class="code">state</span> field is a mask of the buttons held down during + the event. It is a bitwise OR of any of the following (from the xcb_button_mask_t and + xcb_mod_mask_t enumerations): + </p> + <ul> + <li><span class="code">XCB_BUTTON_MASK_1</span> + <li><span class="code">XCB_BUTTON_MASK_2</span> + <li><span class="code">XCB_BUTTON_MASK_3</span> + <li><span class="code">XCB_BUTTON_MASK_4</span> + <li><span class="code">XCB_BUTTON_MASK_5</span> + <li><span class="code">XCB_MOD_MASK_SHIFT</span> + <li><span class="code">XCB_MOD_MASK_LOCK</span> + <li><span class="code">XCB_MOD_MASK_CONTROL</span> + <li><span class="code">XCB_MOD_MASK_1</span> + <li><span class="code">XCB_MOD_MASK_2</span> + <li><span class="code">XCB_MOD_MASK_3</span> + <li><span class="code">XCB_MOD_MASK_4</span> + <li><span class="code">XCB_MOD_MASK_5</span> + </ul> + <p> + Their names are self explanatory, where the first 5 refer to + the mouse buttons that are being pressed, while the rest + refer to various "special keys" that are being pressed (Mod1 + is usually the 'Alt' key or the 'Meta' key). + </p> + <p> + <b>TODO:</b> Problem: it seems that the state does not + change when clicking with various buttons. + </p> + <li class="subsubtitle"><a name="mousemvnt">Mouse movement events</a> + <p> + Similar to mouse button press and release events, we also + can be notified of various mouse movement events. These can + be split into two families. One is of mouse pointer + movement while no buttons are pressed, and the second is a + mouse pointer motion while one (or more) of the buttons are + pressed (this is sometimes called "a mouse drag operation", + or just "dragging"). The following event masks may be added + during the creation of our window: + </p> + <ul> + <li><span class="code">XCB_EVENT_MASK_POINTER_MOTION</span>: events of + the pointer moving in one of the windows controlled by our + application, while no mouse button is held pressed. + <li><span class="code">XCB_EVENT_MASK_BUTTON_MOTION</span>: Events of + the pointer moving while one or more of the mouse buttons + is held pressed. + <li><span class="code">XCB_EVENT_MASK_BUTTON_1_MOTION</span>: same as + <span class="code">XCB_EVENT_MASK_BUTTON_MOTION</span>, but only when + the 1st mouse button is held pressed. + <li><span class="code">XCB_EVENT_MASK_BUTTON_2_MOTION</span>, + <span class="code">XCB_EVENT_MASK_BUTTON_3_MOTION</span>, + <span class="code">XCB_EVENT_MASK_BUTTON_4_MOTION</span>, + <span class="code">XCB_EVENT_MASK_BUTTON_5_MOTION</span>: same as + <span class="code">XCB_EVENT_MASK_BUTTON_1_MOTION</span>, but + respectively for 2nd, 3rd, 4th and 5th mouse button. + </ul> + <p> + The structure to be checked for in our events loop is the + same for these events, and is the following: + </p> + <pre class="code"> +typedef struct { + uint8_t response_type; /* The type of the event */ + uint8_t detail; + uint16_t sequence; + xcb_timestamp_t time; /* Time, in milliseconds the event took place in */ + xcb_window_t root; + xcb_window_t event; + xcb_window_t child; + int16_t root_x; + int16_t root_y; + int16_t event_x; /* The x coordinate of the mouse when the event was generated */ + int16_t event_y; /* The y coordinate of the mouse when the event was generated */ + uint16_t state; /* A mask of the buttons (or keys) during the event */ + uint8_t same_screen; +} xcb_motion_notify_event_t; +</pre> + <li class="subsubtitle"><a name="mouseenter">Mouse pointer enter and leave events</a> + <p> + Another type of event that applications might be interested + in, is a mouse pointer entering a window the program + controls, or leaving such a window. Some programs use these + events to show the user that the application is now in + focus. In order to register for such an event type, we + should add one (or more) of the following masks when we + create our window: + </p> + <ul> + <li><span class="code">xcb_event_enter_window_t</span>: notify us + when the mouse pointer enters any of our controlled + windows. + <li><span class="code">xcb_event_leave_window_t</span>: notify us + when the mouse pointer leaves any of our controlled + windows. + </ul> + <p> + The structure to be checked for in our events loop is the + same for these two events, and is the following: + </p> + <pre class="code"> +typedef struct { + uint8_t response_type; /* The type of the event */ + uint8_t detail; + uint16_t sequence; + xcb_timestamp_t time; /* Time, in milliseconds the event took place in */ + xcb_window_t root; + xcb_window_t event; + xcb_window_t child; + int16_t root_x; + int16_t root_y; + int16_t event_x; /* The x coordinate of the mouse when the event was generated */ + int16_t event_y; /* The y coordinate of the mouse when the event was generated */ + uint16_t state; /* A mask of the buttons (or keys) during the event */ + uint8_t mode; /* The number of mouse button that was clicked */ + uint8_t same_screen_focus; +} xcb_enter_notify_event_t; + +typedef xcb_enter_notify_event_t xcb_leave_notify_event_t; +</pre> + <li class="subsubtitle"><a name="focus">The keyboard focus</a> + <p> + There may be many windows on a screen, but only a single + keyboard attached to them. How does the X server then know + which window should be sent a given keyboard input ? This is + done using the keyboard focus. Only a single window on the + screen may have the keyboard focus at a given time. There + is a XCB function that allows a program to set the keyboard + focus to a given window. The user can usually set the + keyboard focus using the window manager (often by clicking + on the title bar of the desired window). Once our window + has the keyboard focus, every key press or key release will + cause an event to be sent to our program (if it regsitered + for these event types...). + </p> + <li class="subsubtitle"><a name="keypress">Keyboard press and release events</a> + <p> + If a window controlled by our program currently holds the + keyboard focus, it can receive key press and key release + events. So, we should add one (or more) of the following + masks when we create our window: + </p> + <ul> + <li><span class="code">XCB_EVENT_MASK_KEY_PRESS</span>: notify us when + a key was pressed while any of our controlled windows had + the keyboard focus. + <li><span class="code">XCB_EVENT_MASK_KEY_RELEASE</span>: notify us + when a key was released while any of our controlled + windows had the keyboard focus. + </ul> + <p> + The structure to be checked for in our events loop is the + same for these two events, and is the following: + </p> + <pre class="code"> +typedef struct { + uint8_t response_type; /* The type of the event */ + xcb_keycode_t detail; + uint16_t sequence; + xcb_timestamp_t time; /* Time, in milliseconds the event took place in */ + xcb_window_t root; + xcb_window_t event; + xcb_window_t child; + int16_t root_x; + int16_t root_y; + int16_t event_x; + int16_t event_y; + uint16_t state; + uint8_t same_screen; +} xcb_key_press_event_t; + +typedef xcb_key_press_event_t xcb_key_release_event_t; +</pre> + <p> + The <span class="code">detail</span> field refers to the + physical key on the keyboard. + </p> + <p> + <b>TODO:</b> Talk about getting the ASCII code from the key code. + </p> + </ol> + <li class="subtitle"><a name="eventex">X events: a complete example</a> + <p> + As an example for handling events, we show a program that + creates a window, enters an events loop and checks for all the + events described above, and writes on the terminal the relevant + characteristics of the event. With this code, it should be + easy to add drawing operations, like those which have been + described above. + </p> + <pre class="code"> +#include <stdlib.h> +#include <stdio.h> + +#include <xcb/xcb.h> + +void +print_modifiers (uint32_t mask) +{ + const char **mod, *mods[] = { + "Shift", "Lock", "Ctrl", "Alt", + "Mod2", "Mod3", "Mod4", "Mod5", + "Button1", "Button2", "Button3", "Button4", "Button5" + }; + printf ("Modifier mask: "); + for (mod = mods ; mask; mask >>= 1, mod++) + if (mask & 1) + printf(*mod); + putchar ('\n'); +} + +int +main () +{ + xcb_connection_t *c; + xcb_screen_t *screen; + xcb_window_t win; + xcb_generic_event_t *e; + uint32_t mask = 0; + uint32_t values[2]; + + /* Open the connection to the X server */ + c = xcb_connect (NULL, NULL); + + /* Get the first screen */ + screen = xcb_setup_roots_iterator (xcb_get_setup (c)).data; + + /* Ask for our window's Id */ + win = xcb_generate_id (c); + + /* Create the window */ + mask = XCB_CW_BACK_PIXEL | XCB_CW_EVENT_MASK; + values[0] = screen->white_pixel; + values[1] = XCB_EVENT_MASK_EXPOSURE | XCB_EVENT_MASK_BUTTON_PRESS | + XCB_EVENT_MASK_BUTTON_RELEASE | XCB_EVENT_MASK_POINTER_MOTION | + XCB_EVENT_MASK_ENTER_WINDOW | XCB_EVENT_MASK_LEAVE_WINDOW | + XCB_EVENT_MASK_KEY_PRESS | XCB_EVENT_MASK_KEY_RELEASE; + xcb_create_window (c, /* Connection */ + 0, /* depth */ + win, /* window Id */ + screen->root, /* parent window */ + 0, 0, /* x, y */ + 150, 150, /* width, height */ + 10, /* border_width */ + XCB_WINDOW_CLASS_INPUT_OUTPUT, /* class */ + screen->root_visual, /* visual */ + mask, values); /* masks */ + + /* Map the window on the screen */ + xcb_map_window (c, win); + + xcb_flush (c); + + while ((e = xcb_wait_for_event (c))) { + switch (e->response_type & ~0x80) { + case XCB_EXPOSE: { + xcb_expose_event_t *ev = (xcb_expose_event_t *)e; + + printf ("Window %ld exposed. Region to be redrawn at location (%d,%d), with dimension (%d,%d)\n", + ev->window, ev->x, ev->y, ev->width, ev->height); + break; + } + case XCB_BUTTON_PRESS: { + xcb_button_press_event_t *ev = (xcb_button_press_event_t *)e; + print_modifiers(ev->state); + + switch (ev->detail) { + case 4: + printf ("Wheel Button up in window %ld, at coordinates (%d,%d)\n", + ev->event, ev->event_x, ev->event_y); + break; + case 5: + printf ("Wheel Button down in window %ld, at coordinates (%d,%d)\n", + ev->event, ev->event_x, ev->event_y); + break; + default: + printf ("Button %d pressed in window %ld, at coordinates (%d,%d)\n", + ev->detail, ev->event, ev->event_x, ev->event_y); + } + break; + } + case XCB_BUTTON_RELEASE: { + xcb_button_release_event_t *ev = (xcb_button_release_event_t *)e; + print_modifiers(ev->state); + + printf ("Button %d released in window %ld, at coordinates (%d,%d)\n", + ev->detail, ev->event, ev->event_x, ev->event_y); + break; + } + case XCB_MOTION_NOTIFY: { + xcb_motion_notify_event_t *ev = (xcb_motion_notify_event_t *)e; + + printf ("Mouse moved in window %ld, at coordinates (%d,%d)\n", + ev->event, ev->event_x, ev->event_y); + break; + } + case XCB_ENTER_NOTIFY: { + xcb_enter_notify_event_t *ev = (xcb_enter_notify_event_t *)e; + + printf ("Mouse entered window %ld, at coordinates (%d,%d)\n", + ev->event, ev->event_x, ev->event_y); + break; + } + case XCB_LEAVE_NOTIFY: { + xcb_leave_notify_event_t *ev = (xcb_leave_notify_event_t *)e; + + printf ("Mouse left window %ld, at coordinates (%d,%d)\n", + ev->event, ev->event_x, ev->event_y); + break; + } + case XCB_KEY_PRESS: { + xcb_key_press_event_t *ev = (xcb_key_press_event_t *)e; + print_modifiers(ev->state); + + printf ("Key pressed in window %ld\n", + ev->event); + break; + } + case XCB_KEY_RELEASE: { + xcb_key_release_event_t *ev = (xcb_key_release_event_t *)e; + print_modifiers(ev->state); + + printf ("Key released in window %ld\n", + ev->event); + break; + } + default: + /* Unknown event type, ignore it */ + printf("Unknown event: %d\n", e->response_type); + break; + } + /* Free the Generic Event */ + free (e); + } + + return 0; +} +</pre> + </ol> + <li class="title"><a name="font">Handling text and fonts</a> + <p> + Besides drawing graphics on a window, we often want to draw + text. Text strings have two major properties: the characters to + be drawn and the font with which they are drawn. In order to + draw text, we need to first request the X server to load a + font. We then assign a font to a Graphic Context, and finally, we + draw the text in a window, using the Graphic Context. + </p> + <ol> + <li class="subtitle"><a name="fontstruct">The Font structure</a> + <p> + In order to support flexible fonts, a font type is + defined. You know what ? It's an Id: + </p> + <pre class="code"> +typedef uint32_t xcb_font_t; +</pre> + <p> + It is used to contain information about a font, and is passed + to several functions that handle fonts selection and text drawing. + We ask the X server to attribute an Id to our font with the + function: + </p> + <pre class="code"> +xcb_font_t xcb_generate_id (xcb_connection_t *c); +</pre> + <br> + <li class="subtitle"><a name="openingfont">Opening a Font</a> + <p> + To open a font, we use the following function: + </p> + <pre class="code"> +xcb_void_cookie_t xcb_open_font (xcb_connection_t *c, + xcb_font_t fid, + uint16_t name_len, + const char *name); +</pre> + <p> + The <span class="code">fid</span> parameter is the font Id + defined by <span class="code">xcb_generate_id()</span> (see + above). The <span class="code">name</span> parameter is the + name of the font you want to open. Use the command + <span class="code">xlsfonts</span> in a terminal to know which + are the fonts available on your computer. The parameter + <span class="code">name_len</span> is the length of the name + of the font (given by <span class="code">strlen()</span>). + </p> + <li class="subtitle"><a name="assigningfont">Assigning a Font to a Graphic Context</a> + <p> + Once a font is opened, you have to create a Graphic Context + that will contain the informations about the color of the + foreground and the background used when you draw a text in a + Drawable. Here is an exemple of a Graphic Context that will + allow us to draw an opened font with a black foreground and a + white background: + </p> + <pre class="code"> + /* + * c is the connection + * screen is the screen where the window is displayed + * window is the window in which we will draw the text + * font is the opened font + */ + + uint32_t value_list[3]; + xcb_gcontext_t gc; + uint32_t mask; + + gc = xcb_generate_id (c); + mask = XCB_GC_FOREGROUND | XCB_GC_BACKGROUND | XCB_GC_FONT; + value_list[0] = screen->black_pixel; + value_list[1] = screen->white_pixel; + value_list[2] = font; + xcb_create_gc (c, gc, window, mask, value_list); + + /* The font is not needed anymore, so we close it */ + xcb_close_font (c, font); +</pre> + <li class="subtitle"><a name="drawingtext">Drawing text in a drawable</a> + <p> + To draw a text in a drawable, we use the following function: + </p> + <pre class="code"> +xcb_void_cookie_t xcb_image_text_8 (xcb_connection_t *c, + uint8_t string_len, + xcb_drawable_t drawable, + xcb_gcontext_t gc, + int16_t x, + int16_t y, + const char *string); +</pre> + <p> + The <span class="code">string</span> parameter is the text to + draw. The location of the drawing is given by the parameters + <span class="code">x</span> and <span class="code">y</span>. + The base line of the text is exactly the parameter + <span class="code">y</span>. + </p> + <li class="subtitle"><a name="fontcompleteexample">Complete example</a> + <p> + This example draw a text at 10 pixels (for the base line) of + the bottom of a window. Pressing the Esc key exits the program. + </p> + <pre class="code"> +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include <xcb/xcb.h> + +#define WIDTH 300 +#define HEIGHT 100 + + + +static xcb_gc_t gc_font_get (xcb_connection_t *c, + xcb_screen_t *screen, + xcb_window_t window, + const char *font_name); + +static void text_draw (xcb_connection_t *c, + xcb_screen_t *screen, + xcb_window_t window, + int16_t x1, + int16_t y1, + const char *label); + +static void +text_draw (xcb_connection_t *c, + xcb_screen_t *screen, + xcb_window_t window, + int16_t x1, + int16_t y1, + const char *label) +{ + xcb_void_cookie_t cookie_gc; + xcb_void_cookie_t cookie_text; + xcb_generic_error_t *error; + xcb_gcontext_t gc; + uint8_t length; + + length = strlen (label); + + gc = gc_font_get(c, screen, window, "7x13"); + + cookie_text = xcb_image_text_8_checked (c, length, window, gc, + x1, + y1, label); + error = xcb_request_check (c, cookie_text); + if (error) { + fprintf (stderr, "ERROR: can't paste text : %d\n", error->error_code); + xcb_disconnect (c); + exit (-1); + } + + cookie_gc = xcb_free_gc (c, gc); + error = xcb_request_check (c, cookie_gc); + if (error) { + fprintf (stderr, "ERROR: can't free gc : %d\n", error->error_code); + xcb_disconnect (c); + exit (-1); + } +} + +static xcb_gc_t +gc_font_get (xcb_connection_t *c, + xcb_screen_t *screen, + xcb_window_t window, + const char *font_name) +{ + uint32_t value_list[3]; + xcb_void_cookie_t cookie_font; + xcb_void_cookie_t cookie_gc; + xcb_generic_error_t *error; + xcb_font_t font; + xcb_gcontext_t gc; + uint32_t mask; + + font = xcb_generate_id (c); + cookie_font = xcb_open_font_checked (c, font, + strlen (font_name), + font_name); + + error = xcb_request_check (c, cookie_font); + if (error) { + fprintf (stderr, "ERROR: can't open font : %d\n", error->error_code); + xcb_disconnect (c); + return -1; + } + + gc = xcb_generate_id (c); + mask = XCB_GC_FOREGROUND | XCB_GC_BACKGROUND | XCB_GC_FONT; + value_list[0] = screen->black_pixel; + value_list[1] = screen->white_pixel; + value_list[2] = font; + cookie_gc = xcb_create_gc_checked (c, gc, window, mask, value_list); + error = xcb_request_check (c, cookie_gc); + if (error) { + fprintf (stderr, "ERROR: can't create gc : %d\n", error->error_code); + xcb_disconnect (c); + exit (-1); + } + + cookie_font = xcb_close_font_checked (c, font); + error = xcb_request_check (c, cookie_font); + if (error) { + fprintf (stderr, "ERROR: can't close font : %d\n", error->error_code); + xcb_disconnect (c); + exit (-1); + } + + return gc; +} + +int main () +{ + xcb_screen_iterator_t screen_iter; + xcb_connection_t *c; + const xcb_setup_t *setup; + xcb_screen_t *screen; + xcb_generic_event_t *e; + xcb_generic_error_t *error; + xcb_void_cookie_t cookie_window; + xcb_void_cookie_t cookie_map; + xcb_window_t window; + uint32_t mask; + uint32_t values[2]; + int screen_number; + + /* getting the connection */ + c = xcb_connect (NULL, &screen_number); + if (!c) { + fprintf (stderr, "ERROR: can't connect to an X server\n"); + return -1; + } + + /* getting the current screen */ + setup = xcb_get_setup (c); + + screen = NULL; + screen_iter = xcb_setup_roots_iterator (setup); + for (; screen_iter.rem != 0; --screen_number, xcb_screen_next (&screen_iter)) + if (screen_number == 0) + { + screen = screen_iter.data; + break; + } + if (!screen) { + fprintf (stderr, "ERROR: can't get the current screen\n"); + xcb_disconnect (c); + return -1; + } + + /* creating the window */ + window = xcb_generate_id (c); + mask = XCB_CW_BACK_PIXEL | XCB_CW_EVENT_MASK; + values[0] = screen->white_pixel; + values[1] = + XCB_EVENT_MASK_KEY_RELEASE | + XCB_EVENT_MASK_BUTTON_PRESS | + XCB_EVENT_MASK_EXPOSURE | + XCB_EVENT_MASK_POINTER_MOTION; + cookie_window = xcb_create_window_checked (c, + screen->root_depth, + window, screen->root, + 20, 200, WIDTH, HEIGHT, + 0, XCB_WINDOW_CLASS_INPUT_OUTPUT, + screen->root_visual, + mask, values); + cookie_map = xcb_map_window_checked (c, window); + + /* error managing */ + error = xcb_request_check (c, cookie_window); + if (error) { + fprintf (stderr, "ERROR: can't create window : %d\n", error->error_code); + xcb_disconnect (c); + return -1; + } + error = xcb_request_check (c, cookie_map); + if (error) { + fprintf (stderr, "ERROR: can't map window : %d\n", error->error_code); + xcb_disconnect (c); + return -1; + } + + xcb_flush(c); + + while (1) { + e = xcb_poll_for_event(c); + if (e) { + switch (e->response_type & ~0x80) { + case XCB_EXPOSE: { + char *text; + + text = "Press ESC key to exit..."; + text_draw (c, screen, window, 10, HEIGHT - 10, text); + break; + } + case XCB_KEY_RELEASE: { + xcb_key_release_event_t *ev; + + ev = (xcb_key_release_event_t *)e; + + switch (ev->detail) { + /* ESC */ + case 9: + free (e); + xcb_disconnect (c); + return 0; + } + } + } + free (e); + } + } + + return 0; +} +</pre> + </ol> + <li class="title"><a name="wm">Interacting with the window manager</a> + <p> + After we have seen how to create windows and draw on them, we + take one step back, and look at how our windows are interacting + with their environment (the full screen and the other + windows). First of all, our application needs to interact with + the window manager. The window manager is responsible to + decorating drawn windows (i.e. adding a frame, an iconify + button, a system menu, a title bar, etc), as well as handling + icons shown when windows are being iconified. It also handles + ordering of windows on the screen, and other administrative + tasks. We need to give it various hints as to how we want it to + treat our application's windows. + </p> + <ol> + <li class="subtitle"><a name="wmprop">Window properties</a> + <p> + Many of the parameters communicated to the window manager are + passed using data called "properties". These properties are + attached by the X server to different windows, and are stored + in a format that makes it possible to read them from different + machines that may use different architectures (remember that + an X client program may run on a remote machine). + </p> + <p> + The property and its type (a string, an integer, etc) are + Id. Their type are <span class="code">xcb_atom_t</span>: + </p> + <pre class="code"> +typedef uint32_t xcb_atom_t; +</pre> + <p> + To change the property of a window, we use the following + function: + </p> + <pre class="code"> +xcb_void_cookie_t xcb_change_property (xcb_connection_t *c, /* Connection to the X server */ + uint8_t mode, /* Property mode */ + xcb_window_t window, /* Window */ + xcb_atom_t property, /* Property to change */ + xcb_atom_t type, /* Type of the property */ + uint8_t format, /* Format of the property (8, 16, 32) */ + uint32_t data_len, /* Length of the data parameter */ + const void *data); /* Data */ +</pre> + <p> + The <span class="code">mode</span> parameter coud be one of + the following values (defined in enumeration xcb_prop_mode_t in + the xproto.h header file): + </p> + <ul> + <li>XCB_PROP_MODE_REPLACE + <li>XCB_PROP_MODE_PREPEND + <li>XCB_PROP_MODE_APPEND + </ul> + <br> + <li class="subtitle"><a name="wmname">Setting the window name and icon name</a> + <p> + The first thing we want to do would be to set the name for our + window. This is done using the + <span class="code">xcb_change_property()</span> function. This + name may be used by the window manager as the title of the + window (in the title bar), in a task list, etc. The property + atom to use to set the name of a window is + <span class="code">WM_NAME</span> (and + <span class="code">WM_ICON_NAME</span> for the iconified + window) and its type is <span class="code">STRING</span>. Here + is an example of utilization: + </p> + <pre class="code"> +#include <string.h> + +#include <xcb/xcb.h> +#include <xcb/xcb_atom.h> + +int +main () +{ + xcb_connection_t *c; + xcb_screen_t *screen; + xcb_window_t win; + char *title = "Hello World !"; + char *title_icon = "Hello World ! (iconified)"; + + + + /* Open the connection to the X server */ + c = xcb_connect (NULL, NULL); + + /* Get the first screen */ + screen = xcb_setup_roots_iterator (xcb_get_setup (c)).data; + + /* Ask for our window's Id */ + win = xcb_generate_id (c); + + /* Create the window */ + xcb_create_window (c, /* Connection */ + 0, /* depth */ + win, /* window Id */ + screen->root, /* parent window */ + 0, 0, /* x, y */ + 250, 150, /* width, height */ + 10, /* border_width */ + XCB_WINDOW_CLASS_INPUT_OUTPUT, /* class */ + screen->root_visual, /* visual */ + 0, NULL); /* masks, not used */ + + /* Set the title of the window */ + xcb_change_property (c, XCB_PROP_MODE_REPLACE, win, + WM_NAME, STRING, 8, + strlen (title), title); + + /* Set the title of the window icon */ + xcb_change_property (c, XCB_PROP_MODE_REPLACE, win, + WM_ICON_NAME, STRING, 8, + strlen(title_icon), title_icon); + + /* Map the window on the screen */ + xcb_map_window (c, win); + + xcb_flush (c); + + while (1) {} + + return 0; +} +</pre> + <div class="emph"> + <p>Note: the use of the atoms needs our program to be compiled + and linked against xcb_atom, so that we have to use + </p> + </div> + <pre class="text"> +gcc prog.c -o prog `pkg-config --cflags --libs xcb_atom` +</pre> + <div class="emph"> + <p> + for the program to compile fine. + </p> + </div> + </ol> + <li class="title"><a name="winop">Simple window operations</a> + <p> + One more thing we can do to our window is manipulate them on the + screen (resize them, move them, raise or lower them, iconify + them, and so on). Some window operations functions are supplied + by XCB for this purpose. + </p> + <ol> + <li class="subtitle"><a name="winmap">Mapping and un-mapping a window</a> + <p> + The first pair of operations we can apply on a window is + mapping it, or un-mapping it. Mapping a window causes the + window to appear on the screen, as we have seen in our simple + window program example. Un-mapping it causes it to be removed + from the screen (although the window as a logical entity still + exists). This gives the effect of making a window hidden + (unmapped) and shown again (mapped). For example, if we have a + dialog box window in our program, instead of creating it every + time the user asks to open it, we can create the window once, + in an un-mapped mode, and when the user asks to open it, we + simply map the window on the screen. When the user clicked the + 'OK' or 'Cancel' button, we simply un-map the window. This is + much faster than creating and destroying the window, however, + the cost is wasted resources, both on the client side, and on + the X server side. + </p> + <p> + To map a window, you use the following function: + </p> + <pre class="code"> +xcb_void_cookie_t xcb_map_window (xcb_connection_t *c, + xcb_window_t window); +</pre> + <p> + To have a simple example, see the <a href="#helloworld">example</a> + above. The mapping operation will cause an + <span class="code">Expose</span> event to be sent to our + application, unless the window is completely covered by other + windows. + </p> + <p> + Un-mapping a window is also simple. You use the function + </p> + <pre class="code"> +xcb_void_cookie_t xcb_unmap_window (xcb_connection_t *c, + xcb_window_t window); +</pre> + <p> + The utilization of this function is the same as + <span class="code">xcb_map_window()</span>. + </p> + <li class="subtitle"><a name="winconf">Configuring a window</a> + <p> + As we have seen when we have created our first window, in the + X Events subsection, we can set some attributes for the window + (that is, the position, the size, the events the window will + receive, etc). If we want to modify them, but the window is + already created, we can change them by using the following + function: + </p> + <pre class="code"> +xcb_void_cookie_t xcb_configure_window (xcb_connection_t *c, /* The connection to the X server*/ + xcb_window_t window, /* The window to configure */ + uint16_t value_mask, /* The mask */ + const uint32_t *value_list); /* The values to set */ +</pre> + <p> + We set the <span class="code">value_mask</span> to one or + several mask values that are in the xcb_config_window_t enumeration in the xproto.h header: + </p> + <ul> + <li><span class="code">XCB_CONFIG_WINDOW_X</span>: new x coordinate of the window's top left corner + <li><span class="code">XCB_CONFIG_WINDOW_Y</span>: new y coordinate of the window's top left corner + <li><span class="code">XCB_CONFIG_WINDOW_WIDTH</span>: new width of the window + <li><span class="code">XCB_CONFIG_WINDOW_HEIGHT</span>: new height of the window + <li><span class="code">XCB_CONFIG_WINDOW_BORDER_WIDTH</span>: new width of the border of the window + <li><span class="code">XCB_CONFIG_WINDOW_SIBLING</span> + <li><span class="code">XCB_CONFIG_WINDOW_STACK_MODE</span>: the new stacking order + </ul> + <p> + We then give to <span class="code">value_mask</span> the new + value. We now describe how to use + <span class="code">xcb_configure_window_t</span> in some useful + situations. + </p> + <li class="subtitle"><a name="winmove">Moving a window around the screen</a> + <p> + An operation we might want to do with windows is to move them + to a different location. This can be done like this: + </p> + <pre class="code"> +const static uint32_t values[] = { 10, 20 }; + +/* The connection c and the window win are supposed to be defined */ + +/* Move the window to coordinates x = 10 and y = 20 */ +xcb_configure_window (c, win, XCB_CONFIG_WINDOW_X | XCB_CONFIG_WINDOW_Y, values); +</pre> + <p> + Note that when the window is moved, it might get partially + exposed or partially hidden by other windows, and thus we + might get <span class="code">Expose</span> events due to this + operation. + </p> + <li class="subtitle"><a name="winsize">Resizing a window</a> + <p> + Yet another operation we can do is to change the size of a + window. This is done using the following code: + </p> + <pre class="code"> +const static uint32_t values[] = { 200, 300 }; + +/* The connection c and the window win are supposed to be defined */ + +/* Resize the window to width = 10 and height = 20 */ +xcb_configure_window (c, win, XCB_CONFIG_WINDOW_WIDTH | XCB_CONFIG_WINDOW_HEIGHT, values); +</pre> + <p> + We can also combine the move and resize operations using one + single call to <span class="code">xcb_configure_window_t</span>: + </p> + <pre class="code"> +const static uint32_t values[] = { 10, 20, 200, 300 }; + +/* The connection c and the window win are supposed to be defined */ + +/* Move the window to coordinates x = 10 and y = 20 */ +/* and resize the window to width = 10 and height = 20 */ +xcb_configure_window (c, win, XCB_CONFIG_WINDOW_X | XCB_CONFIG_WINDOW_Y | XCB_CONFIG_WINDOW_WIDTH | XCB_CONFIG_WINDOW_HEIGHT, values); +</pre> + <li class="subtitle"><a name="winstack">Changing windows stacking order: raise and lower</a> + <p> + Until now, we changed properties of a single window. We'll see + that there are properties that relate to the window and other + windows. One of them is the stacking order. That is, the order + in which the windows are layered on top of each other. The + front-most window is said to be on the top of the stack, while + the back-most window is at the bottom of the stack. Here is + how to manipulate our windows stack order: + </p> + <pre class="code"> +const static uint32_t values[] = { XCB_STACK_MODE_ABOVE }; + +/* The connection c and the window win are supposed to be defined */ + +/* Move the window on the top of the stack */ +xcb_configure_window (c, win, XCB_CONFIG_WINDOW_STACK_MODE, values); +</pre> + <pre class="code"> +const static uint32_t values[] = { XCB_STACK_MODE_BELOW }; + +/* The connection c and the window win are supposed to be defined */ + +/* Move the window on the bottom of the stack */ +xcb_configure_window (c, win, XCB_CONFIG_WINDOW_STACK_MODE, values); +</pre> + <li class="subtitle"><a name="wingetinfo">Getting information about a window</a> + <p> + Just like we can set various attributes of our windows, we can + also ask the X server supply the current values of these + attributes. For example, we can check where a window is + located on the screen, what is its current size, whether it is + mapped or not, etc. The structure that contains some of this + information is + </p> + <pre class="code"> +typedef struct { + uint8_t response_type; + uint8_t depth; /* depth of the window */ + uint16_t sequence; + uint32_t length; + xcb_window_t root; /* Id of the root window *> + int16_t x; /* X coordinate of the window's location */ + int16_t y; /* Y coordinate of the window's location */ + uint16_t width; /* Width of the window */ + uint16_t height; /* Height of the window */ + uint16_t border_width; /* Width of the window's border */ +} xcb_get_geometry_reply_t; +</pre> + <p> + XCB fill this structure with two functions: + </p> + <pre class="code"> +xcb_get_geometry_cookie_t xcb_get_geometry (xcb_connection_t *c, + xcb_drawable_t drawable); +xcb_get_geometry_reply_t *xcb_get_geometry_reply (xcb_connection_t *c, + xcb_get_geometry_cookie_t cookie, + xcb_generic_error_t **e); +</pre> + <p> + You use them as follows: + </p> + <pre class="code"> + xcb_connection_t *c; + xcb_drawable_t win; + xcb_get_geometry_reply_t *geom; + + /* You initialize c and win */ + + geom = xcb_get_geometry_reply (c, xcb_get_geometry (c, win), NULL); + + /* Do something with the fields of geom */ + + free (geom); +</pre> + <p> + Remark that you have to free the structure, as + <span class="code">xcb_get_geometry_reply_t</span> allocates a + newly one. + </p> + <p> + One problem is that the returned location of the window is + relative to its parent window. This makes these coordinates + rather useless for any window manipulation functions, like + moving it on the screen. In order to overcome this problem, we + need to take a two-step operation. First, we find out the Id + of the parent window of our window. We then translate the + above relative coordinates to the screen coordinates. + </p> + <p> + To get the Id of the parent window, we need this structure: + </p> + <pre class="code"> +typedef struct { + uint8_t response_type; + uint8_t pad0; + uint16_t sequence; + uint32_t length; + xcb_window_t root; + xcb_window_t parent; /* Id of the parent window */ + uint16_t children_len; + uint8_t pad1[14]; +} xcb_query_tree_reply_t; +</pre> + <p> + To fill this structure, we use these two functions: + </p> + <pre class="code"> +xcb_query_tree_cookie_t xcb_query_tree (xcb_connection_t *c, + xcb_window_t window); +xcb_query_tree_reply_t *xcb_query_tree_reply (xcb_connection_t *c, + xcb_query_tree_cookie_t cookie, + xcb_generic_error_t **e); +</pre> + <p> + The translated coordinates will be found in this structure: + </p> + <pre class="code"> +typedef struct { + uint8_t response_type; + uint8_t same_screen; + uint16_t sequence; + uint32_t length; + xcb_window_t child; + uint16_t dst_x; /* Translated x coordinate */ + uint16_t dst_y; /* Translated y coordinate */ +} xcb_translate_coordinates_reply_t; +</pre> + <p> + As usual, we need two functions to fill this structure: + </p> + <pre class="code"> +xcb_translate_coordinates_cookie_t xcb_translate_coordinates (xcb_connection_t *c, + xcb_window_t src_window, + xcb_window_t dst_window, + int16_t src_x, + int16_t src_y); +xcb_translate_coordinates_reply_t *xcb_translate_coordinates_reply (xcb_connection_t *c, + xcb_translate_coordinates_cookie_t cookie, + xcb_generic_error_t **e); +</pre> + <p> + We use them as follows: + </p> + <pre class="code"> + xcb_connection_t *c; + xcb_drawable_t win; + xcb_get_geometry_reply_t *geom; + xcb_query_tree_reply_t *tree; + xcb_translate_coordinates_reply_t *trans; + + /* You initialize c and win */ + + geom = xcb_get_geometry_reply (c, xcb_get_geometry (c, win), NULL); + if (!geom) + return 0; + + tree = xcb_query_tree_reply (c, xcb_query_tree (c, win), NULL); + if (!tree) + return 0; + + trans = xcb_translate_coordinates_reply (c, + xcb_translate_coordinates (c, + win, + tree->parent, + geom->x, geom->y), + NULL); + if (!trans) + return 0; + + /* the translated coordinates are in trans->dst_x and trans->dst_y */ + + free (trans); + free (tree); + free (geom); +</pre> + <p> + Of course, as for <span class="code">geom</span>, + <span class="code">tree</span> and + <span class="code">trans</span> have to be freed. + </p> + <p> + The work is a bit hard, but XCB is a very low-level library. + </p> + <p> + <b>TODO:</b> the utilization of these functions should be a + prog, which displays the coordinates of the window. + </p> + <p> + There is another structure that gives informations about our window: + </p> + <pre class="code"> +typedef struct { + uint8_t response_type; + uint8_t backing_store; + uint16_t sequence; + uint32_t length; + xcb_visualid_t visual; /* Visual of the window */ + uint16_t _class; + uint8_t bit_gravity; + uint8_t win_gravity; + uint32_t backing_planes; + uint32_t backing_pixel; + uint8_t save_under; + uint8_t map_is_installed; + uint8_t map_state; /* Map state of the window */ + uint8_t override_redirect; + xcb_colormap_t colormap; /* Colormap of the window */ + uint32_t all_event_masks; + uint32_t your_event_mask; + uint16_t do_not_propagate_mask; +} xcb_get_window_attributes_reply_t; +</pre> + <p> + XCB supplies these two functions to fill it: + </p> + <pre class="code"> +xcb_get_window_attributes_cookie_t xcb_get_window_attributes (xcb_connection_t *c, + xcb_window_t window); +xcb_get_window_attributes_reply_t *xcb_get_window_attributes_reply (xcb_connection_t *c, + xcb_get_window_attributes_cookie_t cookie, + xcb_generic_error_t **e); +</pre> + <p> + You use them as follows: + </p> + <pre class="code"> + xcb_connection_t *c; + xcb_drawable_t win; + xcb_get_window_attributes_reply_t *attr; + + /* You initialize c and win */ + + attr = xcb_get_window_attributes_reply (c, xcb_get_window_attributes (c, win), NULL); + + if (!attr) + return 0; + + /* Do something with the fields of attr */ + + free (attr); +</pre> + <p> + As for <span class="code">geom</span>, + <span class="code">attr</span> has to be freed. + </p> + </ol> + <li class="title"><a name="usecolor">Using colors to paint the rainbow</a> + <p> + Up until now, all our painting operation were done using black + and white. We will (finally) see now how to draw using colors. + </p> + <ol> + <li class="subtitle"><a name="colormap">Color maps</a> + <p> + In the beginning, there were not enough colors. Screen + controllers could only support a limited number of colors + simultaneously (initially 2, then 4, 16 and 256). Because of + this, an application could not just ask to draw in a "light + purple-red" color, and expect that color to be available. Each + application allocated the colors it needed, and when all the + color entries (4, 16, 256 colors) were in use, the next color + allocation would fail. + </p> + <p> + Thus, the notion of "a color map" was introduced. A color map + is a table whose size is the same as the number of + simultaneous colors a given screen controller. Each entry + contained the RGB (Red, Green and Blue) values of a different + color (all colors can be drawn using some combination of red, + green and blue). When an application wants to draw on the + screen, it does not specify which color to use. Rather, it + specifies which color entry of some color map to be used + during this drawing. Change the value in this color map entry + and the drawing will use a different color. + </p> + <p> + In order to be able to draw using colors that got something to + do with what the programmer intended, color map allocation + functions are supplied. You could ask to allocate entry for a + color with a set of RGB values. If one already existed, you + would get its index in the table. If none existed, and the + table was not full, a new cell would be allocated to contain + the given RGB values, and its index returned. If the table was + full, the procedure would fail. You could then ask to get a + color map entry with a color that is closest to the one you + were asking for. This would mean that the actual drawing on + the screen would be done using colors similar to what you + wanted, but not the same. + </p> + <p> + On today's more modern screens where one runs an X server with + support for 16 million colors, this limitation looks a little + silly, but remember that there are still older computers with + older graphics cards out there. Using color map, support for + these screen becomes transparent to you. On a display + supporting 16 million colors, any color entry allocation + request would succeed. On a display supporting a limited + number of colors, some color allocation requests would return + similar colors. It won't look as good, but your application + would still work. + </p> + <li class="subtitle"><a name="colormapalloc">Allocating and freeing Color Maps</a> + <p> + When you draw using XCB, you can choose to use the standard + color map of the screen your window is displayed on, or you + can allocate a new color map and apply it to a window. In the + latter case, each time the mouse moves onto your window, the + screen color map will be replaced by your window's color map, + and you'll see all the other windows on screen change their + colors into something quite bizzare. In fact, this is the + effect you get with X applications that use the "-install" + command line option. + </p> + <p> + In XCB, a color map is (as often in X) an Id: + </p> + <pre class="code"> +typedef uint32_t xcb_colormap_t; +</pre> + <p> + In order to access the screen's default color map, you just + have to retrieve the <span class="code">default_colormap</span> + field of the <span class="code">xcb_screen_t</span> structure + (see Section + <a href="#screen">Checking basic information about a connection</a>): + </p> + <pre class="code"> +#include <stdio.h> + +#include <xcb/xcb.h> + +int +main () +{ + xcb_connection_t *c; + xcb_screen_t *screen; + xcb_colormap_t colormap; + + /* Open the connection to the X server and get the first screen */ + c = xcb_connect (NULL, NULL); + screen = xcb_setup_roots_iterator (xcb_get_setup (c)).data; + + colormap = screen->default_colormap; + + return 0; +} +</pre> + <p> + This will return the color map used by default on the first + screen (again, remember that an X server may support several + different screens, each of which might have its own resources). + </p> + <p> + The other option, that of allocating a new colormap, works as + follows. We first ask the X server to give an Id to our color + map, with this function: + </p> + <pre class="code"> +xcb_colormap_t xcb_generate_id (xcb_connection_t *c); +</pre> + <p> + Then, we create the color map with + </p> + <pre class="code"> +xcb_void_cookie_t xcb_create_colormap (xcb_connection_t *c, /* Pointer to the xcb_connection_t structure */ + uint8_t alloc, /* Colormap entries to be allocated (AllocNone or AllocAll) */ + xcb_colormap_t mid, /* Id of the color map */ + xcb_window_t window, /* Window on whose screen the colormap will be created */ + xcb_visualid_t visual); /* Id of the visual supported by the screen */ +</pre> + <p> + Here is an example of creation of a new color map: + </p> + <pre class="code"> +#include <xcb/xcb.h> + +int +main () +{ + xcb_connection_t *c; + xcb_screen_t *screen; + xcb_window_t win; + xcb_colormap_t cmap + + /* Open the connection to the X server and get the first screen */ + c = xcb_connect (NULL, NULL); + screen = xcb_setup_roots_iterator (xcb_get_setup (c)).data; + + /* We create the window win here*/ + + cmap = xcb_generate_id (c); + xcb_create_colormap (c, XCB_COLORMAP_ALLOC_NONE, cmap, win, screen->root_visual); + + return 0; +} +</pre> + <p> + Note that the window parameter is only used to allow the X + server to create the color map for the given screen. We can + then use this color map for any window drawn on the same screen. + </p> + <p> + To free a color map, it suffices to use this function: + </p> + <pre class="code"> +xcb_void_cookie_t xcb_free_colormap (xcb_connection_t *c, /* The connection */ + xcb_colormap_t cmap); /* The color map */ +</pre> + <div class="comp"> + <div class="title"> + Comparison Xlib/XCB + </div> + <div class="xlib"> + <ul> + <li>XCreateColormap () + </ul> + </div> + <div class="xcb"> + <ul> + <li>xcb_generate_id () + <li>xcb_create_colormap () + </ul> + </div> + <div class="xlib"> + <ul> + <li>XFreeColormap () + </ul> + </div> + <div class="xcb"> + <ul> + <li>xcb_free_colormap () + </ul> + </div> + </div> + <br> + <li class="subtitle"><a name="alloccolor">Allocating and freeing a color entry</a> + <p> + Once we got access to some color map, we can start allocating + colors. The informations related to a color are stored in the + following structure: + </p> + <pre class="code"> +typedef struct { + uint8_t response_type; + uint8_t pad0; + uint16_t sequence; + uint32_t length; + uint16_t red; /* The red component */ + uint16_t green; /* The green component */ + uint16_t blue; /* The blue component */ + uint8_t pad1[2]; + uint32_t pixel; /* The entry in the color map, supplied by the X server */ +} xcb_alloc_color_reply_t; +</pre> + <p> + XCB supplies these two functions to fill it: + </p> + <pre class="code"> +xcb_alloc_color_cookie_t xcb_alloc_color (xcb_connection_t *c, + xcb_colormap_t cmap, + uint16_t red, + uint16_t green, + uint16_t blue); +xcb_alloc_color_reply_t *xcb_alloc_color_reply (xcb_connection_t *c, + xcb_alloc_color_cookie_t cookie, + xcb_generic_error_t **e); +</pre> + <p> + The fuction <span class="code">xcb_alloc_color()</span> takes the + 3 RGB components as parameters (red, green and blue). Here is an + example of using these functions: + </p> + <pre class="code"> +#include <malloc.h> + +#include <xcb/xcb.h> + +int +main () +{ + xcb_connection_t *c; + xcb_screen_t *screen; + xcb_window_t win; + xcb_colormap_t cmap; + xcb_alloc_color_reply_t *rep; + + /* Open the connection to the X server and get the first screen */ + c = xcb_connect (NULL, NULL); + screen = xcb_setup_roots_iterator (xcb_get_setup (c)).data; + + /* We create the window win here*/ + + cmap = xcb_generate_id (c); + xcb_create_colormap (c, XCB_COLORMAP_ALLOC_NONE, cmap, win, screen->root_visual); + + rep = xcb_alloc_color_reply (c, xcb_alloc_color (c, cmap, 65535, 0, 0), NULL); + + if (!rep) + return 0; + + /* Do something with r->pixel or the components */ + + free (rep); + + return 0; +} +</pre> + <p> + As <span class="code">xcb_alloc_color_reply()</span> allocates + memory, you have to free <span class="code">rep</span>. + </p> + <p> + <b>TODO</b>: Talk about freeing colors. + </p> + </ol> + <li class="title"><a name="pixmaps">X Bitmaps and Pixmaps</a> + <p> + One thing many so-called "Multi-Media" applications need to do, + is display images. In the X world, this is done using bitmaps + and pixmaps. We have already seen some usage of them when + setting an icon for our application. Lets study them further, + and see how to draw these images inside a window, along side the + simple graphics and text we have seen so far. + </p> + <p> + One thing to note before delving further, is that XCB (nor Xlib) + supplies no means of manipulating popular image formats, such as + gif, png, jpeg or tiff. It is up to the programmer (or to higher + level graphics libraries) to translate these image formats into + formats that the X server is familiar with (x bitmaps and x + pixmaps). + </p> + <ol> + <li class="subtitle"><a name="pixmapswhat">What is a X Bitmap? An X Pixmap?</a> + <p> + An X bitmap is a two-color image stored in a format specific + to the X window system. When stored in a file, the bitmap data + looks like a C source file. It contains variables defining the + width and the height of the bitmap, an array containing the + bit values of the bitmap (the size of the array is + (width+7)/8*height and the bit and byte order are LSB), and + an optional hot-spot location (that will + be explained later, when discussing mouse cursors). + </p> + <p> + An X pixmap is a format used to stored images in the memory of + an X server. This format can store both black and white images + (such as x bitmaps) as well as color images. It is the only + image format supported by the X protocol, and any image to be + drawn on screen, should be first translated into this format. + </p> + <p> + In actuality, an X pixmap can be thought of as a window that + does not appear on the screen. Many graphics operations that + work on windows, will also work on pixmaps. Indeed, the type + of X pixmap in XCB is an Id like a window: + </p> + <pre class="code"> +typedef uint32_t xcb_pixmap_t; +</pre> + <p> + Like Xlib, there is no difference between a Drawable, a Window + or a Pixmap: + </p> + <pre class="code"> +typedef uint32_t xcb_drawable_t; +</pre> + <p> + in order to avoid confusion between a window and a pixmap. The + operations that will work the same on a window or a pixmap + will require a <span class="code">xcb_drawable_t</span> + </p> + <div class="emph"> + <p> + Remark: In Xlib, there is no specific difference between a + <span class="code">Drawable</span>, a + <span class="code">Pixmap</span> or a + <span class="code">Window</span>: all are 32 bit long + integer. XCB wraps all these different IDs in structures to + provide some measure of type-safety. + </p> + </div> + <li class="subtitle"><a name="pixmapscreate">Creating a pixmap</a> + <p> + Sometimes we want to create an un-initialized pixmap, so we + can later draw into it. This is useful for image drawing + programs (creating a new empty canvas will cause the creation + of a new pixmap on which the drawing can be stored). It is + also useful when reading various image formats: we load the + image data into memory, create a pixmap on the server, and + then draw the decoded image data onto that pixmap. + </p> + <p> + To create a new pixmap, we first ask the X server to give an + Id to our pixmap, with this function: + </p> + <pre class="code"> +xcb_pixmap_t xcb_generate_id (xcb_connection_t *c); +</pre> + <p> + Then, XCB supplies the following function to create new pixmaps: + </p> + <pre class="code"> +xcb_void_cookie_t xcb_create_pixmap (xcb_connection_t *c, /* Pointer to the xcb_connection_t structure */ + uint8_t depth, /* Depth of the screen */ + xcb_pixmap_t pid, /* Id of the pixmap */ + xcb_drawable_t drawable, + uint16_t width, /* Width of the window (in pixels) */ + uint16_t height); /* Height of the window (in pixels) */ +</pre> + <p> + <b>TODO</b>: Explain the drawable parameter, and give an + example (like <a href="xpoints.c">xpoints.c</a>) + </p> + <li class="subtitle"><a name="pixmapsdraw"></a>Drawing a pixmap in a window + <p> + Once we got a handle to a pixmap, we can draw it on some + window, using the following function: + </p> + <pre class="code"> +xcb_void_cookie_t xcb_copy_area (xcb_connection_t *c, /* Pointer to the xcb_connection_t structure */ + xcb_drawable_t src_drawable, /* The Drawable we want to paste */ + xcb_drawable_t dst_drawable, /* The Drawable on which we copy the previous Drawable */ + xcb_gcontext_t gc, /* A Graphic Context */ + int16_t src_x, /* Top left x coordinate of the region we want to copy */ + int16_t src_y, /* Top left y coordinate of the region we want to copy */ + int16_t dst_x, /* Top left x coordinate of the region where we want to copy */ + int16_t dst_y, /* Top left y coordinate of the region where we want to copy */ + uint16_t width, /* Width of the region we want to copy */ + uint16_t height); /* Height of the region we want to copy */ +</pre> + <p> + As you can see, we could copy the whole pixmap, as well as + only a given rectangle of the pixmap. This is useful to + optimize the drawing speed: we could copy only what we have + modified in the pixmap. + </p> + <p> + <b>One important note should be made</b>: it is possible to + create pixmaps with different depths on the same screen. When + we perform copy operations (a pixmap onto a window, etc), we + should make sure that both source and target have the same + depth. If they have a different depth, the operation would + fail. The exception to this is if we copy a specific bit plane + of the source pixmap using the + <span class="code">xcb_copy_plane_t</span> function. In such an + event, we can copy a specific plane to the target window (in + actuality, setting a specific bit in the color of each pixel + copied). This can be used to generate strange graphic effects + in a window, but that is beyond the scope of this tutorial. + </p> + <li class="subtitle"><a name="pixmapsfree"></a>Freeing a pixmap + <p> + Finally, when we are done using a given pixmap, we should free + it, in order to free resources of the X server. This is done + using this function: + </p> + <pre class="code"> +xcb_void_cookie_t xcb_free_pixmap (xcb_connection_t *c, /* Pointer to the xcb_connection_t structure */ + xcb_pixmap_t pixmap); /* A given pixmap */ +</pre> + <p> + Of course, after having freed it, we must not try accessing + the pixmap again. + </p> + <p> + <b>TODO</b>: Give an example, or a link to xpoints.c + </p> + </ol> + <li class="title"><a name="mousecursor">Messing with the mouse cursor</a> + <p> + It it possible to modify the shape of the mouse pointer (also + called the X pointer) when in certain states, as we otfen see in + programs. For example, a busy application would often display + the sand clock over its main window, to give the user a visual + hint that he should wait. Let's see how we can change the mouse + cursor of our windows. + </p> + <ol> + <li class="subtitle"><a name="mousecursorcreate">Creating and destroying a mouse cursor</a> + <p> + There are two methods for creating cursors. One of them is by + using a set of predefined cursors, that are supplied by the X + server, the other is by using a user-supplied bitmap. + </p> + <p> + In the first method, we use a special font named "cursor", and + the function <span class="code">xcb_create_glyph_cursor</span>: + </p> + <pre class="code"> +xcb_void_cookie_t xcb_create_glyph_cursor (xcb_connection_t *c, + xcb_cursor_t cid, + xcb_font_t source_font, /* font for the source glyph */ + xcb_font_t mask_font, /* font for the mask glyph or XCB_NONE */ + uint16_t source_char, /* character glyph for the source */ + uint16_t mask_char, /* character glyph for the mask */ + uint16_t fore_red, /* red value for the foreground of the source */ + uint16_t fore_green, /* green value for the foreground of the source */ + uint16_t fore_blue, /* blue value for the foreground of the source */ + uint16_t back_red, /* red value for the background of the source */ + uint16_t back_green, /* green value for the background of the source */ + uint16_t back_blue) /* blue value for the background of the source */ +</pre> + <p> + <b>TODO</b>: Describe <span class="code">source_char</span> + and <span class="code">mask_char</span>, for example by giving + an example on how to get the values. There is a list there: + <a href="http://tronche.com/gui/x/xlib/appendix/b/">X Font Cursors</a> + </p> + <p> + So we first open that font (see <a href="#loadfont">Loading a Font</a>) + and create the new cursor. As for every X ressource, we have to + ask for an X id with <span class="code">xcb_generate_id</span> + first: + </p> + <pre class="code"> +xcb_font_t font; +xcb_cursor_t cursor; + +/* The connection is set */ + +font = xcb_generate_id (conn); +xcb_open_font (conn, font, strlen ("cursor"), "cursor"); + +cursor = xcb_generate_id (conn); +xcb_create_glyph_cursor (conn, cursor, font, font, + 58, 58 + 1, + 0, 0, 0, + 0, 0, 0); +</pre> + <p> + We have created the cursor "right hand" by specifying 58 to + the <span class="code">source_fon</span>t argument and 58 + 1 + to the <span class="code">mask_font</span>. + </p> + <p> + The cursor is destroyed by using the function + </p> + <pre class="code"> +xcb_void_cookie_t xcb_free_cursor (xcb_connection_t *c, + xcb_cursor_t cursor); +</pre> + <p> + In the second method, we create a new cursor by using a pair + of pixmaps, with depth of one (that is, two colors + pixmaps). One pixmap defines the shape of the cursor, while + the other works as a mask, specifying which pixels of the + cursor will be actually drawn. The rest of the pixels will be + transparent. + </p> + <p> + <b>TODO</b>: give an example. + </p> + <li class="subtitle"><a name="mousecursorset">Setting a window's mouse cursor</a> + <p> + Once the cursor is created, we can modify the cursor of our + window by using <span class="code">xcb_change_window_attributes</span> + and using the <span class="code">XCB_CWCURSOR</span> attribute: + </p> + <pre class="code"> +uint32_t mask; +uint32_t value_list; + +/* The connection and window are set */ +/* The cursor is already created */ + +mask = XCB_CWCURSOR; +value_list = cursor; +xcb_change_window_attributes (conn, window, mask, &value_list); +</pre> + <p> + Of course, the cursor and the font must be freed. + </p> + <li class="subtitle"><a name="mousecursorexample">Complete example</a> + <p> + The following example displays a window with a + button. When entering the window, the window cursor is changed + to an arrow. When clicking once on the button, the cursor is + changed to a hand. When clicking again on the button, the + cursor window gets back to the arrow. The Esc key exits the + application. + </p> + <pre class="code"> +#include <stdlib.h> +#include <stdio.h> +#include <string.h> + +#include <xcb/xcb.h> + +#define WIDTH 300 +#define HEIGHT 150 + + + +static xcb_gc_t gc_font_get (xcb_connection_t *c, + xcb_screen_t *screen, + xcb_window_t window, + const char *font_name); + +static void button_draw (xcb_connection_t *c, + xcb_screen_t *screen, + xcb_window_t window, + int16_t x1, + int16_t y1, + const char *label); + +static void text_draw (xcb_connection_t *c, + xcb_screen_t *screen, + xcb_window_t window, + int16_t x1, + int16_t y1, + const char *label); + +static void cursor_set (xcb_connection_t *c, + xcb_screen_t *screen, + xcb_window_t window, + int cursor_id); + + +static void +button_draw (xcb_connection_t *c, + xcb_screen_t *screen, + xcb_window_t window, + int16_t x1, + int16_t y1, + const char *label) +{ + xcb_point_t points[5]; + xcb_void_cookie_t cookie_gc; + xcb_void_cookie_t cookie_line; + xcb_void_cookie_t cookie_text; + xcb_generic_error_t *error; + xcb_gcontext_t gc; + int16_t width; + int16_t height; + uint8_t length; + int16_t inset; + + length = strlen (label); + inset = 2; + + gc = gc_font_get(c, screen, window, "7x13"); + + width = 7 * length + 2 * (inset + 1); + height = 13 + 2 * (inset + 1); + points[0].x = x1; + points[0].y = y1; + points[1].x = x1 + width; + points[1].y = y1; + points[2].x = x1 + width; + points[2].y = y1 - height; + points[3].x = x1; + points[3].y = y1 - height; + points[4].x = x1; + points[4].y = y1; + cookie_line = xcb_poly_line_checked (c, XCB_COORD_MODE_ORIGIN, + window, gc, 5, points); + + error = xcb_request_check (c, cookie_line); + if (error) { + fprintf (stderr, "ERROR: can't draw lines : %d\n", error->error_code); + xcb_disconnect (c); + exit (-1); + } + + cookie_text = xcb_image_text_8_checked (c, length, window, gc, + x1 + inset + 1, + y1 - inset - 1, label); + error = xcb_request_check (c, cookie_text); + if (error) { + fprintf (stderr, "ERROR: can't paste text : %d\n", error->error_code); + xcb_disconnect (c); + exit (-1); + } + + cookie_gc = xcb_free_gc (c, gc); + error = xcb_request_check (c, cookie_gc); + if (error) { + fprintf (stderr, "ERROR: can't free gc : %d\n", error->error_code); + xcb_disconnect (c); + exit (-1); + } +} + +static void +text_draw (xcb_connection_t *c, + xcb_screen_t *screen, + xcb_window_t window, + int16_t x1, + int16_t y1, + const char *label) +{ + xcb_void_cookie_t cookie_gc; + xcb_void_cookie_t cookie_text; + xcb_generic_error_t *error; + xcb_gcontext_t gc; + uint8_t length; + + length = strlen (label); + + gc = gc_font_get(c, screen, window, "7x13"); + + cookie_text = xcb_image_text_8_checked (c, length, window, gc, + x1, + y1, label); + error = xcb_request_check (c, cookie_text); + if (error) { + fprintf (stderr, "ERROR: can't paste text : %d\n", error->error_code); + xcb_disconnect (c); + exit (-1); + } + + cookie_gc = xcb_free_gc (c, gc); + error = xcb_request_check (c, cookie_gc); + if (error) { + fprintf (stderr, "ERROR: can't free gc : %d\n", error->error_code); + xcb_disconnect (c); + exit (-1); + } +} + +static xcb_gc_t +gc_font_get (xcb_connection_t *c, + xcb_screen_t *screen, + xcb_window_t window, + const char *font_name) +{ + uint32_t value_list[3]; + xcb_void_cookie_t cookie_font; + xcb_void_cookie_t cookie_gc; + xcb_generic_error_t *error; + xcb_font_t font; + xcb_gcontext_t gc; + uint32_t mask; + + font = xcb_generate_id (c); + cookie_font = xcb_open_font_checked (c, font, + strlen (font_name), + font_name); + + error = xcb_request_check (c, cookie_font); + if (error) { + fprintf (stderr, "ERROR: can't open font : %d\n", error->error_code); + xcb_disconnect (c); + return -1; + } + + gc = xcb_generate_id (c); + mask = XCB_GC_FOREGROUND | XCB_GC_BACKGROUND | XCB_GC_FONT; + value_list[0] = screen->black_pixel; + value_list[1] = screen->white_pixel; + value_list[2] = font; + cookie_gc = xcb_create_gc_checked (c, gc, window, mask, value_list); + error = xcb_request_check (c, cookie_gc); + if (error) { + fprintf (stderr, "ERROR: can't create gc : %d\n", error->error_code); + xcb_disconnect (c); + exit (-1); + } + + cookie_font = xcb_close_font_checked (c, font); + error = xcb_request_check (c, cookie_font); + if (error) { + fprintf (stderr, "ERROR: can't close font : %d\n", error->error_code); + xcb_disconnect (c); + exit (-1); + } + + return gc; +} + +static void +cursor_set (xcb_connection_t *c, + xcb_screen_t *screen, + xcb_window_t window, + int cursor_id) +{ + uint32_t values_list[3]; + xcb_void_cookie_t cookie_font; + xcb_void_cookie_t cookie_gc; + xcb_generic_error_t *error; + xcb_font_t font; + xcb_cursor_t cursor; + xcb_gcontext_t gc; + uint32_t mask; + uint32_t value_list; + + font = xcb_generate_id (c); + cookie_font = xcb_open_font_checked (c, font, + strlen ("cursor"), + "cursor"); + error = xcb_request_check (c, cookie_font); + if (error) { + fprintf (stderr, "ERROR: can't open font : %d\n", error->error_code); + xcb_disconnect (c); + exit (-1); + } + + cursor = xcb_generate_id (c); + xcb_create_glyph_cursor (c, cursor, font, font, + cursor_id, cursor_id + 1, + 0, 0, 0, + 0, 0, 0); + + gc = xcb_generate_id (c); + mask = XCB_GC_FOREGROUND | XCB_GC_BACKGROUND | XCB_GC_FONT; + values_list[0] = screen->black_pixel; + values_list[1] = screen->white_pixel; + values_list[2] = font; + cookie_gc = xcb_create_gc_checked (c, gc, window, mask, values_list); + error = xcb_request_check (c, cookie_gc); + if (error) { + fprintf (stderr, "ERROR: can't create gc : %d\n", error->error_code); + xcb_disconnect (c); + exit (-1); + } + + mask = XCB_CW_CURSOR; + value_list = cursor; + xcb_change_window_attributes (c, window, mask, &value_list); + + xcb_free_cursor (c, cursor); + + cookie_font = xcb_close_font_checked (c, font); + error = xcb_request_check (c, cookie_font); + if (error) { + fprintf (stderr, "ERROR: can't close font : %d\n", error->error_code); + xcb_disconnect (c); + exit (-1); + } +} + +int main () +{ + xcb_screen_iterator_t screen_iter; + xcb_connection_t *c; + const xcb_setup_t *setup; + xcb_screen_t *screen; + xcb_generic_event_t *e; + xcb_generic_error_t *error; + xcb_void_cookie_t cookie_window; + xcb_void_cookie_t cookie_map; + xcb_window_t window; + uint32_t mask; + uint32_t values[2]; + int screen_number; + uint8_t is_hand = 0; + + /* getting the connection */ + c = xcb_connect (NULL, &screen_number); + if (!c) { + fprintf (stderr, "ERROR: can't connect to an X server\n"); + return -1; + } + + /* getting the current screen */ + setup = xcb_get_setup (c); + + screen = NULL; + screen_iter = xcb_setup_roots_iterator (setup); + for (; screen_iter.rem != 0; --screen_number, xcb_screen_next (&screen_iter)) + if (screen_number == 0) + { + screen = screen_iter.data; + break; + } + if (!screen) { + fprintf (stderr, "ERROR: can't get the current screen\n"); + xcb_disconnect (c); + return -1; + } + + /* creating the window */ + window = xcb_generate_id (c); + mask = XCB_CW_BACK_PIXEL | XCB_CW_EVENT_MASK; + values[0] = screen->white_pixel; + values[1] = + XCB_EVENT_MASK_KEY_RELEASE | + XCB_EVENT_MASK_BUTTON_PRESS | + XCB_EVENT_MASK_EXPOSURE | + XCB_EVENT_MASK_POINTER_MOTION; + cookie_window = xcb_create_window_checked (c, + screen->root_depth, + window, screen->root, + 20, 200, WIDTH, HEIGHT, + 0, XCB_WINDOW_CLASS_INPUT_OUTPUT, + screen->root_visual, + mask, values); + cookie_map = xcb_map_window_checked (c, window); + + /* error managing */ + error = xcb_request_check (c, cookie_window); + if (error) { + fprintf (stderr, "ERROR: can't create window : %d\n", error->error_code); + xcb_disconnect (c); + return -1; + } + error = xcb_request_check (c, cookie_map); + if (error) { + fprintf (stderr, "ERROR: can't map window : %d\n", error->error_code); + xcb_disconnect (c); + return -1; + } + + cursor_set (c, screen, window, 68); + + xcb_flush(c); + + while (1) { + e = xcb_poll_for_event(c); + if (e) { + switch (e->response_type & ~0x80) { + case XCB_EXPOSE: { + char *text; + + text = "click here to change cursor"; + button_draw (c, screen, window, + (WIDTH - 7 * strlen(text)) / 2, + (HEIGHT - 16) / 2, text); + + text = "Press ESC key to exit..."; + text_draw (c, screen, window, 10, HEIGHT - 10, text); + break; + } + case XCB_BUTTON_PRESS: { + xcb_button_press_event_t *ev; + int length; + + ev = (xcb_button_press_event_t *)e; + length = strlen ("click here to change cursor"); + + if ((ev->event_x >= (WIDTH - 7 * length) / 2) && + (ev->event_x <= ((WIDTH - 7 * length) / 2 + 7 * length + 6)) && + (ev->event_y >= (HEIGHT - 16) / 2 - 19) && + (ev->event_y <= ((HEIGHT - 16) / 2))) + is_hand = 1 - is_hand; + + is_hand ? cursor_set (c, screen, window, 58) : cursor_set (c, screen, window, 68); + } + case XCB_KEY_RELEASE: { + xcb_key_release_event_t *ev; + + ev = (xcb_key_release_event_t *)e; + + switch (ev->detail) { + /* ESC */ + case 9: + free (e); + xcb_disconnect (c); + return 0; + } + } + } + free (e); + } + } + + return 0; +} +</pre> + </ol> + <li class="title"><a name="translation">Translation of basic Xlib functions and macros</a> + <p> + The problem when you want to port an Xlib program to XCB is that + you don't know if the Xlib function that you want to "translate" + is a X Window one or an Xlib macro. In that section, we describe + a way to translate the usual functions or macros that Xlib + provides. It's usually just a member of a structure. + </p> + <ol> + <li class="subtitle"><a name="displaystructure">Members of the Display structure</a> + <p> + In this section, we look at how to translate the macros that + return some members of the <span class="code">Display</span> + structure. They are obtained by using a function that requires a + <span class="code">xcb_connection_t *</span> or a member of the + <span class="code">xcb_setup_t</span> structure + (via the function <span class="code">xcb_get_setup</span>), or + a function that requires that structure. + </p> + <ol> + <li class="subtitle"><a name="ConnectionNumber">ConnectionNumber</a> + <p> + This number is the file descriptor that connects the client + to the server. You just have to use that function: + </p> + <pre class="code"> +int xcb_get_file_descriptor (xcb_connection_t *c); +</pre> + <li class="subtitle"><a name="DefaultScreen"></a>DefaultScreen + <p> + That number is not stored by XCB. It is returned in the + second parameter of the function <span class="code"><a href="#openconn">xcb_connect</a></span>. + Hence, you have to store it yourself if you want to use + it. Then, to get the <span class="code">xcb_screen_t</span> + structure, you have to iterate on the screens. + The equivalent function of the Xlib's + <span class="code">ScreenOfDisplay</span> function can be + found <a href="#ScreenOfDisplay">below</a>. This is also provided in the + xcb_aux_t library as <span class="code">xcb_aux_get_screen()</span>. OK, here is the + small piece of code to get that number: + </p> + <pre class="code"> +xcb_connection_t *c; +int screen_default_nbr; + +/* you pass the name of the display you want to xcb_connect_t */ + +c = xcb_connect (display_name, &screen_default_nbr); + +/* screen_default_nbr contains now the number of the default screen */ +</pre> + <li class="subtitle"><a name="QLength"></a>QLength + <p> + Not documented yet. + </p> + <p> + However, this points out a basic difference in philosophy between + Xlib and XCB. Xlib has several functions for filtering and + manipulating the incoming and outgoing X message queues. XCB + wishes to hide this as much as possible from the user, which + allows for more freedom in implementation strategies. + </p> + <li class="subtitle"><a name="ScreenCount"></a>ScreenCount + <p> + You get the count of screens with the functions + <span class="code">xcb_get_setup</span> + and + <span class="code">xcb_setup_roots_iterator</span> + (if you need to iterate): + </p> + <pre class="code"> +xcb_connection_t *c; +int screen_count; + +/* you init the connection */ + +screen_count = xcb_setup_roots_iterator (xcb_get_setup (c)).rem; + +/* screen_count contains now the count of screens */ +</pre> + <p> + If you don't want to iterate over the screens, a better way + to get that number is to use + <span class="code">xcb_setup_roots_length_t</span>: + </p> + <pre class="code"> +xcb_connection_t *c; +int screen_count; + +/* you init the connection */ + +screen_count = xcb_setup_roots_length (xcb_get_setup (c)); + +/* screen_count contains now the count of screens */ +</pre> + <li class="subtitle"><a name="ServerVendor"></a>ServerVendor + <p> + You get the name of the vendor of the server hardware with + the functions <span class="code">xcb_get_setup</span> + and + <span + class="code">xcb_setup_vendor</span>. Beware + that, unlike Xlib, the string returned by XCB is not + necessarily null-terminaled: + </p> + <pre class="code"> +xcb_connection_t *c; +char *vendor = NULL; +int length; + +/* you init the connection */ +length = xcb_setup_vendor_length (xcb_get_setup (c)); +vendor = (char *)malloc (length + 1); +if (vendor) +memcpy (vendor, xcb_setup_vendor (xcb_get_setup (c)), length); +vendor[length] = '\0'; + +/* vendor contains now the name of the vendor. Must be freed when not used anymore */ +</pre> + <li class="subtitle"><a name="ProtocolVersion"></a>ProtocolVersion + <p> + You get the major version of the protocol in the + <span class="code">xcb_setup_t</span> + structure, with the function <span class="code">xcb_get_setup</span>: + </p> + <pre class="code"> +xcb_connection_t *c; +uint16_t protocol_major_version; + +/* you init the connection */ + +protocol_major_version = xcb_get_setup (c)->protocol_major_version; + +/* protocol_major_version contains now the major version of the protocol */ +</pre> + <li class="subtitle"><a name="ProtocolRevision"></a>ProtocolRevision + <p> + You get the minor version of the protocol in the + <span class="code">xcb_setup_t</span> + structure, with the function <span class="code">xcb_get_setup</span>: + </p> + <pre class="code"> +xcb_connection_t *c; +uint16_t protocol_minor_version; + +/* you init the connection */ + +protocol_minor_version = xcb_get_setup (c)->protocol_minor_version; + +/* protocol_minor_version contains now the minor version of the protocol */ +</pre> + <li class="subtitle"><a name="VendorRelease"></a>VendorRelease + <p> + You get the number of the release of the server hardware in the + <span class="code">xcb_setup_t</span> + structure, with the function <span class="code">xcb_get_setup</span>: + </p> + <pre class="code"> +xcb_connection_t *c; +uint32_t release_number; + +/* you init the connection */ + +release_number = xcb_get_setup (c)->release_number; + +/* release_number contains now the number of the release of the server hardware */ +</pre> + <li class="subtitle"><a name="DisplayString"></a>DisplayString + <p> + The name of the display is not stored in XCB. You have to + store it by yourself. + </p> + <li class="subtitle"><a name="BitmapUnit"></a>BitmapUnit + <p> + You get the bitmap scanline unit in the + <span class="code">xcb_setup_t</span> + structure, with the function <span class="code">xcb_get_setup</span>: + </p> + <pre class="code"> +xcb_connection_t *c; +uint8_t bitmap_format_scanline_unit; + +/* you init the connection */ + +bitmap_format_scanline_unit = xcb_get_setup (c)->bitmap_format_scanline_unit; + +/* bitmap_format_scanline_unit contains now the bitmap scanline unit */ +</pre> + <li class="subtitle"><a name="BitmapBitOrder"></a>BitmapBitOrder + <p> + You get the bitmap bit order in the + <span class="code">xcb_setup_t</span> + structure, with the function <span class="code">xcb_get_setup</span>: + </p> + <pre class="code"> +xcb_connection_t *c; +uint8_t bitmap_format_bit_order; + +/* you init the connection */ + +bitmap_format_bit_order = xcb_get_setup (c)->bitmap_format_bit_order; + +/* bitmap_format_bit_order contains now the bitmap bit order */ +</pre> + <li class="subtitle"><a name="BitmapPad"></a>BitmapPad + <p> + You get the bitmap scanline pad in the + <span class="code">xcb_setup_t</span> + structure, with the function <span class="code">xcb_get_setup</span>: + </p> + <pre class="code"> +xcb_connection_t *c; +uint8_t bitmap_format_scanline_pad; + +/* you init the connection */ + +bitmap_format_scanline_pad = xcb_get_setup (c)->bitmap_format_scanline_pad; + +/* bitmap_format_scanline_pad contains now the bitmap scanline pad */ +</pre> + <li class="subtitle"><a name="ImageByteOrder"></a>ImageByteOrder + <p> + You get the image byte order in the + <span class="code">xcb_setup_t</span> + structure, with the function <span class="code">xcb_get_setup</span>: + </p> + <pre class="code"> +xcb_connection_t *c; +uint8_t image_byte_order; + +/* you init the connection */ + +image_byte_order = xcb_get_setup (c)->image_byte_order; + +/* image_byte_order contains now the image byte order */ +</pre> + </ol> + <li class="subtitle"><a name="screenofdisplay">ScreenOfDisplay related functions</a> + <p> + in Xlib, <span class="code">ScreenOfDisplay</span> returns a + <span class="code">Screen</span> structure that contains + several characteristics of your screen. XCB has a similar + structure (<span class="code">xcb_screen_t</span>), + but the way to obtain it is a bit different. With + Xlib, you just provide the number of the screen and you grab it + from an array. With XCB, you iterate over all the screens to + obtain the one you want. The complexity of this operation is + O(n). So the best is to store this structure if you use + it often. See <a href="#ScreenOfDisplay">screen_of_display</a> just below. + </p> + <p> + Xlib provides generally two functions to obtain the characteristics + related to the screen. One with the display and the number of + the screen, which calls <span class="code">ScreenOfDisplay</span>, + and the other that uses the <span class="code">Screen</span> structure. + This might be a bit confusing. As mentioned above, with XCB, it + is better to store the <span class="code">xcb_screen_t</span> + structure. Then, you have to read the members of this + structure. That's why the Xlib functions are put by pairs (or + more) as, with XCB, you will use the same code. + </p> + <ol> + <li class="subtitle"><a name="ScreenOfDisplay">ScreenOfDisplay</a> + <p> + This function returns the Xlib <span class="code">Screen</span> + structure. With XCB, you iterate over all the screens and + once you get the one you want, you return it: + </p> + <pre class="code"><a name="ScreenOfDisplay"></a> +xcb_screen_t *screen_of_display (xcb_connection_t *c, + int screen) +{ + xcb_screen_iterator_t iter; + + iter = xcb_setup_roots_iterator (xcb_get_setup (c)); + for (; iter.rem; --screen, xcb_screen_next (&iter)) + if (screen == 0) + return iter.data; + + return NULL; +} +</pre> + <p> + As mentioned above, you might want to store the value + returned by this function. + </p> + <p> + All the functions below will use the result of that + function, as they just grab a specific member of the + <span class="code">xcb_screen_t</span> structure. + </p> + <li class="subtitle"><a name="DefaultScreenOfDisplay"></a>DefaultScreenOfDisplay + <p> + It is the default screen that you obtain when you connect to + the X server. It suffices to call the <a href="#ScreenOfDisplay">screen_of_display</a> + function above with the connection and the number of the + default screen. + </p> + <pre class="code"> +xcb_connection_t *c; +int screen_default_nbr; +xcb_screen_t *default_screen; /* the returned default screen */ + +/* you pass the name of the display you want to xcb_connect_t */ + +c = xcb_connect (display_name, &screen_default_nbr); +default_screen = screen_of_display (c, screen_default_nbr); + +/* default_screen contains now the default root window, or a NULL window if no screen is found */ +</pre> + <li class="subtitle"><a name="RootWindow">RootWindow / RootWindowOfScreen</a> + <br> + <pre class="code"> +xcb_connection_t *c; +xcb_screen_t *screen; +int screen_nbr; +xcb_window_t root_window = { 0 }; /* the returned window */ + +/* you init the connection and screen_nbr */ + +screen = screen_of_display (c, screen_nbr); +if (screen) + root_window = screen->root; + +/* root_window contains now the root window, or a NULL window if no screen is found */ +</pre> + <li class="subtitle"><a name="DefaultRootWindow">DefaultRootWindow</a> + <p> + It is the root window of the default screen. So, you call + <a name="ScreenOfDisplay">ScreenOfDisplay</a> with the + default screen number and you get the + <a href="#RootWindow">root window</a> as above: + </p> + <pre class="code"> +xcb_connection_t *c; +xcb_screen_t *screen; +int screen_default_nbr; +xcb_window_t root_window = { 0 }; /* the returned root window */ + +/* you pass the name of the display you want to xcb_connect_t */ + +c = xcb_connect (display_name, &screen_default_nbr); +screen = screen_of_display (c, screen_default_nbr); +if (screen) + root_window = screen->root; + +/* root_window contains now the default root window, or a NULL window if no screen is found */ +</pre> + <li class="subtitle"><a name="DefaultVisual">DefaultVisual / DefaultVisualOfScreen</a> + <p> + While a Visual is, in Xlib, a structure, in XCB, there are + two types: <span class="code">xcb_visualid_t</span>, which is + the Id of the visual, and <span class="code">xcb_visualtype_t</span>, + which corresponds to the Xlib Visual. To get the Id of the + visual of a screen, just get the + <span class="code">root_visual</span> + member of a <span class="code">xcb_screen_t</span>: + </p> + <pre class="code"> +xcb_connection_t *c; +xcb_screen_t *screen; +int screen_nbr; +xcb_visualid_t root_visual = { 0 }; /* the returned visual Id */ + +/* you init the connection and screen_nbr */ + +screen = screen_of_display (c, screen_nbr); +if (screen) + root_visual = screen->root_visual; + +/* root_visual contains now the value of the Id of the visual, or a NULL visual if no screen is found */ +</pre> + <p> + To get the <span class="code">xcb_visualtype_t</span> + structure, it's a bit less easy. You have to get the + <span class="code">xcb_screen_t</span> structure that you want, + get its <span class="code">root_visual</span> member, + then iterate over the <span class="code">xcb_depth_t</span>s + and the <span class="code">xcb_visualtype_t</span>s, and compare + the <span class="code">xcb_visualid_t</span> of these <span class="code">xcb_visualtype_t</span>s: + with <span class="code">root_visual</span>: + </p> + <pre class="code"> +xcb_connection_t *c; +xcb_screen_t *screen; +int screen_nbr; +xcb_visualid_t root_visual = { 0 }; +xcb_visualtype_t *visual_type = NULL; /* the returned visual type */ + +/* you init the connection and screen_nbr */ + +screen = screen_of_display (c, screen_nbr); +if (screen) { + xcb_depth_iterator_t depth_iter; + + depth_iter = xcb_screen_allowed_depths_iterator (screen); + for (; depth_iter.rem; xcb_depth_next (&depth_iter)) { + xcb_visualtype_iterator_t visual_iter; + + visual_iter = xcb_depth_visuals_iterator (depth_iter.data); + for (; visual_iter.rem; xcb_visualtype_next (&visual_iter)) { + if (screen->root_visual == visual_iter.data->visual_id) { + visual_type = visual_iter.data; + break; + } + } + } +} + +/* visual_type contains now the visual structure, or a NULL visual structure if no screen is found */ +</pre> + <li class="subtitle"><a name="DefaultGC">DefaultGC / DefaultGCOfScreen</a> + <p> + This default Graphic Context is just a newly created Graphic + Context, associated to the root window of a + <span class="code">xcb_screen_t</span>, + using the black white pixels of that screen: + </p> + <pre class="code"> +xcb_connection_t *c; +xcb_screen_t *screen; +int screen_nbr; +xcb_gcontext_t gc = { 0 }; /* the returned default graphic context */ + +/* you init the connection and screen_nbr */ + +screen = screen_of_display (c, screen_nbr); +if (screen) { + xcb_drawable_t draw; + uint32_t mask; + uint32_t values[2]; + + gc = xcb_generate_id (c); + draw = screen->root; + mask = XCB_GC_FOREGROUND | XCB_GC_BACKGROUND; + values[0] = screen->black_pixel; + values[1] = screen->white_pixel; + xcb_create_gc (c, gc, draw, mask, values); +} + +/* gc contains now the default graphic context */ +</pre> + <li class="subtitle"><a name="BlackPixel">BlackPixel / BlackPixelOfScreen</a> + <p> + It is the Id of the black pixel, which is in the structure + of an <span class="code">xcb_screen_t</span>. + </p> + <pre class="code"> +xcb_connection_t *c; +xcb_screen_t *screen; +int screen_nbr; +uint32_t black_pixel = 0; /* the returned black pixel */ + +/* you init the connection and screen_nbr */ + +screen = screen_of_display (c, screen_nbr); +if (screen) + black_pixel = screen->black_pixel; + +/* black_pixel contains now the value of the black pixel, or 0 if no screen is found */ +</pre> + <li class="subtitle"><a name="WhitePixel">WhitePixel / WhitePixelOfScreen</a> + <p> + It is the Id of the white pixel, which is in the structure + of an <span class="code">xcb_screen_t</span>. + </p> + <pre class="code"> +xcb_connection_t *c; +xcb_screen_t *screen; +int screen_nbr; +uint32_t white_pixel = 0; /* the returned white pixel */ + +/* you init the connection and screen_nbr */ + +screen = screen_of_display (c, screen_nbr); +if (screen) + white_pixel = screen->white_pixel; + +/* white_pixel contains now the value of the white pixel, or 0 if no screen is found */ +</pre> + <li class="subtitle"><a name="DisplayWidth">DisplayWidth / WidthOfScreen</a> + <p> + It is the width in pixels of the screen that you want, and + which is in the structure of the corresponding + <span class="code">xcb_screen_t</span>. + </p> + <pre class="code"> +xcb_connection_t *c; +xcb_screen_t *screen; +int screen_nbr; +uint32_t width_in_pixels = 0; /* the returned width in pixels */ + +/* you init the connection and screen_nbr */ + +screen = screen_of_display (c, screen_nbr); +if (screen) + width_in_pixels = screen->width_in_pixels; + +/* width_in_pixels contains now the width in pixels, or 0 if no screen is found */ +</pre> + <li class="subtitle"><a name="DisplayHeight">DisplayHeight / HeightOfScreen</a> + <p> + It is the height in pixels of the screen that you want, and + which is in the structure of the corresponding + <span class="code">xcb_screen_t</span>. + </p> + <pre class="code"> +xcb_connection_t *c; +xcb_screen_t *screen; +int screen_nbr; +uint32_t height_in_pixels = 0; /* the returned height in pixels */ + +/* you init the connection and screen_nbr */ + +screen = screen_of_display (c, screen_nbr); +if (screen) + height_in_pixels = screen->height_in_pixels; + +/* height_in_pixels contains now the height in pixels, or 0 if no screen is found */ +</pre> + <li class="subtitle"><a name="DisplayWidthMM">DisplayWidthMM / WidthMMOfScreen</a> + <p> + It is the width in millimeters of the screen that you want, and + which is in the structure of the corresponding + <span class="code">xcb_screen_t</span>. + </p> + <pre class="code"> +xcb_connection_t *c; +xcb_screen_t *screen; +int screen_nbr; +uint32_t width_in_millimeters = 0; /* the returned width in millimeters */ + +/* you init the connection and screen_nbr */ + +screen = screen_of_display (c, screen_nbr); +if (screen) + width_in_millimeters = screen->width_in_millimeters; + +/* width_in_millimeters contains now the width in millimeters, or 0 if no screen is found */ +</pre> + <li class="subtitle"><a name="DisplayHeightMM">DisplayHeightMM / HeightMMOfScreen</a> + <p> + It is the height in millimeters of the screen that you want, and + which is in the structure of the corresponding + <span class="code">xcb_screen_t</span>. + </p> + <pre class="code"> +xcb_connection_t *c; +xcb_screen_t *screen; +int screen_nbr; +uint32_t height_in_millimeters = 0; /* the returned height in millimeters */ + +/* you init the connection and screen_nbr */ + +screen = screen_of_display (c, screen_nbr); +if (screen) + height_in_millimeters = screen->height_in_millimeters; + +/* height_in_millimeters contains now the height in millimeters, or 0 if no screen is found */ +</pre> + <li class="subtitle"><a name="DisplayPlanes">DisplayPlanes / DefaultDepth / DefaultDepthOfScreen / PlanesOfScreen</a> + <p> + It is the depth (in bits) of the root window of the + screen. You get it from the <span class="code">xcb_screen_t</span> structure. + </p> + <pre class="code"> +xcb_connection_t *c; +xcb_screen_t *screen; +int screen_nbr; +uint8_t root_depth = 0; /* the returned depth of the root window */ + +/* you init the connection and screen_nbr */ + +screen = screen_of_display (c, screen_nbr); +if (screen) + root_depth = screen->root_depth; + +/* root_depth contains now the depth of the root window, or 0 if no screen is found */ +</pre> + <li class="subtitle"><a name="DefaultColormap">DefaultColormap / DefaultColormapOfScreen</a> + <p> + This is the default colormap of the screen (and not the + (default) colormap of the default screen !). As usual, you + get it from the <span class="code">xcb_screen_t</span> structure: + </p> + <pre class="code"> +xcb_connection_t *c; +xcb_screen_t *screen; +int screen_nbr; +xcb_colormap_t default_colormap = { 0 }; /* the returned default colormap */ + +/* you init the connection and screen_nbr */ + +screen = screen_of_display (c, screen_nbr); +if (screen) + default_colormap = screen->default_colormap; + +/* default_colormap contains now the default colormap, or a NULL colormap if no screen is found */ +</pre> + <li class="subtitle"><a name="MinCmapsOfScreen"></a>MinCmapsOfScreen + <p> + You get the minimum installed colormaps in the <span class="code">xcb_screen_t</span> structure: + </p> + <pre class="code"> +xcb_connection_t *c; +xcb_screen_t *screen; +int screen_nbr; +uint16_t min_installed_maps = 0; /* the returned minimum installed colormaps */ + +/* you init the connection and screen_nbr */ + +screen = screen_of_display (c, screen_nbr); +if (screen) + min_installed_maps = screen->min_installed_maps; + +/* min_installed_maps contains now the minimum installed colormaps, or 0 if no screen is found */ +</pre> + <li class="subtitle"><a name="MaxCmapsOfScreen"></a>MaxCmapsOfScreen + <p> + You get the maximum installed colormaps in the <span class="code">xcb_screen_t</span> structure: + </p> + <pre class="code"> +xcb_connection_t *c; +xcb_screen_t *screen; +int screen_nbr; +uint16_t max_installed_maps = 0; /* the returned maximum installed colormaps */ + +/* you init the connection and screen_nbr */ + +screen = screen_of_display (c, screen_nbr); +if (screen) + max_installed_maps = screen->max_installed_maps; + +/* max_installed_maps contains now the maximum installed colormaps, or 0 if no screen is found */ +</pre> + <li class="subtitle"><a name="DoesSaveUnders"></a>DoesSaveUnders + <p> + You know if <span class="code">save_unders</span> is set, + by looking in the <span class="code">xcb_screen_t</span> structure: + </p> + <pre class="code"> +xcb_connection_t *c; +xcb_screen_t *screen; +int screen_nbr; +uint8_t save_unders = 0; /* the returned value of save_unders */ + +/* you init the connection and screen_nbr */ + +screen = screen_of_display (c, screen_nbr); +if (screen) + save_unders = screen->save_unders; + +/* save_unders contains now the value of save_unders, or FALSE if no screen is found */ +</pre> + <li class="subtitle"><a name="DoesBackingStore"></a>DoesBackingStore + <p> + You know the value of <span class="code">backing_stores</span>, + by looking in the <span class="code">xcb_screen_t</span> structure: + </p> + <pre class="code"> +xcb_connection_t *c; +xcb_screen_t *screen; +int screen_nbr; +uint8_t backing_stores = 0; /* the returned value of backing_stores */ + +/* you init the connection and screen_nbr */ + +screen = screen_of_display (c, screen_nbr); +if (screen) + backing_stores = screen->backing_stores; + +/* backing_stores contains now the value of backing_stores, or FALSE if no screen is found */ +</pre> + <li class="subtitle"><a name="EventMaskOfScreen"></a>EventMaskOfScreen + <p> + To get the current input masks, + you look in the <span class="code">xcb_screen_t</span> structure: + </p> + <pre class="code"> +xcb_connection_t *c; +xcb_screen_t *screen; +int screen_nbr; +uint32_t current_input_masks = 0; /* the returned value of current input masks */ + +/* you init the connection and screen_nbr */ + +screen = screen_of_display (c, screen_nbr); +if (screen) + current_input_masks = screen->current_input_masks; + +/* current_input_masks contains now the value of the current input masks, or FALSE if no screen is found */ +</pre> + </ol> + <li class="subtitle"><a name="misc">Miscellaneous macros</a> + <ol> + <li class="subtitle"><a name="DisplayOfScreen"></a>DisplayOfScreen + <p> + in Xlib, the <span class="code">Screen</span> structure + stores its associated <span class="code">Display</span> + structure. This is not the case in the X Window protocol, + hence, it's also not the case in XCB. So you have to store + it by yourself. + </p> + <li class="subtitle"><a name="DisplayCells"></a>DisplayCells / CellsOfScreen + <p> + To get the colormap entries, + you look in the <span class="code">xcb_visualtype_t</span> + structure, that you grab like <a class="subsection" href="#DefaultVisual">here</a>: + </p> + <pre class="code"> +xcb_connection_t *c; +xcb_visualtype_t *visual_type; +uint16_t colormap_entries = 0; /* the returned value of the colormap entries */ + +/* you init the connection and visual_type */ + +if (visual_type) + colormap_entries = visual_type->colormap_entries; + +/* colormap_entries contains now the value of the colormap entries, or FALSE if no screen is found */ +</pre> + </ol> + </ol> + </ol> + </div> +</body> + +</html> diff --git a/libxcb/doc/tutorial/xcb.css b/libxcb/doc/tutorial/xcb.css index 48b0249a8..e059b3b33 100644 --- a/libxcb/doc/tutorial/xcb.css +++ b/libxcb/doc/tutorial/xcb.css @@ -1,123 +1,123 @@ -body
-{
- background-color: #dddddd;
- color: #000000;
- padding: 8px;
- margin: 0px;
-}
-div.title
-{
- text-align: center;
- font-weight: bold;
- font-size: 28px;
-}
-div.emph
-{
- text-align: left;
- font-weight: bold;
-}
-div.section li.title
-{
- font-weight: bold;
- font-size: 22px;
-}
-div.section li.title p
-{
- font-weight: normal;
- font-size: 16px;
-}
-div.section li.title ul
-{
- font-weight: normal;
- font-size: 16px;
-}
-div.section li.title ol
-{
- font-weight: normal;
- font-size: 16px;
-}
-div.section li.subtitle
-{
- font-weight: bold;
- font-size: 18px;
-}
-div.section li.subsubtitle
-{
- font-weight: bold;
- font-size: 16px;
-}
-div.comp
-{
- border: thin solid #000000;
- color: #000000;
- background-color: #ffffe0;
- padding: 14px;
-}
-div.comp div.title
-{
- font-weight: bold;
- font-size: 16px;
- text-align: center;
-}
-div.comp div.xlib ul li
-{
- font-family: monospace;
- font-size: 12px;
- font-weight: bold;
- position: absolute;
- width: 49%;
- margin-left: 0px;
- margin-top: 10px;
-}
-div.comp div.xcb ul li
-{
- font-family: monospace;
- font-size: 12px;
- font-weight: bold;
- position: relative;
- margin-left: 51%;
- margin-top: 10px;
-}
-pre.code
-{
- border: thin solid #000000;
- color: #000000;
- background-color: #efefef;
- padding: 4px;
- text-align: left;
- font-size: 10px;
-}
-pre.text
-{
- border: thin solid #000000;
- color: #000000;
- background-color: #efefef;
- padding: 4px;
- text-align: left;
- font-size: 10px;
-}
-span.code
-{
- font-family: monospace;
- font-size: 12px;
-}
-pre.code .type
-{
- color: #44bb44;
-}
-pre.code .function
-{
- color: #449fb7;
-}
-pre.code .include
-{
- color: #7d93ae;
-}
-pre.code .string
-{
- color: #ef6e4b;
-}
-pre.code .keyword
-{
- color: #00bbbb;
-}
+body +{ + background-color: #dddddd; + color: #000000; + padding: 8px; + margin: 0px; +} +div.title +{ + text-align: center; + font-weight: bold; + font-size: 28px; +} +div.emph +{ + text-align: left; + font-weight: bold; +} +div.section li.title +{ + font-weight: bold; + font-size: 22px; +} +div.section li.title p +{ + font-weight: normal; + font-size: 16px; +} +div.section li.title ul +{ + font-weight: normal; + font-size: 16px; +} +div.section li.title ol +{ + font-weight: normal; + font-size: 16px; +} +div.section li.subtitle +{ + font-weight: bold; + font-size: 18px; +} +div.section li.subsubtitle +{ + font-weight: bold; + font-size: 16px; +} +div.comp +{ + border: thin solid #000000; + color: #000000; + background-color: #ffffe0; + padding: 14px; +} +div.comp div.title +{ + font-weight: bold; + font-size: 16px; + text-align: center; +} +div.comp div.xlib ul li +{ + font-family: monospace; + font-size: 12px; + font-weight: bold; + position: absolute; + width: 49%; + margin-left: 0px; + margin-top: 10px; +} +div.comp div.xcb ul li +{ + font-family: monospace; + font-size: 12px; + font-weight: bold; + position: relative; + margin-left: 51%; + margin-top: 10px; +} +pre.code +{ + border: thin solid #000000; + color: #000000; + background-color: #efefef; + padding: 4px; + text-align: left; + font-size: 10px; +} +pre.text +{ + border: thin solid #000000; + color: #000000; + background-color: #efefef; + padding: 4px; + text-align: left; + font-size: 10px; +} +span.code +{ + font-family: monospace; + font-size: 12px; +} +pre.code .type +{ + color: #44bb44; +} +pre.code .function +{ + color: #449fb7; +} +pre.code .include +{ + color: #7d93ae; +} +pre.code .string +{ + color: #ef6e4b; +} +pre.code .keyword +{ + color: #00bbbb; +} diff --git a/libxcb/doc/xcb.doxygen.in b/libxcb/doc/xcb.doxygen.in index d674cbab1..58aa07630 100644 --- a/libxcb/doc/xcb.doxygen.in +++ b/libxcb/doc/xcb.doxygen.in @@ -1,1253 +1,1253 @@ -# Doxyfile 1.5.0
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project
-#
-# All text after a hash (#) is considered a comment and will be ignored
-# The format is:
-# TAG = value [value, ...]
-# For lists items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (" ")
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
-# by quotes) that should identify the project.
-
-PROJECT_NAME = "XCB"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number.
-# This could be handy for archiving the generated documentation or
-# if some version control system is used.
-
-PROJECT_NUMBER = @VERSION@
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
-# base path where the generated documentation will be put.
-# If a relative path is entered, it will be relative to the location
-# where doxygen was started. If left blank the current directory will be used.
-
-OUTPUT_DIRECTORY = @top_builddir@/doc
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
-# 4096 sub-directories (in 2 levels) under the output directory of each output
-# format and will distribute the generated files over these directories.
-# Enabling this option can be useful when feeding doxygen a huge amount of
-# source files, where putting all generated files in the same directory would
-# otherwise cause performance problems for the file system.
-
-CREATE_SUBDIRS = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# The default language is English, other supported languages are:
-# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
-# Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian,
-# Italian, Japanese, Japanese-en (Japanese with English messages), Korean,
-# Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian,
-# Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
-
-OUTPUT_LANGUAGE = English
-
-# This tag can be used to specify the encoding used in the generated output.
-# The encoding is not always determined by the language that is chosen,
-# but also whether or not the output is meant for Windows or non-Windows users.
-# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
-# forces the Windows encoding (this is the default for the Windows binary),
-# whereas setting the tag to NO uses a Unix-style encoding (the default for
-# all platforms other than Windows).
-
-USE_WINDOWS_ENCODING = NO
-
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
-# include brief member descriptions after the members that are listed in
-# the file and class documentation (similar to JavaDoc).
-# Set to NO to disable this.
-
-BRIEF_MEMBER_DESC = YES
-
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
-# the brief description of a member or function before the detailed description.
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-
-REPEAT_BRIEF = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator
-# that is used to form the text in various listings. Each string
-# in this list, if found as the leading text of the brief description, will be
-# stripped from the text and the result after processing the whole list, is
-# used as the annotated text. Otherwise, the brief description is used as-is.
-# If left blank, the following values are used ("$name" is automatically
-# replaced with the name of the entity): "The $name class" "The $name widget"
-# "The $name file" "is" "provides" "specifies" "contains"
-# "represents" "a" "an" "the"
-
-ABBREVIATE_BRIEF =
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# Doxygen will generate a detailed section even if there is only a brief
-# description.
-
-ALWAYS_DETAILED_SEC = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-
-INLINE_INHERITED_MEMB = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
-# path before files name in the file list and in the header files. If set
-# to NO the shortest path that makes the file name unique will be used.
-
-FULL_PATH_NAMES = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
-# can be used to strip a user-defined part of the path. Stripping is
-# only done if one of the specified strings matches the left-hand part of
-# the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the
-# path to strip.
-
-STRIP_FROM_PATH =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
-# the path mentioned in the documentation of a class, which tells
-# the reader which header file to include in order to use a class.
-# If left blank only the name of the header file containing the class
-# definition is used. Otherwise one should specify the include paths that
-# are normally passed to the compiler using the -I flag.
-
-STRIP_FROM_INC_PATH =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
-# (but less readable) file names. This can be useful is your file systems
-# doesn't support long names like on DOS, Mac, or CD-ROM.
-
-SHORT_NAMES = NO
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
-# will interpret the first line (until the first dot) of a JavaDoc-style
-# comment as the brief description. If set to NO, the JavaDoc
-# comments will behave just like the Qt-style comments (thus requiring an
-# explicit @brief command for a brief description.
-
-JAVADOC_AUTOBRIEF = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
-# treat a multi-line C++ special comment block (i.e. a block of //! or ///
-# comments) as a brief description. This used to be the default behaviour.
-# The new default is to treat a multi-line C++ comment block as a detailed
-# description. Set this tag to YES if you prefer the old behaviour instead.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the DETAILS_AT_TOP tag is set to YES then Doxygen
-# will output the detailed description near the top, like JavaDoc.
-# If set to NO, the detailed description appears after the member
-# documentation.
-
-DETAILS_AT_TOP = NO
-
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
-# member inherits the documentation from any documented member that it
-# re-implements.
-
-INHERIT_DOCS = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
-# a new page for each member. If set to NO, the documentation of a member will
-# be part of the file/class/namespace that contains it.
-
-SEPARATE_MEMBER_PAGES = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab.
-# Doxygen uses this value to replace tabs by spaces in code fragments.
-
-TAB_SIZE = 8
-
-# This tag can be used to specify a number of aliases that acts
-# as commands in the documentation. An alias has the form "name=value".
-# For example adding "sideeffect=\par Side Effects:\n" will allow you to
-# put the command \sideeffect (or @sideeffect) in the documentation, which
-# will result in a user-defined paragraph with heading "Side Effects:".
-# You can put \n's in the value part of an alias to insert newlines.
-
-ALIASES =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
-# sources only. Doxygen will then generate output that is more tailored for C.
-# For instance, some of the names that are used will be different. The list
-# of all members will be omitted, etc.
-
-OPTIMIZE_OUTPUT_FOR_C = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
-# sources only. Doxygen will then generate output that is more tailored for Java.
-# For instance, namespaces will be presented as packages, qualified scopes
-# will look different, etc.
-
-OPTIMIZE_OUTPUT_JAVA = NO
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to
-# include (a tag file for) the STL sources as input, then you should
-# set this tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
-# func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-
-BUILTIN_STL_SUPPORT = NO
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-
-DISTRIBUTE_GROUP_DOC = NO
-
-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
-# the same type (for instance a group of public functions) to be put as a
-# subgroup of that type (e.g. under the Public Functions section). Set it to
-# NO to prevent subgrouping. Alternatively, this can be done per class using
-# the \nosubgrouping command.
-
-SUBGROUPING = YES
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available.
-# Private class members and static file members will be hidden unless
-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
-
-EXTRACT_ALL = NO
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
-# will be included in the documentation.
-
-EXTRACT_PRIVATE = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file
-# will be included in the documentation.
-
-EXTRACT_STATIC = NO
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
-# defined locally in source files will be included in the documentation.
-# If set to NO only classes defined in header files are included.
-
-EXTRACT_LOCAL_CLASSES = YES
-
-# This flag is only useful for Objective-C code. When set to YES local
-# methods, which are defined in the implementation section but not in
-# the interface are included in the documentation.
-# If set to NO (the default) only methods in the interface are included.
-
-EXTRACT_LOCAL_METHODS = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
-# undocumented members of documented classes, files or namespaces.
-# If set to NO (the default) these members will be included in the
-# various overviews, but no documentation section is generated.
-# This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_MEMBERS = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy.
-# If set to NO (the default) these classes will be included in the various
-# overviews. This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_CLASSES = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
-# friend (class|struct|union) declarations.
-# If set to NO (the default) these declarations will be included in the
-# documentation.
-
-HIDE_FRIEND_COMPOUNDS = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
-# documentation blocks found inside the body of a function.
-# If set to NO (the default) these blocks will be appended to the
-# function's detailed documentation block.
-
-HIDE_IN_BODY_DOCS = NO
-
-# The INTERNAL_DOCS tag determines if documentation
-# that is typed after a \internal command is included. If the tag is set
-# to NO (the default) then the documentation will be excluded.
-# Set it to YES to include the internal documentation.
-
-INTERNAL_DOCS = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
-# file names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-
-CASE_SENSE_NAMES = YES
-
-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
-# will show members with their full class and namespace scopes in the
-# documentation. If set to YES the scope will be hidden.
-
-HIDE_SCOPE_NAMES = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
-# will put a list of the files that are included by a file in the documentation
-# of that file.
-
-SHOW_INCLUDE_FILES = YES
-
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
-# is inserted in the documentation for inline members.
-
-INLINE_INFO = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
-# will sort the (detailed) documentation of file and class members
-# alphabetically by member name. If set to NO the members will appear in
-# declaration order.
-
-SORT_MEMBER_DOCS = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
-# brief documentation of file, namespace and class members alphabetically
-# by member name. If set to NO (the default) the members will appear in
-# declaration order.
-
-SORT_BRIEF_DOCS = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
-# sorted by fully-qualified names, including namespaces. If set to
-# NO (the default), the class list will be sorted only by class name,
-# not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the
-# alphabetical list.
-
-SORT_BY_SCOPE_NAME = NO
-
-# The GENERATE_TODOLIST tag can be used to enable (YES) or
-# disable (NO) the todo list. This list is created by putting \todo
-# commands in the documentation.
-
-GENERATE_TODOLIST = YES
-
-# The GENERATE_TESTLIST tag can be used to enable (YES) or
-# disable (NO) the test list. This list is created by putting \test
-# commands in the documentation.
-
-GENERATE_TESTLIST = YES
-
-# The GENERATE_BUGLIST tag can be used to enable (YES) or
-# disable (NO) the bug list. This list is created by putting \bug
-# commands in the documentation.
-
-GENERATE_BUGLIST = YES
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
-# disable (NO) the deprecated list. This list is created by putting
-# \deprecated commands in the documentation.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional
-# documentation sections, marked by \if sectionname ... \endif.
-
-ENABLED_SECTIONS =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
-# the initial value of a variable or define consists of for it to appear in
-# the documentation. If the initializer consists of more lines than specified
-# here it will be hidden. Use a value of 0 to hide initializers completely.
-# The appearance of the initializer of individual variables and defines in the
-# documentation can be controlled using \showinitializer or \hideinitializer
-# command in the documentation regardless of this setting.
-
-MAX_INITIALIZER_LINES = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
-# at the bottom of the documentation of classes and structs. If set to YES the
-# list will mention the files that were used to generate the documentation.
-
-SHOW_USED_FILES = YES
-
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES = NO
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from the
-# version control system). Doxygen will invoke the program by executing (via
-# popen()) the command <command> <input-file>, where <command> is the value of
-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
-# provided by doxygen. Whatever the program writes to standard output
-# is used as the file version. See the manual for examples.
-
-FILE_VERSION_FILTER =
-
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated
-# by doxygen. Possible values are YES and NO. If left blank NO is used.
-
-QUIET = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated by doxygen. Possible values are YES and NO. If left blank
-# NO is used.
-
-WARNINGS = YES
-
-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
-# automatically be disabled.
-
-# XXX: In the future this should be turned on. For now it generates too much noise.
-WARN_IF_UNDOCUMENTED = NO
-
-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some
-# parameters in a documented function, or documenting parameters that
-# don't exist or using markup commands wrongly.
-
-WARN_IF_DOC_ERROR = YES
-
-# This WARN_NO_PARAMDOC option can be abled to get warnings for
-# functions that are documented, but have no documentation for their parameters
-# or return value. If set to NO (the default) doxygen will only warn about
-# wrong or incomplete parameter documentation, but not about the absence of
-# documentation.
-
-WARN_NO_PARAMDOC = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that
-# doxygen can produce. The string should contain the $file, $line, and $text
-# tags, which will be replaced by the file and line number from which the
-# warning originated and the warning text. Optionally the format may contain
-# $version, which will be replaced by the version of the file (if it could
-# be obtained via FILE_VERSION_FILTER)
-
-WARN_FORMAT = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning
-# and error messages should be written. If left blank the output is written
-# to stderr.
-
-WARN_LOGFILE =
-
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag can be used to specify the files and/or directories that contain
-# documented source files. You may enter file names like "myfile.cpp" or
-# directories like "/usr/src/myproject". Separate the files or directories
-# with spaces.
-
-INPUT = @top_srcdir@/src @top_builddir@/src
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank the following patterns are tested:
-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
-# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py
-
-FILE_PATTERNS =
-
-# The RECURSIVE tag can be used to turn specify whether or not subdirectories
-# should be searched for input files as well. Possible values are YES and NO.
-# If left blank NO is used.
-
-RECURSIVE = NO
-
-# The EXCLUDE tag can be used to specify files and/or directories that should
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-
-EXCLUDE =
-
-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
-# directories that are symbolic links (a Unix filesystem feature) are excluded
-# from the input.
-
-EXCLUDE_SYMLINKS = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories. Note that the wildcards are matched
-# against the file with absolute path, so to exclude all test directories
-# for example use the pattern */test/*
-
-EXCLUDE_PATTERNS =
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or
-# directories that contain example code fragments that are included (see
-# the \include command).
-
-EXAMPLE_PATH =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank all files are included.
-
-EXAMPLE_PATTERNS =
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude
-# commands irrespective of the value of the RECURSIVE tag.
-# Possible values are YES and NO. If left blank NO is used.
-
-EXAMPLE_RECURSIVE = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or
-# directories that contain image that are included in the documentation (see
-# the \image command).
-
-IMAGE_PATH =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command <filter> <input-file>, where <filter>
-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
-# input file. Doxygen will then use the output that the filter program writes
-# to standard output. If FILTER_PATTERNS is specified, this tag will be
-# ignored.
-
-INPUT_FILTER =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form:
-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
-# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
-# is applied to all files.
-
-FILTER_PATTERNS =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER) will be used to filter the input files when producing source
-# files to browse (i.e. when SOURCE_BROWSER is set to YES).
-
-FILTER_SOURCE_FILES = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will
-# be generated. Documented entities will be cross-referenced with these sources.
-# Note: To get rid of all source code in the generated output, make sure also
-# VERBATIM_HEADERS is set to NO.
-
-SOURCE_BROWSER = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body
-# of functions and classes directly in the documentation.
-
-INLINE_SOURCES = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
-# doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
-
-STRIP_CODE_COMMENTS = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES (the default)
-# then for each documented function all documented
-# functions referencing it will be listed.
-
-REFERENCED_BY_RELATION = YES
-
-# If the REFERENCES_RELATION tag is set to YES (the default)
-# then for each documented function all documented entities
-# called/used by that function will be listed.
-
-REFERENCES_RELATION = YES
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
-# link to the source code. Otherwise they will link to the documentstion.
-
-REFERENCES_LINK_SOURCE = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code
-# will point to the HTML generated by the htags(1) tool instead of doxygen
-# built-in source browser. The htags tool is part of GNU's global source
-# tagging system (see http://www.gnu.org/software/global/global.html). You
-# will need version 4.8.6 or higher.
-
-USE_HTAGS = NO
-
-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
-# will generate a verbatim copy of the header file for each class for
-# which an include is specified. Set to NO to disable this.
-
-VERBATIM_HEADERS = YES
-
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
-# of all compounds will be generated. Enable this if the project
-# contains a lot of classes, structs, unions or interfaces.
-
-ALPHABETICAL_INDEX = NO
-
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
-# in which this list will be split (can be a number in the range [1..20])
-
-COLS_IN_ALPHA_INDEX = 5
-
-# In case all classes in a project start with a common prefix, all
-# classes will be put under the same header in the alphabetical index.
-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
-# should be ignored while generating the index headers.
-
-IGNORE_PREFIX =
-
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
-# generate HTML output.
-
-GENERATE_HTML = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `html' will be used as the default path.
-
-HTML_OUTPUT = manual
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
-# doxygen will generate files with .html extension.
-
-HTML_FILE_EXTENSION = .html
-
-# The HTML_HEADER tag can be used to specify a personal HTML header for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard header.
-
-HTML_HEADER =
-
-# The HTML_FOOTER tag can be used to specify a personal HTML footer for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard footer.
-
-HTML_FOOTER =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
-# style sheet that is used by each HTML page. It can be used to
-# fine-tune the look of the HTML output. If the tag is left blank doxygen
-# will generate a default style sheet. Note that doxygen will try to copy
-# the style sheet file to the HTML output directory, so don't put your own
-# stylesheet in the HTML output directory as well, or it will be erased!
-
-HTML_STYLESHEET =
-
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files
-# will be generated that can be used as input for tools like the
-# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
-# of the generated HTML documentation.
-
-GENERATE_HTMLHELP = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
-# be used to specify the file name of the resulting .chm file. You
-# can add a path in front of the file if the result should not be
-# written to the html output directory.
-
-CHM_FILE =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
-# be used to specify the location (absolute path including file name) of
-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
-# the HTML help compiler on the generated index.hhp.
-
-HHC_LOCATION =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
-# controls if a separate .chi index file is generated (YES) or that
-# it should be included in the master .chm file (NO).
-
-GENERATE_CHI = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
-# controls whether a binary table of contents is generated (YES) or a
-# normal table of contents (NO) in the .chm file.
-
-BINARY_TOC = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members
-# to the contents of the HTML help documentation and to the tree view.
-
-TOC_EXPAND = NO
-
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
-# top of each HTML page. The value NO (the default) enables the index and
-# the value YES disables it.
-
-DISABLE_INDEX = NO
-
-# This tag can be used to set the number of enum values (range [1..20])
-# that doxygen will group on one line in the generated HTML documentation.
-
-ENUM_VALUES_PER_LINE = 4
-
-# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
-# generated containing a tree-like index structure (just like the one that
-# is generated for HTML Help). For this to work a browser that supports
-# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
-# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
-# probably better off using the HTML help feature.
-
-GENERATE_TREEVIEW = NO
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
-# used to set the initial width (in pixels) of the frame in which the tree
-# is shown.
-
-TREEVIEW_WIDTH = 250
-
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
-# generate Latex output.
-
-GENERATE_LATEX = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `latex' will be used as the default path.
-
-LATEX_OUTPUT = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked. If left blank `latex' will be used as the default command name.
-
-LATEX_CMD_NAME = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
-# generate index for LaTeX. If left blank `makeindex' will be used as the
-# default command name.
-
-MAKEINDEX_CMD_NAME = makeindex
-
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
-# LaTeX documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_LATEX = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used
-# by the printer. Possible values are: a4, a4wide, letter, legal and
-# executive. If left blank a4wide will be used.
-
-PAPER_TYPE = a4wide
-
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
-# packages that should be included in the LaTeX output.
-
-EXTRA_PACKAGES =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
-# the generated latex document. The header should contain everything until
-# the first chapter. If it is left blank doxygen will generate a
-# standard header. Notice: only use this tag if you know what you are doing!
-
-LATEX_HEADER =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will
-# contain links (just like the HTML output) instead of page references
-# This makes the output suitable for online browsing using a pdf viewer.
-
-PDF_HYPERLINKS = NO
-
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
-# plain latex in the generated Makefile. Set this option to YES to get a
-# higher quality PDF documentation.
-
-USE_PDFLATEX = NO
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
-# command to the generated LaTeX files. This will instruct LaTeX to keep
-# running if errors occur, instead of asking the user for help.
-# This option is also used when generating formulas in HTML.
-
-LATEX_BATCHMODE = NO
-
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not
-# include the index chapters (such as File Index, Compound Index, etc.)
-# in the output.
-
-LATEX_HIDE_INDICES = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
-# The RTF output is optimized for Word 97 and may not look very pretty with
-# other RTF readers or editors.
-
-GENERATE_RTF = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `rtf' will be used as the default path.
-
-RTF_OUTPUT = rtf
-
-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
-# RTF documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_RTF = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
-# will contain hyperlink fields. The RTF file will
-# contain links (just like the HTML output) instead of page references.
-# This makes the output suitable for online browsing using WORD or other
-# programs which support those fields.
-# Note: wordpad (write) and others do not support links.
-
-RTF_HYPERLINKS = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's
-# config file, i.e. a series of assignments. You only have to provide
-# replacements, missing definitions are set to their default value.
-
-RTF_STYLESHEET_FILE =
-
-# Set optional variables used in the generation of an rtf document.
-# Syntax is similar to doxygen's config file.
-
-RTF_EXTENSIONS_FILE =
-
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
-# generate man pages
-
-GENERATE_MAN = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `man' will be used as the default path.
-
-MAN_OUTPUT = man
-
-# The MAN_EXTENSION tag determines the extension that is added to
-# the generated man pages (default is the subroutine's section .3)
-
-MAN_EXTENSION = .3
-
-# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
-# then it will generate one additional man file for each entity
-# documented in the real man page(s). These additional files
-# only source the real man page, but without them the man command
-# would be unable to find the correct page. The default is NO.
-
-MAN_LINKS = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES Doxygen will
-# generate an XML file that captures the structure of
-# the code including all documentation.
-
-GENERATE_XML = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `xml' will be used as the default path.
-
-XML_OUTPUT = xml
-
-# The XML_SCHEMA tag can be used to specify an XML schema,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_SCHEMA =
-
-# The XML_DTD tag can be used to specify an XML DTD,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_DTD =
-
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
-# dump the program listings (including syntax highlighting
-# and cross-referencing information) to the XML output. Note that
-# enabling this will significantly increase the size of the XML output.
-
-XML_PROGRAMLISTING = YES
-
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
-# generate an AutoGen Definitions (see autogen.sf.net) file
-# that captures the structure of the code including all
-# documentation. Note that this feature is still experimental
-# and incomplete at the moment.
-
-GENERATE_AUTOGEN_DEF = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES Doxygen will
-# generate a Perl module file that captures the structure of
-# the code including all documentation. Note that this
-# feature is still experimental and incomplete at the
-# moment.
-
-GENERATE_PERLMOD = NO
-
-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
-# the necessary Makefile rules, Perl scripts and LaTeX code to be able
-# to generate PDF and DVI output from the Perl module output.
-
-PERLMOD_LATEX = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
-# nicely formatted so it can be parsed by a human reader. This is useful
-# if you want to understand what is going on. On the other hand, if this
-# tag is set to NO the size of the Perl module output will be much smaller
-# and Perl will parse it just the same.
-
-PERLMOD_PRETTY = YES
-
-# The names of the make variables in the generated doxyrules.make file
-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
-# This is useful so different doxyrules.make files included by the same
-# Makefile don't overwrite each other's variables.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
-# evaluate all C-preprocessor directives found in the sources and include
-# files.
-
-ENABLE_PREPROCESSING = YES
-
-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
-# names in the source code. If set to NO (the default) only conditional
-# compilation will be performed. Macro expansion can be done in a controlled
-# way by setting EXPAND_ONLY_PREDEF to YES.
-
-MACRO_EXPANSION = NO
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
-# then the macro expansion is limited to the macros specified with the
-# PREDEFINED and EXPAND_AS_DEFINED tags.
-
-EXPAND_ONLY_PREDEF = NO
-
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
-# in the INCLUDE_PATH (see below) will be search if a #include is found.
-
-SEARCH_INCLUDES = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by
-# the preprocessor.
-
-INCLUDE_PATH =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will
-# be used.
-
-INCLUDE_FILE_PATTERNS =
-
-# The PREDEFINED tag can be used to specify one or more macro names that
-# are defined before the preprocessor is started (similar to the -D option of
-# gcc). The argument of the tag is a list of macros of the form: name
-# or name=definition (no spaces). If the definition and the = are
-# omitted =1 is assumed. To prevent a macro definition from being
-# undefined via #undef or recursively expanded use the := operator
-# instead of the = operator.
-
-PREDEFINED =
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
-# this tag can be used to specify a list of macro names that should be expanded.
-# The macro definition that is found in the sources will be used.
-# Use the PREDEFINED tag if you want to use a different macro definition.
-
-EXPAND_AS_DEFINED =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
-# doxygen's preprocessor will remove all function-like macros that are alone
-# on a line, have an all uppercase name, and do not end with a semicolon. Such
-# function macros are typically used for boiler-plate code, and will confuse
-# the parser if not removed.
-
-SKIP_FUNCTION_MACROS = YES
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES option can be used to specify one or more tagfiles.
-# Optionally an initial location of the external documentation
-# can be added for each tagfile. The format of a tag file without
-# this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where "loc1" and "loc2" can be relative or absolute paths or
-# URLs. If a location is present for each tag, the installdox tool
-# does not have to be run to correct the links.
-# Note that each tag file must have a unique name
-# (where the name does NOT include the path)
-# If a tag file is not located in the directory in which doxygen
-# is run, you must also specify the path to the tagfile here.
-
-TAGFILES =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create
-# a tag file that is based on the input files it reads.
-
-GENERATE_TAGFILE =
-
-# If the ALLEXTERNALS tag is set to YES all external classes will be listed
-# in the class index. If set to NO only the inherited external classes
-# will be listed.
-
-ALLEXTERNALS = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
-# in the modules index. If set to NO, only the current project's groups will
-# be listed.
-
-EXTERNAL_GROUPS = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of `which perl').
-
-PERL_PATH = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
-# or super classes. Setting the tag to NO turns the diagrams off. Note that
-# this option is superseded by the HAVE_DOT option below. This is only a
-# fallback. It is recommended to install and use dot, since it yields more
-# powerful graphs.
-
-CLASS_DIAGRAMS = YES
-
-# If set to YES, the inheritance and collaboration graphs will hide
-# inheritance and usage relations if the target is undocumented
-# or is not a class.
-
-HIDE_UNDOC_RELATIONS = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz, a graph visualization
-# toolkit from AT&T and Lucent Bell Labs. The other options in this section
-# have no effect if this option is set to NO (the default)
-
-HAVE_DOT = YES
-
-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect inheritance relations. Setting this tag to YES will force the
-# the CLASS_DIAGRAMS tag to NO.
-
-CLASS_GRAPH = YES
-
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect implementation dependencies (inheritance, containment, and
-# class references variables) of the class with other documented classes.
-
-COLLABORATION_GRAPH = YES
-
-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for groups, showing the direct groups dependencies
-
-GROUP_GRAPHS = YES
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-
-UML_LOOK = NO
-
-# If set to YES, the inheritance and collaboration graphs will show the
-# relations between templates and their instances.
-
-TEMPLATE_RELATIONS = NO
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
-# tags are set to YES then doxygen will generate a graph for each documented
-# file showing the direct and indirect include dependencies of the file with
-# other documented files.
-
-INCLUDE_GRAPH = YES
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
-# documented header file showing the documented files that directly or
-# indirectly include this file.
-
-INCLUDED_BY_GRAPH = YES
-
-# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
-# generate a call dependency graph for every global function or class method.
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-
-CALL_GRAPH = NO
-
-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then doxygen will
-# generate a caller dependency graph for every global function or class method.
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-
-CALLER_GRAPH = NO
-
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
-# will graphical hierarchy of all classes instead of a textual one.
-
-GRAPHICAL_HIERARCHY = YES
-
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
-# then doxygen will show the dependencies a directory has on other directories
-# in a graphical way. The dependency relations are determined by the #include
-# relations between the files in the directories.
-
-DIRECTORY_GRAPH = YES
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot. Possible values are png, jpg, or gif
-# If left blank png will be used.
-
-DOT_IMAGE_FORMAT = png
-
-# The tag DOT_PATH can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-
-DOT_PATH =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the
-# \dotfile command).
-
-DOTFILE_DIRS =
-
-# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
-# (in pixels) of the graphs generated by dot. If a graph becomes larger than
-# this value, doxygen will try to truncate the graph, so that it fits within
-# the specified constraint. Beware that most browsers cannot cope with very
-# large images.
-
-MAX_DOT_GRAPH_WIDTH = 1024
-
-# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
-# (in pixels) of the graphs generated by dot. If a graph becomes larger than
-# this value, doxygen will try to truncate the graph, so that it fits within
-# the specified constraint. Beware that most browsers cannot cope with very
-# large images.
-
-MAX_DOT_GRAPH_HEIGHT = 1024
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
-# graphs generated by dot. A depth value of 3 means that only nodes reachable
-# from the root by following a path via at most 3 edges will be shown. Nodes
-# that lay further from the root node will be omitted. Note that setting this
-# option to 1 or 2 may greatly reduce the computation time needed for large
-# code bases. Also note that a graph may be further truncated if the graph's
-# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH
-# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),
-# the graph is not depth-constrained.
-
-MAX_DOT_GRAPH_DEPTH = 0
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, which results in a white background.
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-
-DOT_TRANSPARENT = NO
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10)
-# support this, this feature is disabled by default.
-
-DOT_MULTI_TARGETS = NO
-
-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
-# generate a legend page explaining the meaning of the various boxes and
-# arrows in the dot generated graphs.
-
-GENERATE_LEGEND = YES
-
-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
-# remove the intermediate dot files that are used to generate
-# the various graphs.
-
-DOT_CLEANUP = YES
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to the search engine
-#---------------------------------------------------------------------------
-
-# The SEARCHENGINE tag specifies whether or not a search engine should be
-# used. If set to NO the values of all tags below this one will be ignored.
-
-SEARCHENGINE = NO
+# Doxyfile 1.5.0 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" ") + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded +# by quotes) that should identify the project. + +PROJECT_NAME = "XCB" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = @VERSION@ + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = @top_builddir@/doc + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian, +# Italian, Japanese, Japanese-en (Japanese with English messages), Korean, +# Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, +# Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian. + +OUTPUT_LANGUAGE = English + +# This tag can be used to specify the encoding used in the generated output. +# The encoding is not always determined by the language that is chosen, +# but also whether or not the output is meant for Windows or non-Windows users. +# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES +# forces the Windows encoding (this is the default for the Windows binary), +# whereas setting the tag to NO uses a Unix-style encoding (the default for +# all platforms other than Windows). + +USE_WINDOWS_ENCODING = NO + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = NO + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful is your file systems +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like the Qt-style comments (thus requiring an +# explicit @brief command for a brief description. + +JAVADOC_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the DETAILS_AT_TOP tag is set to YES then Doxygen +# will output the detailed description near the top, like JavaDoc. +# If set to NO, the detailed description appears after the member +# documentation. + +DETAILS_AT_TOP = NO + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 8 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for Java. +# For instance, namespaces will be presented as packages, qualified scopes +# will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to +# include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + +BUILTIN_STL_SUPPORT = NO + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + +CASE_SENSE_NAMES = YES + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or define consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and defines in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +# If the sources in your project are distributed over multiple directories +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +# in the documentation. The default is NO. + +SHOW_DIRECTORIES = NO + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from the +# version control system). Doxygen will invoke the program by executing (via +# popen()) the command <command> <input-file>, where <command> is the value of +# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = YES + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +# XXX: In the future this should be turned on. For now it generates too much noise. +WARN_IF_UNDOCUMENTED = NO + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be abled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = YES + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = @top_srcdir@/src @top_builddir@/src + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx +# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py + +FILE_PATTERNS = + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = NO + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or +# directories that are symbolic links (a Unix filesystem feature) are excluded +# from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command <filter> <input-file>, where <filter> +# is the value of the INPUT_FILTER tag, and <input-file> is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. If FILTER_PATTERNS is specified, this tag will be +# ignored. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER +# is applied to all files. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES (the default) +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = YES + +# If the REFERENCES_RELATION tag is set to YES (the default) +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = YES + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. Otherwise they will link to the documentstion. + +REFERENCES_LINK_SOURCE = YES + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = NO + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = manual + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + +DISABLE_INDEX = NO + +# This tag can be used to set the number of enum values (range [1..20]) +# that doxygen will group on one line in the generated HTML documentation. + +ENUM_VALUES_PER_LINE = 4 + +# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be +# generated containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, +# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are +# probably better off using the HTML help feature. + +GENERATE_TREEVIEW = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, a4wide, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = NO + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = NO + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. This is useful +# if you want to understand what is going on. On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = NO + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_DEFINED tags. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# in the INCLUDE_PATH (see below) will be search if a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. + +PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all function-like macros that are alone +# on a line, have an all uppercase name, and do not end with a semicolon. Such +# function macros are typically used for boiler-plate code, and will confuse +# the parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option is superseded by the HAVE_DOT option below. This is only a +# fallback. It is recommended to install and use dot, since it yields more +# powerful graphs. + +CLASS_DIAGRAMS = YES + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = YES + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# the CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will +# generate a call dependency graph for every global function or class method. +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected +# functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then doxygen will +# generate a caller dependency graph for every global function or class method. +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable caller graphs for selected +# functions only using the \callergraph command. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are png, jpg, or gif +# If left blank png will be used. + +DOT_IMAGE_FORMAT = png + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width +# (in pixels) of the graphs generated by dot. If a graph becomes larger than +# this value, doxygen will try to truncate the graph, so that it fits within +# the specified constraint. Beware that most browsers cannot cope with very +# large images. + +MAX_DOT_GRAPH_WIDTH = 1024 + +# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height +# (in pixels) of the graphs generated by dot. If a graph becomes larger than +# this value, doxygen will try to truncate the graph, so that it fits within +# the specified constraint. Beware that most browsers cannot cope with very +# large images. + +MAX_DOT_GRAPH_HEIGHT = 1024 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that a graph may be further truncated if the graph's +# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH +# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default), +# the graph is not depth-constrained. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, which results in a white background. +# Warning: Depending on the platform used, enabling this option may lead to +# badly anti-aliased labels on the edges of a graph (i.e. they become hard to +# read). + +DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to the search engine +#--------------------------------------------------------------------------- + +# The SEARCHENGINE tag specifies whether or not a search engine should be +# used. If set to NO the values of all tags below this one will be ignored. + +SEARCHENGINE = NO diff --git a/libxcb/src/xcb_windefs.h b/libxcb/src/xcb_windefs.h index a8e9524d6..d6c732940 100644 --- a/libxcb/src/xcb_windefs.h +++ b/libxcb/src/xcb_windefs.h @@ -1,45 +1,45 @@ -/* Copyright (C) 2009 Jatin Golani.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * Except as contained in this notice, the names of the authors or their
- * institutions shall not be used in advertising or otherwise to promote the
- * sale, use or other dealings in this Software without prior written
- * authorization from the authors.
- */
-
-
-#ifndef _XCB_WINDEFS_H
-#define _XCB_WINDEFS_H
-
-#ifndef WINVER
-#define WINVER 0x0501 /* required for getaddrinfo/freeaddrinfo defined only for WinXP and above */
-#endif
-
-#include <winsock2.h>
-#include <ws2tcpip.h>
-#include <windef.h>
-
-struct iovec {
- void *iov_base; /* Pointer to data. */
- int iov_len; /* Length of data. */
-};
-
-typedef unsigned int in_addr_t;
-
-#endif /* xcb_windefs.h */
+/* Copyright (C) 2009 Jatin Golani. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * Except as contained in this notice, the names of the authors or their + * institutions shall not be used in advertising or otherwise to promote the + * sale, use or other dealings in this Software without prior written + * authorization from the authors. + */ + + +#ifndef _XCB_WINDEFS_H +#define _XCB_WINDEFS_H + +#ifndef WINVER +#define WINVER 0x0501 /* required for getaddrinfo/freeaddrinfo defined only for WinXP and above */ +#endif + +#include <winsock2.h> +#include <ws2tcpip.h> +#include <windef.h> + +struct iovec { + void *iov_base; /* Pointer to data. */ + int iov_len; /* Length of data. */ +}; + +typedef unsigned int in_addr_t; + +#endif /* xcb_windefs.h */ diff --git a/libxcb/tests/.gitignore b/libxcb/tests/.gitignore index 58b019a02..9d27cc57b 100644 --- a/libxcb/tests/.gitignore +++ b/libxcb/tests/.gitignore @@ -1,3 +1,3 @@ -CheckLog.html
-CheckLog_xcb.xml
-check_all
+CheckLog.html +CheckLog_xcb.xml +check_all diff --git a/libxcb/tests/CheckLog.xsl b/libxcb/tests/CheckLog.xsl index 75b14e694..3daebaa5d 100644 --- a/libxcb/tests/CheckLog.xsl +++ b/libxcb/tests/CheckLog.xsl @@ -1,104 +1,104 @@ -<?xml version="1.0" encoding="UTF-8"?>
-
-<xsl:stylesheet
- version="1.0"
- xmlns:check="http://check.sourceforge.net/ns"
- xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
- xmlns="http://www.w3.org/TR/REC-html40">
-
-<xsl:output method="html"/>
-
-<xsl:template match="/">
-<html>
- <head>
- <title>Test Suite Results</title>
- </head>
-
- <body>
- <xsl:apply-templates/>
- </body>
-</html>
-</xsl:template>
-
-<xsl:template match="datetime">
- <xsl:apply-templates/>
-</xsl:template>
-
-<xsl:template match="duration">
- <xsl:apply-templates/>
-</xsl:template>
-
-<xsl:template match="check:suite">
- <xsl:apply-templates select="check:title"/>
- <center>
- <table width="80%" border="1">
- <thead>
- <tr>
- <td>Test Path</td>
- <td>Test Function Location</td>
- <td>C Identifier</td>
- <td>Test Case</td>
- <td>Result</td>
- </tr>
- </thead>
- <tbody>
- <xsl:apply-templates select="check:test"/>
- </tbody>
- </table>
- </center>
-</xsl:template>
-
-<xsl:template match="check:testsuites">
- <xsl:apply-templates select="check:suite"/>
- <h3>Unit Test Statistics</h3>
- <ul>
- <li>date/time: <xsl:apply-templates select="check:datetime"/></li>
- <li>duration: <xsl:apply-templates select="check:duration"/></li>
- </ul>
- <hr></hr>
-</xsl:template>
-
-<xsl:template match="check:title">
- <h2>Test Suite: <xsl:apply-templates/></h2>
-</xsl:template>
-
-<xsl:template match="check:test[@result='success']">
- <tr bgcolor="lime">
- <xsl:apply-templates/>
- </tr>
-</xsl:template>
-
-<xsl:template match="check:test[@result='failure']">
- <tr bgcolor="red">
- <xsl:apply-templates/>
- </tr>
-</xsl:template>
-
-<xsl:template match="check:test[@result='error']">
- <tr bgcolor="yellow">
- <xsl:apply-templates/>
- </tr>
-</xsl:template>
-
-<xsl:template match="check:path">
- <td><xsl:apply-templates/></td>
-</xsl:template>
-
-<xsl:template match="check:fn">
- <td><xsl:apply-templates/></td>
-</xsl:template>
-
-<xsl:template match="check:id">
- <td><xsl:apply-templates/></td>
-</xsl:template>
-
-<xsl:template match="check:description">
- <td><xsl:apply-templates/></td>
-</xsl:template>
-
-<xsl:template match="check:message">
- <td><xsl:apply-templates/></td>
-</xsl:template>
-
-</xsl:stylesheet>
-
+<?xml version="1.0" encoding="UTF-8"?> + +<xsl:stylesheet + version="1.0" + xmlns:check="http://check.sourceforge.net/ns" + xmlns:xsl="http://www.w3.org/1999/XSL/Transform" + xmlns="http://www.w3.org/TR/REC-html40"> + +<xsl:output method="html"/> + +<xsl:template match="/"> +<html> + <head> + <title>Test Suite Results</title> + </head> + + <body> + <xsl:apply-templates/> + </body> +</html> +</xsl:template> + +<xsl:template match="datetime"> + <xsl:apply-templates/> +</xsl:template> + +<xsl:template match="duration"> + <xsl:apply-templates/> +</xsl:template> + +<xsl:template match="check:suite"> + <xsl:apply-templates select="check:title"/> + <center> + <table width="80%" border="1"> + <thead> + <tr> + <td>Test Path</td> + <td>Test Function Location</td> + <td>C Identifier</td> + <td>Test Case</td> + <td>Result</td> + </tr> + </thead> + <tbody> + <xsl:apply-templates select="check:test"/> + </tbody> + </table> + </center> +</xsl:template> + +<xsl:template match="check:testsuites"> + <xsl:apply-templates select="check:suite"/> + <h3>Unit Test Statistics</h3> + <ul> + <li>date/time: <xsl:apply-templates select="check:datetime"/></li> + <li>duration: <xsl:apply-templates select="check:duration"/></li> + </ul> + <hr></hr> +</xsl:template> + +<xsl:template match="check:title"> + <h2>Test Suite: <xsl:apply-templates/></h2> +</xsl:template> + +<xsl:template match="check:test[@result='success']"> + <tr bgcolor="lime"> + <xsl:apply-templates/> + </tr> +</xsl:template> + +<xsl:template match="check:test[@result='failure']"> + <tr bgcolor="red"> + <xsl:apply-templates/> + </tr> +</xsl:template> + +<xsl:template match="check:test[@result='error']"> + <tr bgcolor="yellow"> + <xsl:apply-templates/> + </tr> +</xsl:template> + +<xsl:template match="check:path"> + <td><xsl:apply-templates/></td> +</xsl:template> + +<xsl:template match="check:fn"> + <td><xsl:apply-templates/></td> +</xsl:template> + +<xsl:template match="check:id"> + <td><xsl:apply-templates/></td> +</xsl:template> + +<xsl:template match="check:description"> + <td><xsl:apply-templates/></td> +</xsl:template> + +<xsl:template match="check:message"> + <td><xsl:apply-templates/></td> +</xsl:template> + +</xsl:stylesheet> + diff --git a/libxcb/tests/Makefile.am b/libxcb/tests/Makefile.am index 93fd03d9b..077681e51 100644 --- a/libxcb/tests/Makefile.am +++ b/libxcb/tests/Makefile.am @@ -1,32 +1,32 @@ -########################
-## tests/Makefile.am
-########################
-SUBDIRS =
-EXTRA_DIST = CheckLog.xsl
-AM_MAKEFLAGS = -k
-AM_CFLAGS = -Wall -Werror @CHECK_CFLAGS@ -I$(top_srcdir)/src
-LDADD = @CHECK_LIBS@ $(top_builddir)/src/libxcb.la
-
-if HAVE_CHECK
-TESTS = check_all
-check_PROGRAMS = check_all
-check_all_SOURCES = check_all.c check_suites.h check_public.c
-
-all-local::
- $(RM) CheckLog*.xml
-
-check-local: check-TESTS
- $(RM) CheckLog.html
- if test x$(HTML_CHECK_RESULT) = xtrue; then \
- $(XSLTPROC) $(srcdir)/CheckLog.xsl CheckLog*.xml > CheckLog.html; \
- else \
- touch CheckLog.html; \
- fi
-
-CheckLog.html: $(check_PROGRAMS)
- $(MAKE) $(AM_MAKEFLAGS) check;
-
-endif
-
-clean-local::
- $(RM) CheckLog.html CheckLog*.txt CheckLog*.xml
+######################## +## tests/Makefile.am +######################## +SUBDIRS = +EXTRA_DIST = CheckLog.xsl +AM_MAKEFLAGS = -k +AM_CFLAGS = -Wall -Werror @CHECK_CFLAGS@ -I$(top_srcdir)/src +LDADD = @CHECK_LIBS@ $(top_builddir)/src/libxcb.la + +if HAVE_CHECK +TESTS = check_all +check_PROGRAMS = check_all +check_all_SOURCES = check_all.c check_suites.h check_public.c + +all-local:: + $(RM) CheckLog*.xml + +check-local: check-TESTS + $(RM) CheckLog.html + if test x$(HTML_CHECK_RESULT) = xtrue; then \ + $(XSLTPROC) $(srcdir)/CheckLog.xsl CheckLog*.xml > CheckLog.html; \ + else \ + touch CheckLog.html; \ + fi + +CheckLog.html: $(check_PROGRAMS) + $(MAKE) $(AM_MAKEFLAGS) check; + +endif + +clean-local:: + $(RM) CheckLog.html CheckLog*.txt CheckLog*.xml diff --git a/libxcb/tests/check_all.c b/libxcb/tests/check_all.c index 8c7887dd9..4393422e3 100644 --- a/libxcb/tests/check_all.c +++ b/libxcb/tests/check_all.c @@ -1,20 +1,20 @@ -#include <stdlib.h>
-#include "check_suites.h"
-
-void suite_add_test(Suite *s, TFun tf, const char *name)
-{
- TCase *tc = tcase_create(name);
- tcase_add_test(tc, tf);
- suite_add_tcase(s, tc);
-}
-
-int main(void)
-{
- int nf;
- SRunner *sr = srunner_create(public_suite());
- srunner_set_xml(sr, "CheckLog_xcb.xml");
- srunner_run_all(sr, CK_NORMAL);
- nf = srunner_ntests_failed(sr);
- srunner_free(sr);
- return (nf == 0) ? EXIT_SUCCESS : EXIT_FAILURE;
-}
+#include <stdlib.h> +#include "check_suites.h" + +void suite_add_test(Suite *s, TFun tf, const char *name) +{ + TCase *tc = tcase_create(name); + tcase_add_test(tc, tf); + suite_add_tcase(s, tc); +} + +int main(void) +{ + int nf; + SRunner *sr = srunner_create(public_suite()); + srunner_set_xml(sr, "CheckLog_xcb.xml"); + srunner_run_all(sr, CK_NORMAL); + nf = srunner_ntests_failed(sr); + srunner_free(sr); + return (nf == 0) ? EXIT_SUCCESS : EXIT_FAILURE; +} diff --git a/libxcb/tests/check_public.c b/libxcb/tests/check_public.c index c77c6917d..2094bfef1 100644 --- a/libxcb/tests/check_public.c +++ b/libxcb/tests/check_public.c @@ -1,218 +1,218 @@ -#include <check.h>
-#include <string.h>
-#include <stdlib.h>
-#include "check_suites.h"
-#include "xcb.h"
-#include "xcbext.h"
-
-/* xcb_parse_display tests {{{ */
-
-typedef enum test_type_t {
- TEST_ARGUMENT, TEST_ENVIRONMENT, TEST_END
-} test_type_t;
-static const char *const test_string[] = { "", "via $DISPLAY " };
-
-static void parse_display_pass(const char *name, const char *host, const int display, const int screen)
-{
- int success;
- char *got_host;
- int got_display, got_screen;
- const char *argument = 0;
- test_type_t test_type;
-
- for(test_type = TEST_ARGUMENT; test_type != TEST_END; test_type++)
- {
- if(test_type == TEST_ARGUMENT)
- {
- argument = name;
- putenv("DISPLAY=");
- }
- else if(test_type == TEST_ENVIRONMENT)
- {
- argument = 0;
- setenv("DISPLAY", name, 1);
- }
-
- got_host = (char *) -1;
- got_display = got_screen = -42;
- mark_point();
- success = xcb_parse_display(argument, &got_host, &got_display, &got_screen);
- fail_unless(success, "unexpected parse failure %sfor '%s'", test_string[test_type], name);
- fail_unless(strcmp(host, got_host) == 0, "parse %sproduced unexpected hostname '%s' for '%s': expected '%s'", test_string[test_type], got_host, name, host);
- fail_unless(display == got_display, "parse %sproduced unexpected display '%d' for '%s': expected '%d'", test_string[test_type], got_display, name, display);
- fail_unless(screen == got_screen, "parse %sproduced unexpected screen '%d' for '%s': expected '%d'", test_string[test_type], got_screen, name, screen);
-
- got_host = (char *) -1;
- got_display = got_screen = -42;
- mark_point();
- success = xcb_parse_display(argument, &got_host, &got_display, 0);
- fail_unless(success, "unexpected screenless parse failure %sfor '%s'", test_string[test_type], name);
- fail_unless(strcmp(host, got_host) == 0, "screenless parse %sproduced unexpected hostname '%s' for '%s': expected '%s'", test_string[test_type], got_host, name, host);
- fail_unless(display == got_display, "screenless parse %sproduced unexpected display '%d' for '%s': expected '%d'", test_string[test_type], got_display, name, display);
- }
- putenv("DISPLAY=");
-}
-
-static void parse_display_fail(const char *name)
-{
- int success;
- char *got_host;
- int got_display, got_screen;
- const char *argument = 0;
- test_type_t test_type;
-
- for(test_type = TEST_ARGUMENT; test_type != TEST_END; test_type++)
- {
- if(test_type == TEST_ARGUMENT)
- {
- argument = name;
- putenv("DISPLAY=");
- }
- else if(test_type == TEST_ENVIRONMENT)
- {
- if (!name) break;
- argument = 0;
- setenv("DISPLAY", name, 1);
- }
-
- got_host = (char *) -1;
- got_display = got_screen = -42;
- mark_point();
- success = xcb_parse_display(argument, &got_host, &got_display, &got_screen);
- fail_unless(!success, "unexpected parse success %sfor '%s'", test_string[test_type], name);
- fail_unless(got_host == (char *) -1, "host changed on parse failure %sfor '%s': got %p", test_string[test_type], name, got_host);
- fail_unless(got_display == -42, "display changed on parse failure %sfor '%s': got %d", test_string[test_type], name, got_display);
- fail_unless(got_screen == -42, "screen changed on parse failure %sfor '%s': got %d", test_string[test_type], name, got_screen);
-
- got_host = (char *) -1;
- got_display = got_screen = -42;
- mark_point();
- success = xcb_parse_display(argument, &got_host, &got_display, 0);
- fail_unless(!success, "unexpected screenless parse success %sfor '%s'", test_string[test_type], name);
- fail_unless(got_host == (char *) -1, "host changed on parse failure %sfor '%s': got %p", test_string[test_type], name, got_host);
- fail_unless(got_display == -42, "display changed on parse failure %sfor '%s': got %d", test_string[test_type], name, got_display);
- }
- putenv("DISPLAY=");
-}
-
-START_TEST(parse_display_unix)
-{
- parse_display_pass(":0", "", 0, 0);
- parse_display_pass(":1", "", 1, 0);
- parse_display_pass(":0.1", "", 0, 1);
-}
-END_TEST
-
-START_TEST(parse_display_ip)
-{
- parse_display_pass("x.org:0", "x.org", 0, 0);
- parse_display_pass("expo:0", "expo", 0, 0);
- parse_display_pass("bigmachine:1", "bigmachine", 1, 0);
- parse_display_pass("hydra:0.1", "hydra", 0, 1);
-}
-END_TEST
-
-START_TEST(parse_display_ipv4)
-{
- parse_display_pass("198.112.45.11:0", "198.112.45.11", 0, 0);
- parse_display_pass("198.112.45.11:0.1", "198.112.45.11", 0, 1);
-}
-END_TEST
-
-START_TEST(parse_display_ipv6)
-{
- parse_display_pass(":::0", "::", 0, 0);
- parse_display_pass("1:::0", "1::", 0, 0);
- parse_display_pass("::1:0", "::1", 0, 0);
- parse_display_pass("::1:0.1", "::1", 0, 1);
- parse_display_pass("::127.0.0.1:0", "::127.0.0.1", 0, 0);
- parse_display_pass("::ffff:127.0.0.1:0", "::ffff:127.0.0.1", 0, 0);
- parse_display_pass("2002:83fc:d052::1:0", "2002:83fc:d052::1", 0, 0);
- parse_display_pass("2002:83fc:d052::1:0.1", "2002:83fc:d052::1", 0, 1);
- parse_display_pass("[::]:0", "[::]", 0, 0);
- parse_display_pass("[1::]:0", "[1::]", 0, 0);
- parse_display_pass("[::1]:0", "[::1]", 0, 0);
- parse_display_pass("[::1]:0.1", "[::1]", 0, 1);
- parse_display_pass("[::127.0.0.1]:0", "[::127.0.0.1]", 0, 0);
- parse_display_pass("[::ffff:127.0.0.1]:0", "[::ffff:127.0.0.1]", 0, 0);
- parse_display_pass("[2002:83fc:d052::1]:0", "[2002:83fc:d052::1]", 0, 0);
- parse_display_pass("[2002:83fc:d052::1]:0.1", "[2002:83fc:d052::1]", 0, 1);
-}
-END_TEST
-
-START_TEST(parse_display_decnet)
-{
- parse_display_pass("myws::0", "myws:", 0, 0);
- parse_display_pass("big::1", "big:", 1, 0);
- parse_display_pass("hydra::0.1", "hydra:", 0, 1);
-}
-END_TEST
-
-START_TEST(parse_display_negative)
-{
- parse_display_fail(0);
- parse_display_fail("");
- parse_display_fail(":");
- parse_display_fail("::");
- parse_display_fail(":::");
- parse_display_fail(":.");
- parse_display_fail(":a");
- parse_display_fail(":a.");
- parse_display_fail(":0.");
- parse_display_fail(":.a");
- parse_display_fail(":.0");
- parse_display_fail(":0.a");
- parse_display_fail(":0.0.");
-
- parse_display_fail("127.0.0.1");
- parse_display_fail("127.0.0.1:");
- parse_display_fail("127.0.0.1::");
- parse_display_fail("::127.0.0.1");
- parse_display_fail("::127.0.0.1:");
- parse_display_fail("::127.0.0.1::");
- parse_display_fail("::ffff:127.0.0.1");
- parse_display_fail("::ffff:127.0.0.1:");
- parse_display_fail("::ffff:127.0.0.1::");
- parse_display_fail("localhost");
- parse_display_fail("localhost:");
- parse_display_fail("localhost::");
-}
-END_TEST
-
-/* }}} */
-
-static void popcount_eq(uint32_t bits, int count)
-{
- fail_unless(xcb_popcount(bits) == count, "unexpected popcount(%08x) != %d", bits, count);
-}
-
-START_TEST(popcount)
-{
- uint32_t mask;
- int count;
-
- for (mask = 0xffffffff, count = 32; count >= 0; mask >>= 1, --count) {
- popcount_eq(mask, count);
- }
- for (mask = 0x80000000; mask; mask >>= 1) {
- popcount_eq(mask, 1);
- }
- for (mask = 0x80000000; mask > 1; mask >>= 1) {
- popcount_eq(mask | 1, 2);
- }
-}
-END_TEST
-
-Suite *public_suite(void)
-{
- Suite *s = suite_create("Public API");
- putenv("DISPLAY=");
- suite_add_test(s, parse_display_unix, "xcb_parse_display unix");
- suite_add_test(s, parse_display_ip, "xcb_parse_display ip");
- suite_add_test(s, parse_display_ipv4, "xcb_parse_display ipv4");
- suite_add_test(s, parse_display_ipv6, "xcb_parse_display ipv6");
- suite_add_test(s, parse_display_decnet, "xcb_parse_display decnet");
- suite_add_test(s, parse_display_negative, "xcb_parse_display negative");
- suite_add_test(s, popcount, "xcb_popcount");
- return s;
-}
+#include <check.h> +#include <string.h> +#include <stdlib.h> +#include "check_suites.h" +#include "xcb.h" +#include "xcbext.h" + +/* xcb_parse_display tests {{{ */ + +typedef enum test_type_t { + TEST_ARGUMENT, TEST_ENVIRONMENT, TEST_END +} test_type_t; +static const char *const test_string[] = { "", "via $DISPLAY " }; + +static void parse_display_pass(const char *name, const char *host, const int display, const int screen) +{ + int success; + char *got_host; + int got_display, got_screen; + const char *argument = 0; + test_type_t test_type; + + for(test_type = TEST_ARGUMENT; test_type != TEST_END; test_type++) + { + if(test_type == TEST_ARGUMENT) + { + argument = name; + putenv("DISPLAY="); + } + else if(test_type == TEST_ENVIRONMENT) + { + argument = 0; + setenv("DISPLAY", name, 1); + } + + got_host = (char *) -1; + got_display = got_screen = -42; + mark_point(); + success = xcb_parse_display(argument, &got_host, &got_display, &got_screen); + fail_unless(success, "unexpected parse failure %sfor '%s'", test_string[test_type], name); + fail_unless(strcmp(host, got_host) == 0, "parse %sproduced unexpected hostname '%s' for '%s': expected '%s'", test_string[test_type], got_host, name, host); + fail_unless(display == got_display, "parse %sproduced unexpected display '%d' for '%s': expected '%d'", test_string[test_type], got_display, name, display); + fail_unless(screen == got_screen, "parse %sproduced unexpected screen '%d' for '%s': expected '%d'", test_string[test_type], got_screen, name, screen); + + got_host = (char *) -1; + got_display = got_screen = -42; + mark_point(); + success = xcb_parse_display(argument, &got_host, &got_display, 0); + fail_unless(success, "unexpected screenless parse failure %sfor '%s'", test_string[test_type], name); + fail_unless(strcmp(host, got_host) == 0, "screenless parse %sproduced unexpected hostname '%s' for '%s': expected '%s'", test_string[test_type], got_host, name, host); + fail_unless(display == got_display, "screenless parse %sproduced unexpected display '%d' for '%s': expected '%d'", test_string[test_type], got_display, name, display); + } + putenv("DISPLAY="); +} + +static void parse_display_fail(const char *name) +{ + int success; + char *got_host; + int got_display, got_screen; + const char *argument = 0; + test_type_t test_type; + + for(test_type = TEST_ARGUMENT; test_type != TEST_END; test_type++) + { + if(test_type == TEST_ARGUMENT) + { + argument = name; + putenv("DISPLAY="); + } + else if(test_type == TEST_ENVIRONMENT) + { + if (!name) break; + argument = 0; + setenv("DISPLAY", name, 1); + } + + got_host = (char *) -1; + got_display = got_screen = -42; + mark_point(); + success = xcb_parse_display(argument, &got_host, &got_display, &got_screen); + fail_unless(!success, "unexpected parse success %sfor '%s'", test_string[test_type], name); + fail_unless(got_host == (char *) -1, "host changed on parse failure %sfor '%s': got %p", test_string[test_type], name, got_host); + fail_unless(got_display == -42, "display changed on parse failure %sfor '%s': got %d", test_string[test_type], name, got_display); + fail_unless(got_screen == -42, "screen changed on parse failure %sfor '%s': got %d", test_string[test_type], name, got_screen); + + got_host = (char *) -1; + got_display = got_screen = -42; + mark_point(); + success = xcb_parse_display(argument, &got_host, &got_display, 0); + fail_unless(!success, "unexpected screenless parse success %sfor '%s'", test_string[test_type], name); + fail_unless(got_host == (char *) -1, "host changed on parse failure %sfor '%s': got %p", test_string[test_type], name, got_host); + fail_unless(got_display == -42, "display changed on parse failure %sfor '%s': got %d", test_string[test_type], name, got_display); + } + putenv("DISPLAY="); +} + +START_TEST(parse_display_unix) +{ + parse_display_pass(":0", "", 0, 0); + parse_display_pass(":1", "", 1, 0); + parse_display_pass(":0.1", "", 0, 1); +} +END_TEST + +START_TEST(parse_display_ip) +{ + parse_display_pass("x.org:0", "x.org", 0, 0); + parse_display_pass("expo:0", "expo", 0, 0); + parse_display_pass("bigmachine:1", "bigmachine", 1, 0); + parse_display_pass("hydra:0.1", "hydra", 0, 1); +} +END_TEST + +START_TEST(parse_display_ipv4) +{ + parse_display_pass("198.112.45.11:0", "198.112.45.11", 0, 0); + parse_display_pass("198.112.45.11:0.1", "198.112.45.11", 0, 1); +} +END_TEST + +START_TEST(parse_display_ipv6) +{ + parse_display_pass(":::0", "::", 0, 0); + parse_display_pass("1:::0", "1::", 0, 0); + parse_display_pass("::1:0", "::1", 0, 0); + parse_display_pass("::1:0.1", "::1", 0, 1); + parse_display_pass("::127.0.0.1:0", "::127.0.0.1", 0, 0); + parse_display_pass("::ffff:127.0.0.1:0", "::ffff:127.0.0.1", 0, 0); + parse_display_pass("2002:83fc:d052::1:0", "2002:83fc:d052::1", 0, 0); + parse_display_pass("2002:83fc:d052::1:0.1", "2002:83fc:d052::1", 0, 1); + parse_display_pass("[::]:0", "[::]", 0, 0); + parse_display_pass("[1::]:0", "[1::]", 0, 0); + parse_display_pass("[::1]:0", "[::1]", 0, 0); + parse_display_pass("[::1]:0.1", "[::1]", 0, 1); + parse_display_pass("[::127.0.0.1]:0", "[::127.0.0.1]", 0, 0); + parse_display_pass("[::ffff:127.0.0.1]:0", "[::ffff:127.0.0.1]", 0, 0); + parse_display_pass("[2002:83fc:d052::1]:0", "[2002:83fc:d052::1]", 0, 0); + parse_display_pass("[2002:83fc:d052::1]:0.1", "[2002:83fc:d052::1]", 0, 1); +} +END_TEST + +START_TEST(parse_display_decnet) +{ + parse_display_pass("myws::0", "myws:", 0, 0); + parse_display_pass("big::1", "big:", 1, 0); + parse_display_pass("hydra::0.1", "hydra:", 0, 1); +} +END_TEST + +START_TEST(parse_display_negative) +{ + parse_display_fail(0); + parse_display_fail(""); + parse_display_fail(":"); + parse_display_fail("::"); + parse_display_fail(":::"); + parse_display_fail(":."); + parse_display_fail(":a"); + parse_display_fail(":a."); + parse_display_fail(":0."); + parse_display_fail(":.a"); + parse_display_fail(":.0"); + parse_display_fail(":0.a"); + parse_display_fail(":0.0."); + + parse_display_fail("127.0.0.1"); + parse_display_fail("127.0.0.1:"); + parse_display_fail("127.0.0.1::"); + parse_display_fail("::127.0.0.1"); + parse_display_fail("::127.0.0.1:"); + parse_display_fail("::127.0.0.1::"); + parse_display_fail("::ffff:127.0.0.1"); + parse_display_fail("::ffff:127.0.0.1:"); + parse_display_fail("::ffff:127.0.0.1::"); + parse_display_fail("localhost"); + parse_display_fail("localhost:"); + parse_display_fail("localhost::"); +} +END_TEST + +/* }}} */ + +static void popcount_eq(uint32_t bits, int count) +{ + fail_unless(xcb_popcount(bits) == count, "unexpected popcount(%08x) != %d", bits, count); +} + +START_TEST(popcount) +{ + uint32_t mask; + int count; + + for (mask = 0xffffffff, count = 32; count >= 0; mask >>= 1, --count) { + popcount_eq(mask, count); + } + for (mask = 0x80000000; mask; mask >>= 1) { + popcount_eq(mask, 1); + } + for (mask = 0x80000000; mask > 1; mask >>= 1) { + popcount_eq(mask | 1, 2); + } +} +END_TEST + +Suite *public_suite(void) +{ + Suite *s = suite_create("Public API"); + putenv("DISPLAY="); + suite_add_test(s, parse_display_unix, "xcb_parse_display unix"); + suite_add_test(s, parse_display_ip, "xcb_parse_display ip"); + suite_add_test(s, parse_display_ipv4, "xcb_parse_display ipv4"); + suite_add_test(s, parse_display_ipv6, "xcb_parse_display ipv6"); + suite_add_test(s, parse_display_decnet, "xcb_parse_display decnet"); + suite_add_test(s, parse_display_negative, "xcb_parse_display negative"); + suite_add_test(s, popcount, "xcb_popcount"); + return s; +} diff --git a/libxcb/tests/check_suites.h b/libxcb/tests/check_suites.h index 9eaf04293..499f1afaf 100644 --- a/libxcb/tests/check_suites.h +++ b/libxcb/tests/check_suites.h @@ -1,4 +1,4 @@ -#include <check.h>
-
-void suite_add_test(Suite *s, TFun tf, const char *name);
-Suite *public_suite(void);
+#include <check.h> + +void suite_add_test(Suite *s, TFun tf, const char *name); +Suite *public_suite(void); diff --git a/libxcb/tools/README b/libxcb/tools/README index d9b5e09e5..2d1874e14 100644 --- a/libxcb/tools/README +++ b/libxcb/tools/README @@ -1,17 +1,17 @@ -
-api_conv.pl:
-------------
-
- Description: used to convert old XCB names in camel case to lower
- case names.
-
- Usage:
-
- * for several files:
-
-perl -i xcb/tools/api_conv.pl xcb/tools/constants <file1> <file2> ...
-
- * for a directory:
-
-find dir -name '*.[ch]' -exec perl -i xcb/tools/api_conv.pl xcb/tools/constants {} +
-
+ +api_conv.pl: +------------ + + Description: used to convert old XCB names in camel case to lower + case names. + + Usage: + + * for several files: + +perl -i xcb/tools/api_conv.pl xcb/tools/constants <file1> <file2> ... + + * for a directory: + +find dir -name '*.[ch]' -exec perl -i xcb/tools/api_conv.pl xcb/tools/constants {} + + diff --git a/libxcb/tools/api_conv.pl b/libxcb/tools/api_conv.pl index 8f3cfa8ce..5b3c18d15 100644 --- a/libxcb/tools/api_conv.pl +++ b/libxcb/tools/api_conv.pl @@ -1,98 +1,98 @@ -#!/usr/bin/perl -plw
-use strict;
-
-BEGIN {
- %::const = map { $_ => 1 } (
- # constants in xcb.h
- "XCBNone",
- "XCBCopyFromParent",
- "XCBCurrentTime",
- "XCBNoSymbol",
- "XCBError",
- "XCBReply",
- # renamed constants
- "XCBButtonAny",
- "XCBButton1",
- "XCBButton2",
- "XCBButton3",
- "XCBButton4",
- "XCBButton5",
- "XCBHostInsert",
- "XCBHostDelete",
- "XCBGlxGC_GL_CURRENT_BIT",
- "XCBGlxGC_GL_POINT_BIT",
- "XCBGlxGC_GL_LINE_BIT",
- "XCBGlxGC_GL_POLYGON_BIT",
- "XCBGlxGC_GL_POLYGON_STIPPLE_BIT",
- "XCBGlxGC_GL_PIXEL_MODE_BIT",
- "XCBGlxGC_GL_LIGHTING_BIT",
- "XCBGlxGC_GL_FOG_BIT",
- "XCBGlxGC_GL_DEPTH_BUFFER_BIT",
- "XCBGlxGC_GL_ACCUM_BUFFER_BIT",
- "XCBGlxGC_GL_STENCIL_BUFFER_BIT",
- "XCBGlxGC_GL_VIEWPORT_BIT",
- "XCBGlxGC_GL_TRANSFORM_BIT",
- "XCBGlxGC_GL_ENABLE_BIT",
- "XCBGlxGC_GL_COLOR_BUFFER_BIT",
- "XCBGlxGC_GL_HINT_BIT",
- "XCBGlxGC_GL_EVAL_BIT",
- "XCBGlxGC_GL_LIST_BIT",
- "XCBGlxGC_GL_TEXTURE_BIT",
- "XCBGlxGC_GL_SCISSOR_BIT",
- "XCBGlxGC_GL_ALL_ATTRIB_BITS",
- "XCBGlxRM_GL_RENDER",
- "XCBGlxRM_GL_FEEDBACK",
- "XCBGlxRM_GL_SELECT",
- );
- open(CONST, shift) or die "failed to open constants list: $!";
- while(<CONST>)
- {
- chomp;
- die "invalid constant name: \"$_\"" unless /^XCB[A-Za-z0-9_]*$/;
- $::const{$_} = 1;
- }
- close(CONST);
-}
-
-sub convert($$)
-{
- local $_ = shift;
- my ($fun) = @_;
-
- return "xcb_generate_id" if /^xcb_[a-z0-9_]+_new$/ or /^XCB[A-Z0-9]+New$/;
- return "uint$1_t" if /^CARD(8|16|32)$/;
- return "int$1_t" if /^INT(8|16|32)$/;
- return "uint8_t" if $_ eq 'BOOL' or $_ eq 'BYTE';
- return $_ if /^[A-Z0-9]*_[A-Z0-9_]*$/ or !/^XCB(.+)/;
- my $const = defined $::const{$_};
- $_ = $1;
-
- s/^(GX|RandR|XFixes|XP|XvMC|ScreenSaver)(.)/uc($1) . "_" . $2/e unless /^ScreenSaver(?:Reset|Active)$/;
-
- my %abbr = (
- "Iter" => "iterator",
- "Req" => "request",
- "Rep" => "reply",
- );
-
- my $word;
- if(/CHAR2B|INT64|FLOAT32|FLOAT64|BOOL32|STRING8/)
- {
- $word = qr/[A-Z](?:[A-Z0-9]*|[a-z]*)/;
- } else {
- $word = qr/[0-9]+|[A-Z](?:[A-Z]*|[a-z]*)/;
- }
- s/($word)_?(?=[0-9A-Z]|$)/"_" . ($abbr{$1} or lc($1))/eg;
-
- s/^_shape_shape_/_shape_/;
- s/^_xf_?86_dri/_xf86dri/;
- $_ = "_family_decnet" if $_ eq "_family_de_cnet";
- return "XCB" . uc($_) if $const;
-
- $_ .= "_t" unless $fun or /_id$/;
-
- return "xcb" . $_;
-}
-
-s/^(\s*#\s*include\s*<)X11\/XCB\//$1xcb\//;
-s/([_A-Za-z][_A-Za-z0-9]*)([ \t]*\()?/convert($1, defined $2) . ($2 or "")/eg;
+#!/usr/bin/perl -plw +use strict; + +BEGIN { + %::const = map { $_ => 1 } ( + # constants in xcb.h + "XCBNone", + "XCBCopyFromParent", + "XCBCurrentTime", + "XCBNoSymbol", + "XCBError", + "XCBReply", + # renamed constants + "XCBButtonAny", + "XCBButton1", + "XCBButton2", + "XCBButton3", + "XCBButton4", + "XCBButton5", + "XCBHostInsert", + "XCBHostDelete", + "XCBGlxGC_GL_CURRENT_BIT", + "XCBGlxGC_GL_POINT_BIT", + "XCBGlxGC_GL_LINE_BIT", + "XCBGlxGC_GL_POLYGON_BIT", + "XCBGlxGC_GL_POLYGON_STIPPLE_BIT", + "XCBGlxGC_GL_PIXEL_MODE_BIT", + "XCBGlxGC_GL_LIGHTING_BIT", + "XCBGlxGC_GL_FOG_BIT", + "XCBGlxGC_GL_DEPTH_BUFFER_BIT", + "XCBGlxGC_GL_ACCUM_BUFFER_BIT", + "XCBGlxGC_GL_STENCIL_BUFFER_BIT", + "XCBGlxGC_GL_VIEWPORT_BIT", + "XCBGlxGC_GL_TRANSFORM_BIT", + "XCBGlxGC_GL_ENABLE_BIT", + "XCBGlxGC_GL_COLOR_BUFFER_BIT", + "XCBGlxGC_GL_HINT_BIT", + "XCBGlxGC_GL_EVAL_BIT", + "XCBGlxGC_GL_LIST_BIT", + "XCBGlxGC_GL_TEXTURE_BIT", + "XCBGlxGC_GL_SCISSOR_BIT", + "XCBGlxGC_GL_ALL_ATTRIB_BITS", + "XCBGlxRM_GL_RENDER", + "XCBGlxRM_GL_FEEDBACK", + "XCBGlxRM_GL_SELECT", + ); + open(CONST, shift) or die "failed to open constants list: $!"; + while(<CONST>) + { + chomp; + die "invalid constant name: \"$_\"" unless /^XCB[A-Za-z0-9_]*$/; + $::const{$_} = 1; + } + close(CONST); +} + +sub convert($$) +{ + local $_ = shift; + my ($fun) = @_; + + return "xcb_generate_id" if /^xcb_[a-z0-9_]+_new$/ or /^XCB[A-Z0-9]+New$/; + return "uint$1_t" if /^CARD(8|16|32)$/; + return "int$1_t" if /^INT(8|16|32)$/; + return "uint8_t" if $_ eq 'BOOL' or $_ eq 'BYTE'; + return $_ if /^[A-Z0-9]*_[A-Z0-9_]*$/ or !/^XCB(.+)/; + my $const = defined $::const{$_}; + $_ = $1; + + s/^(GX|RandR|XFixes|XP|XvMC|ScreenSaver)(.)/uc($1) . "_" . $2/e unless /^ScreenSaver(?:Reset|Active)$/; + + my %abbr = ( + "Iter" => "iterator", + "Req" => "request", + "Rep" => "reply", + ); + + my $word; + if(/CHAR2B|INT64|FLOAT32|FLOAT64|BOOL32|STRING8/) + { + $word = qr/[A-Z](?:[A-Z0-9]*|[a-z]*)/; + } else { + $word = qr/[0-9]+|[A-Z](?:[A-Z]*|[a-z]*)/; + } + s/($word)_?(?=[0-9A-Z]|$)/"_" . ($abbr{$1} or lc($1))/eg; + + s/^_shape_shape_/_shape_/; + s/^_xf_?86_dri/_xf86dri/; + $_ = "_family_decnet" if $_ eq "_family_de_cnet"; + return "XCB" . uc($_) if $const; + + $_ .= "_t" unless $fun or /_id$/; + + return "xcb" . $_; +} + +s/^(\s*#\s*include\s*<)X11\/XCB\//$1xcb\//; +s/([_A-Za-z][_A-Za-z0-9]*)([ \t]*\()?/convert($1, defined $2) . ($2 or "")/eg; diff --git a/libxcb/tools/constants b/libxcb/tools/constants index 2bc101f1a..168560015 100644 --- a/libxcb/tools/constants +++ b/libxcb/tools/constants @@ -1,573 +1,573 @@ -XCBCompositeRedirectAutomatic
-XCBCompositeRedirectManual
-XCBDamageReportLevelRawRectangles
-XCBDamageReportLevelDeltaRectangles
-XCBDamageReportLevelBoundingBox
-XCBDamageReportLevelNonEmpty
-XCBDamageBadDamage
-XCBDamageNotify
-XCBGlxGeneric
-XCBGlxBadContext
-XCBGlxBadContextState
-XCBGlxBadDrawable
-XCBGlxBadPixmap
-XCBGlxBadContextTag
-XCBGlxBadCurrentWindow
-XCBGlxBadRenderRequest
-XCBGlxBadLargeRequest
-XCBGlxUnsupportedPrivateRequest
-XCBGlxBadFBConfig
-XCBGlxBadPbuffer
-XCBGlxBadCurrentDrawable
-XCBGlxBadWindow
-XCBGlxPbufferClobber
-XCBGlxPBCETDamaged
-XCBGlxPBCETSaved
-XCBGlxPBCDTWindow
-XCBGlxPBCDTPbuffer
-XCBGlxGC_GL_CURRENT_BIT
-XCBGlxGC_GL_POINT_BIT
-XCBGlxGC_GL_LINE_BIT
-XCBGlxGC_GL_POLYGON_BIT
-XCBGlxGC_GL_POLYGON_STIPPLE_BIT
-XCBGlxGC_GL_PIXEL_MODE_BIT
-XCBGlxGC_GL_LIGHTING_BIT
-XCBGlxGC_GL_FOG_BIT
-XCBGlxGC_GL_DEPTH_BUFFER_BIT
-XCBGlxGC_GL_ACCUM_BUFFER_BIT
-XCBGlxGC_GL_STENCIL_BUFFER_BIT
-XCBGlxGC_GL_VIEWPORT_BIT
-XCBGlxGC_GL_TRANSFORM_BIT
-XCBGlxGC_GL_ENABLE_BIT
-XCBGlxGC_GL_COLOR_BUFFER_BIT
-XCBGlxGC_GL_HINT_BIT
-XCBGlxGC_GL_EVAL_BIT
-XCBGlxGC_GL_LIST_BIT
-XCBGlxGC_GL_TEXTURE_BIT
-XCBGlxGC_GL_SCISSOR_BIT
-XCBGlxGC_GL_ALL_ATTRIB_BITS
-XCBGlxRM_GL_RENDER
-XCBGlxRM_GL_FEEDBACK
-XCBGlxRM_GL_SELECT
-XCBRandRRotationRotate_0
-XCBRandRRotationRotate_90
-XCBRandRRotationRotate_180
-XCBRandRRotationRotate_270
-XCBRandRRotationReflect_X
-XCBRandRRotationReflect_Y
-XCBRandRSetConfigSuccess
-XCBRandRSetConfigInvalidConfigTime
-XCBRandRSetConfigInvalidTime
-XCBRandRSetConfigFailed
-XCBRandRSMScreenChangeNotify
-XCBRandRScreenChangeNotify
-XCBRecordHTypeFromServerTime
-XCBRecordHTypeFromClientTime
-XCBRecordHTypeFromClientSequence
-XCBRecordCSCurrentClients
-XCBRecordCSFutureClients
-XCBRecordCSAllClients
-XCBRecordBadContext
-XCBRenderPictTypeIndexed
-XCBRenderPictTypeDirect
-XCBRenderPictOpClear
-XCBRenderPictOpSrc
-XCBRenderPictOpDst
-XCBRenderPictOpOver
-XCBRenderPictOpOverReverse
-XCBRenderPictOpIn
-XCBRenderPictOpInReverse
-XCBRenderPictOpOut
-XCBRenderPictOpOutReverse
-XCBRenderPictOpAtop
-XCBRenderPictOpAtopReverse
-XCBRenderPictOpXor
-XCBRenderPictOpAdd
-XCBRenderPictOpSaturate
-XCBRenderPictOpDisjointClear
-XCBRenderPictOpDisjointSrc
-XCBRenderPictOpDisjointDst
-XCBRenderPictOpDisjointOver
-XCBRenderPictOpDisjointOverReverse
-XCBRenderPictOpDisjointIn
-XCBRenderPictOpDisjointInReverse
-XCBRenderPictOpDisjointOut
-XCBRenderPictOpDisjointOutReverse
-XCBRenderPictOpDisjointAtop
-XCBRenderPictOpDisjointAtopReverse
-XCBRenderPictOpDisjointXor
-XCBRenderPictOpConjointClear
-XCBRenderPictOpConjointSrc
-XCBRenderPictOpConjointDst
-XCBRenderPictOpConjointOver
-XCBRenderPictOpConjointOverReverse
-XCBRenderPictOpConjointIn
-XCBRenderPictOpConjointInReverse
-XCBRenderPictOpConjointOut
-XCBRenderPictOpConjointOutReverse
-XCBRenderPictOpConjointAtop
-XCBRenderPictOpConjointAtopReverse
-XCBRenderPictOpConjointXor
-XCBRenderPolyEdgeSharp
-XCBRenderPolyEdgeSmooth
-XCBRenderPolyModePrecise
-XCBRenderPolyModeImprecise
-XCBRenderCPRepeat
-XCBRenderCPAlphaMap
-XCBRenderCPAlphaXOrigin
-XCBRenderCPAlphaYOrigin
-XCBRenderCPClipXOrigin
-XCBRenderCPClipYOrigin
-XCBRenderCPClipMask
-XCBRenderCPGraphicsExposure
-XCBRenderCPSubwindowMode
-XCBRenderCPPolyEdge
-XCBRenderCPPolyMode
-XCBRenderCPDither
-XCBRenderCPComponentAlpha
-XCBRenderSubPixelUnknown
-XCBRenderSubPixelHorizontalRGB
-XCBRenderSubPixelHorizontalBGR
-XCBRenderSubPixelVerticalRGB
-XCBRenderSubPixelVerticalBGR
-XCBRenderSubPixelNone
-XCBRenderPictFormat
-XCBRenderPicture
-XCBRenderPictOp
-XCBRenderGlyphSet
-XCBRenderGlyph
-XCBScreenSaverKindBlanked
-XCBScreenSaverKindInternal
-XCBScreenSaverKindExternal
-XCBScreenSaverEventNotifyMask
-XCBScreenSaverEventCycleMask
-XCBScreenSaverStateOff
-XCBScreenSaverStateOn
-XCBScreenSaverStateCycle
-XCBScreenSaverStateDisabled
-XCBScreenSaverNotify
-XCBShapeSOSet
-XCBShapeSOUnion
-XCBShapeSOIntersect
-XCBShapeSOSubtract
-XCBShapeSOInvert
-XCBShapeSKBounding
-XCBShapeSKClip
-XCBShapeSKInput
-XCBShapeNotify
-XCBShmCompletion
-XCBShmBadSeg
-XCBSyncALARMSTATEActive
-XCBSyncALARMSTATEInactive
-XCBSyncALARMSTATEDestroyed
-XCBSyncTESTTYPEPositiveTransition
-XCBSyncTESTTYPENegativeTransition
-XCBSyncTESTTYPEPositiveComparison
-XCBSyncTESTTYPENegativeComparison
-XCBSyncVALUETYPEAbsolute
-XCBSyncVALUETYPERelative
-XCBSyncCACounter
-XCBSyncCAValueType
-XCBSyncCAValue
-XCBSyncCATestType
-XCBSyncCADelta
-XCBSyncCAEvents
-XCBSyncCounter
-XCBSyncAlarm
-XCBSyncCounterNotify
-XCBSyncAlarmNotify
-XCBXevieDatatypeUnmodified
-XCBXevieDatatypeModified
-XCBXFixesSaveSetModeInsert
-XCBXFixesSaveSetModeDelete
-XCBXFixesSaveSetTargetNearest
-XCBXFixesSaveSetTargetRoot
-XCBXFixesSaveSetMappingMap
-XCBXFixesSaveSetMappingUnmap
-XCBXFixesSelectionEventSetSelectionOwner
-XCBXFixesSelectionEventSelectionWindowDestroy
-XCBXFixesSelectionEventSelectionClientClose
-XCBXFixesSelectionEventMaskSetSelectionOwner
-XCBXFixesSelectionEventMaskSelectionWindowDestroy
-XCBXFixesSelectionEventMaskSelectionClientClose
-XCBXFixesSelectionNotify
-XCBXFixesCursorNotifyDisplayCursor
-XCBXFixesCursorNotifyMaskDisplayCursor
-XCBXFixesCursorNotify
-XCBXFixesBadRegion
-XCBXPGetDocFinished
-XCBXPGetDocSecondConsumer
-XCBXPEvMaskNoEventMask
-XCBXPEvMaskPrintMask
-XCBXPEvMaskAttributeMask
-XCBXPDetailStartJobNotify
-XCBXPDetailEndJobNotify
-XCBXPDetailStartDocNotify
-XCBXPDetailEndDocNotify
-XCBXPDetailStartPageNotify
-XCBXPDetailEndPageNotify
-XCBXPAttrJobAttr
-XCBXPAttrDocAttr
-XCBXPAttrPageAttr
-XCBXPAttrPrinterAttr
-XCBXPAttrServerAttr
-XCBXPAttrMediumAttr
-XCBXPAttrSpoolerAttr
-XCBXPNotify
-XCBXPAttributNotify
-XCBXPBadContext
-XCBXPBadSequence
-XCBXvTypeInputMask
-XCBXvTypeOutputMask
-XCBXvTypeVideoMask
-XCBXvTypeStillMask
-XCBXvTypeImageMask
-XCBXvImageFormatInfoTypeRGB
-XCBXvImageFormatInfoTypeYUV
-XCBXvImageFormatInfoFormatPacked
-XCBXvImageFormatInfoFormatPlanar
-XCBXvAttributeFlagGettable
-XCBXvAttributeFlagSettable
-XCBXvBadPort
-XCBXvBadEncoding
-XCBXvBadControl
-XCBXvVideoNotify
-XCBXvPortNotify
-XCBTestCursorNone
-XCBTestCursorCurrent
-XCBVisualClassStaticGray
-XCBVisualClassGrayScale
-XCBVisualClassStaticColor
-XCBVisualClassPseudoColor
-XCBVisualClassTrueColor
-XCBVisualClassDirectColor
-XCBImageOrderLSBFirst
-XCBImageOrderMSBFirst
-XCBModMaskShift
-XCBModMaskLock
-XCBModMaskControl
-XCBModMask1
-XCBModMask2
-XCBModMask3
-XCBModMask4
-XCBModMask5
-XCBKeyPress
-XCBKeyRelease
-XCBButtonMask1
-XCBButtonMask2
-XCBButtonMask3
-XCBButtonMask4
-XCBButtonMask5
-XCBButtonMaskAny
-XCBButtonPress
-XCBButtonRelease
-XCBMotionNormal
-XCBMotionHint
-XCBMotionNotify
-XCBNotifyDetailAncestor
-XCBNotifyDetailVirtual
-XCBNotifyDetailInferior
-XCBNotifyDetailNonlinear
-XCBNotifyDetailNonlinearVirtual
-XCBNotifyDetailPointer
-XCBNotifyDetailPointerRoot
-XCBNotifyDetailNone
-XCBNotifyModeNormal
-XCBNotifyModeGrab
-XCBNotifyModeUngrab
-XCBNotifyModeWhileGrabbed
-XCBEnterNotify
-XCBLeaveNotify
-XCBFocusIn
-XCBFocusOut
-XCBKeymapNotify
-XCBExpose
-XCBGraphicsExposure
-XCBNoExposure
-XCBVisibilityUnobscured
-XCBVisibilityPartiallyObscured
-XCBVisibilityFullyObscured
-XCBVisibilityNotify
-XCBCreateNotify
-XCBDestroyNotify
-XCBUnmapNotify
-XCBMapNotify
-XCBMapRequest
-XCBReparentNotify
-XCBConfigureNotify
-XCBConfigureRequest
-XCBGravityNotify
-XCBResizeRequest
-XCBPlaceOnTop
-XCBPlaceOnBottom
-XCBCirculateNotify
-XCBCirculateRequest
-XCBPropertyNewValue
-XCBPropertyDelete
-XCBPropertyNotify
-XCBSelectionClear
-XCBSelectionRequest
-XCBSelectionNotify
-XCBColormapStateUninstalled
-XCBColormapStateInstalled
-XCBColormapNotify
-XCBClientMessage
-XCBMappingModifier
-XCBMappingKeyboard
-XCBMappingPointer
-XCBMappingNotify
-XCBRequest
-XCBValue
-XCBWindow
-XCBPixmap
-XCBAtom
-XCBCursor
-XCBFont
-XCBMatch
-XCBDrawable
-XCBAccess
-XCBAlloc
-XCBColormap
-XCBGContext
-XCBIDChoice
-XCBName
-XCBLength
-XCBImplementation
-XCBWindowClassCopyFromParent
-XCBWindowClassInputOutput
-XCBWindowClassInputOnly
-XCBCWBackPixmap
-XCBCWBackPixel
-XCBCWBorderPixmap
-XCBCWBorderPixel
-XCBCWBitGravity
-XCBCWWinGravity
-XCBCWBackingStore
-XCBCWBackingPlanes
-XCBCWBackingPixel
-XCBCWOverrideRedirect
-XCBCWSaveUnder
-XCBCWEventMask
-XCBCWDontPropagate
-XCBCWColormap
-XCBCWCursor
-XCBBackPixmapNone
-XCBBackPixmapParentRelative
-XCBGravityBitForget
-XCBGravityWinUnmap
-XCBGravityNorthWest
-XCBGravityNorth
-XCBGravityNorthEast
-XCBGravityWest
-XCBGravityCenter
-XCBGravityEast
-XCBGravitySouthWest
-XCBGravitySouth
-XCBGravitySouthEast
-XCBGravityStatic
-XCBBackingStoreNotUseful
-XCBBackingStoreWhenMapped
-XCBBackingStoreAlways
-XCBEventMaskNoEvent
-XCBEventMaskKeyPress
-XCBEventMaskKeyRelease
-XCBEventMaskButtonPress
-XCBEventMaskButtonRelease
-XCBEventMaskEnterWindow
-XCBEventMaskLeaveWindow
-XCBEventMaskPointerMotion
-XCBEventMaskPointerMotionHint
-XCBEventMaskButton1Motion
-XCBEventMaskButton2Motion
-XCBEventMaskButton3Motion
-XCBEventMaskButton4Motion
-XCBEventMaskButton5Motion
-XCBEventMaskButtonMotion
-XCBEventMaskKeymapState
-XCBEventMaskExposure
-XCBEventMaskVisibilityChange
-XCBEventMaskStructureNotify
-XCBEventMaskResizeRedirect
-XCBEventMaskSubstructureNotify
-XCBEventMaskSubstructureRedirect
-XCBEventMaskFocusChange
-XCBEventMaskPropertyChange
-XCBEventMaskColorMapChange
-XCBEventMaskOwnerGrabButton
-XCBMapStateUnmapped
-XCBMapStateUnviewable
-XCBMapStateViewable
-XCBSetModeInsert
-XCBSetModeDelete
-XCBConfigWindowX
-XCBConfigWindowY
-XCBConfigWindowWidth
-XCBConfigWindowHeight
-XCBConfigWindowBorderWidth
-XCBConfigWindowSibling
-XCBConfigWindowStackMode
-XCBStackModeAbove
-XCBStackModeBelow
-XCBStackModeTopIf
-XCBStackModeBottomIf
-XCBStackModeOpposite
-XCBCirculateRaiseLowest
-XCBCirculateLowerHighest
-XCBPropModeReplace
-XCBPropModePrepend
-XCBPropModeAppend
-XCBGetPropertyTypeAny
-XCBSendEventDestPointerWindow
-XCBSendEventDestItemFocus
-XCBGrabModeAsync
-XCBGrabModeSync
-XCBGrabStatusSuccess
-XCBGrabStatusAlreadyGrabbed
-XCBGrabStatusInvalidTime
-XCBGrabStatusNotViewable
-XCBGrabStatusFrozen
-XCBButtonAny
-XCBButton1
-XCBButton2
-XCBButton3
-XCBButton4
-XCBButton5
-XCBGrabAny
-XCBAllowAsyncPointer
-XCBAllowSyncPointer
-XCBAllowReplayPointer
-XCBAllowAsyncKeyboard
-XCBAllowSyncKeyboard
-XCBAllowReplayKeyboard
-XCBAllowAsyncBoth
-XCBAllowSyncBoth
-XCBInputFocusNone
-XCBInputFocusPointerRoot
-XCBInputFocusParent
-XCBFontDrawLeftToRight
-XCBFontDrawRightToLeft
-XCBGCFunction
-XCBGCPlaneMask
-XCBGCForeground
-XCBGCBackground
-XCBGCLineWidth
-XCBGCLineStyle
-XCBGCCapStyle
-XCBGCJoinStyle
-XCBGCFillStyle
-XCBGCFillRule
-XCBGCTile
-XCBGCStipple
-XCBGCTileStippleOriginX
-XCBGCTileStippleOriginY
-XCBGCFont
-XCBGCSubwindowMode
-XCBGCGraphicsExposures
-XCBGCClipOriginX
-XCBGCClipOriginY
-XCBGCClipMask
-XCBGCDashOffset
-XCBGCDashList
-XCBGCArcMode
-XCBGXclear
-XCBGXand
-XCBGXandReverse
-XCBGXcopy
-XCBGXandInverted
-XCBGXnoop
-XCBGXxor
-XCBGXor
-XCBGXnor
-XCBGXequiv
-XCBGXinvert
-XCBGXorReverse
-XCBGXcopyInverted
-XCBGXorInverted
-XCBGXnand
-XCBGXset
-XCBLineStyleSolid
-XCBLineStyleOnOffDash
-XCBLineStyleDoubleDash
-XCBCapStyleNotLast
-XCBCapStyleCap
-XCBCapStyleButt
-XCBCapStyleProjecting
-XCBJoinStyleMitre
-XCBJoinStyleRound
-XCBJoinStyleBevel
-XCBFillStyleSolid
-XCBFillStyleTiled
-XCBFillStyleStippled
-XCBFillStyleOpaqueStippled
-XCBFillRuleEvenOdd
-XCBFillRuleWinding
-XCBSubwindowModeClipByChildren
-XCBSubwindowModeIncludeInferiors
-XCBArcModeChord
-XCBArcModePieSlice
-XCBClipOrderingUnsorted
-XCBClipOrderingYSorted
-XCBClipOrderingYXSorted
-XCBClipOrderingYXBanded
-XCBCoordModeOrigin
-XCBCoordModePrevious
-XCBPolyShapeComplex
-XCBPolyShapeNonconvex
-XCBPolyShapeConvex
-XCBImageFormatXYBitmap
-XCBImageFormatXYPixmap
-XCBImageFormatZPixmap
-XCBColormapAllocNone
-XCBColormapAllocAll
-XCBColorFlagRed
-XCBColorFlagGreen
-XCBColorFlagBlue
-XCBQueryShapeOfLargestCursor
-XCBQueryShapeOfFastestTile
-XCBQueryShapeOfFastestStipple
-XCBKBKeyClickPercent
-XCBKBBellPercent
-XCBKBBellPitch
-XCBKBBellDuration
-XCBKBLed
-XCBKBLedMode
-XCBKBKey
-XCBKBAutoRepeatMode
-XCBLedModeOff
-XCBLedModeOn
-XCBAutoRepeatModeOff
-XCBAutoRepeatModeOn
-XCBAutoRepeatModeDefault
-XCBBlankingNotPreferred
-XCBBlankingPreferred
-XCBBlankingDefault
-XCBExposuresNotAllowed
-XCBExposuresAllowed
-XCBExposuresDefault
-XCBHostInsert
-XCBHostDelete
-XCBFamilyInternet
-XCBFamilyDECnet
-XCBFamilyChaos
-XCBFamilyServerInterpreted
-XCBFamilyInternet6
-XCBAccessControlDisable
-XCBAccessControlEnable
-XCBCloseDownDestroyAll
-XCBCloseDownRetainPermanent
-XCBCloseDownRetainTemporary
-XCBKillAllTemporary
-XCBScreenSaverReset
-XCBScreenSaverActive
-XCBMappingStatusSuccess
-XCBMappingStatusBusy
-XCBMappingStatusFailure
-XCBMapIndexShift
-XCBMapIndexLock
-XCBMapIndexControl
-XCBMapIndex1
-XCBMapIndex2
-XCBMapIndex3
-XCBMapIndex4
-XCBMapIndex5
+XCBCompositeRedirectAutomatic +XCBCompositeRedirectManual +XCBDamageReportLevelRawRectangles +XCBDamageReportLevelDeltaRectangles +XCBDamageReportLevelBoundingBox +XCBDamageReportLevelNonEmpty +XCBDamageBadDamage +XCBDamageNotify +XCBGlxGeneric +XCBGlxBadContext +XCBGlxBadContextState +XCBGlxBadDrawable +XCBGlxBadPixmap +XCBGlxBadContextTag +XCBGlxBadCurrentWindow +XCBGlxBadRenderRequest +XCBGlxBadLargeRequest +XCBGlxUnsupportedPrivateRequest +XCBGlxBadFBConfig +XCBGlxBadPbuffer +XCBGlxBadCurrentDrawable +XCBGlxBadWindow +XCBGlxPbufferClobber +XCBGlxPBCETDamaged +XCBGlxPBCETSaved +XCBGlxPBCDTWindow +XCBGlxPBCDTPbuffer +XCBGlxGC_GL_CURRENT_BIT +XCBGlxGC_GL_POINT_BIT +XCBGlxGC_GL_LINE_BIT +XCBGlxGC_GL_POLYGON_BIT +XCBGlxGC_GL_POLYGON_STIPPLE_BIT +XCBGlxGC_GL_PIXEL_MODE_BIT +XCBGlxGC_GL_LIGHTING_BIT +XCBGlxGC_GL_FOG_BIT +XCBGlxGC_GL_DEPTH_BUFFER_BIT +XCBGlxGC_GL_ACCUM_BUFFER_BIT +XCBGlxGC_GL_STENCIL_BUFFER_BIT +XCBGlxGC_GL_VIEWPORT_BIT +XCBGlxGC_GL_TRANSFORM_BIT +XCBGlxGC_GL_ENABLE_BIT +XCBGlxGC_GL_COLOR_BUFFER_BIT +XCBGlxGC_GL_HINT_BIT +XCBGlxGC_GL_EVAL_BIT +XCBGlxGC_GL_LIST_BIT +XCBGlxGC_GL_TEXTURE_BIT +XCBGlxGC_GL_SCISSOR_BIT +XCBGlxGC_GL_ALL_ATTRIB_BITS +XCBGlxRM_GL_RENDER +XCBGlxRM_GL_FEEDBACK +XCBGlxRM_GL_SELECT +XCBRandRRotationRotate_0 +XCBRandRRotationRotate_90 +XCBRandRRotationRotate_180 +XCBRandRRotationRotate_270 +XCBRandRRotationReflect_X +XCBRandRRotationReflect_Y +XCBRandRSetConfigSuccess +XCBRandRSetConfigInvalidConfigTime +XCBRandRSetConfigInvalidTime +XCBRandRSetConfigFailed +XCBRandRSMScreenChangeNotify +XCBRandRScreenChangeNotify +XCBRecordHTypeFromServerTime +XCBRecordHTypeFromClientTime +XCBRecordHTypeFromClientSequence +XCBRecordCSCurrentClients +XCBRecordCSFutureClients +XCBRecordCSAllClients +XCBRecordBadContext +XCBRenderPictTypeIndexed +XCBRenderPictTypeDirect +XCBRenderPictOpClear +XCBRenderPictOpSrc +XCBRenderPictOpDst +XCBRenderPictOpOver +XCBRenderPictOpOverReverse +XCBRenderPictOpIn +XCBRenderPictOpInReverse +XCBRenderPictOpOut +XCBRenderPictOpOutReverse +XCBRenderPictOpAtop +XCBRenderPictOpAtopReverse +XCBRenderPictOpXor +XCBRenderPictOpAdd +XCBRenderPictOpSaturate +XCBRenderPictOpDisjointClear +XCBRenderPictOpDisjointSrc +XCBRenderPictOpDisjointDst +XCBRenderPictOpDisjointOver +XCBRenderPictOpDisjointOverReverse +XCBRenderPictOpDisjointIn +XCBRenderPictOpDisjointInReverse +XCBRenderPictOpDisjointOut +XCBRenderPictOpDisjointOutReverse +XCBRenderPictOpDisjointAtop +XCBRenderPictOpDisjointAtopReverse +XCBRenderPictOpDisjointXor +XCBRenderPictOpConjointClear +XCBRenderPictOpConjointSrc +XCBRenderPictOpConjointDst +XCBRenderPictOpConjointOver +XCBRenderPictOpConjointOverReverse +XCBRenderPictOpConjointIn +XCBRenderPictOpConjointInReverse +XCBRenderPictOpConjointOut +XCBRenderPictOpConjointOutReverse +XCBRenderPictOpConjointAtop +XCBRenderPictOpConjointAtopReverse +XCBRenderPictOpConjointXor +XCBRenderPolyEdgeSharp +XCBRenderPolyEdgeSmooth +XCBRenderPolyModePrecise +XCBRenderPolyModeImprecise +XCBRenderCPRepeat +XCBRenderCPAlphaMap +XCBRenderCPAlphaXOrigin +XCBRenderCPAlphaYOrigin +XCBRenderCPClipXOrigin +XCBRenderCPClipYOrigin +XCBRenderCPClipMask +XCBRenderCPGraphicsExposure +XCBRenderCPSubwindowMode +XCBRenderCPPolyEdge +XCBRenderCPPolyMode +XCBRenderCPDither +XCBRenderCPComponentAlpha +XCBRenderSubPixelUnknown +XCBRenderSubPixelHorizontalRGB +XCBRenderSubPixelHorizontalBGR +XCBRenderSubPixelVerticalRGB +XCBRenderSubPixelVerticalBGR +XCBRenderSubPixelNone +XCBRenderPictFormat +XCBRenderPicture +XCBRenderPictOp +XCBRenderGlyphSet +XCBRenderGlyph +XCBScreenSaverKindBlanked +XCBScreenSaverKindInternal +XCBScreenSaverKindExternal +XCBScreenSaverEventNotifyMask +XCBScreenSaverEventCycleMask +XCBScreenSaverStateOff +XCBScreenSaverStateOn +XCBScreenSaverStateCycle +XCBScreenSaverStateDisabled +XCBScreenSaverNotify +XCBShapeSOSet +XCBShapeSOUnion +XCBShapeSOIntersect +XCBShapeSOSubtract +XCBShapeSOInvert +XCBShapeSKBounding +XCBShapeSKClip +XCBShapeSKInput +XCBShapeNotify +XCBShmCompletion +XCBShmBadSeg +XCBSyncALARMSTATEActive +XCBSyncALARMSTATEInactive +XCBSyncALARMSTATEDestroyed +XCBSyncTESTTYPEPositiveTransition +XCBSyncTESTTYPENegativeTransition +XCBSyncTESTTYPEPositiveComparison +XCBSyncTESTTYPENegativeComparison +XCBSyncVALUETYPEAbsolute +XCBSyncVALUETYPERelative +XCBSyncCACounter +XCBSyncCAValueType +XCBSyncCAValue +XCBSyncCATestType +XCBSyncCADelta +XCBSyncCAEvents +XCBSyncCounter +XCBSyncAlarm +XCBSyncCounterNotify +XCBSyncAlarmNotify +XCBXevieDatatypeUnmodified +XCBXevieDatatypeModified +XCBXFixesSaveSetModeInsert +XCBXFixesSaveSetModeDelete +XCBXFixesSaveSetTargetNearest +XCBXFixesSaveSetTargetRoot +XCBXFixesSaveSetMappingMap +XCBXFixesSaveSetMappingUnmap +XCBXFixesSelectionEventSetSelectionOwner +XCBXFixesSelectionEventSelectionWindowDestroy +XCBXFixesSelectionEventSelectionClientClose +XCBXFixesSelectionEventMaskSetSelectionOwner +XCBXFixesSelectionEventMaskSelectionWindowDestroy +XCBXFixesSelectionEventMaskSelectionClientClose +XCBXFixesSelectionNotify +XCBXFixesCursorNotifyDisplayCursor +XCBXFixesCursorNotifyMaskDisplayCursor +XCBXFixesCursorNotify +XCBXFixesBadRegion +XCBXPGetDocFinished +XCBXPGetDocSecondConsumer +XCBXPEvMaskNoEventMask +XCBXPEvMaskPrintMask +XCBXPEvMaskAttributeMask +XCBXPDetailStartJobNotify +XCBXPDetailEndJobNotify +XCBXPDetailStartDocNotify +XCBXPDetailEndDocNotify +XCBXPDetailStartPageNotify +XCBXPDetailEndPageNotify +XCBXPAttrJobAttr +XCBXPAttrDocAttr +XCBXPAttrPageAttr +XCBXPAttrPrinterAttr +XCBXPAttrServerAttr +XCBXPAttrMediumAttr +XCBXPAttrSpoolerAttr +XCBXPNotify +XCBXPAttributNotify +XCBXPBadContext +XCBXPBadSequence +XCBXvTypeInputMask +XCBXvTypeOutputMask +XCBXvTypeVideoMask +XCBXvTypeStillMask +XCBXvTypeImageMask +XCBXvImageFormatInfoTypeRGB +XCBXvImageFormatInfoTypeYUV +XCBXvImageFormatInfoFormatPacked +XCBXvImageFormatInfoFormatPlanar +XCBXvAttributeFlagGettable +XCBXvAttributeFlagSettable +XCBXvBadPort +XCBXvBadEncoding +XCBXvBadControl +XCBXvVideoNotify +XCBXvPortNotify +XCBTestCursorNone +XCBTestCursorCurrent +XCBVisualClassStaticGray +XCBVisualClassGrayScale +XCBVisualClassStaticColor +XCBVisualClassPseudoColor +XCBVisualClassTrueColor +XCBVisualClassDirectColor +XCBImageOrderLSBFirst +XCBImageOrderMSBFirst +XCBModMaskShift +XCBModMaskLock +XCBModMaskControl +XCBModMask1 +XCBModMask2 +XCBModMask3 +XCBModMask4 +XCBModMask5 +XCBKeyPress +XCBKeyRelease +XCBButtonMask1 +XCBButtonMask2 +XCBButtonMask3 +XCBButtonMask4 +XCBButtonMask5 +XCBButtonMaskAny +XCBButtonPress +XCBButtonRelease +XCBMotionNormal +XCBMotionHint +XCBMotionNotify +XCBNotifyDetailAncestor +XCBNotifyDetailVirtual +XCBNotifyDetailInferior +XCBNotifyDetailNonlinear +XCBNotifyDetailNonlinearVirtual +XCBNotifyDetailPointer +XCBNotifyDetailPointerRoot +XCBNotifyDetailNone +XCBNotifyModeNormal +XCBNotifyModeGrab +XCBNotifyModeUngrab +XCBNotifyModeWhileGrabbed +XCBEnterNotify +XCBLeaveNotify +XCBFocusIn +XCBFocusOut +XCBKeymapNotify +XCBExpose +XCBGraphicsExposure +XCBNoExposure +XCBVisibilityUnobscured +XCBVisibilityPartiallyObscured +XCBVisibilityFullyObscured +XCBVisibilityNotify +XCBCreateNotify +XCBDestroyNotify +XCBUnmapNotify +XCBMapNotify +XCBMapRequest +XCBReparentNotify +XCBConfigureNotify +XCBConfigureRequest +XCBGravityNotify +XCBResizeRequest +XCBPlaceOnTop +XCBPlaceOnBottom +XCBCirculateNotify +XCBCirculateRequest +XCBPropertyNewValue +XCBPropertyDelete +XCBPropertyNotify +XCBSelectionClear +XCBSelectionRequest +XCBSelectionNotify +XCBColormapStateUninstalled +XCBColormapStateInstalled +XCBColormapNotify +XCBClientMessage +XCBMappingModifier +XCBMappingKeyboard +XCBMappingPointer +XCBMappingNotify +XCBRequest +XCBValue +XCBWindow +XCBPixmap +XCBAtom +XCBCursor +XCBFont +XCBMatch +XCBDrawable +XCBAccess +XCBAlloc +XCBColormap +XCBGContext +XCBIDChoice +XCBName +XCBLength +XCBImplementation +XCBWindowClassCopyFromParent +XCBWindowClassInputOutput +XCBWindowClassInputOnly +XCBCWBackPixmap +XCBCWBackPixel +XCBCWBorderPixmap +XCBCWBorderPixel +XCBCWBitGravity +XCBCWWinGravity +XCBCWBackingStore +XCBCWBackingPlanes +XCBCWBackingPixel +XCBCWOverrideRedirect +XCBCWSaveUnder +XCBCWEventMask +XCBCWDontPropagate +XCBCWColormap +XCBCWCursor +XCBBackPixmapNone +XCBBackPixmapParentRelative +XCBGravityBitForget +XCBGravityWinUnmap +XCBGravityNorthWest +XCBGravityNorth +XCBGravityNorthEast +XCBGravityWest +XCBGravityCenter +XCBGravityEast +XCBGravitySouthWest +XCBGravitySouth +XCBGravitySouthEast +XCBGravityStatic +XCBBackingStoreNotUseful +XCBBackingStoreWhenMapped +XCBBackingStoreAlways +XCBEventMaskNoEvent +XCBEventMaskKeyPress +XCBEventMaskKeyRelease +XCBEventMaskButtonPress +XCBEventMaskButtonRelease +XCBEventMaskEnterWindow +XCBEventMaskLeaveWindow +XCBEventMaskPointerMotion +XCBEventMaskPointerMotionHint +XCBEventMaskButton1Motion +XCBEventMaskButton2Motion +XCBEventMaskButton3Motion +XCBEventMaskButton4Motion +XCBEventMaskButton5Motion +XCBEventMaskButtonMotion +XCBEventMaskKeymapState +XCBEventMaskExposure +XCBEventMaskVisibilityChange +XCBEventMaskStructureNotify +XCBEventMaskResizeRedirect +XCBEventMaskSubstructureNotify +XCBEventMaskSubstructureRedirect +XCBEventMaskFocusChange +XCBEventMaskPropertyChange +XCBEventMaskColorMapChange +XCBEventMaskOwnerGrabButton +XCBMapStateUnmapped +XCBMapStateUnviewable +XCBMapStateViewable +XCBSetModeInsert +XCBSetModeDelete +XCBConfigWindowX +XCBConfigWindowY +XCBConfigWindowWidth +XCBConfigWindowHeight +XCBConfigWindowBorderWidth +XCBConfigWindowSibling +XCBConfigWindowStackMode +XCBStackModeAbove +XCBStackModeBelow +XCBStackModeTopIf +XCBStackModeBottomIf +XCBStackModeOpposite +XCBCirculateRaiseLowest +XCBCirculateLowerHighest +XCBPropModeReplace +XCBPropModePrepend +XCBPropModeAppend +XCBGetPropertyTypeAny +XCBSendEventDestPointerWindow +XCBSendEventDestItemFocus +XCBGrabModeAsync +XCBGrabModeSync +XCBGrabStatusSuccess +XCBGrabStatusAlreadyGrabbed +XCBGrabStatusInvalidTime +XCBGrabStatusNotViewable +XCBGrabStatusFrozen +XCBButtonAny +XCBButton1 +XCBButton2 +XCBButton3 +XCBButton4 +XCBButton5 +XCBGrabAny +XCBAllowAsyncPointer +XCBAllowSyncPointer +XCBAllowReplayPointer +XCBAllowAsyncKeyboard +XCBAllowSyncKeyboard +XCBAllowReplayKeyboard +XCBAllowAsyncBoth +XCBAllowSyncBoth +XCBInputFocusNone +XCBInputFocusPointerRoot +XCBInputFocusParent +XCBFontDrawLeftToRight +XCBFontDrawRightToLeft +XCBGCFunction +XCBGCPlaneMask +XCBGCForeground +XCBGCBackground +XCBGCLineWidth +XCBGCLineStyle +XCBGCCapStyle +XCBGCJoinStyle +XCBGCFillStyle +XCBGCFillRule +XCBGCTile +XCBGCStipple +XCBGCTileStippleOriginX +XCBGCTileStippleOriginY +XCBGCFont +XCBGCSubwindowMode +XCBGCGraphicsExposures +XCBGCClipOriginX +XCBGCClipOriginY +XCBGCClipMask +XCBGCDashOffset +XCBGCDashList +XCBGCArcMode +XCBGXclear +XCBGXand +XCBGXandReverse +XCBGXcopy +XCBGXandInverted +XCBGXnoop +XCBGXxor +XCBGXor +XCBGXnor +XCBGXequiv +XCBGXinvert +XCBGXorReverse +XCBGXcopyInverted +XCBGXorInverted +XCBGXnand +XCBGXset +XCBLineStyleSolid +XCBLineStyleOnOffDash +XCBLineStyleDoubleDash +XCBCapStyleNotLast +XCBCapStyleCap +XCBCapStyleButt +XCBCapStyleProjecting +XCBJoinStyleMitre +XCBJoinStyleRound +XCBJoinStyleBevel +XCBFillStyleSolid +XCBFillStyleTiled +XCBFillStyleStippled +XCBFillStyleOpaqueStippled +XCBFillRuleEvenOdd +XCBFillRuleWinding +XCBSubwindowModeClipByChildren +XCBSubwindowModeIncludeInferiors +XCBArcModeChord +XCBArcModePieSlice +XCBClipOrderingUnsorted +XCBClipOrderingYSorted +XCBClipOrderingYXSorted +XCBClipOrderingYXBanded +XCBCoordModeOrigin +XCBCoordModePrevious +XCBPolyShapeComplex +XCBPolyShapeNonconvex +XCBPolyShapeConvex +XCBImageFormatXYBitmap +XCBImageFormatXYPixmap +XCBImageFormatZPixmap +XCBColormapAllocNone +XCBColormapAllocAll +XCBColorFlagRed +XCBColorFlagGreen +XCBColorFlagBlue +XCBQueryShapeOfLargestCursor +XCBQueryShapeOfFastestTile +XCBQueryShapeOfFastestStipple +XCBKBKeyClickPercent +XCBKBBellPercent +XCBKBBellPitch +XCBKBBellDuration +XCBKBLed +XCBKBLedMode +XCBKBKey +XCBKBAutoRepeatMode +XCBLedModeOff +XCBLedModeOn +XCBAutoRepeatModeOff +XCBAutoRepeatModeOn +XCBAutoRepeatModeDefault +XCBBlankingNotPreferred +XCBBlankingPreferred +XCBBlankingDefault +XCBExposuresNotAllowed +XCBExposuresAllowed +XCBExposuresDefault +XCBHostInsert +XCBHostDelete +XCBFamilyInternet +XCBFamilyDECnet +XCBFamilyChaos +XCBFamilyServerInterpreted +XCBFamilyInternet6 +XCBAccessControlDisable +XCBAccessControlEnable +XCBCloseDownDestroyAll +XCBCloseDownRetainPermanent +XCBCloseDownRetainTemporary +XCBKillAllTemporary +XCBScreenSaverReset +XCBScreenSaverActive +XCBMappingStatusSuccess +XCBMappingStatusBusy +XCBMappingStatusFailure +XCBMapIndexShift +XCBMapIndexLock +XCBMapIndexControl +XCBMapIndex1 +XCBMapIndex2 +XCBMapIndex3 +XCBMapIndex4 +XCBMapIndex5 XCBAllPlanes
\ No newline at end of file diff --git a/libxcb/xcb-composite.pc.in b/libxcb/xcb-composite.pc.in index 2cd20e913..02d49b0c2 100644 --- a/libxcb/xcb-composite.pc.in +++ b/libxcb/xcb-composite.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB Composite
-Description: XCB Composite Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb xcb-xfixes
-Libs: -L${libdir} -lxcb-composite
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB Composite +Description: XCB Composite Extension +Version: @PACKAGE_VERSION@ +Requires: xcb xcb-xfixes +Libs: -L${libdir} -lxcb-composite +Cflags: -I${includedir} diff --git a/libxcb/xcb-damage.pc.in b/libxcb/xcb-damage.pc.in index 1f694c5df..c4bc59986 100644 --- a/libxcb/xcb-damage.pc.in +++ b/libxcb/xcb-damage.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB Damage
-Description: XCB Damage Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb xcb-xfixes
-Libs: -L${libdir} -lxcb-damage
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB Damage +Description: XCB Damage Extension +Version: @PACKAGE_VERSION@ +Requires: xcb xcb-xfixes +Libs: -L${libdir} -lxcb-damage +Cflags: -I${includedir} diff --git a/libxcb/xcb-dpms.pc.in b/libxcb/xcb-dpms.pc.in index 4c369981b..838a054be 100644 --- a/libxcb/xcb-dpms.pc.in +++ b/libxcb/xcb-dpms.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB DPMS
-Description: XCB DPMS Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb
-Libs: -L${libdir} -lxcb-dpms
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB DPMS +Description: XCB DPMS Extension +Version: @PACKAGE_VERSION@ +Requires: xcb +Libs: -L${libdir} -lxcb-dpms +Cflags: -I${includedir} diff --git a/libxcb/xcb-dri2.pc.in b/libxcb/xcb-dri2.pc.in index 2b46adcb3..a9944dfa2 100644 --- a/libxcb/xcb-dri2.pc.in +++ b/libxcb/xcb-dri2.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB DRI2
-Description: XCB DRI2 Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb
-Libs: -L${libdir} -lxcb-dri2
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB DRI2 +Description: XCB DRI2 Extension +Version: @PACKAGE_VERSION@ +Requires: xcb +Libs: -L${libdir} -lxcb-dri2 +Cflags: -I${includedir} diff --git a/libxcb/xcb-glx.pc.in b/libxcb/xcb-glx.pc.in index e2b08abe1..bbd412675 100644 --- a/libxcb/xcb-glx.pc.in +++ b/libxcb/xcb-glx.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB GLX
-Description: XCB GLX Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb
-Libs: -L${libdir} -lxcb-glx
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB GLX +Description: XCB GLX Extension +Version: @PACKAGE_VERSION@ +Requires: xcb +Libs: -L${libdir} -lxcb-glx +Cflags: -I${includedir} diff --git a/libxcb/xcb-proto/.gitignore b/libxcb/xcb-proto/.gitignore index d0148ecfa..91876c66a 100644 --- a/libxcb/xcb-proto/.gitignore +++ b/libxcb/xcb-proto/.gitignore @@ -1,31 +1,31 @@ -aclocal.m4
-autom4te.cache
-compile
-depcomp
-install-sh
-libtool
-ltmain.sh
-missing
-mkinstalldirs
-py-compile
-config.guess
-config.h
-config.h.in
-config.log
-config.status
-config.sub
-configure
-configure.lineno
-.deps
-.dirstamp
-.libs
-*.lo
-*.loT
-*.la
-Makefile
-Makefile.in
-stamp-h1
-*.o
-*.pc
-*.tar.bz2
-*.tar.gz
+aclocal.m4 +autom4te.cache +compile +depcomp +install-sh +libtool +ltmain.sh +missing +mkinstalldirs +py-compile +config.guess +config.h +config.h.in +config.log +config.status +config.sub +configure +configure.lineno +.deps +.dirstamp +.libs +*.lo +*.loT +*.la +Makefile +Makefile.in +stamp-h1 +*.o +*.pc +*.tar.bz2 +*.tar.gz diff --git a/libxcb/xcb-proto/COPYING b/libxcb/xcb-proto/COPYING index 50a14e39e..54bfbe5b0 100644 --- a/libxcb/xcb-proto/COPYING +++ b/libxcb/xcb-proto/COPYING @@ -1,30 +1,30 @@ -Copyright (C) 2001-2006 Bart Massey, Jamey Sharp, and Josh Triplett.
-All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person
-obtaining a copy of this software and associated
-documentation files (the "Software"), to deal in the
-Software without restriction, including without limitation
-the rights to use, copy, modify, merge, publish, distribute,
-sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so,
-subject to the following conditions:
-
-The above copyright notice and this permission notice shall
-be included in all copies or substantial portions of the
-Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
-KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
-WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
-PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS
-BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
-IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors
-or their institutions shall not be used in advertising or
-otherwise to promote the sale, use or other dealings in this
-Software without prior written authorization from the
-authors.
+Copyright (C) 2001-2006 Bart Massey, Jamey Sharp, and Josh Triplett. +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person +obtaining a copy of this software and associated +documentation files (the "Software"), to deal in the +Software without restriction, including without limitation +the rights to use, copy, modify, merge, publish, distribute, +sublicense, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, +subject to the following conditions: + +The above copyright notice and this permission notice shall +be included in all copies or substantial portions of the +Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY +KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE +WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR +PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS +BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER +IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors +or their institutions shall not be used in advertising or +otherwise to promote the sale, use or other dealings in this +Software without prior written authorization from the +authors. diff --git a/libxcb/xcb-proto/INSTALL b/libxcb/xcb-proto/INSTALL index bf8c23f1f..54caf7c19 100644 --- a/libxcb/xcb-proto/INSTALL +++ b/libxcb/xcb-proto/INSTALL @@ -1,229 +1,229 @@ -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
-Foundation, Inc.
-
- This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
- These are generic installation instructions.
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. (Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.)
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
-
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package.
-
- 4. Type `make install' to install the programs and any data files and
- documentation.
-
- 5. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
-Compilers and Options
-=====================
-
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
-for details on some of the pertinent environment variables.
-
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
-
- ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-
- *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
- You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
- If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory. After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
-
-Installation Names
-==================
-
- By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
- In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
- Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
- There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on. Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
- CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
- OS KERNEL-OS
-
- See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
- If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
-produce code for.
-
- If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
- Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
-
- ./configure CC=/usr/local2/bin/gcc
-
-will cause the specified gcc to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-`configure' Invocation
-======================
-
- `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
- Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`--cache-file=FILE'
- Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
- disable caching.
-
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
-
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software +Foundation, Inc. + + This file is free documentation; the Free Software Foundation gives +unlimited permission to copy, distribute and modify it. + +Basic Installation +================== + + These are generic installation instructions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. (Caching is +disabled by default to prevent problems with accidental use of stale +cache files.) + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You only need +`configure.ac' if you want to change it or regenerate `configure' using +a newer version of `autoconf'. + +The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. If you're + using `csh' on an old version of System V, you might need to type + `sh ./configure' instead to prevent `csh' from trying to execute + `configure' itself. + + Running `configure' takes awhile. While running, it prints some + messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package. + + 4. Type `make install' to install the programs and any data files and + documentation. + + 5. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you must use a version of `make' that +supports the `VPATH' variable, such as GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + + If you have to use a `make' that does not support the `VPATH' +variable, you have to compile the package for one architecture at a +time in the source code directory. After you have installed the +package for one architecture, use `make distclean' before reconfiguring +for another architecture. + +Installation Names +================== + + By default, `make install' will install the package's files in +`/usr/local/bin', `/usr/local/man', etc. You can specify an +installation prefix other than `/usr/local' by giving `configure' the +option `--prefix=PATH'. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +give `configure' the option `--exec-prefix=PATH', the package will use +PATH as the prefix for installing programs and libraries. +Documentation and other data files will still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=PATH' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +Optional Features +================= + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + +Specifying the System Type +========================== + + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS KERNEL-OS + + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the `--target=TYPE' option to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Defining Variables +================== + + Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +will cause the specified gcc to be used as the C compiler (unless it is +overridden in the site shell script). + +`configure' Invocation +====================== + + `configure' recognizes the following options to control how it +operates. + +`--help' +`-h' + Print a summary of the options to `configure', and exit. + +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. + diff --git a/libxcb/xcb-proto/README b/libxcb/xcb-proto/README index 11ffe528a..22d7debca 100644 --- a/libxcb/xcb-proto/README +++ b/libxcb/xcb-proto/README @@ -1,47 +1,47 @@ -About xcb-proto
-===============
-
-xcb-proto provides the XML-XCB protocol descriptions that libxcb uses to
-generate the majority of its code and API. We provide them separately
-from libxcb to allow reuse by other projects, such as additional
-language bindings, protocol dissectors, or documentation generators.
-
-This separation between the XCB transport layer and the
-automatically-generated protocol layer also makes it far easier to write
-new extensions. With the Xlib infrastructure, client-side support for
-new extensions requires significant duplication of effort. With XCB and
-the XML-XCB protocol descriptions, client-side support for a new
-extension requires only an XML description of the extension, and not a
-single line of code.
-
-Python libraries: xcb-proto also contains language-independent Python
-libraries that are used to parse an XML description and create objects
-used by Python code generators in individual language bindings. These
-libraries are installed into $(prefix)/lib/pythonX.X/site-packages. If
-this location is not on your system's Python path, scripts that import
-them will fail with import errors. In this case you must add the
-install location to your Python path by creating a file with a `.pth'
-extension in a directory that _is_ on the Python path, and put the
-path to the install location in that file. For example, on my system
-there is a file named 'local.pth' in /usr/lib/python2.5/site-packages,
-which contains '/usr/local/lib/python2.5/site-packages'. Note that
-this is only necessary on machines where XCB is being built.
-
-Please report any issues you find to the freedesktop.org bug tracker,
-at:
-
- <https://bugs.freedesktop.org/enter_bug.cgi?product=XCB>
-
-Discussion about XCB occurs on the XCB mailing list:
-
- <mailto:xcb at lists.freedesktop.org>
- <http://lists.freedesktop.org/mailman/listinfo/xcb>
-
-You can obtain the latest development versions of XCB using GIT.
-For anonymous checkouts, use:
-
- git clone git://anongit.freedesktop.org/git/xcb/proto
-
-For developers, use:
-
- git clone git+ssh://git.freedesktop.org/git/xcb/proto
+About xcb-proto +=============== + +xcb-proto provides the XML-XCB protocol descriptions that libxcb uses to +generate the majority of its code and API. We provide them separately +from libxcb to allow reuse by other projects, such as additional +language bindings, protocol dissectors, or documentation generators. + +This separation between the XCB transport layer and the +automatically-generated protocol layer also makes it far easier to write +new extensions. With the Xlib infrastructure, client-side support for +new extensions requires significant duplication of effort. With XCB and +the XML-XCB protocol descriptions, client-side support for a new +extension requires only an XML description of the extension, and not a +single line of code. + +Python libraries: xcb-proto also contains language-independent Python +libraries that are used to parse an XML description and create objects +used by Python code generators in individual language bindings. These +libraries are installed into $(prefix)/lib/pythonX.X/site-packages. If +this location is not on your system's Python path, scripts that import +them will fail with import errors. In this case you must add the +install location to your Python path by creating a file with a `.pth' +extension in a directory that _is_ on the Python path, and put the +path to the install location in that file. For example, on my system +there is a file named 'local.pth' in /usr/lib/python2.5/site-packages, +which contains '/usr/local/lib/python2.5/site-packages'. Note that +this is only necessary on machines where XCB is being built. + +Please report any issues you find to the freedesktop.org bug tracker, +at: + + <https://bugs.freedesktop.org/enter_bug.cgi?product=XCB> + +Discussion about XCB occurs on the XCB mailing list: + + <mailto:xcb at lists.freedesktop.org> + <http://lists.freedesktop.org/mailman/listinfo/xcb> + +You can obtain the latest development versions of XCB using GIT. +For anonymous checkouts, use: + + git clone git://anongit.freedesktop.org/git/xcb/proto + +For developers, use: + + git clone git+ssh://git.freedesktop.org/git/xcb/proto diff --git a/libxcb/xcb-proto/TODO b/libxcb/xcb-proto/TODO index 51aac0a92..add693c48 100644 --- a/libxcb/xcb-proto/TODO +++ b/libxcb/xcb-proto/TODO @@ -1,45 +1,45 @@ -Last Updated: 2006-04-27
-
-Extension Status:
-
-X - Present, tested, works.
-U - Present, untested.
-I - Incomplete.
-
-X BIG-REQUESTS
-X COMPOSITE
-X DAMAGE
- DOUBLE-BUFFER
-X DPMS
- Extended-Visual-Information
-X GLX
- LBX
-X MIT-SCREEN-SAVER
-X MIT-SHM
- MIT-SUNDRY-NONSTANDARD
- Multi-Buffering
-X RANDR
-X RECORD
-X RENDER
- SECURITY
- SGI-GLX
-X SHAPE
-X SYNC
- TOG-CUP
-X X-Resource
- XC-APPGROUP
-X XC-MISC
-X XEVIE
-X XFIXES
- XFree86-Bigfont
- XFree86-DGA
-X XFree86-DRI
- XFree86-Misc
- XFree86-VidModeExtension
- XINERAMA
- XInputExtension
- XKEYBOARD
-I XpExtension (XPRINT)
-X XTEST
-X XVideo
-U XVideo-MotionCompensation
+Last Updated: 2006-04-27 + +Extension Status: + +X - Present, tested, works. +U - Present, untested. +I - Incomplete. + +X BIG-REQUESTS +X COMPOSITE +X DAMAGE + DOUBLE-BUFFER +X DPMS + Extended-Visual-Information +X GLX + LBX +X MIT-SCREEN-SAVER +X MIT-SHM + MIT-SUNDRY-NONSTANDARD + Multi-Buffering +X RANDR +X RECORD +X RENDER + SECURITY + SGI-GLX +X SHAPE +X SYNC + TOG-CUP +X X-Resource + XC-APPGROUP +X XC-MISC +X XEVIE +X XFIXES + XFree86-Bigfont + XFree86-DGA +X XFree86-DRI + XFree86-Misc + XFree86-VidModeExtension + XINERAMA + XInputExtension + XKEYBOARD +I XpExtension (XPRINT) +X XTEST +X XVideo +U XVideo-MotionCompensation diff --git a/libxcb/xcb-proto/autogen.sh b/libxcb/xcb-proto/autogen.sh index 6fcae015c..904cd6746 100644 --- a/libxcb/xcb-proto/autogen.sh +++ b/libxcb/xcb-proto/autogen.sh @@ -1,12 +1,12 @@ -#! /bin/sh
-
-srcdir=`dirname $0`
-test -z "$srcdir" && srcdir=.
-
-ORIGDIR=`pwd`
-cd $srcdir
-
-autoreconf -v --install || exit 1
-cd $ORIGDIR || exit $?
-
-$srcdir/configure --enable-maintainer-mode "$@"
+#! /bin/sh + +srcdir=`dirname $0` +test -z "$srcdir" && srcdir=. + +ORIGDIR=`pwd` +cd $srcdir + +autoreconf -v --install || exit 1 +cd $ORIGDIR || exit $? + +$srcdir/configure --enable-maintainer-mode "$@" diff --git a/libxcb/xcb-proto/src/bigreq.xml b/libxcb/xcb-proto/src/bigreq.xml index df1455be9..3cca2f77f 100644 --- a/libxcb/xcb-proto/src/bigreq.xml +++ b/libxcb/xcb-proto/src/bigreq.xml @@ -1,38 +1,38 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2001-2004 Bart Massey, Jamey Sharp, and Josh Triplett.
-All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-<xcb header="bigreq" extension-xname="BIG-REQUESTS"
- extension-name="BigRequests" extension-multiword="true"
- major-version="0" minor-version="0">
-
- <request name="Enable" opcode="0">
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="maximum_request_length" />
- </reply>
- </request>
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2001-2004 Bart Massey, Jamey Sharp, and Josh Triplett. +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> +<xcb header="bigreq" extension-xname="BIG-REQUESTS" + extension-name="BigRequests" extension-multiword="true" + major-version="0" minor-version="0"> + + <request name="Enable" opcode="0"> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="maximum_request_length" /> + </reply> + </request> +</xcb> diff --git a/libxcb/xcb-proto/src/composite.xml b/libxcb/xcb-proto/src/composite.xml index d6e5dc261..d16b6e746 100644 --- a/libxcb/xcb-proto/src/composite.xml +++ b/libxcb/xcb-proto/src/composite.xml @@ -1,98 +1,98 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2004 Josh Triplett. All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-<!-- This file describes version 0.3 of COMPOSITE. -->
-<xcb header="composite" extension-xname="Composite" extension-name="Composite"
- major-version="0" minor-version="3">
-
- <import>xproto</import>
- <import>xfixes</import>
-
- <enum name="Redirect">
- <item name="Automatic" />
- <item name="Manual" />
- </enum>
-
- <request name="QueryVersion" opcode="0">
- <field type="CARD32" name="client_major_version" />
- <field type="CARD32" name="client_minor_version" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="major_version" />
- <field type="CARD32" name="minor_version" />
- <pad bytes="16" />
- </reply>
- </request>
-
- <request name="RedirectWindow" opcode="1">
- <field type="WINDOW" name="window" />
- <field type="CARD8" name="update" enum="Redirect" />
- <pad bytes="3" />
- </request>
-
- <request name="RedirectSubwindows" opcode="2">
- <field type="WINDOW" name="window" />
- <field type="CARD8" name="update" enum="Redirect" />
- <pad bytes="3" />
- </request>
-
- <request name="UnredirectWindow" opcode="3">
- <field type="WINDOW" name="window" />
- <field type="CARD8" name="update" enum="Redirect" />
- <pad bytes="3" />
- </request>
-
- <request name="UnredirectSubwindows" opcode="4">
- <field type="WINDOW" name="window" />
- <field type="CARD8" name="update" enum="Redirect" />
- <pad bytes="3" />
- </request>
-
- <request name="CreateRegionFromBorderClip" opcode="5">
- <field type="REGION" name="region" />
- <field type="WINDOW" name="window" />
- </request>
-
- <request name="NameWindowPixmap" opcode="6">
- <field type="WINDOW" name="window" />
- <field type="PIXMAP" name="pixmap" />
- </request>
-
- <!-- new in version 0.3 -->
-
- <request name="GetOverlayWindow" opcode="7">
- <field type="WINDOW" name="window" />
- <reply>
- <pad bytes="1" />
- <field type="WINDOW" name="overlay_win" />
- <pad bytes="20" />
- </reply>
- </request>
-
- <request name="ReleaseOverlayWindow" opcode="8">
- <field type="WINDOW" name="window" />
- </request>
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2004 Josh Triplett. All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> +<!-- This file describes version 0.3 of COMPOSITE. --> +<xcb header="composite" extension-xname="Composite" extension-name="Composite" + major-version="0" minor-version="3"> + + <import>xproto</import> + <import>xfixes</import> + + <enum name="Redirect"> + <item name="Automatic" /> + <item name="Manual" /> + </enum> + + <request name="QueryVersion" opcode="0"> + <field type="CARD32" name="client_major_version" /> + <field type="CARD32" name="client_minor_version" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="major_version" /> + <field type="CARD32" name="minor_version" /> + <pad bytes="16" /> + </reply> + </request> + + <request name="RedirectWindow" opcode="1"> + <field type="WINDOW" name="window" /> + <field type="CARD8" name="update" enum="Redirect" /> + <pad bytes="3" /> + </request> + + <request name="RedirectSubwindows" opcode="2"> + <field type="WINDOW" name="window" /> + <field type="CARD8" name="update" enum="Redirect" /> + <pad bytes="3" /> + </request> + + <request name="UnredirectWindow" opcode="3"> + <field type="WINDOW" name="window" /> + <field type="CARD8" name="update" enum="Redirect" /> + <pad bytes="3" /> + </request> + + <request name="UnredirectSubwindows" opcode="4"> + <field type="WINDOW" name="window" /> + <field type="CARD8" name="update" enum="Redirect" /> + <pad bytes="3" /> + </request> + + <request name="CreateRegionFromBorderClip" opcode="5"> + <field type="REGION" name="region" /> + <field type="WINDOW" name="window" /> + </request> + + <request name="NameWindowPixmap" opcode="6"> + <field type="WINDOW" name="window" /> + <field type="PIXMAP" name="pixmap" /> + </request> + + <!-- new in version 0.3 --> + + <request name="GetOverlayWindow" opcode="7"> + <field type="WINDOW" name="window" /> + <reply> + <pad bytes="1" /> + <field type="WINDOW" name="overlay_win" /> + <pad bytes="20" /> + </reply> + </request> + + <request name="ReleaseOverlayWindow" opcode="8"> + <field type="WINDOW" name="window" /> + </request> +</xcb> diff --git a/libxcb/xcb-proto/src/damage.xml b/libxcb/xcb-proto/src/damage.xml index 5ac4cebbc..9c5cde5b6 100644 --- a/libxcb/xcb-proto/src/damage.xml +++ b/libxcb/xcb-proto/src/damage.xml @@ -1,87 +1,87 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2004 Josh Triplett
-Copyright (C) 2007 Jeremy Kolb
-All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-<!-- This file describes version 1.1 of DAMAGE. -->
-<xcb header="damage" extension-xname="DAMAGE" extension-name="Damage"
- major-version="1" minor-version="1">
- <import>xproto</import>
- <import>xfixes</import>
-
- <xidtype name="DAMAGE" />
-
- <enum name="ReportLevel">
- <item name="RawRectangles" />
- <item name="DeltaRectangles" />
- <item name="BoundingBox" />
- <item name="NonEmpty" />
- </enum>
-
- <error name="BadDamage" number="0" />
-
- <request name="QueryVersion" opcode="0">
- <field type="CARD32" name="client_major_version" />
- <field type="CARD32" name="client_minor_version" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="major_version" />
- <field type="CARD32" name="minor_version" />
- <pad bytes="16" />
- </reply>
- </request>
-
- <request name="Create" opcode="1">
- <field type="DAMAGE" name="damage" />
- <field type="DRAWABLE" name="drawable" />
- <field type="CARD8" name="level" enum="ReportLevel" />
- <pad bytes="3" />
- </request>
-
- <request name="Destroy" opcode="2">
- <field type="DAMAGE" name="damage" />
- </request>
-
- <request name="Subtract" opcode="3">
- <field type="DAMAGE" name="damage" />
- <field type="REGION" name="repair" altenum="Region" />
- <field type="REGION" name="parts" altenum="Region" />
- </request>
-
- <request name="Add" opcode="4">
- <field type="DRAWABLE" name="drawable" />
- <field type="REGION" name="region" />
- </request>
-
- <event name="Notify" number="0">
- <field type="CARD8" name="level" enum="ReportLevel" />
- <field type="DRAWABLE" name="drawable" />
- <field type="DAMAGE" name="damage" />
- <field type="TIMESTAMP" name="timestamp" />
- <field type="RECTANGLE" name="area" />
- <field type="RECTANGLE" name="geometry" />
- </event>
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2004 Josh Triplett +Copyright (C) 2007 Jeremy Kolb +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> +<!-- This file describes version 1.1 of DAMAGE. --> +<xcb header="damage" extension-xname="DAMAGE" extension-name="Damage" + major-version="1" minor-version="1"> + <import>xproto</import> + <import>xfixes</import> + + <xidtype name="DAMAGE" /> + + <enum name="ReportLevel"> + <item name="RawRectangles" /> + <item name="DeltaRectangles" /> + <item name="BoundingBox" /> + <item name="NonEmpty" /> + </enum> + + <error name="BadDamage" number="0" /> + + <request name="QueryVersion" opcode="0"> + <field type="CARD32" name="client_major_version" /> + <field type="CARD32" name="client_minor_version" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="major_version" /> + <field type="CARD32" name="minor_version" /> + <pad bytes="16" /> + </reply> + </request> + + <request name="Create" opcode="1"> + <field type="DAMAGE" name="damage" /> + <field type="DRAWABLE" name="drawable" /> + <field type="CARD8" name="level" enum="ReportLevel" /> + <pad bytes="3" /> + </request> + + <request name="Destroy" opcode="2"> + <field type="DAMAGE" name="damage" /> + </request> + + <request name="Subtract" opcode="3"> + <field type="DAMAGE" name="damage" /> + <field type="REGION" name="repair" altenum="Region" /> + <field type="REGION" name="parts" altenum="Region" /> + </request> + + <request name="Add" opcode="4"> + <field type="DRAWABLE" name="drawable" /> + <field type="REGION" name="region" /> + </request> + + <event name="Notify" number="0"> + <field type="CARD8" name="level" enum="ReportLevel" /> + <field type="DRAWABLE" name="drawable" /> + <field type="DAMAGE" name="damage" /> + <field type="TIMESTAMP" name="timestamp" /> + <field type="RECTANGLE" name="area" /> + <field type="RECTANGLE" name="geometry" /> + </event> +</xcb> diff --git a/libxcb/xcb-proto/src/dpms.xml b/libxcb/xcb-proto/src/dpms.xml index 32a9fca52..0c2ac2027 100644 --- a/libxcb/xcb-proto/src/dpms.xml +++ b/libxcb/xcb-proto/src/dpms.xml @@ -1,87 +1,87 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2001-2004 Bart Massey, Jamey Sharp, and Josh Triplett.
-All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-<xcb header="dpms" extension-xname="DPMS" extension-name="DPMS"
- major-version="0" minor-version="0">
- <request name="GetVersion" opcode="0">
- <field type="CARD16" name="client_major_version" />
- <field type="CARD16" name="client_minor_version" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="server_major_version" />
- <field type="CARD16" name="server_minor_version" />
- </reply>
- </request>
-
- <request name="Capable" opcode="1">
- <reply>
- <pad bytes="1" />
- <field type="BOOL" name="capable" />
- <pad bytes="23" />
- </reply>
- </request>
-
- <request name="GetTimeouts" opcode="2">
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="standby_timeout" />
- <field type="CARD16" name="suspend_timeout" />
- <field type="CARD16" name="off_timeout" />
- <pad bytes="18" />
- </reply>
- </request>
-
- <request name="SetTimeouts" opcode="3">
- <field type="CARD16" name="standby_timeout" />
- <field type="CARD16" name="suspend_timeout" />
- <field type="CARD16" name="off_timeout" />
- </request>
-
- <request name="Enable" opcode="4" />
-
- <request name="Disable" opcode="5" />
-
- <enum name="DPMSMode">
- <item name="On" />
- <item name="Standby" />
- <item name="Suspend" />
- <item name="Off" />
- </enum>
-
- <request name="ForceLevel" opcode="6">
- <field type="CARD16" name="power_level" enum="DPMSMode" />
- </request>
-
- <request name="Info" opcode="7">
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="power_level" enum="DPMSMode" />
- <field type="BOOL" name="state" />
- <pad bytes="21" />
- </reply>
- </request>
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2001-2004 Bart Massey, Jamey Sharp, and Josh Triplett. +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> +<xcb header="dpms" extension-xname="DPMS" extension-name="DPMS" + major-version="0" minor-version="0"> + <request name="GetVersion" opcode="0"> + <field type="CARD16" name="client_major_version" /> + <field type="CARD16" name="client_minor_version" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="server_major_version" /> + <field type="CARD16" name="server_minor_version" /> + </reply> + </request> + + <request name="Capable" opcode="1"> + <reply> + <pad bytes="1" /> + <field type="BOOL" name="capable" /> + <pad bytes="23" /> + </reply> + </request> + + <request name="GetTimeouts" opcode="2"> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="standby_timeout" /> + <field type="CARD16" name="suspend_timeout" /> + <field type="CARD16" name="off_timeout" /> + <pad bytes="18" /> + </reply> + </request> + + <request name="SetTimeouts" opcode="3"> + <field type="CARD16" name="standby_timeout" /> + <field type="CARD16" name="suspend_timeout" /> + <field type="CARD16" name="off_timeout" /> + </request> + + <request name="Enable" opcode="4" /> + + <request name="Disable" opcode="5" /> + + <enum name="DPMSMode"> + <item name="On" /> + <item name="Standby" /> + <item name="Suspend" /> + <item name="Off" /> + </enum> + + <request name="ForceLevel" opcode="6"> + <field type="CARD16" name="power_level" enum="DPMSMode" /> + </request> + + <request name="Info" opcode="7"> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="power_level" enum="DPMSMode" /> + <field type="BOOL" name="state" /> + <pad bytes="21" /> + </reply> + </request> +</xcb> diff --git a/libxcb/xcb-proto/src/ge.xml b/libxcb/xcb-proto/src/ge.xml index b9ecacc4e..3a6210d97 100644 --- a/libxcb/xcb-proto/src/ge.xml +++ b/libxcb/xcb-proto/src/ge.xml @@ -1,42 +1,42 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2009 Open Text Corporation. All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-<xcb header="ge" extension-xname="Generic Event Extension" extension-name="GenericEvent"
- major-version="1" minor-version="0">
-
- <!-- Version 1 -->
- <request name="QueryVersion" opcode="0">
- <field type="CARD16" name="client_major_version" />
- <field type="CARD16" name="client_minor_version" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="major_version" />
- <field type="CARD16" name="minor_version" />
- <pad bytes="20" />
- </reply>
- </request>
-
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2009 Open Text Corporation. All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> +<xcb header="ge" extension-xname="Generic Event Extension" extension-name="GenericEvent" + major-version="1" minor-version="0"> + + <!-- Version 1 --> + <request name="QueryVersion" opcode="0"> + <field type="CARD16" name="client_major_version" /> + <field type="CARD16" name="client_minor_version" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="major_version" /> + <field type="CARD16" name="minor_version" /> + <pad bytes="20" /> + </reply> + </request> + +</xcb> diff --git a/libxcb/xcb-proto/src/randr.xml b/libxcb/xcb-proto/src/randr.xml index b28372e9c..4f0716f7c 100644 --- a/libxcb/xcb-proto/src/randr.xml +++ b/libxcb/xcb-proto/src/randr.xml @@ -1,671 +1,671 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2006 Jeremy Kolb, Ian Osgood
-All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-
-<xcb header="randr" extension-xname="RANDR" extension-name="RandR"
- major-version="1" minor-version="3">
-
- <import>xproto</import>
- <import>render</import>
-
- <!-- XIDs -->
- <xidtype name="MODE" />
- <xidtype name="CRTC" />
- <xidtype name="OUTPUT" />
-
- <!-- Errors -->
-
- <error name="BadOutput" number="0" />
- <error name="BadCrtc" number="1" />
- <error name="BadMode" number="2" />
-
- <!-- Requests -->
-
- <enum name="Rotation">
- <item name="Rotate_0"> <bit>0</bit></item>
- <item name="Rotate_90"> <bit>1</bit></item>
- <item name="Rotate_180"><bit>2</bit></item>
- <item name="Rotate_270"><bit>3</bit></item>
- <item name="Reflect_X"> <bit>4</bit></item>
- <item name="Reflect_Y"> <bit>5</bit></item>
- </enum>
-
- <struct name="ScreenSize">
- <field type="CARD16" name="width" /> <!-- pixels -->
- <field type="CARD16" name="height" />
- <field type="CARD16" name="mwidth" /> <!-- millimeters -->
- <field type="CARD16" name="mheight" />
- </struct>
-
- <struct name="RefreshRates">
- <field type="CARD16" name="nRates" />
- <list type="CARD16" name="rates">
- <fieldref>nRates</fieldref>
- </list>
- </struct>
-
- <request name="QueryVersion" opcode="0">
- <field type="CARD32" name="major_version" />
- <field type="CARD32" name="minor_version" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="major_version" />
- <field type="CARD32" name="minor_version" />
- <pad bytes="16" />
- </reply>
- </request>
-
- <!-- Skip obsolete opcode 1 so old clients fail immediately -->
-
- <enum name="SetConfig">
- <item name="Success"><value>0</value></item>
- <item name="InvalidConfigTime"><value>1</value></item>
- <item name="InvalidTime"><value>2</value></item>
- <item name="Failed"><value>3</value></item>
- </enum>
-
- <!-- This is for the 1.1 version request. I don't believe we need to specify a 1.0 request
- as few things used randr 1.0. The only difference is the removal of refresh and padding I think.
- BEWARE: the docs lie!
- -->
- <request name="SetScreenConfig" opcode="2">
- <field type="WINDOW" name="window" />
- <field type="TIMESTAMP" name="timestamp" />
- <field type="TIMESTAMP" name="config_timestamp" />
- <field type="CARD16" name="sizeID" />
- <field type="CARD16" name="rotation" mask="Rotation" />
- <field type="CARD16" name="rate" />
- <pad bytes="2" />
- <reply>
- <field type="CARD8" name="status" enum="SetConfig" />
- <field type="TIMESTAMP" name="new_timestamp" />
- <field type="TIMESTAMP" name="config_timestamp" />
- <field type="WINDOW" name="root" />
- <field type="CARD16" name="subpixel_order" enum="SubPixel" />
- <pad bytes="10" />
- </reply>
- </request>
-
- <!-- opcode 3 is obsolete -->
-
- <enum name="NotifyMask" >
- <item name="ScreenChange"> <bit>0</bit></item>
- <!-- new in 1.2 -->
- <item name="CrtcChange"> <bit>1</bit></item>
- <item name="OutputChange"> <bit>2</bit></item>
- <item name="OutputProperty"><bit>3</bit></item>
- </enum>
-
- <request name="SelectInput" opcode="4">
- <field type="WINDOW" name="window" />
- <field type="CARD16" name="enable" mask="NotifyMask" />
- <pad bytes="2" />
- </request>
-
- <!--
- I think this is correct. It works. though I believe nInfo is a bit high...
- -->
- <request name="GetScreenInfo" opcode="5">
- <field type="WINDOW" name="window" />
- <reply>
- <field type="CARD8" name="rotations" mask="Rotation" />
- <field type="WINDOW" name="root" />
- <field type="TIMESTAMP" name="timestamp" />
- <field type="TIMESTAMP" name="config_timestamp" />
- <field type="CARD16" name="nSizes" />
- <field type="CARD16" name="sizeID" />
- <field type="CARD16" name="rotation" mask="Rotation" />
- <field type="CARD16" name="rate" />
- <field type="CARD16" name="nInfo" />
- <pad bytes="2" />
- <list type="ScreenSize" name="sizes">
- <fieldref>nSizes</fieldref>
- </list>
- <list type="RefreshRates" name="rates">
- <op op="-">
- <fieldref>nInfo</fieldref>
- <fieldref>nSizes</fieldref>
- </op>
- </list>
- </reply>
- </request>
-
- <!-- new in version 1.2 -->
-
- <request name="GetScreenSizeRange" opcode="6">
- <field type="WINDOW" name="window" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="min_width" />
- <field type="CARD16" name="min_height" />
- <field type="CARD16" name="max_width" />
- <field type="CARD16" name="max_height" />
- <pad bytes="16" />
- </reply>
- </request>
-
- <request name="SetScreenSize" opcode="7">
- <field type="WINDOW" name="window" />
- <field type="CARD16" name="width" /> <!-- pixels -->
- <field type="CARD16" name="height" />
- <field type="CARD32" name="mm_width" /> <!-- millimeters -->
- <field type="CARD32" name="mm_height" />
- </request>
-
- <!-- for GetScreenResources.ModeInfo.ModeFlag -->
- <enum name="ModeFlag">
- <item name="HsyncPositive"> <bit>0</bit></item>
- <item name="HsyncNegative"> <bit>1</bit></item>
- <item name="VsyncPositive"> <bit>2</bit></item>
- <item name="VsyncNegative"> <bit>3</bit></item>
- <item name="Interlace"> <bit>4</bit></item>
- <item name="DoubleScan"> <bit>5</bit></item>
- <item name="Csync"> <bit>6</bit></item>
- <item name="CsyncPositive"> <bit>7</bit></item>
- <item name="CsyncNegative"> <bit>8</bit></item>
- <item name="HskewPresent"> <bit>9</bit></item>
- <item name="Bcast"> <bit>10</bit></item>
- <item name="PixelMultiplex"><bit>11</bit></item>
- <item name="DoubleClock"> <bit>12</bit></item>
- <item name="HalveClock"> <bit>13</bit></item>
- </enum>
-
- <struct name="ModeInfo">
- <field type="CARD32" name="id" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- <field type="CARD32" name="dot_clock" />
- <field type="CARD16" name="hsync_start" />
- <field type="CARD16" name="hsync_end" />
- <field type="CARD16" name="htotal" />
- <field type="CARD16" name="hskew" />
- <field type="CARD16" name="vsync_start" />
- <field type="CARD16" name="vsync_end" />
- <field type="CARD16" name="vtotal" />
- <field type="CARD16" name="name_len" />
- <field type="CARD32" name="mode_flags" mask="ModeFlag" />
- <!-- the mode name itself -->
- </struct>
-
- <request name="GetScreenResources" opcode="8">
- <field type="WINDOW" name="window" />
- <reply>
- <pad bytes="1" />
- <field type="TIMESTAMP" name="timestamp" />
- <field type="TIMESTAMP" name="config_timestamp" />
- <field type="CARD16" name="num_crtcs" />
- <field type="CARD16" name="num_outputs" />
- <field type="CARD16" name="num_modes" />
- <field type="CARD16" name="names_len" />
- <pad bytes="8" />
- <list type="CRTC" name="crtcs">
- <fieldref>num_crtcs</fieldref>
- </list>
- <list type="OUTPUT" name="outputs">
- <fieldref>num_outputs</fieldref>
- </list>
- <list type="ModeInfo" name="modes">
- <fieldref>num_modes</fieldref>
- </list>
- <!-- FIXME: this is *not* null separated!
- One must use ModeInfo.name_len from each previous
- ModeInfo to infer the position of the name. -->
- <list type="BYTE" name="names">
- <fieldref>names_len</fieldref>
- </list>
- </reply>
- </request>
-
- <!-- for GetOutputInfo.connection -->
- <enum name="Connection">
- <item name="Connected" />
- <item name="Disconnected" />
- <item name="Unknown" />
- </enum>
-
- <request name="GetOutputInfo" opcode="9">
- <field type="OUTPUT" name="output" />
- <field type="TIMESTAMP" name="config_timestamp" />
- <reply>
- <field type="CARD8" name="status" enum="SetConfig" />
- <field type="TIMESTAMP" name="timestamp" />
- <field type="CRTC" name="crtc" />
- <field type="CARD32" name="mm_width" /> <!-- millimeters -->
- <field type="CARD32" name="mm_height" />
- <field type="CARD8" name="connection" enum="Connection" />
- <field type="CARD8" name="subpixel_order" enum="SubPixel" />
- <field type="CARD16" name="num_crtcs" />
- <field type="CARD16" name="num_modes" />
- <field type="CARD16" name="num_preferred" />
- <field type="CARD16" name="num_clones" />
- <field type="CARD16" name="name_len" />
- <list type="CRTC" name="crtcs">
- <fieldref>num_crtcs</fieldref>
- </list>
- <list type="MODE" name="modes">
- <fieldref>num_modes</fieldref>
- </list>
- <list type="OUTPUT" name="clones">
- <fieldref>num_clones</fieldref>
- </list>
- <list type="BYTE" name="name">
- <fieldref>name_len</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="ListOutputProperties" opcode="10">
- <field type="OUTPUT" name="output" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="num_atoms" />
- <pad bytes="22" />
- <list type="ATOM" name="atoms">
- <fieldref>num_atoms</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="QueryOutputProperty" opcode="11">
- <field type="OUTPUT" name="output" />
- <field type="ATOM" name="property" />
- <reply>
- <pad bytes="1" />
- <field type="BOOL" name="pending" />
- <field type="BOOL" name="range" />
- <field type="BOOL" name="immutable" />
- <pad bytes="21" />
- <list type="INT32" name="validValues">
- <fieldref>length</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="ConfigureOutputProperty" opcode="12">
- <field type="OUTPUT" name="output" />
- <field type="ATOM" name="property" />
- <field type="BOOL" name="pending" />
- <field type="BOOL" name="range" />
- <pad bytes="2" />
- <list type="INT32" name="values" />
- </request>
-
- <request name="ChangeOutputProperty" opcode="13">
- <field type="OUTPUT" name="output" />
- <field type="ATOM" name="property" />
- <field type="ATOM" name="type" />
- <field type="CARD8" name="format" />
- <field type="CARD8" name="mode" enum="PropMode" />
- <pad bytes="2" />
- <field type="CARD32" name="num_units" />
- <list type="void" name="data">
- <op op="/">
- <op op="*">
- <fieldref>num_units</fieldref>
- <fieldref>format</fieldref>
- </op>
- <value>8</value>
- </op>
- </list>
- </request>
-
- <request name="DeleteOutputProperty" opcode="14">
- <field type="OUTPUT" name="output" />
- <field type="ATOM" name="property" />
- </request>
-
- <!-- NOTE: num_items depends on format (8/16/32) -->
- <request name="GetOutputProperty" opcode="15">
- <field type="OUTPUT" name="output" />
- <field type="ATOM" name="property" />
- <field type="ATOM" name="type" altenum="GetPropertyType" />
- <field type="CARD32" name="long_offset" />
- <field type="CARD32" name="long_length" />
- <field type="BOOL" name="delete" />
- <field type="BOOL" name="pending" />
- <pad bytes="2" />
- <reply>
- <field type="CARD8" name="format" />
- <field type="ATOM" name="type" altenum="Atom" />
- <field type="CARD32" name="bytes_after" />
- <field type="CARD32" name="num_items" />
- <pad bytes="12" />
- <list type="BYTE" name="data">
- <!-- n * format / 8 -->
- <op op="*">
- <fieldref>num_items</fieldref>
- <op op="/">
- <fieldref>format</fieldref>
- <value>8</value>
- </op>
- </op>
- </list>
- </reply>
- </request>
-
- <request name="CreateMode" opcode="16">
- <field type="WINDOW" name="window" />
- <field type="ModeInfo" name="mode_info" />
- <list type="char" name="name" />
- <reply>
- <pad bytes="1" />
- <field type="MODE" name="mode" />
- <pad bytes="20" />
- </reply>
- </request>
-
- <request name="DestroyMode" opcode="17">
- <field type="MODE" name="mode" />
- </request>
-
- <request name="AddOutputMode" opcode="18">
- <field type="OUTPUT" name="output" />
- <field type="MODE" name="mode" />
- </request>
-
- <request name="DeleteOutputMode" opcode="19">
- <field type="OUTPUT" name="output" />
- <field type="MODE" name="mode" />
- </request>
-
- <request name="GetCrtcInfo" opcode="20">
- <field type="CRTC" name="crtc" />
- <field type="TIMESTAMP" name="config_timestamp" />
- <reply>
- <field type="CARD8" name="status" enum="SetConfig" />
- <field type="TIMESTAMP" name="timestamp" />
- <field type="INT16" name="x" />
- <field type="INT16" name="y" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- <field type="MODE" name="mode" />
- <field type="CARD16" name="rotation" mask="Rotation" />
- <field type="CARD16" name="rotations" mask="Rotation" />
- <field type="CARD16" name="num_outputs" />
- <field type="CARD16" name="num_possible_outputs" />
- <list type="OUTPUT" name="outputs">
- <fieldref>num_outputs</fieldref>
- </list>
- <list type="OUTPUT" name="possible">
- <fieldref>num_possible_outputs</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="SetCrtcConfig" opcode="21">
- <field type="CRTC" name="crtc" />
- <field type="TIMESTAMP" name="timestamp" />
- <field type="TIMESTAMP" name="config_timestamp" />
- <field type="INT16" name="x" />
- <field type="INT16" name="y" />
- <field type="MODE" name="mode" />
- <field type="CARD16" name="rotation" mask="Rotation" />
- <pad bytes="2" />
- <list type="OUTPUT" name="outputs" />
- <reply>
- <field type="CARD8" name="status" enum="SetConfig" />
- <field type="TIMESTAMP" name="timestamp" />
- <pad bytes="20" />
- </reply>
- </request>
-
- <request name="GetCrtcGammaSize" opcode="22">
- <field type="CRTC" name="crtc" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="size" />
- <pad bytes="22" />
- </reply>
- </request>
-
- <request name="GetCrtcGamma" opcode="23">
- <field type="CRTC" name="crtc" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="size" />
- <pad bytes="22" />
- <list type="CARD16" name="red">
- <fieldref>size</fieldref>
- </list>
- <list type="CARD16" name="green">
- <fieldref>size</fieldref>
- </list>
- <list type="CARD16" name="blue">
- <fieldref>size</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="SetCrtcGamma" opcode="24">
- <field type="CRTC" name="crtc" />
- <field type="CARD16" name="size" />
- <pad bytes="2"/>
- <list type="CARD16" name="red">
- <fieldref>size</fieldref>
- </list>
- <list type="CARD16" name="green">
- <fieldref>size</fieldref>
- </list>
- <list type="CARD16" name="blue">
- <fieldref>size</fieldref>
- </list>
- </request>
-
- <!-- new in 1.3 -->
-
- <request name="GetScreenResourcesCurrent" opcode="25">
- <field type="WINDOW" name="window" />
- <reply>
- <pad bytes="1" />
- <field type="TIMESTAMP" name="timestamp" />
- <field type="TIMESTAMP" name="config_timestamp" />
- <field type="CARD16" name="num_crtcs" />
- <field type="CARD16" name="num_outputs" />
- <field type="CARD16" name="num_modes" />
- <field type="CARD16" name="names_len" />
- <pad bytes="8" />
- <list type="CRTC" name="crtcs">
- <fieldref>num_crtcs</fieldref>
- </list>
- <list type="OUTPUT" name="outputs">
- <fieldref>num_outputs</fieldref>
- </list>
- <list type="ModeInfo" name="modes">
- <fieldref>num_modes</fieldref>
- </list>
- <!-- FIXME: this is *not* null separated!
- One must use ModeInfo.name_len from each previous
- ModeInfo to infer the position of the name. -->
- <list type="BYTE" name="names">
- <fieldref>names_len</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="SetCrtcTransform" opcode="26">
- <field type="CRTC" name="crtc" />
- <field type="TRANSFORM" name="transform" />
- <field type="CARD16" name="filter_len" />
- <pad bytes="2" />
- <list type="char" name="filter_name">
- <fieldref>filter_len</fieldref>
- </list>
- <list type="FIXED" name="filter_params" />
- </request>
-
- <request name="GetCrtcTransform" opcode="27">
- <field type="CRTC" name="crtc" />
- <reply>
- <pad bytes="1" />
- <field type="TRANSFORM" name="pending_transform" />
- <field type="BOOL" name="has_transforms" />
- <pad bytes="3" />
- <field type="TRANSFORM" name="current_transform" />
- <pad bytes="4" />
- <field type="CARD16" name="pending_len" />
- <field type="CARD16" name="pending_nparams" />
- <field type="CARD16" name="current_len" />
- <field type="CARD16" name="current_nparams" />
- <list type="char" name="pending_filter_name" >
- <fieldref>pending_len</fieldref>
- </list>
- <list type="FIXED" name="pending_params" >
- <fieldref>pending_nparams</fieldref>
- </list>
- <list type="char" name="current_filter_name" >
- <fieldref>current_len</fieldref>
- </list>
- <list type="FIXED" name="current_params" >
- <fieldref>current_nparams</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="GetPanning" opcode="28">
- <field type="CRTC" name="crtc" />
- <reply>
- <field type="CARD8" name="status" enum="SetConfig" />
- <field type="TIMESTAMP" name="timestamp" />
- <field type="CARD16" name="left" />
- <field type="CARD16" name="top" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- <field type="CARD16" name="track_left" />
- <field type="CARD16" name="track_top" />
- <field type="CARD16" name="track_width" />
- <field type="CARD16" name="track_height" />
- <field type="INT16" name="border_left" />
- <field type="INT16" name="border_top" />
- <field type="INT16" name="border_right" />
- <field type="INT16" name="border_bottom" />
- </reply>
- </request>
-
- <request name="SetPanning" opcode="29">
- <field type="CRTC" name="crtc" />
- <field type="TIMESTAMP" name="timestamp" />
- <field type="CARD16" name="left" />
- <field type="CARD16" name="top" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- <field type="CARD16" name="track_left" />
- <field type="CARD16" name="track_top" />
- <field type="CARD16" name="track_width" />
- <field type="CARD16" name="track_height" />
- <field type="INT16" name="border_left" />
- <field type="INT16" name="border_top" />
- <field type="INT16" name="border_right" />
- <field type="INT16" name="border_bottom" />
- <reply>
- <field type="CARD8" name="status" enum="SetConfig" />
- <field type="TIMESTAMP" name="timestamp" />
- </reply>
- </request>
-
- <request name="SetOutputPrimary" opcode="30">
- <field type="WINDOW" name="window" />
- <field type="OUTPUT" name="output" />
- </request>
-
- <request name="GetOutputPrimary" opcode="31">
- <field type="WINDOW" name="window" />
- <reply>
- <pad bytes="1" />
- <field type="OUTPUT" name="output" />
- </reply>
- </request>
-
- <!-- Events -->
-
- <event name="ScreenChangeNotify" number="0">
- <field type="CARD8" name="rotation" mask="Rotation" />
- <field type="TIMESTAMP" name="timestamp" />
- <field type="TIMESTAMP" name="config_timestamp" />
- <field type="WINDOW" name="root" />
- <field type="WINDOW" name="request_window" />
- <field type="CARD16" name="sizeID" />
- <field type="CARD16" name="subpixel_order" enum="SubPixel" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- <field type="CARD16" name="mwidth" />
- <field type="CARD16" name="mheight" />
- </event>
-
- <!-- New in version 1.2 -->
-
- <!-- subcode -->
- <enum name="Notify" >
- <item name="CrtcChange"> <value>0</value></item>
- <item name="OutputChange"> <value>1</value></item>
- <item name="OutputProperty"><value>2</value></item>
- </enum>
-
- <struct name="CrtcChange">
- <field type="TIMESTAMP" name="timestamp" />
- <field type="WINDOW" name="window" />
- <field type="CRTC" name="crtc" />
- <field type="MODE" name="mode" />
- <field type="CARD16" name="rotation" mask="Rotation" />
- <pad bytes="2" />
- <field type="INT16" name="x" />
- <field type="INT16" name="y" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- </struct>
-
- <struct name="OutputChange">
- <field type="TIMESTAMP" name="timestamp" />
- <field type="TIMESTAMP" name="config_timestamp" />
- <field type="WINDOW" name="window" />
- <field type="OUTPUT" name="output" />
- <field type="CRTC" name="crtc" />
- <field type="MODE" name="mode" />
- <field type="CARD16" name="rotation" mask="Rotation" />
- <field type="CARD8" name="connection" enum="Connection" />
- <field type="CARD8" name="subpixel_order" enum="SubPixel" />
- </struct>
-
- <struct name="OutputProperty">
- <field type="WINDOW" name="window" />
- <field type="OUTPUT" name="output" />
- <field type="ATOM" name="atom" />
- <field type="TIMESTAMP" name="timestamp" />
- <field type="CARD8" name="status" enum="Property" />
- <pad bytes="11" />
- </struct>
-
- <union name="NotifyData">
- <field type="CrtcChange" name="cc" />
- <field type="OutputChange" name="oc" />
- <field type="OutputProperty" name="op" />
- </union>
-
- <event name="Notify" number="1">
- <field type="CARD8" name="subCode" enum="Notify" />
- <field type="NotifyData" name="u" />
- </event>
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2006 Jeremy Kolb, Ian Osgood +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> + +<xcb header="randr" extension-xname="RANDR" extension-name="RandR" + major-version="1" minor-version="3"> + + <import>xproto</import> + <import>render</import> + + <!-- XIDs --> + <xidtype name="MODE" /> + <xidtype name="CRTC" /> + <xidtype name="OUTPUT" /> + + <!-- Errors --> + + <error name="BadOutput" number="0" /> + <error name="BadCrtc" number="1" /> + <error name="BadMode" number="2" /> + + <!-- Requests --> + + <enum name="Rotation"> + <item name="Rotate_0"> <bit>0</bit></item> + <item name="Rotate_90"> <bit>1</bit></item> + <item name="Rotate_180"><bit>2</bit></item> + <item name="Rotate_270"><bit>3</bit></item> + <item name="Reflect_X"> <bit>4</bit></item> + <item name="Reflect_Y"> <bit>5</bit></item> + </enum> + + <struct name="ScreenSize"> + <field type="CARD16" name="width" /> <!-- pixels --> + <field type="CARD16" name="height" /> + <field type="CARD16" name="mwidth" /> <!-- millimeters --> + <field type="CARD16" name="mheight" /> + </struct> + + <struct name="RefreshRates"> + <field type="CARD16" name="nRates" /> + <list type="CARD16" name="rates"> + <fieldref>nRates</fieldref> + </list> + </struct> + + <request name="QueryVersion" opcode="0"> + <field type="CARD32" name="major_version" /> + <field type="CARD32" name="minor_version" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="major_version" /> + <field type="CARD32" name="minor_version" /> + <pad bytes="16" /> + </reply> + </request> + + <!-- Skip obsolete opcode 1 so old clients fail immediately --> + + <enum name="SetConfig"> + <item name="Success"><value>0</value></item> + <item name="InvalidConfigTime"><value>1</value></item> + <item name="InvalidTime"><value>2</value></item> + <item name="Failed"><value>3</value></item> + </enum> + + <!-- This is for the 1.1 version request. I don't believe we need to specify a 1.0 request + as few things used randr 1.0. The only difference is the removal of refresh and padding I think. + BEWARE: the docs lie! + --> + <request name="SetScreenConfig" opcode="2"> + <field type="WINDOW" name="window" /> + <field type="TIMESTAMP" name="timestamp" /> + <field type="TIMESTAMP" name="config_timestamp" /> + <field type="CARD16" name="sizeID" /> + <field type="CARD16" name="rotation" mask="Rotation" /> + <field type="CARD16" name="rate" /> + <pad bytes="2" /> + <reply> + <field type="CARD8" name="status" enum="SetConfig" /> + <field type="TIMESTAMP" name="new_timestamp" /> + <field type="TIMESTAMP" name="config_timestamp" /> + <field type="WINDOW" name="root" /> + <field type="CARD16" name="subpixel_order" enum="SubPixel" /> + <pad bytes="10" /> + </reply> + </request> + + <!-- opcode 3 is obsolete --> + + <enum name="NotifyMask" > + <item name="ScreenChange"> <bit>0</bit></item> + <!-- new in 1.2 --> + <item name="CrtcChange"> <bit>1</bit></item> + <item name="OutputChange"> <bit>2</bit></item> + <item name="OutputProperty"><bit>3</bit></item> + </enum> + + <request name="SelectInput" opcode="4"> + <field type="WINDOW" name="window" /> + <field type="CARD16" name="enable" mask="NotifyMask" /> + <pad bytes="2" /> + </request> + + <!-- + I think this is correct. It works. though I believe nInfo is a bit high... + --> + <request name="GetScreenInfo" opcode="5"> + <field type="WINDOW" name="window" /> + <reply> + <field type="CARD8" name="rotations" mask="Rotation" /> + <field type="WINDOW" name="root" /> + <field type="TIMESTAMP" name="timestamp" /> + <field type="TIMESTAMP" name="config_timestamp" /> + <field type="CARD16" name="nSizes" /> + <field type="CARD16" name="sizeID" /> + <field type="CARD16" name="rotation" mask="Rotation" /> + <field type="CARD16" name="rate" /> + <field type="CARD16" name="nInfo" /> + <pad bytes="2" /> + <list type="ScreenSize" name="sizes"> + <fieldref>nSizes</fieldref> + </list> + <list type="RefreshRates" name="rates"> + <op op="-"> + <fieldref>nInfo</fieldref> + <fieldref>nSizes</fieldref> + </op> + </list> + </reply> + </request> + + <!-- new in version 1.2 --> + + <request name="GetScreenSizeRange" opcode="6"> + <field type="WINDOW" name="window" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="min_width" /> + <field type="CARD16" name="min_height" /> + <field type="CARD16" name="max_width" /> + <field type="CARD16" name="max_height" /> + <pad bytes="16" /> + </reply> + </request> + + <request name="SetScreenSize" opcode="7"> + <field type="WINDOW" name="window" /> + <field type="CARD16" name="width" /> <!-- pixels --> + <field type="CARD16" name="height" /> + <field type="CARD32" name="mm_width" /> <!-- millimeters --> + <field type="CARD32" name="mm_height" /> + </request> + + <!-- for GetScreenResources.ModeInfo.ModeFlag --> + <enum name="ModeFlag"> + <item name="HsyncPositive"> <bit>0</bit></item> + <item name="HsyncNegative"> <bit>1</bit></item> + <item name="VsyncPositive"> <bit>2</bit></item> + <item name="VsyncNegative"> <bit>3</bit></item> + <item name="Interlace"> <bit>4</bit></item> + <item name="DoubleScan"> <bit>5</bit></item> + <item name="Csync"> <bit>6</bit></item> + <item name="CsyncPositive"> <bit>7</bit></item> + <item name="CsyncNegative"> <bit>8</bit></item> + <item name="HskewPresent"> <bit>9</bit></item> + <item name="Bcast"> <bit>10</bit></item> + <item name="PixelMultiplex"><bit>11</bit></item> + <item name="DoubleClock"> <bit>12</bit></item> + <item name="HalveClock"> <bit>13</bit></item> + </enum> + + <struct name="ModeInfo"> + <field type="CARD32" name="id" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + <field type="CARD32" name="dot_clock" /> + <field type="CARD16" name="hsync_start" /> + <field type="CARD16" name="hsync_end" /> + <field type="CARD16" name="htotal" /> + <field type="CARD16" name="hskew" /> + <field type="CARD16" name="vsync_start" /> + <field type="CARD16" name="vsync_end" /> + <field type="CARD16" name="vtotal" /> + <field type="CARD16" name="name_len" /> + <field type="CARD32" name="mode_flags" mask="ModeFlag" /> + <!-- the mode name itself --> + </struct> + + <request name="GetScreenResources" opcode="8"> + <field type="WINDOW" name="window" /> + <reply> + <pad bytes="1" /> + <field type="TIMESTAMP" name="timestamp" /> + <field type="TIMESTAMP" name="config_timestamp" /> + <field type="CARD16" name="num_crtcs" /> + <field type="CARD16" name="num_outputs" /> + <field type="CARD16" name="num_modes" /> + <field type="CARD16" name="names_len" /> + <pad bytes="8" /> + <list type="CRTC" name="crtcs"> + <fieldref>num_crtcs</fieldref> + </list> + <list type="OUTPUT" name="outputs"> + <fieldref>num_outputs</fieldref> + </list> + <list type="ModeInfo" name="modes"> + <fieldref>num_modes</fieldref> + </list> + <!-- FIXME: this is *not* null separated! + One must use ModeInfo.name_len from each previous + ModeInfo to infer the position of the name. --> + <list type="BYTE" name="names"> + <fieldref>names_len</fieldref> + </list> + </reply> + </request> + + <!-- for GetOutputInfo.connection --> + <enum name="Connection"> + <item name="Connected" /> + <item name="Disconnected" /> + <item name="Unknown" /> + </enum> + + <request name="GetOutputInfo" opcode="9"> + <field type="OUTPUT" name="output" /> + <field type="TIMESTAMP" name="config_timestamp" /> + <reply> + <field type="CARD8" name="status" enum="SetConfig" /> + <field type="TIMESTAMP" name="timestamp" /> + <field type="CRTC" name="crtc" /> + <field type="CARD32" name="mm_width" /> <!-- millimeters --> + <field type="CARD32" name="mm_height" /> + <field type="CARD8" name="connection" enum="Connection" /> + <field type="CARD8" name="subpixel_order" enum="SubPixel" /> + <field type="CARD16" name="num_crtcs" /> + <field type="CARD16" name="num_modes" /> + <field type="CARD16" name="num_preferred" /> + <field type="CARD16" name="num_clones" /> + <field type="CARD16" name="name_len" /> + <list type="CRTC" name="crtcs"> + <fieldref>num_crtcs</fieldref> + </list> + <list type="MODE" name="modes"> + <fieldref>num_modes</fieldref> + </list> + <list type="OUTPUT" name="clones"> + <fieldref>num_clones</fieldref> + </list> + <list type="BYTE" name="name"> + <fieldref>name_len</fieldref> + </list> + </reply> + </request> + + <request name="ListOutputProperties" opcode="10"> + <field type="OUTPUT" name="output" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="num_atoms" /> + <pad bytes="22" /> + <list type="ATOM" name="atoms"> + <fieldref>num_atoms</fieldref> + </list> + </reply> + </request> + + <request name="QueryOutputProperty" opcode="11"> + <field type="OUTPUT" name="output" /> + <field type="ATOM" name="property" /> + <reply> + <pad bytes="1" /> + <field type="BOOL" name="pending" /> + <field type="BOOL" name="range" /> + <field type="BOOL" name="immutable" /> + <pad bytes="21" /> + <list type="INT32" name="validValues"> + <fieldref>length</fieldref> + </list> + </reply> + </request> + + <request name="ConfigureOutputProperty" opcode="12"> + <field type="OUTPUT" name="output" /> + <field type="ATOM" name="property" /> + <field type="BOOL" name="pending" /> + <field type="BOOL" name="range" /> + <pad bytes="2" /> + <list type="INT32" name="values" /> + </request> + + <request name="ChangeOutputProperty" opcode="13"> + <field type="OUTPUT" name="output" /> + <field type="ATOM" name="property" /> + <field type="ATOM" name="type" /> + <field type="CARD8" name="format" /> + <field type="CARD8" name="mode" enum="PropMode" /> + <pad bytes="2" /> + <field type="CARD32" name="num_units" /> + <list type="void" name="data"> + <op op="/"> + <op op="*"> + <fieldref>num_units</fieldref> + <fieldref>format</fieldref> + </op> + <value>8</value> + </op> + </list> + </request> + + <request name="DeleteOutputProperty" opcode="14"> + <field type="OUTPUT" name="output" /> + <field type="ATOM" name="property" /> + </request> + + <!-- NOTE: num_items depends on format (8/16/32) --> + <request name="GetOutputProperty" opcode="15"> + <field type="OUTPUT" name="output" /> + <field type="ATOM" name="property" /> + <field type="ATOM" name="type" altenum="GetPropertyType" /> + <field type="CARD32" name="long_offset" /> + <field type="CARD32" name="long_length" /> + <field type="BOOL" name="delete" /> + <field type="BOOL" name="pending" /> + <pad bytes="2" /> + <reply> + <field type="CARD8" name="format" /> + <field type="ATOM" name="type" altenum="Atom" /> + <field type="CARD32" name="bytes_after" /> + <field type="CARD32" name="num_items" /> + <pad bytes="12" /> + <list type="BYTE" name="data"> + <!-- n * format / 8 --> + <op op="*"> + <fieldref>num_items</fieldref> + <op op="/"> + <fieldref>format</fieldref> + <value>8</value> + </op> + </op> + </list> + </reply> + </request> + + <request name="CreateMode" opcode="16"> + <field type="WINDOW" name="window" /> + <field type="ModeInfo" name="mode_info" /> + <list type="char" name="name" /> + <reply> + <pad bytes="1" /> + <field type="MODE" name="mode" /> + <pad bytes="20" /> + </reply> + </request> + + <request name="DestroyMode" opcode="17"> + <field type="MODE" name="mode" /> + </request> + + <request name="AddOutputMode" opcode="18"> + <field type="OUTPUT" name="output" /> + <field type="MODE" name="mode" /> + </request> + + <request name="DeleteOutputMode" opcode="19"> + <field type="OUTPUT" name="output" /> + <field type="MODE" name="mode" /> + </request> + + <request name="GetCrtcInfo" opcode="20"> + <field type="CRTC" name="crtc" /> + <field type="TIMESTAMP" name="config_timestamp" /> + <reply> + <field type="CARD8" name="status" enum="SetConfig" /> + <field type="TIMESTAMP" name="timestamp" /> + <field type="INT16" name="x" /> + <field type="INT16" name="y" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + <field type="MODE" name="mode" /> + <field type="CARD16" name="rotation" mask="Rotation" /> + <field type="CARD16" name="rotations" mask="Rotation" /> + <field type="CARD16" name="num_outputs" /> + <field type="CARD16" name="num_possible_outputs" /> + <list type="OUTPUT" name="outputs"> + <fieldref>num_outputs</fieldref> + </list> + <list type="OUTPUT" name="possible"> + <fieldref>num_possible_outputs</fieldref> + </list> + </reply> + </request> + + <request name="SetCrtcConfig" opcode="21"> + <field type="CRTC" name="crtc" /> + <field type="TIMESTAMP" name="timestamp" /> + <field type="TIMESTAMP" name="config_timestamp" /> + <field type="INT16" name="x" /> + <field type="INT16" name="y" /> + <field type="MODE" name="mode" /> + <field type="CARD16" name="rotation" mask="Rotation" /> + <pad bytes="2" /> + <list type="OUTPUT" name="outputs" /> + <reply> + <field type="CARD8" name="status" enum="SetConfig" /> + <field type="TIMESTAMP" name="timestamp" /> + <pad bytes="20" /> + </reply> + </request> + + <request name="GetCrtcGammaSize" opcode="22"> + <field type="CRTC" name="crtc" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="size" /> + <pad bytes="22" /> + </reply> + </request> + + <request name="GetCrtcGamma" opcode="23"> + <field type="CRTC" name="crtc" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="size" /> + <pad bytes="22" /> + <list type="CARD16" name="red"> + <fieldref>size</fieldref> + </list> + <list type="CARD16" name="green"> + <fieldref>size</fieldref> + </list> + <list type="CARD16" name="blue"> + <fieldref>size</fieldref> + </list> + </reply> + </request> + + <request name="SetCrtcGamma" opcode="24"> + <field type="CRTC" name="crtc" /> + <field type="CARD16" name="size" /> + <pad bytes="2"/> + <list type="CARD16" name="red"> + <fieldref>size</fieldref> + </list> + <list type="CARD16" name="green"> + <fieldref>size</fieldref> + </list> + <list type="CARD16" name="blue"> + <fieldref>size</fieldref> + </list> + </request> + + <!-- new in 1.3 --> + + <request name="GetScreenResourcesCurrent" opcode="25"> + <field type="WINDOW" name="window" /> + <reply> + <pad bytes="1" /> + <field type="TIMESTAMP" name="timestamp" /> + <field type="TIMESTAMP" name="config_timestamp" /> + <field type="CARD16" name="num_crtcs" /> + <field type="CARD16" name="num_outputs" /> + <field type="CARD16" name="num_modes" /> + <field type="CARD16" name="names_len" /> + <pad bytes="8" /> + <list type="CRTC" name="crtcs"> + <fieldref>num_crtcs</fieldref> + </list> + <list type="OUTPUT" name="outputs"> + <fieldref>num_outputs</fieldref> + </list> + <list type="ModeInfo" name="modes"> + <fieldref>num_modes</fieldref> + </list> + <!-- FIXME: this is *not* null separated! + One must use ModeInfo.name_len from each previous + ModeInfo to infer the position of the name. --> + <list type="BYTE" name="names"> + <fieldref>names_len</fieldref> + </list> + </reply> + </request> + + <request name="SetCrtcTransform" opcode="26"> + <field type="CRTC" name="crtc" /> + <field type="TRANSFORM" name="transform" /> + <field type="CARD16" name="filter_len" /> + <pad bytes="2" /> + <list type="char" name="filter_name"> + <fieldref>filter_len</fieldref> + </list> + <list type="FIXED" name="filter_params" /> + </request> + + <request name="GetCrtcTransform" opcode="27"> + <field type="CRTC" name="crtc" /> + <reply> + <pad bytes="1" /> + <field type="TRANSFORM" name="pending_transform" /> + <field type="BOOL" name="has_transforms" /> + <pad bytes="3" /> + <field type="TRANSFORM" name="current_transform" /> + <pad bytes="4" /> + <field type="CARD16" name="pending_len" /> + <field type="CARD16" name="pending_nparams" /> + <field type="CARD16" name="current_len" /> + <field type="CARD16" name="current_nparams" /> + <list type="char" name="pending_filter_name" > + <fieldref>pending_len</fieldref> + </list> + <list type="FIXED" name="pending_params" > + <fieldref>pending_nparams</fieldref> + </list> + <list type="char" name="current_filter_name" > + <fieldref>current_len</fieldref> + </list> + <list type="FIXED" name="current_params" > + <fieldref>current_nparams</fieldref> + </list> + </reply> + </request> + + <request name="GetPanning" opcode="28"> + <field type="CRTC" name="crtc" /> + <reply> + <field type="CARD8" name="status" enum="SetConfig" /> + <field type="TIMESTAMP" name="timestamp" /> + <field type="CARD16" name="left" /> + <field type="CARD16" name="top" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + <field type="CARD16" name="track_left" /> + <field type="CARD16" name="track_top" /> + <field type="CARD16" name="track_width" /> + <field type="CARD16" name="track_height" /> + <field type="INT16" name="border_left" /> + <field type="INT16" name="border_top" /> + <field type="INT16" name="border_right" /> + <field type="INT16" name="border_bottom" /> + </reply> + </request> + + <request name="SetPanning" opcode="29"> + <field type="CRTC" name="crtc" /> + <field type="TIMESTAMP" name="timestamp" /> + <field type="CARD16" name="left" /> + <field type="CARD16" name="top" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + <field type="CARD16" name="track_left" /> + <field type="CARD16" name="track_top" /> + <field type="CARD16" name="track_width" /> + <field type="CARD16" name="track_height" /> + <field type="INT16" name="border_left" /> + <field type="INT16" name="border_top" /> + <field type="INT16" name="border_right" /> + <field type="INT16" name="border_bottom" /> + <reply> + <field type="CARD8" name="status" enum="SetConfig" /> + <field type="TIMESTAMP" name="timestamp" /> + </reply> + </request> + + <request name="SetOutputPrimary" opcode="30"> + <field type="WINDOW" name="window" /> + <field type="OUTPUT" name="output" /> + </request> + + <request name="GetOutputPrimary" opcode="31"> + <field type="WINDOW" name="window" /> + <reply> + <pad bytes="1" /> + <field type="OUTPUT" name="output" /> + </reply> + </request> + + <!-- Events --> + + <event name="ScreenChangeNotify" number="0"> + <field type="CARD8" name="rotation" mask="Rotation" /> + <field type="TIMESTAMP" name="timestamp" /> + <field type="TIMESTAMP" name="config_timestamp" /> + <field type="WINDOW" name="root" /> + <field type="WINDOW" name="request_window" /> + <field type="CARD16" name="sizeID" /> + <field type="CARD16" name="subpixel_order" enum="SubPixel" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + <field type="CARD16" name="mwidth" /> + <field type="CARD16" name="mheight" /> + </event> + + <!-- New in version 1.2 --> + + <!-- subcode --> + <enum name="Notify" > + <item name="CrtcChange"> <value>0</value></item> + <item name="OutputChange"> <value>1</value></item> + <item name="OutputProperty"><value>2</value></item> + </enum> + + <struct name="CrtcChange"> + <field type="TIMESTAMP" name="timestamp" /> + <field type="WINDOW" name="window" /> + <field type="CRTC" name="crtc" /> + <field type="MODE" name="mode" /> + <field type="CARD16" name="rotation" mask="Rotation" /> + <pad bytes="2" /> + <field type="INT16" name="x" /> + <field type="INT16" name="y" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + </struct> + + <struct name="OutputChange"> + <field type="TIMESTAMP" name="timestamp" /> + <field type="TIMESTAMP" name="config_timestamp" /> + <field type="WINDOW" name="window" /> + <field type="OUTPUT" name="output" /> + <field type="CRTC" name="crtc" /> + <field type="MODE" name="mode" /> + <field type="CARD16" name="rotation" mask="Rotation" /> + <field type="CARD8" name="connection" enum="Connection" /> + <field type="CARD8" name="subpixel_order" enum="SubPixel" /> + </struct> + + <struct name="OutputProperty"> + <field type="WINDOW" name="window" /> + <field type="OUTPUT" name="output" /> + <field type="ATOM" name="atom" /> + <field type="TIMESTAMP" name="timestamp" /> + <field type="CARD8" name="status" enum="Property" /> + <pad bytes="11" /> + </struct> + + <union name="NotifyData"> + <field type="CrtcChange" name="cc" /> + <field type="OutputChange" name="oc" /> + <field type="OutputProperty" name="op" /> + </union> + + <event name="Notify" number="1"> + <field type="CARD8" name="subCode" enum="Notify" /> + <field type="NotifyData" name="u" /> + </event> +</xcb> diff --git a/libxcb/xcb-proto/src/record.xml b/libxcb/xcb-proto/src/record.xml index 11fb9fc6a..74c16fe5b 100644 --- a/libxcb/xcb-proto/src/record.xml +++ b/libxcb/xcb-proto/src/record.xml @@ -1,178 +1,178 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2005 Jeremy Kolb.
-All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person ob/Sintaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-
-<xcb header="record" extension-xname="RECORD" extension-name="Record"
- major-version="1" minor-version="13">
-
- <!-- Types -->
- <xidtype name="CONTEXT" />
-
- <struct name="Range8">
- <field type="CARD8" name="first" />
- <field type="CARD8" name="last" />
- </struct>
-
- <struct name="Range16">
- <field type="CARD16" name="first" />
- <field type="CARD16" name="last" />
- </struct>
-
- <struct name="ExtRange">
- <field type="Range8" name="major" />
- <field type="Range16" name="minor" />
- </struct>
-
- <struct name="Range">
- <field type="Range8" name="core_requests" />
- <field type="Range8" name="core_replies" />
- <field type="ExtRange" name="ext_requests" />
- <field type="ExtRange" name="ext_replies" />
- <field type="Range8" name="delivered_events" />
- <field type="Range8" name="device_events" />
- <field type="Range8" name="errors" />
- <field type="BOOL" name="client_started" />
- <field type="BOOL" name="client_died" />
- </struct>
-
- <typedef oldname="CARD8" newname="ElementHeader" />
- <enum name="HType">
- <item name="FromServerTime"><bit>0</bit></item>
- <item name="FromClientTime"><bit>1</bit></item>
- <item name="FromClientSequence"><bit>2</bit></item>
- </enum>
-
- <typedef oldname="CARD32" newname="ClientSpec" />
- <enum name="CS">
- <item name="CurrentClients"><value>1</value></item>
- <item name="FutureClients"><value>2</value></item>
- <item name="AllClients"><value>3</value></item>
- </enum>
-
- <struct name="ClientInfo">
- <field type="ClientSpec" name="client_resource" />
- <field type="CARD32" name="num_ranges" />
- <list type="Range" name="ranges">
- <fieldref>num_ranges</fieldref>
- </list>
- </struct>
-
- <!-- Errors -->
- <error name="BadContext" number="0">
- <field type="CARD32" name="invalid_record" />
- </error>
-
- <!-- Requests -->
- <request name="QueryVersion" opcode="0">
- <field type="CARD16" name="major_version" />
- <field type="CARD16" name="minor_version" />
- <reply>
- <pad bytes="1"/>
- <field type="CARD16" name="major_version" />
- <field type="CARD16" name="minor_version" />
- </reply>
- </request>
-
- <request name="CreateContext" opcode="1">
- <field type="record:CONTEXT" name="context" />
- <field type="ElementHeader" name="element_header" />
- <pad bytes="3" />
- <field type="CARD32" name="num_client_specs" />
- <field type="CARD32" name="num_ranges" />
- <list type="ClientSpec" name="client_specs">
- <fieldref>num_client_specs</fieldref>
- </list>
- <list type="Range" name="ranges">
- <fieldref>num_ranges</fieldref>
- </list>
- </request>
-
- <request name="RegisterClients" opcode="2">
- <field type="record:CONTEXT" name="context" />
- <field type="ElementHeader" name="element_header" />
- <pad bytes="3" />
- <field type="CARD32" name="num_client_specs" />
- <field type="CARD32" name="num_ranges" />
- <list type="ClientSpec" name="client_specs">
- <fieldref>num_client_specs</fieldref>
- </list>
- <list type="Range" name="ranges">
- <fieldref>num_ranges</fieldref>
- </list>
- </request>
-
- <request name="UnregisterClients" opcode="3">
- <field type="record:CONTEXT" name="context" />
- <field type="CARD32" name="num_client_specs" />
- <list type="ClientSpec" name="client_specs">
- <fieldref>num_client_specs</fieldref>
- </list>
- </request>
-
- <request name="GetContext" opcode="4">
- <field type="record:CONTEXT" name="context" />
- <reply>
- <field type="BOOL" name="enabled" />
- <field type="ElementHeader" name="element_header" />
- <pad bytes="3" />
- <field type="CARD32" name="num_intercepted_clients" />
- <pad bytes="16" />
- <list type="ClientInfo" name="intercepted_clients">
- <fieldref>num_intercepted_clients</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="EnableContext" opcode="5">
- <field type="record:CONTEXT" name="context" />
- <reply>
- <field type="CARD8" name="category" />
- <field type="ElementHeader" name="element_header" />
- <field type="BOOL" name="client_swapped" />
- <pad bytes="2" />
- <field type="CARD32" name="xid_base" />
- <field type="CARD32" name="server_time" />
- <field type="CARD32" name="rec_sequence_num" />
- <pad bytes="8" />
- <list type="BYTE" name="data">
- <op op="*">
- <fieldref>length</fieldref>
- <value>4</value>
- </op>
- </list>
- </reply>
- </request>
-
- <request name="DisableContext" opcode="6">
- <field type="record:CONTEXT" name="context" />
- </request>
-
- <request name="FreeContext" opcode="7">
- <field type="record:CONTEXT" name="context" />
- </request>
-
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2005 Jeremy Kolb. +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person ob/Sintaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> + +<xcb header="record" extension-xname="RECORD" extension-name="Record" + major-version="1" minor-version="13"> + + <!-- Types --> + <xidtype name="CONTEXT" /> + + <struct name="Range8"> + <field type="CARD8" name="first" /> + <field type="CARD8" name="last" /> + </struct> + + <struct name="Range16"> + <field type="CARD16" name="first" /> + <field type="CARD16" name="last" /> + </struct> + + <struct name="ExtRange"> + <field type="Range8" name="major" /> + <field type="Range16" name="minor" /> + </struct> + + <struct name="Range"> + <field type="Range8" name="core_requests" /> + <field type="Range8" name="core_replies" /> + <field type="ExtRange" name="ext_requests" /> + <field type="ExtRange" name="ext_replies" /> + <field type="Range8" name="delivered_events" /> + <field type="Range8" name="device_events" /> + <field type="Range8" name="errors" /> + <field type="BOOL" name="client_started" /> + <field type="BOOL" name="client_died" /> + </struct> + + <typedef oldname="CARD8" newname="ElementHeader" /> + <enum name="HType"> + <item name="FromServerTime"><bit>0</bit></item> + <item name="FromClientTime"><bit>1</bit></item> + <item name="FromClientSequence"><bit>2</bit></item> + </enum> + + <typedef oldname="CARD32" newname="ClientSpec" /> + <enum name="CS"> + <item name="CurrentClients"><value>1</value></item> + <item name="FutureClients"><value>2</value></item> + <item name="AllClients"><value>3</value></item> + </enum> + + <struct name="ClientInfo"> + <field type="ClientSpec" name="client_resource" /> + <field type="CARD32" name="num_ranges" /> + <list type="Range" name="ranges"> + <fieldref>num_ranges</fieldref> + </list> + </struct> + + <!-- Errors --> + <error name="BadContext" number="0"> + <field type="CARD32" name="invalid_record" /> + </error> + + <!-- Requests --> + <request name="QueryVersion" opcode="0"> + <field type="CARD16" name="major_version" /> + <field type="CARD16" name="minor_version" /> + <reply> + <pad bytes="1"/> + <field type="CARD16" name="major_version" /> + <field type="CARD16" name="minor_version" /> + </reply> + </request> + + <request name="CreateContext" opcode="1"> + <field type="record:CONTEXT" name="context" /> + <field type="ElementHeader" name="element_header" /> + <pad bytes="3" /> + <field type="CARD32" name="num_client_specs" /> + <field type="CARD32" name="num_ranges" /> + <list type="ClientSpec" name="client_specs"> + <fieldref>num_client_specs</fieldref> + </list> + <list type="Range" name="ranges"> + <fieldref>num_ranges</fieldref> + </list> + </request> + + <request name="RegisterClients" opcode="2"> + <field type="record:CONTEXT" name="context" /> + <field type="ElementHeader" name="element_header" /> + <pad bytes="3" /> + <field type="CARD32" name="num_client_specs" /> + <field type="CARD32" name="num_ranges" /> + <list type="ClientSpec" name="client_specs"> + <fieldref>num_client_specs</fieldref> + </list> + <list type="Range" name="ranges"> + <fieldref>num_ranges</fieldref> + </list> + </request> + + <request name="UnregisterClients" opcode="3"> + <field type="record:CONTEXT" name="context" /> + <field type="CARD32" name="num_client_specs" /> + <list type="ClientSpec" name="client_specs"> + <fieldref>num_client_specs</fieldref> + </list> + </request> + + <request name="GetContext" opcode="4"> + <field type="record:CONTEXT" name="context" /> + <reply> + <field type="BOOL" name="enabled" /> + <field type="ElementHeader" name="element_header" /> + <pad bytes="3" /> + <field type="CARD32" name="num_intercepted_clients" /> + <pad bytes="16" /> + <list type="ClientInfo" name="intercepted_clients"> + <fieldref>num_intercepted_clients</fieldref> + </list> + </reply> + </request> + + <request name="EnableContext" opcode="5"> + <field type="record:CONTEXT" name="context" /> + <reply> + <field type="CARD8" name="category" /> + <field type="ElementHeader" name="element_header" /> + <field type="BOOL" name="client_swapped" /> + <pad bytes="2" /> + <field type="CARD32" name="xid_base" /> + <field type="CARD32" name="server_time" /> + <field type="CARD32" name="rec_sequence_num" /> + <pad bytes="8" /> + <list type="BYTE" name="data"> + <op op="*"> + <fieldref>length</fieldref> + <value>4</value> + </op> + </list> + </reply> + </request> + + <request name="DisableContext" opcode="6"> + <field type="record:CONTEXT" name="context" /> + </request> + + <request name="FreeContext" opcode="7"> + <field type="record:CONTEXT" name="context" /> + </request> + +</xcb> diff --git a/libxcb/xcb-proto/src/res.xml b/libxcb/xcb-proto/src/res.xml index fed2cf712..d758d893b 100644 --- a/libxcb/xcb-proto/src/res.xml +++ b/libxcb/xcb-proto/src/res.xml @@ -1,83 +1,83 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2006 Jeremy Kolb
-All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-<xcb header="res" extension-xname="X-Resource" extension-name="Res"
- major-version="1" minor-version="0">
- <import>xproto</import>
-
- <struct name="Client">
- <field type="CARD32" name="resource_base" />
- <field type="CARD32" name="resource_mask" />
- </struct>
-
- <struct name="Type">
- <field type="ATOM" name="resource_type" />
- <field type="CARD32" name="count" />
- </struct>
-
- <request name="QueryVersion" opcode="0">
- <field type="CARD8" name="client_major" />
- <field type="CARD8" name="client_minor" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="server_major" />
- <field type="CARD16" name="server_minor" />
- </reply>
- </request>
-
- <request name="QueryClients" opcode="1">
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="num_clients" />
- <pad bytes="20" />
- <list type="Client" name="clients">
- <fieldref>num_clients</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="QueryClientResources" opcode="2">
- <field type="CARD32" name="xid" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="num_types" />
- <pad bytes="20" />
- <list type="Type" name="types">
- <fieldref>num_types</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="QueryClientPixmapBytes" opcode="3">
- <field type="CARD32" name="xid" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="bytes" />
- <field type="CARD32" name="bytes_overflow" />
- </reply>
- </request>
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2006 Jeremy Kolb +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> +<xcb header="res" extension-xname="X-Resource" extension-name="Res" + major-version="1" minor-version="0"> + <import>xproto</import> + + <struct name="Client"> + <field type="CARD32" name="resource_base" /> + <field type="CARD32" name="resource_mask" /> + </struct> + + <struct name="Type"> + <field type="ATOM" name="resource_type" /> + <field type="CARD32" name="count" /> + </struct> + + <request name="QueryVersion" opcode="0"> + <field type="CARD8" name="client_major" /> + <field type="CARD8" name="client_minor" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="server_major" /> + <field type="CARD16" name="server_minor" /> + </reply> + </request> + + <request name="QueryClients" opcode="1"> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="num_clients" /> + <pad bytes="20" /> + <list type="Client" name="clients"> + <fieldref>num_clients</fieldref> + </list> + </reply> + </request> + + <request name="QueryClientResources" opcode="2"> + <field type="CARD32" name="xid" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="num_types" /> + <pad bytes="20" /> + <list type="Type" name="types"> + <fieldref>num_types</fieldref> + </list> + </reply> + </request> + + <request name="QueryClientPixmapBytes" opcode="3"> + <field type="CARD32" name="xid" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="bytes" /> + <field type="CARD32" name="bytes_overflow" /> + </reply> + </request> +</xcb> diff --git a/libxcb/xcb-proto/src/screensaver.xml b/libxcb/xcb-proto/src/screensaver.xml index 52af00427..9c7bccb08 100644 --- a/libxcb/xcb-proto/src/screensaver.xml +++ b/libxcb/xcb-proto/src/screensaver.xml @@ -1,128 +1,128 @@ -<!--
-
-Copyright (C) 2005 Vincent Torri.
-All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person ob/Sintaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-<!--
-Screen Saver Extension to the X Protocol
-Draft Standard Version 1.1
--->
-<xcb header="screensaver" extension-xname="MIT-SCREEN-SAVER" extension-name="ScreenSaver" major-version="1" minor-version="1">
-
- <!-- Types -->
-
- <import>xproto</import>
-
- <enum name="Kind">
- <item name="Blanked" />
- <item name="Internal" />
- <item name="External" />
- </enum>
-
- <enum name="Event">
- <item name="NotifyMask"><bit>0</bit></item>
- <item name="CycleMask"> <bit>1</bit></item>
- </enum>
-
- <enum name="State">
- <item name="Off" />
- <item name="On" />
- <item name="Cycle" />
- <item name="Disabled" />
- </enum>
-
- <!-- Errors -->
- <!-- Requests -->
- <request name="QueryVersion" opcode="0">
- <field type="CARD8" name="client_major_version"/>
- <field type="CARD8" name="client_minor_version"/>
- <pad bytes="2"/>
- <reply>
- <pad bytes="1"/>
- <field type="CARD16" name="server_major_version"/>
- <field type="CARD16" name="server_minor_version"/>
- <pad bytes="20"/>
- </reply>
- </request>
-
- <request name="QueryInfo" opcode="1">
- <field type="DRAWABLE" name="drawable"/>
- <reply>
- <field type="CARD8" name="state"/>
- <field type="WINDOW" name="saver_window"/>
- <field type="CARD32" name="ms_until_server"/>
- <field type="CARD32" name="ms_since_user_input"/>
- <field type="CARD32" name="event_mask" />
- <field type="BYTE" name="kind"/> <!-- enum Kind -->
- <pad bytes="7"/>
- </reply>
- </request>
-
- <request name="SelectInput" opcode="2">
- <field type="DRAWABLE" name="drawable"/>
- <field type="CARD32" name="event_mask" /> <!-- enum Event -->
- </request>
-
- <request name="SetAttributes" opcode="3">
- <field type="DRAWABLE" name="drawable"/>
- <field type="INT16" name="x"/>
- <field type="INT16" name="y"/>
- <field type="CARD16" name="width"/>
- <field type="CARD16" name="height"/>
- <field type="CARD16" name="border_width"/>
- <field type="BYTE" name="class"/> <!-- enum XCBWindowClass -->
- <field type="CARD8" name="depth"/>
- <field type="VISUALID" name="visual"/>
- <valueparam value-mask-type="CARD32"
- value-mask-name="value_mask"
- value-list-name="value_list" />
- </request>
-
- <request name="UnsetAttributes" opcode="4">
- <field type="DRAWABLE" name="drawable"/>
- </request>
-
- <!-- version 1.1 -->
- <request name="Suspend" opcode="5">
- <field type="BOOL" name="suspend" />
- <pad bytes="3" />
- </request>
-
- <!-- Events -->
-
- <event name="Notify" number="0">
- <field type="CARD8" name="code"/>
- <field type="BYTE" name="state"/> <!-- enum State -->
- <pad bytes="1" />
- <field type="CARD16" name="sequence_number"/>
- <field type="TIMESTAMP" name="time"/>
- <field type="WINDOW" name="root"/>
- <field type="WINDOW" name="window"/>
- <field type="BYTE" name="kind"/> <!-- enum Kind -->
- <field type="BOOL" name="forced"/>
- <pad bytes="14"/>
- </event>
-
-</xcb>
+<!-- + +Copyright (C) 2005 Vincent Torri. +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person ob/Sintaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> +<!-- +Screen Saver Extension to the X Protocol +Draft Standard Version 1.1 +--> +<xcb header="screensaver" extension-xname="MIT-SCREEN-SAVER" extension-name="ScreenSaver" major-version="1" minor-version="1"> + + <!-- Types --> + + <import>xproto</import> + + <enum name="Kind"> + <item name="Blanked" /> + <item name="Internal" /> + <item name="External" /> + </enum> + + <enum name="Event"> + <item name="NotifyMask"><bit>0</bit></item> + <item name="CycleMask"> <bit>1</bit></item> + </enum> + + <enum name="State"> + <item name="Off" /> + <item name="On" /> + <item name="Cycle" /> + <item name="Disabled" /> + </enum> + + <!-- Errors --> + <!-- Requests --> + <request name="QueryVersion" opcode="0"> + <field type="CARD8" name="client_major_version"/> + <field type="CARD8" name="client_minor_version"/> + <pad bytes="2"/> + <reply> + <pad bytes="1"/> + <field type="CARD16" name="server_major_version"/> + <field type="CARD16" name="server_minor_version"/> + <pad bytes="20"/> + </reply> + </request> + + <request name="QueryInfo" opcode="1"> + <field type="DRAWABLE" name="drawable"/> + <reply> + <field type="CARD8" name="state"/> + <field type="WINDOW" name="saver_window"/> + <field type="CARD32" name="ms_until_server"/> + <field type="CARD32" name="ms_since_user_input"/> + <field type="CARD32" name="event_mask" /> + <field type="BYTE" name="kind"/> <!-- enum Kind --> + <pad bytes="7"/> + </reply> + </request> + + <request name="SelectInput" opcode="2"> + <field type="DRAWABLE" name="drawable"/> + <field type="CARD32" name="event_mask" /> <!-- enum Event --> + </request> + + <request name="SetAttributes" opcode="3"> + <field type="DRAWABLE" name="drawable"/> + <field type="INT16" name="x"/> + <field type="INT16" name="y"/> + <field type="CARD16" name="width"/> + <field type="CARD16" name="height"/> + <field type="CARD16" name="border_width"/> + <field type="BYTE" name="class"/> <!-- enum XCBWindowClass --> + <field type="CARD8" name="depth"/> + <field type="VISUALID" name="visual"/> + <valueparam value-mask-type="CARD32" + value-mask-name="value_mask" + value-list-name="value_list" /> + </request> + + <request name="UnsetAttributes" opcode="4"> + <field type="DRAWABLE" name="drawable"/> + </request> + + <!-- version 1.1 --> + <request name="Suspend" opcode="5"> + <field type="BOOL" name="suspend" /> + <pad bytes="3" /> + </request> + + <!-- Events --> + + <event name="Notify" number="0"> + <field type="CARD8" name="code"/> + <field type="BYTE" name="state"/> <!-- enum State --> + <pad bytes="1" /> + <field type="CARD16" name="sequence_number"/> + <field type="TIMESTAMP" name="time"/> + <field type="WINDOW" name="root"/> + <field type="WINDOW" name="window"/> + <field type="BYTE" name="kind"/> <!-- enum Kind --> + <field type="BOOL" name="forced"/> + <pad bytes="14"/> + </event> + +</xcb> diff --git a/libxcb/xcb-proto/src/shape.xml b/libxcb/xcb-proto/src/shape.xml index ce54d3112..c128ade32 100644 --- a/libxcb/xcb-proto/src/shape.xml +++ b/libxcb/xcb-proto/src/shape.xml @@ -1,155 +1,155 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2001-2004 Bart Massey, Jamey Sharp, and Josh Triplett.
-All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-<!-- This file describes version 1.1 of the Shape extension. -->
-<xcb header="shape" extension-xname="SHAPE" extension-name="Shape" major-version="1" minor-version="1">
- <import>xproto</import>
-
- <typedef oldname="CARD8" newname="OP" />
- <typedef oldname="CARD8" newname="KIND" />
-
- <!-- Shape attributes of type OP. -->
- <enum name="SO">
- <item name="Set" />
- <item name="Union" />
- <item name="Intersect" />
- <item name="Subtract" />
- <item name="Invert" />
- </enum>
-
- <!-- Shape attributes of type KIND. -->
- <enum name="SK">
- <item name="Bounding" />
- <item name="Clip" />
- <item name="Input" /> <!-- added in version 1.1 -->
- </enum>
-
- <event name="Notify" number="0">
- <field type="KIND" name="shape_kind" enum="SK" />
- <field type="WINDOW" name="affected_window" />
- <field type="INT16" name="extents_x" />
- <field type="INT16" name="extents_y" />
- <field type="CARD16" name="extents_width" />
- <field type="CARD16" name="extents_height" />
- <field type="TIMESTAMP" name="server_time" />
- <field type="BOOL" name="shaped" />
- <pad bytes="11" />
- </event>
-
- <request name="QueryVersion" opcode="0">
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="major_version" />
- <field type="CARD16" name="minor_version" />
- </reply>
- </request>
-
- <request name="Rectangles" opcode="1">
- <field type="OP" name="operation" enum="SO" />
- <field type="KIND" name="destination_kind" enum="SK" />
- <field type="BYTE" name="ordering" enum="ClipOrdering" />
- <pad bytes="1" />
- <field type="WINDOW" name="destination_window" />
- <field type="INT16" name="x_offset" />
- <field type="INT16" name="y_offset" />
- <list type="RECTANGLE" name="rectangles" />
- </request>
-
- <request name="Mask" opcode="2">
- <field type="OP" name="operation" enum="SO" />
- <field type="KIND" name="destination_kind" enum="SK" />
- <pad bytes="2" />
- <field type="WINDOW" name="destination_window" />
- <field type="INT16" name="x_offset" />
- <field type="INT16" name="y_offset" />
- <field type="PIXMAP" name="source_bitmap" altenum="Pixmap" />
- </request>
-
- <request name="Combine" opcode="3">
- <field type="OP" name="operation" enum="SO" />
- <field type="KIND" name="destination_kind" enum="SK" />
- <field type="KIND" name="source_kind" enum="SK" />
- <pad bytes="1" />
- <field type="WINDOW" name="destination_window" />
- <field type="INT16" name="x_offset" />
- <field type="INT16" name="y_offset" />
- <field type="WINDOW" name="source_window" />
- </request>
-
- <request name="Offset" opcode="4">
- <field type="KIND" name="destination_kind" enum="SK" />
- <pad bytes="3" />
- <field type="WINDOW" name="destination_window" />
- <field type="INT16" name="x_offset" />
- <field type="INT16" name="y_offset" />
- </request>
-
- <request name="QueryExtents" opcode="5">
- <field type="WINDOW" name="destination_window" />
- <reply>
- <pad bytes="1" />
- <field type="BOOL" name="bounding_shaped" />
- <field type="BOOL" name="clip_shaped" />
- <pad bytes="2" />
- <field type="INT16" name="bounding_shape_extents_x" />
- <field type="INT16" name="bounding_shape_extents_y" />
- <field type="CARD16" name="bounding_shape_extents_width" />
- <field type="CARD16" name="bounding_shape_extents_height" />
- <field type="INT16" name="clip_shape_extents_x" />
- <field type="INT16" name="clip_shape_extents_y" />
- <field type="CARD16" name="clip_shape_extents_width" />
- <field type="CARD16" name="clip_shape_extents_height" />
- </reply>
- </request>
-
- <request name="SelectInput" opcode="6">
- <field type="WINDOW" name="destination_window" />
- <field type="BOOL" name="enable" />
- <pad bytes="3" />
- </request>
-
- <request name="InputSelected" opcode="7">
- <field type="WINDOW" name="destination_window" />
- <reply>
- <field type="BOOL" name="enabled" />
- </reply>
- </request>
-
- <request name="GetRectangles" opcode="8">
- <field type="WINDOW" name="window" />
- <field type="KIND" name="source_kind" enum="SK" />
- <pad bytes="3" />
- <reply>
- <field type="BYTE" name="ordering" enum="ClipOrdering" />
- <field type="CARD32" name="rectangles_len" />
- <pad bytes="20" />
- <list type="RECTANGLE" name="rectangles">
- <fieldref>rectangles_len</fieldref>
- </list>
- </reply>
- </request>
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2001-2004 Bart Massey, Jamey Sharp, and Josh Triplett. +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> +<!-- This file describes version 1.1 of the Shape extension. --> +<xcb header="shape" extension-xname="SHAPE" extension-name="Shape" major-version="1" minor-version="1"> + <import>xproto</import> + + <typedef oldname="CARD8" newname="OP" /> + <typedef oldname="CARD8" newname="KIND" /> + + <!-- Shape attributes of type OP. --> + <enum name="SO"> + <item name="Set" /> + <item name="Union" /> + <item name="Intersect" /> + <item name="Subtract" /> + <item name="Invert" /> + </enum> + + <!-- Shape attributes of type KIND. --> + <enum name="SK"> + <item name="Bounding" /> + <item name="Clip" /> + <item name="Input" /> <!-- added in version 1.1 --> + </enum> + + <event name="Notify" number="0"> + <field type="KIND" name="shape_kind" enum="SK" /> + <field type="WINDOW" name="affected_window" /> + <field type="INT16" name="extents_x" /> + <field type="INT16" name="extents_y" /> + <field type="CARD16" name="extents_width" /> + <field type="CARD16" name="extents_height" /> + <field type="TIMESTAMP" name="server_time" /> + <field type="BOOL" name="shaped" /> + <pad bytes="11" /> + </event> + + <request name="QueryVersion" opcode="0"> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="major_version" /> + <field type="CARD16" name="minor_version" /> + </reply> + </request> + + <request name="Rectangles" opcode="1"> + <field type="OP" name="operation" enum="SO" /> + <field type="KIND" name="destination_kind" enum="SK" /> + <field type="BYTE" name="ordering" enum="ClipOrdering" /> + <pad bytes="1" /> + <field type="WINDOW" name="destination_window" /> + <field type="INT16" name="x_offset" /> + <field type="INT16" name="y_offset" /> + <list type="RECTANGLE" name="rectangles" /> + </request> + + <request name="Mask" opcode="2"> + <field type="OP" name="operation" enum="SO" /> + <field type="KIND" name="destination_kind" enum="SK" /> + <pad bytes="2" /> + <field type="WINDOW" name="destination_window" /> + <field type="INT16" name="x_offset" /> + <field type="INT16" name="y_offset" /> + <field type="PIXMAP" name="source_bitmap" altenum="Pixmap" /> + </request> + + <request name="Combine" opcode="3"> + <field type="OP" name="operation" enum="SO" /> + <field type="KIND" name="destination_kind" enum="SK" /> + <field type="KIND" name="source_kind" enum="SK" /> + <pad bytes="1" /> + <field type="WINDOW" name="destination_window" /> + <field type="INT16" name="x_offset" /> + <field type="INT16" name="y_offset" /> + <field type="WINDOW" name="source_window" /> + </request> + + <request name="Offset" opcode="4"> + <field type="KIND" name="destination_kind" enum="SK" /> + <pad bytes="3" /> + <field type="WINDOW" name="destination_window" /> + <field type="INT16" name="x_offset" /> + <field type="INT16" name="y_offset" /> + </request> + + <request name="QueryExtents" opcode="5"> + <field type="WINDOW" name="destination_window" /> + <reply> + <pad bytes="1" /> + <field type="BOOL" name="bounding_shaped" /> + <field type="BOOL" name="clip_shaped" /> + <pad bytes="2" /> + <field type="INT16" name="bounding_shape_extents_x" /> + <field type="INT16" name="bounding_shape_extents_y" /> + <field type="CARD16" name="bounding_shape_extents_width" /> + <field type="CARD16" name="bounding_shape_extents_height" /> + <field type="INT16" name="clip_shape_extents_x" /> + <field type="INT16" name="clip_shape_extents_y" /> + <field type="CARD16" name="clip_shape_extents_width" /> + <field type="CARD16" name="clip_shape_extents_height" /> + </reply> + </request> + + <request name="SelectInput" opcode="6"> + <field type="WINDOW" name="destination_window" /> + <field type="BOOL" name="enable" /> + <pad bytes="3" /> + </request> + + <request name="InputSelected" opcode="7"> + <field type="WINDOW" name="destination_window" /> + <reply> + <field type="BOOL" name="enabled" /> + </reply> + </request> + + <request name="GetRectangles" opcode="8"> + <field type="WINDOW" name="window" /> + <field type="KIND" name="source_kind" enum="SK" /> + <pad bytes="3" /> + <reply> + <field type="BYTE" name="ordering" enum="ClipOrdering" /> + <field type="CARD32" name="rectangles_len" /> + <pad bytes="20" /> + <list type="RECTANGLE" name="rectangles"> + <fieldref>rectangles_len</fieldref> + </list> + </reply> + </request> +</xcb> diff --git a/libxcb/xcb-proto/src/shm.xml b/libxcb/xcb-proto/src/shm.xml index e2f575f10..adda50957 100644 --- a/libxcb/xcb-proto/src/shm.xml +++ b/libxcb/xcb-proto/src/shm.xml @@ -1,116 +1,116 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2001-2004 Bart Massey, Jamey Sharp, and Josh Triplett.
-All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-<xcb header="shm" extension-xname="MIT-SHM" extension-name="Shm"
- major-version="1" minor-version="1">
- <import>xproto</import>
-
- <xidtype name="SEG" />
-
- <event name="Completion" number="0">
- <pad bytes="1" />
- <field type="DRAWABLE" name="drawable" />
- <field type="CARD16" name="minor_event" />
- <field type="BYTE" name="major_event" />
- <pad bytes="1" />
- <field type="SEG" name="shmseg" />
- <field type="CARD32" name="offset" />
- </event>
-
- <errorcopy name="BadSeg" number="0" ref="Value" />
-
- <request name="QueryVersion" opcode="0">
- <reply>
- <field type="BOOL" name="shared_pixmaps" />
- <field type="CARD16" name="major_version" />
- <field type="CARD16" name="minor_version" />
- <field type="CARD16" name="uid" />
- <field type="CARD16" name="gid" />
- <field type="CARD8" name="pixmap_format" />
- <pad bytes="15" />
- </reply>
- </request>
-
- <request name="Attach" opcode="1">
- <field type="SEG" name="shmseg" />
- <field type="CARD32" name="shmid" />
- <field type="BOOL" name="read_only" />
- <pad bytes="3" />
- </request>
-
- <request name="Detach" opcode="2">
- <field type="SEG" name="shmseg" />
- </request>
-
- <request name="PutImage" opcode="3">
- <field type="DRAWABLE" name="drawable" />
- <field type="GCONTEXT" name="gc" />
- <field type="CARD16" name="total_width" />
- <field type="CARD16" name="total_height" />
- <field type="CARD16" name="src_x" />
- <field type="CARD16" name="src_y" />
- <field type="CARD16" name="src_width" />
- <field type="CARD16" name="src_height" />
- <field type="INT16" name="dst_x" />
- <field type="INT16" name="dst_y" />
- <field type="CARD8" name="depth" />
- <field type="CARD8" name="format" />
- <field type="CARD8" name="send_event" />
- <pad bytes="1" />
- <field type="SEG" name="shmseg" />
- <field type="CARD32" name="offset" />
- </request>
-
- <request name="GetImage" opcode="4">
- <field type="DRAWABLE" name="drawable" />
- <field type="INT16" name="x" />
- <field type="INT16" name="y" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- <field type="CARD32" name="plane_mask" />
- <field type="CARD8" name="format" />
- <pad bytes="3" />
- <field type="SEG" name="shmseg" />
- <field type="CARD32" name="offset" />
- <reply>
- <field type="CARD8" name="depth" />
- <field type="VISUALID" name="visual" />
- <field type="CARD32" name="size" />
- </reply>
- </request>
-
- <request name="CreatePixmap" opcode="5">
- <field type="PIXMAP" name="pid" />
- <field type="DRAWABLE" name="drawable" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- <field type="CARD8" name="depth" />
- <pad bytes="3" />
- <field type="SEG" name="shmseg" />
- <field type="CARD32" name="offset" />
- </request>
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2001-2004 Bart Massey, Jamey Sharp, and Josh Triplett. +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> +<xcb header="shm" extension-xname="MIT-SHM" extension-name="Shm" + major-version="1" minor-version="1"> + <import>xproto</import> + + <xidtype name="SEG" /> + + <event name="Completion" number="0"> + <pad bytes="1" /> + <field type="DRAWABLE" name="drawable" /> + <field type="CARD16" name="minor_event" /> + <field type="BYTE" name="major_event" /> + <pad bytes="1" /> + <field type="SEG" name="shmseg" /> + <field type="CARD32" name="offset" /> + </event> + + <errorcopy name="BadSeg" number="0" ref="Value" /> + + <request name="QueryVersion" opcode="0"> + <reply> + <field type="BOOL" name="shared_pixmaps" /> + <field type="CARD16" name="major_version" /> + <field type="CARD16" name="minor_version" /> + <field type="CARD16" name="uid" /> + <field type="CARD16" name="gid" /> + <field type="CARD8" name="pixmap_format" /> + <pad bytes="15" /> + </reply> + </request> + + <request name="Attach" opcode="1"> + <field type="SEG" name="shmseg" /> + <field type="CARD32" name="shmid" /> + <field type="BOOL" name="read_only" /> + <pad bytes="3" /> + </request> + + <request name="Detach" opcode="2"> + <field type="SEG" name="shmseg" /> + </request> + + <request name="PutImage" opcode="3"> + <field type="DRAWABLE" name="drawable" /> + <field type="GCONTEXT" name="gc" /> + <field type="CARD16" name="total_width" /> + <field type="CARD16" name="total_height" /> + <field type="CARD16" name="src_x" /> + <field type="CARD16" name="src_y" /> + <field type="CARD16" name="src_width" /> + <field type="CARD16" name="src_height" /> + <field type="INT16" name="dst_x" /> + <field type="INT16" name="dst_y" /> + <field type="CARD8" name="depth" /> + <field type="CARD8" name="format" /> + <field type="CARD8" name="send_event" /> + <pad bytes="1" /> + <field type="SEG" name="shmseg" /> + <field type="CARD32" name="offset" /> + </request> + + <request name="GetImage" opcode="4"> + <field type="DRAWABLE" name="drawable" /> + <field type="INT16" name="x" /> + <field type="INT16" name="y" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + <field type="CARD32" name="plane_mask" /> + <field type="CARD8" name="format" /> + <pad bytes="3" /> + <field type="SEG" name="shmseg" /> + <field type="CARD32" name="offset" /> + <reply> + <field type="CARD8" name="depth" /> + <field type="VISUALID" name="visual" /> + <field type="CARD32" name="size" /> + </reply> + </request> + + <request name="CreatePixmap" opcode="5"> + <field type="PIXMAP" name="pid" /> + <field type="DRAWABLE" name="drawable" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + <field type="CARD8" name="depth" /> + <pad bytes="3" /> + <field type="SEG" name="shmseg" /> + <field type="CARD32" name="offset" /> + </request> +</xcb> diff --git a/libxcb/xcb-proto/src/xc_misc.xml b/libxcb/xcb-proto/src/xc_misc.xml index b9b21ca48..139ca22f0 100644 --- a/libxcb/xcb-proto/src/xc_misc.xml +++ b/libxcb/xcb-proto/src/xc_misc.xml @@ -1,38 +1,38 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2004 Mikko Torni and Josh Triplett.
-All Rights Reserved. See the file COPYING in this directory
-for licensing information.
--->
-<xcb header="xc_misc" extension-xname="XC-MISC" extension-name="XCMisc"
- extension-multiword="true" major-version="1" minor-version="1">
- <request name="GetVersion" opcode="0">
- <field type="CARD16" name="client_major_version" />
- <field type="CARD16" name="client_minor_version" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="server_major_version" />
- <field type="CARD16" name="server_minor_version" />
- </reply>
- </request>
-
- <request name="GetXIDRange" opcode="1">
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="start_id" />
- <field type="CARD32" name="count" />
- </reply>
- </request>
-
- <request name="GetXIDList" opcode="2">
- <field type="CARD32" name="count" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="ids_len" />
- <pad bytes="20" />
- <list type="CARD32" name="ids">
- <fieldref>ids_len</fieldref>
- </list>
- </reply>
- </request>
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2004 Mikko Torni and Josh Triplett. +All Rights Reserved. See the file COPYING in this directory +for licensing information. +--> +<xcb header="xc_misc" extension-xname="XC-MISC" extension-name="XCMisc" + extension-multiword="true" major-version="1" minor-version="1"> + <request name="GetVersion" opcode="0"> + <field type="CARD16" name="client_major_version" /> + <field type="CARD16" name="client_minor_version" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="server_major_version" /> + <field type="CARD16" name="server_minor_version" /> + </reply> + </request> + + <request name="GetXIDRange" opcode="1"> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="start_id" /> + <field type="CARD32" name="count" /> + </reply> + </request> + + <request name="GetXIDList" opcode="2"> + <field type="CARD32" name="count" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="ids_len" /> + <pad bytes="20" /> + <list type="CARD32" name="ids"> + <fieldref>ids_len</fieldref> + </list> + </reply> + </request> +</xcb> diff --git a/libxcb/xcb-proto/src/xevie.xml b/libxcb/xcb-proto/src/xevie.xml index a88f1590b..222b412e4 100644 --- a/libxcb/xcb-proto/src/xevie.xml +++ b/libxcb/xcb-proto/src/xevie.xml @@ -1,85 +1,85 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2004 Josh Triplett. All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-<!-- This file describes version 1 of XEVIE. -->
-<xcb header="xevie" extension-xname="XEVIE" extension-name="Xevie"
- major-version="1" minor-version="0">
- <request name="QueryVersion" opcode="0">
- <field type="CARD16" name="client_major_version" />
- <field type="CARD16" name="client_minor_version" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="server_major_version" />
- <field type="CARD16" name="server_minor_version" />
- <pad bytes="20" />
- </reply>
- </request>
-
- <request name="Start" opcode="1">
- <field type="CARD32" name="screen" />
- <reply>
- <pad bytes="1" />
- <pad bytes="24" />
- </reply>
- </request>
-
- <request name="End" opcode="2">
- <field type="CARD32" name="cmap" />
- <reply>
- <pad bytes="1" />
- <pad bytes="24" />
- </reply>
- </request>
-
- <enum name="Datatype">
- <item name="Unmodified" />
- <item name="Modified" />
- </enum>
-
- <!-- The Send request needs to send an arbitrary Event; this type is used
- to reserve the necessary structure size. -->
- <struct name="Event">
- <pad bytes="32" />
- </struct>
-
- <request name="Send" opcode="3">
- <field type="Event" name="event" />
- <field type="CARD32" name="data_type" /> <!-- Datatype -->
- <pad bytes="64" />
- <reply>
- <pad bytes="1" />
- <pad bytes="24" />
- </reply>
- </request>
-
- <request name="SelectInput" opcode="4">
- <field type="CARD32" name="event_mask" />
- <reply>
- <pad bytes="1" />
- <pad bytes="24" />
- </reply>
- </request>
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2004 Josh Triplett. All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> +<!-- This file describes version 1 of XEVIE. --> +<xcb header="xevie" extension-xname="XEVIE" extension-name="Xevie" + major-version="1" minor-version="0"> + <request name="QueryVersion" opcode="0"> + <field type="CARD16" name="client_major_version" /> + <field type="CARD16" name="client_minor_version" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="server_major_version" /> + <field type="CARD16" name="server_minor_version" /> + <pad bytes="20" /> + </reply> + </request> + + <request name="Start" opcode="1"> + <field type="CARD32" name="screen" /> + <reply> + <pad bytes="1" /> + <pad bytes="24" /> + </reply> + </request> + + <request name="End" opcode="2"> + <field type="CARD32" name="cmap" /> + <reply> + <pad bytes="1" /> + <pad bytes="24" /> + </reply> + </request> + + <enum name="Datatype"> + <item name="Unmodified" /> + <item name="Modified" /> + </enum> + + <!-- The Send request needs to send an arbitrary Event; this type is used + to reserve the necessary structure size. --> + <struct name="Event"> + <pad bytes="32" /> + </struct> + + <request name="Send" opcode="3"> + <field type="Event" name="event" /> + <field type="CARD32" name="data_type" /> <!-- Datatype --> + <pad bytes="64" /> + <reply> + <pad bytes="1" /> + <pad bytes="24" /> + </reply> + </request> + + <request name="SelectInput" opcode="4"> + <field type="CARD32" name="event_mask" /> + <reply> + <pad bytes="1" /> + <pad bytes="24" /> + </reply> + </request> +</xcb> diff --git a/libxcb/xcb-proto/src/xf86dri.xml b/libxcb/xcb-proto/src/xf86dri.xml index 003728dd8..5bfc5727a 100644 --- a/libxcb/xcb-proto/src/xf86dri.xml +++ b/libxcb/xcb-proto/src/xf86dri.xml @@ -1,172 +1,172 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2005 Jeremy Kolb.
-All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person ob/Sintaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-
-<xcb header="xf86dri" extension-xname="XFree86-DRI" extension-name="XF86Dri"
- major-version="4" minor-version="1">
-
- <!-- Using http://dri.sourceforge.net/doc/dri_extensions_low_level.txt -->
-
- <!-- Types -->
-
- <struct name="DrmClipRect">
- <field type="INT16" name="x1" />
- <field type="INT16" name="y1" />
- <field type="INT16" name="x2" />
- <field type="INT16" name="x3" />
- </struct>
-
- <!-- Requests -->
- <request name="QueryVersion" opcode="0">
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="dri_major_version" />
- <field type="CARD16" name="dri_minor_version" />
- <field type="CARD32" name="dri_minor_patch" />
- </reply>
- </request>
-
- <request name="QueryDirectRenderingCapable" opcode="1">
- <field type="CARD32" name="screen" />
- <reply>
- <pad bytes="1" />
- <field type="BOOL" name="is_capable" />
- </reply>
- </request>
-
- <request name="OpenConnection" opcode="2">
- <field type="CARD32" name="screen" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="sarea_handle_low" />
- <field type="CARD32" name="sarea_handle_high" />
- <field type="CARD32" name="bus_id_len" />
- <pad bytes="12" />
- <list type="char" name="bus_id">
- <fieldref>bus_id_len</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="CloseConnection" opcode="3">
- <field type="CARD32" name="screen" />
- </request>
-
- <request name="GetClientDriverName" opcode="4">
- <field type="CARD32" name="screen" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="client_driver_major_version" />
- <field type="CARD32" name="client_driver_minor_version" />
- <field type="CARD32" name="client_driver_patch_version" />
- <field type="CARD32" name="client_driver_name_len" />
- <pad bytes="8" />
- <list type="char" name="client_driver_name">
- <fieldref>client_driver_name_len</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="CreateContext" opcode="5">
- <field type="CARD32" name="screen" />
- <field type="CARD32" name="visual" />
- <field type="CARD32" name="context" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="hw_context" />
- </reply>
- </request>
-
- <request name="DestroyContext" opcode="6">
- <field type="CARD32" name="screen" />
- <field type="CARD32" name="context" />
- </request>
-
- <request name="CreateDrawable" opcode="7">
- <field type="CARD32" name="screen" />
- <field type="CARD32" name="drawable" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="hw_drawable_handle" />
- </reply>
- </request>
-
- <request name="DestroyDrawable" opcode="8">
- <field type="CARD32" name="screen" />
- <field type="CARD32" name="drawable" />
- </request>
-
- <request name="GetDrawableInfo" opcode="9">
- <field type="CARD32" name="screen" />
- <field type="CARD32" name="drawable" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="drawable_table_index" />
- <field type="CARD32" name="drawable_table_stamp" />
- <field type="INT16" name="drawable_origin_X" />
- <field type="INT16" name="drawable_origin_Y" />
- <field type="INT16" name="drawable_size_W" />
- <field type="INT16" name="drawable_size_H" />
- <field type="CARD32" name="num_clip_rects" />
- <field type="INT16" name="back_x" />
- <field type="INT16" name="back_y" />
- <field type="CARD32" name="num_back_clip_rects" />
- <list type="DrmClipRect" name="clip_rects">
- <fieldref>num_clip_rects</fieldref>
- </list>
- <list type="DrmClipRect" name="back_clip_rects">
- <fieldref>num_back_clip_rects</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="GetDeviceInfo" opcode="10">
- <field type="CARD32" name="screen" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="framebuffer_handle_low" />
- <field type="CARD32" name="framebuffer_handle_high" />
- <field type="CARD32" name="framebuffer_origin_offset" />
- <field type="CARD32" name="framebuffer_size" />
- <field type="CARD32" name="framebuffer_stride" />
- <field type="CARD32" name="device_private_size" />
- <list type="CARD32" name="device_private">
- <fieldref>device_private_size</fieldref>
- </list>
- </reply>
- </request>
-
- <!-- Not in this doc, but specified in Mesa/src/glx/x11/xf86dri.h -->
- <request name="AuthConnection" opcode="11">
- <field type="CARD32" name="screen" />
- <field type="CARD32" name="magic" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="authenticated" />
- </reply>
- </request>
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2005 Jeremy Kolb. +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person ob/Sintaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> + +<xcb header="xf86dri" extension-xname="XFree86-DRI" extension-name="XF86Dri" + major-version="4" minor-version="1"> + + <!-- Using http://dri.sourceforge.net/doc/dri_extensions_low_level.txt --> + + <!-- Types --> + + <struct name="DrmClipRect"> + <field type="INT16" name="x1" /> + <field type="INT16" name="y1" /> + <field type="INT16" name="x2" /> + <field type="INT16" name="x3" /> + </struct> + + <!-- Requests --> + <request name="QueryVersion" opcode="0"> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="dri_major_version" /> + <field type="CARD16" name="dri_minor_version" /> + <field type="CARD32" name="dri_minor_patch" /> + </reply> + </request> + + <request name="QueryDirectRenderingCapable" opcode="1"> + <field type="CARD32" name="screen" /> + <reply> + <pad bytes="1" /> + <field type="BOOL" name="is_capable" /> + </reply> + </request> + + <request name="OpenConnection" opcode="2"> + <field type="CARD32" name="screen" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="sarea_handle_low" /> + <field type="CARD32" name="sarea_handle_high" /> + <field type="CARD32" name="bus_id_len" /> + <pad bytes="12" /> + <list type="char" name="bus_id"> + <fieldref>bus_id_len</fieldref> + </list> + </reply> + </request> + + <request name="CloseConnection" opcode="3"> + <field type="CARD32" name="screen" /> + </request> + + <request name="GetClientDriverName" opcode="4"> + <field type="CARD32" name="screen" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="client_driver_major_version" /> + <field type="CARD32" name="client_driver_minor_version" /> + <field type="CARD32" name="client_driver_patch_version" /> + <field type="CARD32" name="client_driver_name_len" /> + <pad bytes="8" /> + <list type="char" name="client_driver_name"> + <fieldref>client_driver_name_len</fieldref> + </list> + </reply> + </request> + + <request name="CreateContext" opcode="5"> + <field type="CARD32" name="screen" /> + <field type="CARD32" name="visual" /> + <field type="CARD32" name="context" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="hw_context" /> + </reply> + </request> + + <request name="DestroyContext" opcode="6"> + <field type="CARD32" name="screen" /> + <field type="CARD32" name="context" /> + </request> + + <request name="CreateDrawable" opcode="7"> + <field type="CARD32" name="screen" /> + <field type="CARD32" name="drawable" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="hw_drawable_handle" /> + </reply> + </request> + + <request name="DestroyDrawable" opcode="8"> + <field type="CARD32" name="screen" /> + <field type="CARD32" name="drawable" /> + </request> + + <request name="GetDrawableInfo" opcode="9"> + <field type="CARD32" name="screen" /> + <field type="CARD32" name="drawable" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="drawable_table_index" /> + <field type="CARD32" name="drawable_table_stamp" /> + <field type="INT16" name="drawable_origin_X" /> + <field type="INT16" name="drawable_origin_Y" /> + <field type="INT16" name="drawable_size_W" /> + <field type="INT16" name="drawable_size_H" /> + <field type="CARD32" name="num_clip_rects" /> + <field type="INT16" name="back_x" /> + <field type="INT16" name="back_y" /> + <field type="CARD32" name="num_back_clip_rects" /> + <list type="DrmClipRect" name="clip_rects"> + <fieldref>num_clip_rects</fieldref> + </list> + <list type="DrmClipRect" name="back_clip_rects"> + <fieldref>num_back_clip_rects</fieldref> + </list> + </reply> + </request> + + <request name="GetDeviceInfo" opcode="10"> + <field type="CARD32" name="screen" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="framebuffer_handle_low" /> + <field type="CARD32" name="framebuffer_handle_high" /> + <field type="CARD32" name="framebuffer_origin_offset" /> + <field type="CARD32" name="framebuffer_size" /> + <field type="CARD32" name="framebuffer_stride" /> + <field type="CARD32" name="device_private_size" /> + <list type="CARD32" name="device_private"> + <fieldref>device_private_size</fieldref> + </list> + </reply> + </request> + + <!-- Not in this doc, but specified in Mesa/src/glx/x11/xf86dri.h --> + <request name="AuthConnection" opcode="11"> + <field type="CARD32" name="screen" /> + <field type="CARD32" name="magic" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="authenticated" /> + </reply> + </request> +</xcb> diff --git a/libxcb/xcb-proto/src/xf86vidmode.xml b/libxcb/xcb-proto/src/xf86vidmode.xml index 4a193f58d..9dacaef41 100644 --- a/libxcb/xcb-proto/src/xf86vidmode.xml +++ b/libxcb/xcb-proto/src/xf86vidmode.xml @@ -1,478 +1,478 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2009 Open Text Corporation. All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-
-<xcb header="xf86vidmode" extension-xname="XFree86-VidModeExtension" extension-name="XF86VidMode"
- major-version="2" minor-version="2">
-
- <!-- In places where there are multiple versions of the protocol, this
- describes version 2.2. If you do not call xcb_xf86vidmode_set_client_version()
- then some requests may fail and some replies may not be what you expect. -->
-
- <typedef oldname="CARD32" newname="SYNCRANGE" /> <!-- Min and Max fixed-decimal-point values -->
- <typedef oldname="CARD32" newname="DOTCLOCK" /> <!-- A single fixed-decimal-point value -->
-
- <enum name="ModeFlag">
- <item name="Positive_HSync"> <bit>0</bit></item>
- <item name="Negative_HSync"> <bit>1</bit></item>
- <item name="Positive_VSync"> <bit>2</bit></item>
- <item name="Negative_VSync"> <bit>3</bit></item>
- <item name="Interlace"> <bit>4</bit></item>
- <item name="Composite_Sync"> <bit>5</bit></item>
- <item name="Positive_CSync"> <bit>6</bit></item>
- <item name="Negative_CSync"> <bit>7</bit></item>
- <item name="HSkew"> <bit>8</bit></item>
- <item name="Broadcast"> <bit>9</bit></item>
- <item name="Pixmux"> <bit>10</bit></item>
- <item name="Double_Clock"> <bit>11</bit></item>
- <item name="Half_Clock"> <bit>12</bit></item>
- </enum>
-
- <enum name="ClockFlag">
- <item name="Programable"> <bit>0</bit></item>
- </enum>
-
- <enum name="Permission">
- <item name="Read"> <bit>0</bit></item>
- <item name="Write"> <bit>1</bit></item>
- </enum>
-
- <struct name="ModeInfo">
- <field type="DOTCLOCK" name="dotclock" />
- <field type="CARD16" name= "hdisplay" />
- <field type="CARD16" name= "hsyncstart" />
- <field type="CARD16" name= "hsyncend" />
- <field type="CARD16" name= "htotal" />
- <field type="CARD32" name= "hskew" />
- <field type="CARD16" name= "vdisplay" />
- <field type="CARD16" name= "vsyncstart" />
- <field type="CARD16" name= "vsyncend" />
- <field type="CARD16" name= "vtotal" />
- <pad bytes="4" />
- <field type="CARD32" name="flags" mask="ModeFlag" />
- <pad bytes="12" />
- <field type="CARD32" name="privsize" />
- </struct>
-
- <request name="QueryVersion" opcode="0">
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="major_version" />
- <field type="CARD16" name="minor_version" />
- </reply>
- </request>
-
- <request name="GetModeLine" opcode="1">
- <field type="CARD16" name="screen" />
- <pad bytes="2" />
- <reply>
- <pad bytes="1" />
- <field type="DOTCLOCK" name="dotclock" />
- <field type="CARD16" name= "hdisplay" />
- <field type="CARD16" name= "hsyncstart" />
- <field type="CARD16" name= "hsyncend" />
- <field type="CARD16" name= "htotal" />
- <field type="CARD16" name= "hskew" />
- <field type="CARD16" name= "vdisplay" />
- <field type="CARD16" name= "vsyncstart" />
- <field type="CARD16" name= "vsyncend" />
- <field type="CARD16" name= "vtotal" />
- <pad bytes="2" />
- <field type="CARD32" name="flags" mask="ModeFlag" />
- <pad bytes="12" />
- <field type="CARD32" name="privsize" />
- <list type="CARD8" name="private">
- <fieldref>privsize</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="ModModeLine" opcode="2">
- <field type="CARD32" name="screen" />
- <field type="CARD16" name= "hdisplay" />
- <field type="CARD16" name= "hsyncstart" />
- <field type="CARD16" name= "hsyncend" />
- <field type="CARD16" name= "htotal" />
- <field type="CARD16" name= "hskew" />
- <field type="CARD16" name= "vdisplay" />
- <field type="CARD16" name= "vsyncstart" />
- <field type="CARD16" name= "vsyncend" />
- <field type="CARD16" name= "vtotal" />
- <pad bytes="2" />
- <field type="CARD32" name="flags" mask="ModeFlag" />
- <pad bytes="12" />
- <field type="CARD32" name="privsize" />
- <list type="CARD8" name="private">
- <fieldref>privsize</fieldref>
- </list>
- </request>
-
- <request name="SwitchMode" opcode="3">
- <field type="CARD16" name="screen" />
- <field type="CARD16" name="zoom" />
- </request>
-
- <request name="GetMonitor" opcode="4">
- <field type="CARD16" name="screen" />
- <pad bytes="2" />
- <reply>
- <pad bytes="1" />
- <field type="CARD8" name="vendor_length" />
- <field type="CARD8" name="model_length" />
- <field type="CARD8" name="num_hsync" />
- <field type="CARD8" name="num_vsync" />
- <pad bytes="20" />
- <list type="SYNCRANGE" name="hsync">
- <fieldref>num_hsync</fieldref>
- </list>
- <list type="SYNCRANGE" name="vsync">
- <fieldref>num_vsync</fieldref>
- </list>
- <list type="char" name="vendor">
- <fieldref>vendor_length</fieldref>
- </list>
- <list type="void" name="alignment_pad">
- <op op="-">
- <op op="&">
- <op op="+">
- <fieldref>vendor_length</fieldref>
- <value> 3 </value>
- </op>
- <unop op="~">
- <value>3</value>
- </unop>
- </op>
- <fieldref>vendor_length</fieldref>
- </op>
- </list>
- <list type="char" name="model">
- <fieldref>model_length</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="LockModeSwitch" opcode="5">
- <field type="CARD16" name="screen" />
- <field type="CARD16" name="lock" />
- </request>
-
- <request name="GetAllModeLines" opcode="6">
- <field type="CARD16" name="screen" />
- <pad bytes="2" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="modecount" />
- <pad bytes="20" />
- <list type="ModeInfo" name="modeinfo">
- <fieldref>modecount</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="AddModeLine" opcode="7">
- <field type="CARD32" name="screen" />
- <field type="DOTCLOCK" name="dotclock" />
- <field type="CARD16" name= "hdisplay" />
- <field type="CARD16" name= "hsyncstart" />
- <field type="CARD16" name= "hsyncend" />
- <field type="CARD16" name= "htotal" />
- <field type="CARD16" name= "hskew" />
- <field type="CARD16" name= "vdisplay" />
- <field type="CARD16" name= "vsyncstart" />
- <field type="CARD16" name= "vsyncend" />
- <field type="CARD16" name= "vtotal" />
- <pad bytes="2" />
- <field type="CARD32" name="flags" mask="ModeFlag" />
- <pad bytes="12" />
- <field type="CARD32" name="privsize" />
- <field type="DOTCLOCK" name="after_dotclock" />
- <field type="CARD16" name= "after_hdisplay" />
- <field type="CARD16" name= "after_hsyncstart" />
- <field type="CARD16" name= "after_hsyncend" />
- <field type="CARD16" name= "after_htotal" />
- <field type="CARD16" name= "after_hskew" />
- <field type="CARD16" name= "after_vdisplay" />
- <field type="CARD16" name= "after_vsyncstart" />
- <field type="CARD16" name= "after_vsyncend" />
- <field type="CARD16" name= "after_vtotal" />
- <pad bytes="2" />
- <field type="CARD32" name="after_flags" mask="ModeFlag" />
- <pad bytes="12" />
- <list type="CARD8" name="private">
- <fieldref>privsize</fieldref>
- </list>
- </request>
-
- <request name="DeleteModeLine" opcode="8">
- <field type="CARD32" name="screen" />
- <field type="DOTCLOCK" name="dotclock" />
- <field type="CARD16" name= "hdisplay" />
- <field type="CARD16" name= "hsyncstart" />
- <field type="CARD16" name= "hsyncend" />
- <field type="CARD16" name= "htotal" />
- <field type="CARD16" name= "hskew" />
- <field type="CARD16" name= "vdisplay" />
- <field type="CARD16" name= "vsyncstart" />
- <field type="CARD16" name= "vsyncend" />
- <field type="CARD16" name= "vtotal" />
- <pad bytes="2" />
- <field type="CARD32" name="flags" mask="ModeFlag" />
- <pad bytes="12" />
- <field type="CARD32" name="privsize" />
- <list type="CARD8" name="private">
- <fieldref>privsize</fieldref>
- </list>
- </request>
-
- <request name="ValidateModeLine" opcode="9">
- <field type="CARD32" name="screen" />
- <field type="DOTCLOCK" name="dotclock" />
- <field type="CARD16" name= "hdisplay" />
- <field type="CARD16" name= "hsyncstart" />
- <field type="CARD16" name= "hsyncend" />
- <field type="CARD16" name= "htotal" />
- <field type="CARD16" name= "hskew" />
- <field type="CARD16" name= "vdisplay" />
- <field type="CARD16" name= "vsyncstart" />
- <field type="CARD16" name= "vsyncend" />
- <field type="CARD16" name= "vtotal" />
- <pad bytes="2" />
- <field type="CARD32" name="flags" mask="ModeFlag" />
- <pad bytes="12" />
- <field type="CARD32" name="privsize" />
- <list type="CARD8" name="private">
- <fieldref>privsize</fieldref>
- </list>
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="status" />
- <pad bytes="20" />
- </reply>
- </request>
-
- <request name="SwitchToMode" opcode="10">
- <field type="CARD32" name="screen" />
- <field type="DOTCLOCK" name="dotclock" />
- <field type="CARD16" name= "hdisplay" />
- <field type="CARD16" name= "hsyncstart" />
- <field type="CARD16" name= "hsyncend" />
- <field type="CARD16" name= "htotal" />
- <field type="CARD16" name= "hskew" />
- <field type="CARD16" name= "vdisplay" />
- <field type="CARD16" name= "vsyncstart" />
- <field type="CARD16" name= "vsyncend" />
- <field type="CARD16" name= "vtotal" />
- <pad bytes="2" />
- <field type="CARD32" name="flags" mask="ModeFlag" />
- <pad bytes="12" />
- <field type="CARD32" name="privsize" />
- <list type="CARD8" name="private">
- <fieldref>privsize</fieldref>
- </list>
- </request>
-
- <request name="GetViewPort" opcode="11">
- <field type="CARD16" name="screen" />
- <pad bytes="2" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="x" />
- <field type="CARD32" name="y" />
- <pad bytes="16" />
- </reply>
- </request>
-
- <request name="SetViewPort" opcode="12">
- <field type="CARD16" name="screen" />
- <pad bytes="2" />
- <field type="CARD32" name="x" />
- <field type="CARD32" name="y" />
- </request>
-
- <!-- new for version 2.x -->
- <request name="GetDotClocks" opcode="13">
- <field type="CARD16" name="screen" />
- <pad bytes="2" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="flags" mask="ClockFlag" />
- <field type="CARD32" name="clocks" />
- <field type="CARD32" name="maxclocks" />
- <pad bytes="12" />
- <list type="CARD32" name="clock">
- <!-- Only if flags does not include Programable:
- (1 - (flags & 1)) * clocks
- -->
- <op op="*">
- <op op = "-">
- <value>1</value>
- <op op="&">
- <fieldref>flags</fieldref>
- <value>1</value>
- </op>
- </op>
- <fieldref>clocks</fieldref>
- </op>
- </list>
- </reply>
- </request>
-
- <request name="SetClientVersion" opcode="14">
- <field type="CARD16" name="major" />
- <field type="CARD16" name="minor" />
- </request>
-
- <request name="SetGamma" opcode="15">
- <field type="CARD16" name="screen" />
- <pad bytes="2" />
- <field type="CARD32" name="red" />
- <field type="CARD32" name="green" />
- <field type="CARD32" name="blue" />
- <pad bytes="12" />
- </request>
-
- <request name="GetGamma" opcode="16">
- <field type="CARD16" name="screen" />
- <pad bytes="26" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="red" />
- <field type="CARD32" name="green" />
- <field type="CARD32" name="blue" />
- <pad bytes="12" />
- </reply>
- </request>
-
- <request name="GetGammaRamp" opcode="17">
- <field type="CARD16" name="screen" />
- <field type="CARD16" name="size" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="size" />
- <pad bytes="22" />
- <list type="CARD16" name="red">
- <op op="&">
- <op op = "+">
- <fieldref>size</fieldref>
- <value>1</value>
- </op>
- <unop op="~">
- <value>1</value>
- </unop>
- </op>
- </list>
- <list type="CARD16" name="green">
- <op op="&">
- <op op = "+">
- <fieldref>size</fieldref>
- <value>1</value>
- </op>
- <unop op="~">
- <value>1</value>
- </unop>
- </op>
- </list>
- <list type="CARD16" name="blue">
- <op op="&">
- <op op = "+">
- <fieldref>size</fieldref>
- <value>1</value>
- </op>
- <unop op="~">
- <value>1</value>
- </unop>
- </op>
- </list>
- </reply>
- </request>
-
- <request name="SetGammaRamp" opcode="18">
- <field type="CARD16" name="screen" />
- <field type="CARD16" name="size" />
- <list type="CARD16" name="red">
- <op op="&">
- <op op = "+">
- <fieldref>size</fieldref>
- <value>1</value>
- </op>
- <unop op="~">
- <value>1</value>
- </unop>
- </op>
- </list>
- <list type="CARD16" name="green">
- <op op="&">
- <op op = "+">
- <fieldref>size</fieldref>
- <value>1</value>
- </op>
- <unop op="~">
- <value>1</value>
- </unop>
- </op>
- </list>
- <list type="CARD16" name="blue">
- <op op="&">
- <op op = "+">
- <fieldref>size</fieldref>
- <value>1</value>
- </op>
- <unop op="~">
- <value>1</value>
- </unop>
- </op>
- </list>
- </request>
-
- <request name="GetGammaRampSize" opcode="19">
- <field type="CARD16" name="screen" />
- <pad bytes="2" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="size" />
- <pad bytes="22" />
- </reply>
- </request>
-
- <request name="GetPermissions" opcode="20">
- <field type="CARD16" name="screen" />
- <pad bytes="2" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="permissions" mask="Permission" />
- <pad bytes="20" />
- </reply>
- </request>
-
- <error name="BadClock" number="0" />
- <error name="BadHTimings" number="1" />
- <error name="BadVTimings" number="2" />
- <error name="ModeUnsuitable" number="3" />
- <error name="ExtensionDisabled" number="4" />
- <error name="ClientNotLocal" number="5" />
- <error name="ZoomLocked" number="6" />
-
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2009 Open Text Corporation. All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> + +<xcb header="xf86vidmode" extension-xname="XFree86-VidModeExtension" extension-name="XF86VidMode" + major-version="2" minor-version="2"> + + <!-- In places where there are multiple versions of the protocol, this + describes version 2.2. If you do not call xcb_xf86vidmode_set_client_version() + then some requests may fail and some replies may not be what you expect. --> + + <typedef oldname="CARD32" newname="SYNCRANGE" /> <!-- Min and Max fixed-decimal-point values --> + <typedef oldname="CARD32" newname="DOTCLOCK" /> <!-- A single fixed-decimal-point value --> + + <enum name="ModeFlag"> + <item name="Positive_HSync"> <bit>0</bit></item> + <item name="Negative_HSync"> <bit>1</bit></item> + <item name="Positive_VSync"> <bit>2</bit></item> + <item name="Negative_VSync"> <bit>3</bit></item> + <item name="Interlace"> <bit>4</bit></item> + <item name="Composite_Sync"> <bit>5</bit></item> + <item name="Positive_CSync"> <bit>6</bit></item> + <item name="Negative_CSync"> <bit>7</bit></item> + <item name="HSkew"> <bit>8</bit></item> + <item name="Broadcast"> <bit>9</bit></item> + <item name="Pixmux"> <bit>10</bit></item> + <item name="Double_Clock"> <bit>11</bit></item> + <item name="Half_Clock"> <bit>12</bit></item> + </enum> + + <enum name="ClockFlag"> + <item name="Programable"> <bit>0</bit></item> + </enum> + + <enum name="Permission"> + <item name="Read"> <bit>0</bit></item> + <item name="Write"> <bit>1</bit></item> + </enum> + + <struct name="ModeInfo"> + <field type="DOTCLOCK" name="dotclock" /> + <field type="CARD16" name= "hdisplay" /> + <field type="CARD16" name= "hsyncstart" /> + <field type="CARD16" name= "hsyncend" /> + <field type="CARD16" name= "htotal" /> + <field type="CARD32" name= "hskew" /> + <field type="CARD16" name= "vdisplay" /> + <field type="CARD16" name= "vsyncstart" /> + <field type="CARD16" name= "vsyncend" /> + <field type="CARD16" name= "vtotal" /> + <pad bytes="4" /> + <field type="CARD32" name="flags" mask="ModeFlag" /> + <pad bytes="12" /> + <field type="CARD32" name="privsize" /> + </struct> + + <request name="QueryVersion" opcode="0"> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="major_version" /> + <field type="CARD16" name="minor_version" /> + </reply> + </request> + + <request name="GetModeLine" opcode="1"> + <field type="CARD16" name="screen" /> + <pad bytes="2" /> + <reply> + <pad bytes="1" /> + <field type="DOTCLOCK" name="dotclock" /> + <field type="CARD16" name= "hdisplay" /> + <field type="CARD16" name= "hsyncstart" /> + <field type="CARD16" name= "hsyncend" /> + <field type="CARD16" name= "htotal" /> + <field type="CARD16" name= "hskew" /> + <field type="CARD16" name= "vdisplay" /> + <field type="CARD16" name= "vsyncstart" /> + <field type="CARD16" name= "vsyncend" /> + <field type="CARD16" name= "vtotal" /> + <pad bytes="2" /> + <field type="CARD32" name="flags" mask="ModeFlag" /> + <pad bytes="12" /> + <field type="CARD32" name="privsize" /> + <list type="CARD8" name="private"> + <fieldref>privsize</fieldref> + </list> + </reply> + </request> + + <request name="ModModeLine" opcode="2"> + <field type="CARD32" name="screen" /> + <field type="CARD16" name= "hdisplay" /> + <field type="CARD16" name= "hsyncstart" /> + <field type="CARD16" name= "hsyncend" /> + <field type="CARD16" name= "htotal" /> + <field type="CARD16" name= "hskew" /> + <field type="CARD16" name= "vdisplay" /> + <field type="CARD16" name= "vsyncstart" /> + <field type="CARD16" name= "vsyncend" /> + <field type="CARD16" name= "vtotal" /> + <pad bytes="2" /> + <field type="CARD32" name="flags" mask="ModeFlag" /> + <pad bytes="12" /> + <field type="CARD32" name="privsize" /> + <list type="CARD8" name="private"> + <fieldref>privsize</fieldref> + </list> + </request> + + <request name="SwitchMode" opcode="3"> + <field type="CARD16" name="screen" /> + <field type="CARD16" name="zoom" /> + </request> + + <request name="GetMonitor" opcode="4"> + <field type="CARD16" name="screen" /> + <pad bytes="2" /> + <reply> + <pad bytes="1" /> + <field type="CARD8" name="vendor_length" /> + <field type="CARD8" name="model_length" /> + <field type="CARD8" name="num_hsync" /> + <field type="CARD8" name="num_vsync" /> + <pad bytes="20" /> + <list type="SYNCRANGE" name="hsync"> + <fieldref>num_hsync</fieldref> + </list> + <list type="SYNCRANGE" name="vsync"> + <fieldref>num_vsync</fieldref> + </list> + <list type="char" name="vendor"> + <fieldref>vendor_length</fieldref> + </list> + <list type="void" name="alignment_pad"> + <op op="-"> + <op op="&"> + <op op="+"> + <fieldref>vendor_length</fieldref> + <value> 3 </value> + </op> + <unop op="~"> + <value>3</value> + </unop> + </op> + <fieldref>vendor_length</fieldref> + </op> + </list> + <list type="char" name="model"> + <fieldref>model_length</fieldref> + </list> + </reply> + </request> + + <request name="LockModeSwitch" opcode="5"> + <field type="CARD16" name="screen" /> + <field type="CARD16" name="lock" /> + </request> + + <request name="GetAllModeLines" opcode="6"> + <field type="CARD16" name="screen" /> + <pad bytes="2" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="modecount" /> + <pad bytes="20" /> + <list type="ModeInfo" name="modeinfo"> + <fieldref>modecount</fieldref> + </list> + </reply> + </request> + + <request name="AddModeLine" opcode="7"> + <field type="CARD32" name="screen" /> + <field type="DOTCLOCK" name="dotclock" /> + <field type="CARD16" name= "hdisplay" /> + <field type="CARD16" name= "hsyncstart" /> + <field type="CARD16" name= "hsyncend" /> + <field type="CARD16" name= "htotal" /> + <field type="CARD16" name= "hskew" /> + <field type="CARD16" name= "vdisplay" /> + <field type="CARD16" name= "vsyncstart" /> + <field type="CARD16" name= "vsyncend" /> + <field type="CARD16" name= "vtotal" /> + <pad bytes="2" /> + <field type="CARD32" name="flags" mask="ModeFlag" /> + <pad bytes="12" /> + <field type="CARD32" name="privsize" /> + <field type="DOTCLOCK" name="after_dotclock" /> + <field type="CARD16" name= "after_hdisplay" /> + <field type="CARD16" name= "after_hsyncstart" /> + <field type="CARD16" name= "after_hsyncend" /> + <field type="CARD16" name= "after_htotal" /> + <field type="CARD16" name= "after_hskew" /> + <field type="CARD16" name= "after_vdisplay" /> + <field type="CARD16" name= "after_vsyncstart" /> + <field type="CARD16" name= "after_vsyncend" /> + <field type="CARD16" name= "after_vtotal" /> + <pad bytes="2" /> + <field type="CARD32" name="after_flags" mask="ModeFlag" /> + <pad bytes="12" /> + <list type="CARD8" name="private"> + <fieldref>privsize</fieldref> + </list> + </request> + + <request name="DeleteModeLine" opcode="8"> + <field type="CARD32" name="screen" /> + <field type="DOTCLOCK" name="dotclock" /> + <field type="CARD16" name= "hdisplay" /> + <field type="CARD16" name= "hsyncstart" /> + <field type="CARD16" name= "hsyncend" /> + <field type="CARD16" name= "htotal" /> + <field type="CARD16" name= "hskew" /> + <field type="CARD16" name= "vdisplay" /> + <field type="CARD16" name= "vsyncstart" /> + <field type="CARD16" name= "vsyncend" /> + <field type="CARD16" name= "vtotal" /> + <pad bytes="2" /> + <field type="CARD32" name="flags" mask="ModeFlag" /> + <pad bytes="12" /> + <field type="CARD32" name="privsize" /> + <list type="CARD8" name="private"> + <fieldref>privsize</fieldref> + </list> + </request> + + <request name="ValidateModeLine" opcode="9"> + <field type="CARD32" name="screen" /> + <field type="DOTCLOCK" name="dotclock" /> + <field type="CARD16" name= "hdisplay" /> + <field type="CARD16" name= "hsyncstart" /> + <field type="CARD16" name= "hsyncend" /> + <field type="CARD16" name= "htotal" /> + <field type="CARD16" name= "hskew" /> + <field type="CARD16" name= "vdisplay" /> + <field type="CARD16" name= "vsyncstart" /> + <field type="CARD16" name= "vsyncend" /> + <field type="CARD16" name= "vtotal" /> + <pad bytes="2" /> + <field type="CARD32" name="flags" mask="ModeFlag" /> + <pad bytes="12" /> + <field type="CARD32" name="privsize" /> + <list type="CARD8" name="private"> + <fieldref>privsize</fieldref> + </list> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="status" /> + <pad bytes="20" /> + </reply> + </request> + + <request name="SwitchToMode" opcode="10"> + <field type="CARD32" name="screen" /> + <field type="DOTCLOCK" name="dotclock" /> + <field type="CARD16" name= "hdisplay" /> + <field type="CARD16" name= "hsyncstart" /> + <field type="CARD16" name= "hsyncend" /> + <field type="CARD16" name= "htotal" /> + <field type="CARD16" name= "hskew" /> + <field type="CARD16" name= "vdisplay" /> + <field type="CARD16" name= "vsyncstart" /> + <field type="CARD16" name= "vsyncend" /> + <field type="CARD16" name= "vtotal" /> + <pad bytes="2" /> + <field type="CARD32" name="flags" mask="ModeFlag" /> + <pad bytes="12" /> + <field type="CARD32" name="privsize" /> + <list type="CARD8" name="private"> + <fieldref>privsize</fieldref> + </list> + </request> + + <request name="GetViewPort" opcode="11"> + <field type="CARD16" name="screen" /> + <pad bytes="2" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="x" /> + <field type="CARD32" name="y" /> + <pad bytes="16" /> + </reply> + </request> + + <request name="SetViewPort" opcode="12"> + <field type="CARD16" name="screen" /> + <pad bytes="2" /> + <field type="CARD32" name="x" /> + <field type="CARD32" name="y" /> + </request> + + <!-- new for version 2.x --> + <request name="GetDotClocks" opcode="13"> + <field type="CARD16" name="screen" /> + <pad bytes="2" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="flags" mask="ClockFlag" /> + <field type="CARD32" name="clocks" /> + <field type="CARD32" name="maxclocks" /> + <pad bytes="12" /> + <list type="CARD32" name="clock"> + <!-- Only if flags does not include Programable: + (1 - (flags & 1)) * clocks + --> + <op op="*"> + <op op = "-"> + <value>1</value> + <op op="&"> + <fieldref>flags</fieldref> + <value>1</value> + </op> + </op> + <fieldref>clocks</fieldref> + </op> + </list> + </reply> + </request> + + <request name="SetClientVersion" opcode="14"> + <field type="CARD16" name="major" /> + <field type="CARD16" name="minor" /> + </request> + + <request name="SetGamma" opcode="15"> + <field type="CARD16" name="screen" /> + <pad bytes="2" /> + <field type="CARD32" name="red" /> + <field type="CARD32" name="green" /> + <field type="CARD32" name="blue" /> + <pad bytes="12" /> + </request> + + <request name="GetGamma" opcode="16"> + <field type="CARD16" name="screen" /> + <pad bytes="26" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="red" /> + <field type="CARD32" name="green" /> + <field type="CARD32" name="blue" /> + <pad bytes="12" /> + </reply> + </request> + + <request name="GetGammaRamp" opcode="17"> + <field type="CARD16" name="screen" /> + <field type="CARD16" name="size" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="size" /> + <pad bytes="22" /> + <list type="CARD16" name="red"> + <op op="&"> + <op op = "+"> + <fieldref>size</fieldref> + <value>1</value> + </op> + <unop op="~"> + <value>1</value> + </unop> + </op> + </list> + <list type="CARD16" name="green"> + <op op="&"> + <op op = "+"> + <fieldref>size</fieldref> + <value>1</value> + </op> + <unop op="~"> + <value>1</value> + </unop> + </op> + </list> + <list type="CARD16" name="blue"> + <op op="&"> + <op op = "+"> + <fieldref>size</fieldref> + <value>1</value> + </op> + <unop op="~"> + <value>1</value> + </unop> + </op> + </list> + </reply> + </request> + + <request name="SetGammaRamp" opcode="18"> + <field type="CARD16" name="screen" /> + <field type="CARD16" name="size" /> + <list type="CARD16" name="red"> + <op op="&"> + <op op = "+"> + <fieldref>size</fieldref> + <value>1</value> + </op> + <unop op="~"> + <value>1</value> + </unop> + </op> + </list> + <list type="CARD16" name="green"> + <op op="&"> + <op op = "+"> + <fieldref>size</fieldref> + <value>1</value> + </op> + <unop op="~"> + <value>1</value> + </unop> + </op> + </list> + <list type="CARD16" name="blue"> + <op op="&"> + <op op = "+"> + <fieldref>size</fieldref> + <value>1</value> + </op> + <unop op="~"> + <value>1</value> + </unop> + </op> + </list> + </request> + + <request name="GetGammaRampSize" opcode="19"> + <field type="CARD16" name="screen" /> + <pad bytes="2" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="size" /> + <pad bytes="22" /> + </reply> + </request> + + <request name="GetPermissions" opcode="20"> + <field type="CARD16" name="screen" /> + <pad bytes="2" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="permissions" mask="Permission" /> + <pad bytes="20" /> + </reply> + </request> + + <error name="BadClock" number="0" /> + <error name="BadHTimings" number="1" /> + <error name="BadVTimings" number="2" /> + <error name="ModeUnsuitable" number="3" /> + <error name="ExtensionDisabled" number="4" /> + <error name="ClientNotLocal" number="5" /> + <error name="ZoomLocked" number="6" /> + +</xcb> diff --git a/libxcb/xcb-proto/src/xfixes.xml b/libxcb/xcb-proto/src/xfixes.xml index 7ddea0db5..9bbeaab1e 100644 --- a/libxcb/xcb-proto/src/xfixes.xml +++ b/libxcb/xcb-proto/src/xfixes.xml @@ -1,334 +1,334 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2004 Josh Triplett. All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-<!-- This file describes version 4 of XFixes. -->
-<xcb header="xfixes" extension-xname="XFIXES" extension-name="XFixes"
- major-version="4" minor-version="0">
- <import>xproto</import>
- <import>render</import>
- <import>shape</import>
-
- <!-- Version 1 -->
- <request name="QueryVersion" opcode="0">
- <field type="CARD32" name="client_major_version" />
- <field type="CARD32" name="client_minor_version" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="major_version" />
- <field type="CARD32" name="minor_version" />
- <pad bytes="16" />
- </reply>
- </request>
-
- <enum name="SaveSetMode">
- <item name="Insert" />
- <item name="Delete" />
- </enum>
-
- <enum name="SaveSetTarget">
- <item name="Nearest" />
- <item name="Root" />
- </enum>
-
- <enum name="SaveSetMapping">
- <item name="Map" />
- <item name="Unmap" />
- </enum>
-
- <request name="ChangeSaveSet" opcode="1">
- <field type="BYTE" name="mode" enum="SaveSetMode" />
- <field type="BYTE" name="target" enum="SaveSetTarget" />
- <field type="BYTE" name="map" enum="SaveSetMapping" />
- <pad bytes="1" />
- <field type="WINDOW" name="window" />
- </request>
-
- <enum name="SelectionEvent">
- <item name="SetSelectionOwner" />
- <item name="SelectionWindowDestroy" />
- <item name="SelectionClientClose" />
- </enum>
-
- <enum name="SelectionEventMask">
- <item name="SetSelectionOwner"> <bit>0</bit></item>
- <item name="SelectionWindowDestroy"><bit>1</bit></item>
- <item name="SelectionClientClose"> <bit>2</bit></item>
- </enum>
-
- <event name="SelectionNotify" number="0">
- <field type="CARD8" name="subtype" enum="SelectionEvent" />
- <field type="WINDOW" name="window" />
- <field type="WINDOW" name="owner" />
- <field type="ATOM" name="selection" />
- <field type="TIMESTAMP" name="timestamp" />
- <field type="TIMESTAMP" name="selection_timestamp" />
- <pad bytes="8" />
- </event>
-
- <request name="SelectSelectionInput" opcode="2">
- <field type="WINDOW" name="window" />
- <field type="ATOM" name="selection" />
- <field type="CARD32" name="event_mask" mask="SelectionEventMask" />
- </request>
-
- <enum name="CursorNotify">
- <item name="DisplayCursor" />
- </enum>
-
- <enum name="CursorNotifyMask">
- <item name="DisplayCursor"><bit>0</bit></item>
- </enum>
-
- <event name="CursorNotify" number="1">
- <field type="CARD8" name="subtype" enum="CursorNotify" />
- <field type="WINDOW" name="window" />
- <field type="CARD32" name="cursor_serial" />
- <field type="TIMESTAMP" name="timestamp" />
- <field type="ATOM" name="name" altenum="Atom" /> <!-- Added in version 2 -->
- <pad bytes="12" />
- </event>
-
- <request name="SelectCursorInput" opcode="3">
- <field type="WINDOW" name="window" />
- <field type="CARD32" name="event_mask" mask="CursorNotifyMask" />
- </request>
-
- <request name="GetCursorImage" opcode="4">
- <reply>
- <pad bytes="1" />
- <field type="INT16" name="x" />
- <field type="INT16" name="y" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- <field type="CARD16" name="xhot" />
- <field type="CARD16" name="yhot" />
- <field type="CARD32" name="cursor_serial" />
- <pad bytes="8" />
- <list type="CARD32" name="cursor_image">
- <op op="*">
- <fieldref>width</fieldref>
- <fieldref>height</fieldref>
- </op>
- </list>
- </reply>
- </request>
-
- <!-- Version 2 -->
-
- <xidtype name="REGION" />
-
- <error name="BadRegion" number="0" />
-
- <enum name="Region">
- <item name="None" />
- </enum>
-
- <request name="CreateRegion" opcode="5">
- <field type="REGION" name="region" />
- <list type="RECTANGLE" name="rectangles" />
- </request>
-
- <request name="CreateRegionFromBitmap" opcode="6">
- <field type="REGION" name="region" />
- <field type="PIXMAP" name="bitmap" />
- </request>
-
- <request name="CreateRegionFromWindow" opcode="7">
- <field type="REGION" name="region" />
- <field type="WINDOW" name="window" />
- <field type="shape:KIND" name="kind" enum="SK" />
- <pad bytes="3" />
- </request>
-
- <request name="CreateRegionFromGC" opcode="8">
- <field type="REGION" name="region" />
- <field type="GCONTEXT" name="gc" />
- </request>
-
- <request name="CreateRegionFromPicture" opcode="9">
- <field type="REGION" name="region" />
- <field type="PICTURE" name="picture" />
- </request>
-
- <request name="DestroyRegion" opcode="10">
- <field type="REGION" name="region" />
- </request>
-
- <request name="SetRegion" opcode="11">
- <field type="REGION" name="region" />
- <list type="RECTANGLE" name="rectangles" />
- </request>
-
- <request name="CopyRegion" opcode="12">
- <field type="REGION" name="source" />
- <field type="REGION" name="destination" />
- </request>
-
- <request name="UnionRegion" opcode="13">
- <field type="REGION" name="source1" />
- <field type="REGION" name="source2" />
- <field type="REGION" name="destination" />
- </request>
-
- <request name="IntersectRegion" opcode="14">
- <field type="REGION" name="source1" />
- <field type="REGION" name="source2" />
- <field type="REGION" name="destination" />
- </request>
-
- <request name="SubtractRegion" opcode="15">
- <field type="REGION" name="source1" />
- <field type="REGION" name="source2" />
- <field type="REGION" name="destination" />
- </request>
-
- <request name="InvertRegion" opcode="16">
- <field type="REGION" name="source" />
- <field type="RECTANGLE" name="bounds" />
- <field type="REGION" name="destination" />
- </request>
-
- <request name="TranslateRegion" opcode="17">
- <field type="REGION" name="region" />
- <field type="INT16" name="dx" />
- <field type="INT16" name="dy" />
- </request>
-
- <request name="RegionExtents" opcode="18">
- <field type="REGION" name="source" />
- <field type="REGION" name="destination" />
- </request>
-
- <request name="FetchRegion" opcode="19">
- <field type="REGION" name="region" />
- <reply>
- <pad bytes="1" />
- <field type="RECTANGLE" name="extents" />
- <pad bytes="16" />
- <list type="RECTANGLE" name="rectangles">
- <op op='/'>
- <fieldref>length</fieldref>
- <value>2</value>
- </op>
- </list>
- </reply>
- </request>
-
- <request name="SetGCClipRegion" opcode="20">
- <field type="GCONTEXT" name="gc" />
- <field type="REGION" name="region" altenum="Region" />
- <field type="INT16" name="x_origin" />
- <field type="INT16" name="y_origin" />
- </request>
-
- <request name="SetWindowShapeRegion" opcode="21">
- <field type="WINDOW" name="dest" />
- <field type="shape:KIND" name="dest_kind" enum="SK" />
- <pad bytes="3" />
- <field type="INT16" name="x_offset" />
- <field type="INT16" name="y_offset" />
- <field type="REGION" name="region" altenum="Region" />
- </request>
-
- <request name="SetPictureClipRegion" opcode="22">
- <field type="PICTURE" name="picture" />
- <field type="REGION" name="region" altenum="Region" />
- <field type="INT16" name="x_origin" />
- <field type="INT16" name="y_origin" />
- </request>
-
- <request name="SetCursorName" opcode="23">
- <field type="CURSOR" name="cursor" />
- <field type="CARD16" name="nbytes" />
- <pad bytes="2" />
- <list type="char" name="name"><fieldref>nbytes</fieldref></list>
- </request>
-
- <request name="GetCursorName" opcode="24">
- <field type="CURSOR" name="cursor" />
- <reply>
- <pad bytes="1" />
- <field type="ATOM" name="atom" altenum="Atom" />
- <field type="CARD16" name="nbytes" />
- <pad bytes="18" />
- <list type="char" name="name"><fieldref>nbytes</fieldref></list>
- </reply>
- </request>
-
- <request name="GetCursorImageAndName" opcode="25">
- <reply>
- <pad bytes="1" />
- <field type="INT16" name="x" />
- <field type="INT16" name="y" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- <field type="CARD16" name="xhot" />
- <field type="CARD16" name="yhot" />
- <field type="CARD32" name="cursor_serial" />
- <field type="ATOM" name="cursor_atom" altenum="Atom" />
- <field type="CARD16" name="nbytes" />
- <pad bytes="2" />
- <list type="char" name="name"><fieldref>nbytes</fieldref></list>
- <list type="CARD32" name="cursor_image">
- <op op="*">
- <fieldref>width</fieldref>
- <fieldref>height</fieldref>
- </op>
- </list>
- </reply>
- </request>
-
- <request name="ChangeCursor" opcode="26">
- <field type="CURSOR" name="source" />
- <field type="CURSOR" name="destination" />
- </request>
-
- <request name="ChangeCursorByName" opcode="27">
- <field type="CURSOR" name="src" />
- <field type="CARD16" name="nbytes" />
- <pad bytes="2" />
- <list type="char" name="name"><fieldref>nbytes</fieldref></list>
- </request>
-
- <!-- Version 3 -->
- <request name="ExpandRegion" opcode="28">
- <field type="REGION" name="source" />
- <field type="REGION" name="destination" />
- <field type="CARD16" name="left" />
- <field type="CARD16" name="right" />
- <field type="CARD16" name="top" />
- <field type="CARD16" name="bottom" />
- </request>
-
- <!-- Version 4 -->
- <request name="HideCursor" opcode="29">
- <field type="WINDOW" name="window" />
- </request>
-
- <request name="ShowCursor" opcode="30">
- <field type="WINDOW" name="window" />
- </request>
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2004 Josh Triplett. All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> +<!-- This file describes version 4 of XFixes. --> +<xcb header="xfixes" extension-xname="XFIXES" extension-name="XFixes" + major-version="4" minor-version="0"> + <import>xproto</import> + <import>render</import> + <import>shape</import> + + <!-- Version 1 --> + <request name="QueryVersion" opcode="0"> + <field type="CARD32" name="client_major_version" /> + <field type="CARD32" name="client_minor_version" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="major_version" /> + <field type="CARD32" name="minor_version" /> + <pad bytes="16" /> + </reply> + </request> + + <enum name="SaveSetMode"> + <item name="Insert" /> + <item name="Delete" /> + </enum> + + <enum name="SaveSetTarget"> + <item name="Nearest" /> + <item name="Root" /> + </enum> + + <enum name="SaveSetMapping"> + <item name="Map" /> + <item name="Unmap" /> + </enum> + + <request name="ChangeSaveSet" opcode="1"> + <field type="BYTE" name="mode" enum="SaveSetMode" /> + <field type="BYTE" name="target" enum="SaveSetTarget" /> + <field type="BYTE" name="map" enum="SaveSetMapping" /> + <pad bytes="1" /> + <field type="WINDOW" name="window" /> + </request> + + <enum name="SelectionEvent"> + <item name="SetSelectionOwner" /> + <item name="SelectionWindowDestroy" /> + <item name="SelectionClientClose" /> + </enum> + + <enum name="SelectionEventMask"> + <item name="SetSelectionOwner"> <bit>0</bit></item> + <item name="SelectionWindowDestroy"><bit>1</bit></item> + <item name="SelectionClientClose"> <bit>2</bit></item> + </enum> + + <event name="SelectionNotify" number="0"> + <field type="CARD8" name="subtype" enum="SelectionEvent" /> + <field type="WINDOW" name="window" /> + <field type="WINDOW" name="owner" /> + <field type="ATOM" name="selection" /> + <field type="TIMESTAMP" name="timestamp" /> + <field type="TIMESTAMP" name="selection_timestamp" /> + <pad bytes="8" /> + </event> + + <request name="SelectSelectionInput" opcode="2"> + <field type="WINDOW" name="window" /> + <field type="ATOM" name="selection" /> + <field type="CARD32" name="event_mask" mask="SelectionEventMask" /> + </request> + + <enum name="CursorNotify"> + <item name="DisplayCursor" /> + </enum> + + <enum name="CursorNotifyMask"> + <item name="DisplayCursor"><bit>0</bit></item> + </enum> + + <event name="CursorNotify" number="1"> + <field type="CARD8" name="subtype" enum="CursorNotify" /> + <field type="WINDOW" name="window" /> + <field type="CARD32" name="cursor_serial" /> + <field type="TIMESTAMP" name="timestamp" /> + <field type="ATOM" name="name" altenum="Atom" /> <!-- Added in version 2 --> + <pad bytes="12" /> + </event> + + <request name="SelectCursorInput" opcode="3"> + <field type="WINDOW" name="window" /> + <field type="CARD32" name="event_mask" mask="CursorNotifyMask" /> + </request> + + <request name="GetCursorImage" opcode="4"> + <reply> + <pad bytes="1" /> + <field type="INT16" name="x" /> + <field type="INT16" name="y" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + <field type="CARD16" name="xhot" /> + <field type="CARD16" name="yhot" /> + <field type="CARD32" name="cursor_serial" /> + <pad bytes="8" /> + <list type="CARD32" name="cursor_image"> + <op op="*"> + <fieldref>width</fieldref> + <fieldref>height</fieldref> + </op> + </list> + </reply> + </request> + + <!-- Version 2 --> + + <xidtype name="REGION" /> + + <error name="BadRegion" number="0" /> + + <enum name="Region"> + <item name="None" /> + </enum> + + <request name="CreateRegion" opcode="5"> + <field type="REGION" name="region" /> + <list type="RECTANGLE" name="rectangles" /> + </request> + + <request name="CreateRegionFromBitmap" opcode="6"> + <field type="REGION" name="region" /> + <field type="PIXMAP" name="bitmap" /> + </request> + + <request name="CreateRegionFromWindow" opcode="7"> + <field type="REGION" name="region" /> + <field type="WINDOW" name="window" /> + <field type="shape:KIND" name="kind" enum="SK" /> + <pad bytes="3" /> + </request> + + <request name="CreateRegionFromGC" opcode="8"> + <field type="REGION" name="region" /> + <field type="GCONTEXT" name="gc" /> + </request> + + <request name="CreateRegionFromPicture" opcode="9"> + <field type="REGION" name="region" /> + <field type="PICTURE" name="picture" /> + </request> + + <request name="DestroyRegion" opcode="10"> + <field type="REGION" name="region" /> + </request> + + <request name="SetRegion" opcode="11"> + <field type="REGION" name="region" /> + <list type="RECTANGLE" name="rectangles" /> + </request> + + <request name="CopyRegion" opcode="12"> + <field type="REGION" name="source" /> + <field type="REGION" name="destination" /> + </request> + + <request name="UnionRegion" opcode="13"> + <field type="REGION" name="source1" /> + <field type="REGION" name="source2" /> + <field type="REGION" name="destination" /> + </request> + + <request name="IntersectRegion" opcode="14"> + <field type="REGION" name="source1" /> + <field type="REGION" name="source2" /> + <field type="REGION" name="destination" /> + </request> + + <request name="SubtractRegion" opcode="15"> + <field type="REGION" name="source1" /> + <field type="REGION" name="source2" /> + <field type="REGION" name="destination" /> + </request> + + <request name="InvertRegion" opcode="16"> + <field type="REGION" name="source" /> + <field type="RECTANGLE" name="bounds" /> + <field type="REGION" name="destination" /> + </request> + + <request name="TranslateRegion" opcode="17"> + <field type="REGION" name="region" /> + <field type="INT16" name="dx" /> + <field type="INT16" name="dy" /> + </request> + + <request name="RegionExtents" opcode="18"> + <field type="REGION" name="source" /> + <field type="REGION" name="destination" /> + </request> + + <request name="FetchRegion" opcode="19"> + <field type="REGION" name="region" /> + <reply> + <pad bytes="1" /> + <field type="RECTANGLE" name="extents" /> + <pad bytes="16" /> + <list type="RECTANGLE" name="rectangles"> + <op op='/'> + <fieldref>length</fieldref> + <value>2</value> + </op> + </list> + </reply> + </request> + + <request name="SetGCClipRegion" opcode="20"> + <field type="GCONTEXT" name="gc" /> + <field type="REGION" name="region" altenum="Region" /> + <field type="INT16" name="x_origin" /> + <field type="INT16" name="y_origin" /> + </request> + + <request name="SetWindowShapeRegion" opcode="21"> + <field type="WINDOW" name="dest" /> + <field type="shape:KIND" name="dest_kind" enum="SK" /> + <pad bytes="3" /> + <field type="INT16" name="x_offset" /> + <field type="INT16" name="y_offset" /> + <field type="REGION" name="region" altenum="Region" /> + </request> + + <request name="SetPictureClipRegion" opcode="22"> + <field type="PICTURE" name="picture" /> + <field type="REGION" name="region" altenum="Region" /> + <field type="INT16" name="x_origin" /> + <field type="INT16" name="y_origin" /> + </request> + + <request name="SetCursorName" opcode="23"> + <field type="CURSOR" name="cursor" /> + <field type="CARD16" name="nbytes" /> + <pad bytes="2" /> + <list type="char" name="name"><fieldref>nbytes</fieldref></list> + </request> + + <request name="GetCursorName" opcode="24"> + <field type="CURSOR" name="cursor" /> + <reply> + <pad bytes="1" /> + <field type="ATOM" name="atom" altenum="Atom" /> + <field type="CARD16" name="nbytes" /> + <pad bytes="18" /> + <list type="char" name="name"><fieldref>nbytes</fieldref></list> + </reply> + </request> + + <request name="GetCursorImageAndName" opcode="25"> + <reply> + <pad bytes="1" /> + <field type="INT16" name="x" /> + <field type="INT16" name="y" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + <field type="CARD16" name="xhot" /> + <field type="CARD16" name="yhot" /> + <field type="CARD32" name="cursor_serial" /> + <field type="ATOM" name="cursor_atom" altenum="Atom" /> + <field type="CARD16" name="nbytes" /> + <pad bytes="2" /> + <list type="char" name="name"><fieldref>nbytes</fieldref></list> + <list type="CARD32" name="cursor_image"> + <op op="*"> + <fieldref>width</fieldref> + <fieldref>height</fieldref> + </op> + </list> + </reply> + </request> + + <request name="ChangeCursor" opcode="26"> + <field type="CURSOR" name="source" /> + <field type="CURSOR" name="destination" /> + </request> + + <request name="ChangeCursorByName" opcode="27"> + <field type="CURSOR" name="src" /> + <field type="CARD16" name="nbytes" /> + <pad bytes="2" /> + <list type="char" name="name"><fieldref>nbytes</fieldref></list> + </request> + + <!-- Version 3 --> + <request name="ExpandRegion" opcode="28"> + <field type="REGION" name="source" /> + <field type="REGION" name="destination" /> + <field type="CARD16" name="left" /> + <field type="CARD16" name="right" /> + <field type="CARD16" name="top" /> + <field type="CARD16" name="bottom" /> + </request> + + <!-- Version 4 --> + <request name="HideCursor" opcode="29"> + <field type="WINDOW" name="window" /> + </request> + + <request name="ShowCursor" opcode="30"> + <field type="WINDOW" name="window" /> + </request> +</xcb> diff --git a/libxcb/xcb-proto/src/xinerama.xml b/libxcb/xcb-proto/src/xinerama.xml index 5534aa6c0..b2747eeab 100644 --- a/libxcb/xcb-proto/src/xinerama.xml +++ b/libxcb/xcb-proto/src/xinerama.xml @@ -1,99 +1,99 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2006 Jeremy Kolb.
-All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-
-<xcb header="xinerama" extension-xname="XINERAMA" extension-name="Xinerama"
- major-version="1" minor-version="1">
-
- <!-- Version 1.1 -->
-
- <import>xproto</import>
-
- <struct name="ScreenInfo">
- <field type="INT16" name="x_org" />
- <field type="INT16" name="y_org" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- </struct>
-
- <request name="QueryVersion" opcode="0">
- <field type="CARD8" name="major" />
- <field type="CARD8" name="minor" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="major" />
- <field type="CARD16" name="minor" />
- </reply>
- </request>
-
- <request name="GetState" opcode="1">
- <field type="WINDOW" name="window" />
- <reply>
- <field type="BYTE" name="state" />
- <field type="WINDOW" name="window" />
- </reply>
- </request>
-
- <request name="GetScreenCount" opcode="2">
- <field type="WINDOW" name="window" />
- <reply>
- <field type="BYTE" name="screen_count" />
- <field type="WINDOW" name="window" />
- </reply>
- </request>
-
- <request name="GetScreenSize" opcode="3">
- <field type="WINDOW" name="window" />
- <field type="CARD32" name="screen" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="width" />
- <field type="CARD32" name="height" />
- <field type="WINDOW" name="window" />
- <field type="CARD32" name="screen" />
- </reply>
- </request>
-
- <request name="IsActive" opcode="4">
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="state" />
- </reply>
- </request>
-
- <request name="QueryScreens" opcode="5">
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="number" />
- <pad bytes="20" />
- <list type="ScreenInfo" name="screen_info">
- <fieldref>number</fieldref>
- </list>
- </reply>
- </request>
-
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2006 Jeremy Kolb. +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> + +<xcb header="xinerama" extension-xname="XINERAMA" extension-name="Xinerama" + major-version="1" minor-version="1"> + + <!-- Version 1.1 --> + + <import>xproto</import> + + <struct name="ScreenInfo"> + <field type="INT16" name="x_org" /> + <field type="INT16" name="y_org" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + </struct> + + <request name="QueryVersion" opcode="0"> + <field type="CARD8" name="major" /> + <field type="CARD8" name="minor" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="major" /> + <field type="CARD16" name="minor" /> + </reply> + </request> + + <request name="GetState" opcode="1"> + <field type="WINDOW" name="window" /> + <reply> + <field type="BYTE" name="state" /> + <field type="WINDOW" name="window" /> + </reply> + </request> + + <request name="GetScreenCount" opcode="2"> + <field type="WINDOW" name="window" /> + <reply> + <field type="BYTE" name="screen_count" /> + <field type="WINDOW" name="window" /> + </reply> + </request> + + <request name="GetScreenSize" opcode="3"> + <field type="WINDOW" name="window" /> + <field type="CARD32" name="screen" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="width" /> + <field type="CARD32" name="height" /> + <field type="WINDOW" name="window" /> + <field type="CARD32" name="screen" /> + </reply> + </request> + + <request name="IsActive" opcode="4"> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="state" /> + </reply> + </request> + + <request name="QueryScreens" opcode="5"> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="number" /> + <pad bytes="20" /> + <list type="ScreenInfo" name="screen_info"> + <fieldref>number</fieldref> + </list> + </reply> + </request> + +</xcb> diff --git a/libxcb/xcb-proto/src/xinput.xml b/libxcb/xcb-proto/src/xinput.xml index b0a7a82e8..80416fe3f 100644 --- a/libxcb/xcb-proto/src/xinput.xml +++ b/libxcb/xcb-proto/src/xinput.xml @@ -1,1020 +1,1020 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2006 Peter Hutterer
-All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-
-<!-- Spec: http://refspecs.freestandards.org/X11/Xinput.pdf -->
-
-<xcb header="xinput" extension-xname="XInputExtension" extension-name="Input"
- major-version="1" minor-version="4">
- <import>xproto</import>
-
- <typedef oldname="CARD8" newname="KeyCode" />
- <typedef oldname="CARD32" newname="EventClass" />
-
- <enum name="ValuatorMode">
- <item name="Relative"> <value>0</value></item>
- <item name="Absolute"> <value>1</value></item>
- </enum>
-
- <enum name="PropagateMode">
- <item name="AddToList"> <value>0</value></item>
- <item name="DeleteFromList"> <value>1</value></item>
- </enum>
-
- <!-- GetExtensionVersion -->
-
- <request name="GetExtensionVersion" opcode="1">
- <field type="CARD16" name="name_len" />
- <pad bytes="2" />
- <list type="char" name="name">
- <fieldref>name_len</fieldref>
- </list>
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="server_major" />
- <field type="CARD16" name="server_minor" />
- <field type="BOOL" name="present" />
- <pad bytes="19" />
- </reply>
- </request>
-
- <!-- ListInputDevices -->
-
- <enum name="DeviceUse">
- <item name="IsXPointer"><value>0</value></item>
- <item name="IsXKeyboard"><value>1</value></item>
- <item name="IsXExtensionDevice"><value>2</value></item>
- <item name="IsXExtensionKeyboard"><value>3</value></item>
- <item name="IsXExtensionPointer"><value>4</value></item>
- </enum>
-
- <struct name="DeviceInfo">
- <field type="ATOM" name="device_type" />
- <field type="CARD8" name="device_id" />
- <field type="CARD8" name="num_class_info" />
- <field type="CARD8" name="device_use" enum="DeviceUse" />
- <pad bytes="1" />
- </struct>
-
- <request name="ListInputDevices" opcode="2">
- <reply>
- <pad bytes="1" />
- <field type="CARD8" name="devices_len" />
- <pad bytes="23" />
- <list type="DeviceInfo" name="devices">
- <fieldref>devices_len</fieldref>
- </list>
- <!-- Uninterpreted: list of deviceinfo structs of 3 the subtypes -->
- <!-- Uninterpreted: list of null-terminated strings -->
- </reply>
- </request>
-
- <enum name="InputClass">
- <item name="Key"><value>0</value></item>
- <item name="Button"><value>1</value></item>
- <item name="Valuator"><value>2</value></item>
- <item name="Feedback"><value>3</value></item>
- <item name="Proximity"><value>4</value></item>
- <item name="Focus"><value>5</value></item>
- <item name="Other"><value>6</value></item>
- </enum>
-
- <struct name="InputInfo">
- <field type="CARD8" name="class_id" enum="InputClass" />
- <field type="CARD8" name="len" />
- </struct>
-
- <struct name="KeyInfo">
- <field type="CARD8" name="class_id" enum="InputClass" />
- <field type="CARD8" name="len" />
- <field type="KeyCode" name="min_keycode" />
- <field type="KeyCode" name="max_keycode" />
- <field type="CARD16" name="num_keys" />
- <pad bytes="2" />
- </struct>
-
- <struct name="ButtonInfo">
- <field type="CARD8" name="class_id" enum="InputClass" />
- <field type="CARD8" name="len" />
- <field type="CARD16" name="num_buttons" />
- </struct>
-
- <struct name="AxisInfo">
- <field type="CARD32" name="resolution" />
- <field type="INT32" name="minimum" />
- <field type="INT32" name="maximum" />
- </struct>
-
- <struct name="ValuatorInfo">
- <field type="CARD8" name="class_id" enum="InputClass" />
- <field type="CARD8" name="len" />
- <field type="CARD8" name="axes_len" />
- <field type="CARD8" name="mode" enum="ValuatorMode" />
- <field type="CARD32" name="motion_size" />
- <list type="AxisInfo" name="axes">
- <fieldref>axes_len</fieldref>
- </list>
- </struct>
-
- <!-- OpenDevice -->
-
- <struct name="InputClassInfo">
- <field type="CARD8" name="class_id" enum="InputClass" />
- <field type="CARD8" name="event_type_base" />
- </struct>
-
- <request name="OpenDevice" opcode="3">
- <field type="CARD8" name="device_id" />
- <pad bytes="3" />
- <reply>
- <pad bytes="1" />
- <field type="CARD8" name="num_classes" />
- <pad bytes="23" />
- <list type="InputClassInfo" name="class_info">
- <fieldref>num_classes</fieldref>
- </list>
- </reply>
- </request>
-
- <!-- CloseDevice -->
-
- <request name="CloseDevice" opcode="4">
- <field type="CARD8" name="device_id" />
- <pad bytes="3" />
- </request>
-
- <!-- SetDeviceMode -->
-
- <request name="SetDeviceMode" opcode="5">
- <field type="CARD8" name="device_id" />
- <field type="CARD8" name="mode" enum="ValuatorMode" />
- <pad bytes="2" />
- <reply>
- <pad bytes="1" />
- <field type="CARD8" name="status" altenum="GrabStatus" />
- <pad bytes="23" />
- </reply>
- </request>
-
- <!-- SelectExtensionEvent -->
-
- <request name="SelectExtensionEvent" opcode="6">
- <field type="WINDOW" name="window" />
- <field type="CARD16" name="num_classes" />
- <pad bytes="2" />
- <list type="EventClass" name="classes">
- <fieldref>num_classes</fieldref>
- </list>
- </request>
-
- <!-- GetSelectedExtensionEvents -->
-
- <request name="GetSelectedExtensionEvents" opcode="7">
- <field type="WINDOW" name="window" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="num_this_classes" />
- <field type="CARD16" name="num_all_classes" />
- <pad bytes="20" />
- <list type="EventClass" name="this_classes">
- <fieldref>num_this_classes</fieldref>
- </list>
- <list type="EventClass" name="all_classes">
- <fieldref>num_all_classes</fieldref>
- </list>
- </reply>
- </request>
-
- <!-- ChangeDeviceDontPropagateList -->
-
- <request name="ChangeDeviceDontPropagateList" opcode="8">
- <field type="WINDOW" name="window" />
- <field type="CARD16" name="num_classes" />
- <field type="CARD8" name="mode" enum="PropagateMode" />
- <pad bytes="1" />
- <list type="EventClass" name="classes">
- <fieldref>num_classes</fieldref>
- </list>
- </request>
-
- <!-- GetDeviceDontPropagateList -->
-
- <request name="GetDeviceDontPropagateList" opcode="9">
- <field type="WINDOW" name="window" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="num_classes" />
- <pad bytes="22" />
- <list type="EventClass" name="classes">
- <fieldref>num_classes</fieldref>
- </list>
- </reply>
- </request>
-
- <!-- GetDeviceMotionEvents -->
-
- <request name="GetDeviceMotionEvents" opcode="10">
- <field type="TIMESTAMP" name="start" />
- <field type="TIMESTAMP" name="stop" altenum="Time" />
- <field type="CARD8" name="device_id" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="num_coords" />
- <field type="CARD8" name="num_axes" />
- <field type="CARD8" name="device_mode" enum="ValuatorMode" />
- <pad bytes="18" />
- <!-- Uninterpreted: list of DeviceTimeCoord structures -->
- </reply>
- </request>
-
- <struct name="DeviceTimeCoord">
- <field type="TIMESTAMP" name="time" />
- <!-- Uninterpreted: list of CARD16 -->
- </struct>
-
- <!-- ChangeKeyboardDevice -->
- <request name="ChangeKeyboardDevice" opcode="11">
- <field type="CARD8" name="device_id" />
- <pad bytes="3" />
- <reply>
- <pad bytes="1" />
- <field type="CARD8" name="status" altenum="GrabStatus" />
- <pad bytes="23" />
- </reply>
- </request>
-
- <!-- ChangePointerDevice -->
-
- <request name="ChangePointerDevice" opcode="12">
- <field type="CARD8" name="x_axis" />
- <field type="CARD8" name="y_axis" />
- <field type="CARD8" name="device_id" />
- <pad bytes="1" />
- <reply>
- <pad bytes="1" />
- <field type="CARD8" name="status" altenum="GrabStatus" />
- <pad bytes="23" />
- </reply>
- </request>
-
- <!-- GrabDevice -->
-
- <request name="GrabDevice" opcode="13">
- <field type="WINDOW" name="grab_window" />
- <field type="TIMESTAMP" name="time" altenum="Time" />
- <field type="CARD16" name="num_classes" />
- <field type="CARD8" name="this_device_mode" enum="GrabMode" />
- <field type="CARD8" name="other_device_mode" enum="GrabMode" />
- <field type="BOOL" name="owner_events" />
- <field type="CARD8" name="device_id" />
- <pad bytes="2" />
- <list type="EventClass" name="classes">
- <fieldref>num_classes</fieldref>
- </list>
- <reply>
- <pad bytes="1" />
- <field type="CARD8" name="status" enum="GrabStatus" />
- <pad bytes="23" />
- </reply>
- </request>
-
- <!-- UngrabDevice -->
-
- <request name="UngrabDevice" opcode="14">
- <field type="TIMESTAMP" name="time" altenum="Time" />
- <field type="CARD8" name="device_id" />
- </request>
-
- <!-- GrabDeviceKey -->
-
- <request name="GrabDeviceKey" opcode="15">
- <field type="WINDOW" name="grab_window" />
- <field type="CARD16" name="num_classes" />
- <field type="CARD16" name="modifiers" mask="ModMask" />
- <field type="CARD8" name="modifier_device" />
- <field type="CARD8" name="grabbed_device" />
- <field type="CARD8" name="key" altenum="Grab" />
- <field type="CARD8" name="this_device_mode" enum="GrabMode" />
- <field type="CARD8" name="other_device_mode" enum="GrabMode" />
- <field type="BOOL" name="owner_events" />
- <pad bytes="2" />
- <list type="EventClass" name="classes">
- <fieldref>num_classes</fieldref>
- </list>
- </request>
-
- <!-- UngrabDeviceKey -->
-
- <request name="UngrabDeviceKey" opcode="16">
- <field type="WINDOW" name="grabWindow" />
- <field type="CARD16" name="modifiers" mask="ModMask" />
- <field type="CARD8" name="modifier_device" />
- <field type="CARD8" name="key" altenum="Grab" />
- <field type="CARD8" name="grabbed_device" />
- </request>
-
- <!-- GrabDeviceButton -->
-
- <request name="GrabDeviceButton" opcode="17">
- <field type="WINDOW" name="grab_window" />
- <field type="CARD8" name="grabbed_device" />
- <field type="CARD8" name="modifier_device" />
- <field type="CARD16" name="num_classes" />
- <field type="CARD16" name="modifiers" mask="ModMask" />
- <field type="CARD8" name="this_device_mode" enum="GrabMode" />
- <field type="CARD8" name="other_device_mode" enum="GrabMode" />
- <field type="CARD8" name="button" altenum="Grab" />
- <field type="CARD8" name="owner_events" />
- <pad bytes="2" />
- <list type="EventClass" name="classes">
- <fieldref>num_classes</fieldref>
- </list>
- </request>
-
- <!-- UngrabDeviceButton -->
-
- <request name="UngrabDeviceButton" opcode="18">
- <field type="WINDOW" name="grab_window" />
- <field type="CARD16" name="modifiers" mask="ModMask" />
- <field type="CARD8" name="modifier_device" />
- <field type="CARD8" name="button" altenum="Grab" />
- <field type="CARD8" name="grabbed_device" />
- </request>
-
- <!-- AllowDeviceEvents -->
-
- <enum name="DeviceInputMode">
- <item name="AsyncThisDevice" />
- <item name="SyncThisDevice" />
- <item name="ReplayThisDevice" />
- <item name="AsyncOtherDevices" />
- <item name="AsyncAll" />
- <item name="SyncAll" />
- </enum>
-
- <request name="AllowDeviceEvents" opcode="19">
- <field type="TIMESTAMP" name="time" altenum="Time" />
- <field type="CARD8" name="mode" enum="DeviceInputMode" />
- <field type="CARD8" name="device_id" />
- </request>
-
- <!-- GetDeviceFocus -->
-
- <request name="GetDeviceFocus" opcode="20">
- <field type="CARD8" name="device_id" />
- <pad bytes="3" />
- <reply>
- <pad bytes="1" />
- <field type="WINDOW" name="focus" altenum="InputFocus" />
- <field type="TIMESTAMP" name="time" />
- <field type="CARD8" name="revert_to" enum="InputFocus" />
- <pad bytes="15" />
- </reply>
- </request>
-
- <!-- SetDeviceFocus -->
-
- <request name="SetDeviceFocus" opcode="21">
- <field type="WINDOW" name="focus" altenum="InputFocus" />
- <field type="TIMESTAMP" name="time" altenum="Time" />
- <field type="CARD8" name="revert_to" enum="InputFocus" />
- <field type="CARD8" name="device_id" />
- </request>
-
- <!-- GetFeedbackControl -->
-
- <request name="GetFeedbackControl" opcode="22">
- <field type="CARD8" name="device_id" />
- <pad bytes="3" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="num_feedback" />
- <pad bytes="22" />
- <!-- Uninterpreted: list of FeedbackState structures -->
- </reply>
- </request>
-
- <enum name="FeedbackClass">
- <item name="Keyboard" />
- <item name="Pointer" />
- <item name="String" />
- <item name="Integer" />
- <item name="Led" />
- <item name="Bell" />
- </enum>
-
- <struct name="FeedbackState">
- <field type="CARD8" name="class_id" enum="FeedbackClass" />
- <field type="CARD8" name="id" />
- <field type="CARD16" name="len" />
- </struct>
-
- <struct name="KbdFeedbackState">
- <field type="CARD8" name="class_id" enum="FeedbackClass" />
- <field type="CARD8" name="id" />
- <field type="CARD16" name="len" />
- <field type="CARD16" name="pitch" />
- <field type="CARD16" name="duration" />
- <field type="CARD32" name="led_mask" />
- <field type="CARD32" name="led_values" />
- <field type="BOOL" name="global_auto_repeat" />
- <field type="CARD8" name="click" />
- <field type="CARD8" name="percent" />
- <pad bytes="1" />
- <list type="CARD8" name="auto_repeats"><value>32</value></list>
- </struct>
-
- <struct name="PtrFeedbackState">
- <field type="CARD8" name="class_id" enum="FeedbackClass" />
- <field type="CARD8" name="id" />
- <field type="CARD16" name="len" />
- <pad bytes="2" />
- <field type="CARD16" name="accel_num" />
- <field type="CARD16" name="accel_denom" />
- <field type="CARD16" name="threshold" />
- </struct>
-
- <struct name="IntegerFeedbackState">
- <field type="CARD8" name="class_id" enum="FeedbackClass" />
- <field type="CARD8" name="id" />
- <field type="CARD16" name="len" />
- <field type="CARD32" name="resolution" />
- <field type="INT32" name="min_value" />
- <field type="INT32" name="max_value" />
- </struct>
-
- <struct name="StringFeedbackState">
- <field type="CARD8" name="class_id" enum="FeedbackClass" />
- <field type="CARD8" name="id" />
- <field type="CARD16" name="len" />
- <field type="CARD16" name="max_symbols" />
- <field type="CARD16" name="num_keysyms" />
- <list type="KEYSYM" name="keysyms">
- <fieldref>num_keysyms</fieldref>
- </list>
- </struct>
-
- <struct name="BellFeedbackState">
- <field type="CARD8" name="class_id" enum="FeedbackClass" />
- <field type="CARD8" name="id" />
- <field type="CARD16" name="len" />
- <field type="CARD8" name="percent" />
- <pad bytes="3" />
- <field type="CARD16" name="pitch" />
- <field type="CARD16" name="duration" />
- </struct>
-
- <struct name="LedFeedbackState">
- <field type="CARD8" name="class_id" enum="FeedbackClass" />
- <field type="CARD8" name="id" />
- <field type="CARD16" name="len" />
- <field type="CARD32" name="led_mask" />
- <field type="CARD32" name="led_values" />
- </struct>
-
- <!-- ChangeFeedbackControl
-
- <request name="ChangeFeedbackControl" opcode="23">
- <field type="CARD32" name="mask" />
- <field type="CARD8" name="device_id" />
- <field type="CARD8" name="feedback_id" />
- Uninterpreted: list of FeedbackCtl structures
- </request>
-
- -->
-
- <struct name="FeedbackCtl">
- <field type="CARD8" name="class_id" enum="FeedbackClass" />
- <field type="CARD8" name="id" />
- <field type="CARD16" name="len" />
- </struct>
-
- <struct name="KbdFeedbackCtl">
- <field type="CARD8" name="class_id" enum="FeedbackClass" />
- <field type="CARD8" name="id" />
- <field type="CARD16" name="len" />
- <field type="KeyCode" name="key" />
- <field type="CARD8" name="auto_repeat_mode" />
- <field type="INT8" name="key_click_percent" />
- <field type="INT8" name="bell_percent" />
- <field type="INT16" name="bell_pitch" />
- <field type="INT16" name="bell_duration" />
- <field type="CARD32" name="led_mask" />
- <field type="CARD32" name="led_values" />
- </struct>
-
- <struct name="PtrFeedbackCtl">
- <field type="CARD8" name="class_id" enum="FeedbackClass" />
- <field type="CARD8" name="id" />
- <field type="CARD16" name="len" />
- <pad bytes="2" />
- <field type="INT16" name="num" />
- <field type="INT16" name="denom" />
- <field type="INT16" name="threshold" />
- </struct>
-
- <struct name="IntegerFeedbackCtl">
- <field type="CARD8" name="class_id" enum="FeedbackClass" />
- <field type="CARD8" name="id" />
- <field type="CARD16" name="len" />
- <field type="INT32" name="int_to_display" />
- </struct>
-
- <struct name="StringFeedbackCtl">
- <field type="CARD8" name="class_id" enum="FeedbackClass" />
- <field type="CARD8" name="id" />
- <field type="CARD16" name="len" />
- <pad bytes="2" />
- <field type="CARD16" name="num_keysyms" />
- <list type="KEYSYM" name="keysyms">
- <fieldref>num_keysyms</fieldref>
- </list>
- </struct>
-
- <struct name="BellFeedbackCtl">
- <field type="CARD8" name="class_id" enum="FeedbackClass" />
- <field type="CARD8" name="id" />
- <field type="CARD16" name="len" />
- <field type="INT8" name="percent" />
- <pad bytes="3" />
- <field type="INT16" name="pitch" />
- <field type="INT16" name="duration" />
- </struct>
-
- <struct name="LedFeedbackCtl">
- <field type="CARD8" name="class_id" enum="FeedbackClass" />
- <field type="CARD8" name="id" />
- <field type="CARD16" name="len" />
- <field type="CARD32" name="led_mask" />
- <field type="CARD32" name="led_values" />
- </struct>
-
- <!-- GetDeviceKeyMapping -->
-
- <request name="GetDeviceKeyMapping" opcode="24">
- <field type="CARD8" name="device_id" />
- <field type="KeyCode" name="first_keycode" />
- <field type="CARD8" name="count" />
- <reply>
- <pad bytes="1" />
- <field type="CARD8" name="keysyms_per_keycode" />
- <pad bytes="23" />
- <list type="KEYSYM" name="keysyms">
- <fieldref>length</fieldref>
- </list>
- </reply>
- </request>
-
- <!-- ChangeDeviceKeyMapping -->
-
- <request name="ChangeDeviceKeyMapping" opcode="25">
- <field type="CARD8" name="device_id" />
- <field type="KeyCode" name="first_keycode" />
- <field type="CARD8" name="keysyms_per_keycode" />
- <field type="CARD8" name="keycode_count" />
- <list type="KEYSYM" name="keysyms">
- <op op="*">
- <fieldref>keycode_count</fieldref>
- <fieldref>keysyms_per_keycode</fieldref>
- </op>
- </list>
- </request>
-
- <!-- GetDeviceModifierMapping -->
-
- <request name="GetDeviceModifierMapping" opcode="26">
- <field type="CARD8" name="device_id" />
- <pad bytes="3" />
- <reply>
- <pad bytes="1" />
- <field type="CARD8" name="keycodes_per_modifier" />
- <pad bytes="23" />
- <list type="CARD8" name="keymaps">
- <op op="*">
- <fieldref>keycodes_per_modifier</fieldref>
- <value>8</value>
- </op>
- </list>
- </reply>
- </request>
-
- <!-- SetDeviceModifierMapping -->
-
- <request name="SetDeviceModifierMapping" opcode="27">
- <field type="CARD8" name="device_id" />
- <field type="CARD8" name="keycodes_per_modifier" />
- <pad bytes="1" />
- <list type="CARD8" name="keymaps">
- <op op="*">
- <fieldref>keycodes_per_modifier</fieldref>
- <value>8</value>
- </op>
- </list>
- <reply>
- <pad bytes="1" />
- <field type="CARD8" name="status" enum="MappingStatus" />
- <pad bytes="23" />
- </reply>
- </request>
-
- <!-- GetDeviceButtonMapping -->
-
- <request name="GetDeviceButtonMapping" opcode="28">
- <field type="CARD8" name="device_id" />
- <pad bytes="3" />
- <reply>
- <pad bytes="1" />
- <field type="CARD8" name="map_size" />
- <pad bytes="23" />
- <list type="CARD8" name="map">
- <fieldref>map_size</fieldref>
- </list>
- </reply>
- </request>
-
- <!-- SetDeviceButtonMapping -->
-
- <request name="SetDeviceButtonMapping" opcode="29">
- <field type="CARD8" name="device_id" />
- <field type="CARD8" name="map_size" />
- <pad bytes="2" />
- <list type="CARD8" name="map">
- <fieldref>map_size</fieldref>
- </list>
- <reply>
- <pad bytes="1" />
- <field type="CARD8" name="status" enum="MappingStatus" />
- <pad bytes="23" />
- </reply>
- </request>
-
- <!-- QueryDeviceState -->
-
- <request name="QueryDeviceState" opcode="30">
- <field type="CARD8" name="device_id" />
- <pad bytes="3" />
- <reply>
- <pad bytes="1" />
- <field type="CARD8" name="num_classes" />
- <pad bytes="23" />
- <!-- Uninterpreted: list of InputState structures -->
- </reply>
- </request>
-
- <struct name="InputState">
- <field type="CARD8" name="class_id" enum="InputClass" />
- <field type="CARD8" name="len" />
- <field type="CARD8" name="num_items" />
- </struct>
-
- <struct name="KeyState">
- <field type="CARD8" name="class_id" enum="InputClass" />
- <field type="CARD8" name="len" />
- <field type="CARD8" name="num_keys" />
- <pad bytes="1" />
- <list type="CARD8" name="keys">
- <value>32</value>
- </list>
- </struct>
-
- <struct name="ButtonState">
- <field type="CARD8" name="class_id" enum="InputClass" />
- <field type="CARD8" name="len" />
- <field type="CARD8" name="num_buttons" />
- <pad bytes="1" />
- <list type="CARD8" name="buttons">
- <value>32</value>
- </list>
- </struct>
-
- <struct name="ValuatorState">
- <field type="CARD8" name="class_id" enum="InputClass" />
- <field type="CARD8" name="len" />
- <field type="CARD8" name="num_valuators" />
- <field type="CARD8" name="mode" />
- <list type="CARD32" name="valuators">
- <fieldref>num_valuators</fieldref>
- </list>
- </struct>
-
- <!-- SendExtensionEvent -->
-
- <request name="SendExtensionEvent" opcode="31">
- <field type="WINDOW" name="destination" />
- <field type="CARD8" name="device_id" />
- <field type="BOOL" name="propagate" />
- <field type="CARD16" name="num_classes" />
- <field type="CARD8" name="num_events" />
- <pad bytes="3" />
- <list type="char" name="events">
- <op op="*">
- <fieldref>num_events</fieldref>
- <value>32</value>
- </op>
- </list>
- <list type="EventClass" name="classes">
- <fieldref>num_classes</fieldref>
- </list>
- </request>
-
- <!-- DeviceBell -->
-
- <request name="DeviceBell" opcode="32">
- <field type="CARD8" name="device_id" />
- <field type="CARD8" name="feedback_id" />
- <field type="CARD8" name="feedback_class" />
- <field type="INT8" name="percent" />
- </request>
-
- <!-- SetDeviceValuators -->
-
- <request name="SetDeviceValuators" opcode="33">
- <field type="CARD8" name="device_id" />
- <field type="CARD8" name="first_valuator" />
- <field type="CARD8" name="num_valuators" />
- <pad bytes="1" />
- <list type="INT32" name="valuators">
- <fieldref>num_valuators</fieldref>
- </list>
- <reply>
- <pad bytes="1" />
- <field type="CARD8" name="status" enum="GrabStatus" />
- <pad bytes="23" />
- </reply>
- </request>
-
- <!-- GetDeviceControl -->
-
- <request name="GetDeviceControl" opcode="34">
- <field type="CARD16" name="control_id" />
- <field type="CARD8" name="device_id" />
- <pad bytes="1" />
- <reply>
- <pad bytes="1" />
- <field type="CARD8" name="status" altenum="GrabStatus" />
- <pad bytes="23" />
- <!-- Uninterpreted: list of DeviceState structures -->
- </reply>
- </request>
-
- <struct name="DeviceState">
- <field type="CARD16" name="control_id" />
- <field type="CARD16" name="len" />
- </struct>
-
- <struct name="DeviceResolutionState">
- <field type="CARD16" name="control_id" />
- <field type="CARD16" name="len" />
- <field type="CARD32" name="num_valuators" />
- <list type="CARD32" name="resolution_values">
- <fieldref>num_valuators</fieldref>
- </list>
- <list type="CARD32" name="resolution_min">
- <fieldref>num_valuators</fieldref>
- </list>
- <list type="CARD32" name="resolution_max">
- <fieldref>num_valuators</fieldref>
- </list>
- </struct>
-
- <struct name="DeviceAbsCalibState">
- <field type="CARD16" name="control_id" />
- <field type="CARD16" name="len" />
- <field type="INT32" name="min_x" />
- <field type="INT32" name="max_x" />
- <field type="INT32" name="min_y" />
- <field type="INT32" name="max_y" />
- <field type="CARD32" name="flip_x" />
- <field type="CARD32" name="flip_y" />
- <field type="CARD32" name="rotation" />
- <field type="CARD32" name="button_threshold" />
- </struct>
-
- <struct name="DeviceAbsAreaState">
- <field type="CARD16" name="control_id" />
- <field type="CARD16" name="len" />
- <field type="CARD32" name="offset_x" />
- <field type="CARD32" name="offset_y" />
- <field type="CARD32" name="width" />
- <field type="CARD32" name="height" />
- <field type="CARD32" name="screen" />
- <field type="CARD32" name="following" />
- </struct>
-
- <struct name="DeviceCoreState">
- <field type="CARD16" name="control_id" />
- <field type="CARD16" name="len" />
- <field type="CARD8" name="status" />
- <field type="CARD8" name="iscore" />
- <pad bytes="2" />
- </struct>
-
- <struct name="DeviceEnableState">
- <field type="CARD16" name="control_id" />
- <field type="CARD16" name="len" />
- <field type="CARD8" name="enable" />
- <pad bytes="3" />
- </struct>
-
- <!-- ChangeDeviceControl
-
- <request name="ChangeDeviceControl" opcode="35">
- <field type="CARD16" name="control_id" />
- <field type="CARD8" name="device_id" />
- <pad bytes="1" />
- Uninterpreted: list of DeviceCtl structures
- <reply>
- <pad byte="1" />
- <field type="CARD8" name="status" altenum="GrabStatus" />
- <pad bytes="23" />
- </reply>
- </request>
-
- -->
-
- <struct name="DeviceCtl">
- <field type="CARD16" name="control_id" />
- <field type="CARD16" name="len" />
- </struct>
-
- <struct name="DeviceResolutionCtl">
- <field type="CARD16" name="control_id" />
- <field type="CARD16" name="len" />
- <field type="CARD8" name="first_valuator" />
- <field type="CARD8" name="num_valuators" />
- <list type="CARD32" name="resolution_values">
- <fieldref>num_valuators</fieldref>
- </list>
- </struct>
-
- <struct name="DeviceAbsCalibCtl">
- <field type="CARD16" name="control_id" />
- <field type="CARD16" name="len" />
- <field type="INT32" name="min_x" />
- <field type="INT32" name="max_x" />
- <field type="INT32" name="min_y" />
- <field type="INT32" name="max_y" />
- <field type="CARD32" name="flip_x" />
- <field type="CARD32" name="flip_y" />
- <field type="CARD32" name="rotation" />
- <field type="CARD32" name="button_threshold" />
- </struct>
-
- <struct name="DeviceAbsAreaCtrl">
- <field type="CARD16" name="control_id" />
- <field type="CARD16" name="len" />
- <field type="CARD32" name="offset_x" />
- <field type="CARD32" name="offset_y" />
- <field type="INT32" name="width" />
- <field type="INT32" name="height" />
- <field type="INT32" name="screen" />
- <field type="CARD32" name="following" />
- </struct>
-
- <struct name="DeviceCoreCtrl">
- <field type="CARD16" name="control_id" />
- <field type="CARD16" name="len" />
- <field type="CARD8" name="status" />
- <pad bytes="3" />
- </struct>
-
- <struct name="DeviceEnableCtrl">
- <field type="CARD16" name="control_id" />
- <field type="CARD16" name="len" />
- <field type="CARD8" name="enable" />
- <pad bytes="3" />
- </struct>
-
- <!-- EVENTS -->
-
- <event name="DeviceValuator" number="0">
- <field type="CARD8" name="device_id" />
- <field type="CARD16" name="device_state" />
- <field type="CARD8" name="num_valuators" />
- <field type="CARD8" name="first_valuator" />
- <list type="INT32" name="valuators"><value>6</value></list>
- </event>
-
- <event name="DeviceKeyPress" number="1">
- <field type="BYTE" name="detail" />
- <field type="TIMESTAMP" name="time" />
- <field type="WINDOW" name="root" />
- <field type="WINDOW" name="event" />
- <field type="WINDOW" name="child" altenum="Window" />
- <field type="INT16" name="root_x" />
- <field type="INT16" name="root_y" />
- <field type="INT16" name="event_x" />
- <field type="INT16" name="event_y" />
- <field type="CARD16" name="state" />
- <field type="BOOL" name="same_screen" />
- <field type="CARD8" name="device_id" />
- </event>
-
- <eventcopy name="DeviceKeyRelease" number="2" ref="DeviceKeyPress" />
- <eventcopy name="DeviceButtonPress" number="3" ref="DeviceKeyPress" />
- <eventcopy name="DeviceButtonRelease" number="4" ref="DeviceKeyPress" />
- <eventcopy name="DeviceMotionNotify" number="5" ref="DeviceKeyPress" />
- <eventcopy name="ProximityIn" number="8" ref="DeviceKeyPress" />
- <eventcopy name="ProximityOut" number="9" ref="DeviceKeyPress" />
-
- <event name="FocusIn" number="6">
- <field type="BYTE" name="detail" enum="NotifyDetail" />
- <field type="TIMESTAMP" name="time" />
- <field type="WINDOW" name="window" />
- <field type="BYTE" name="mode" enum="NotifyMode" />
- <field type="CARD8" name="device_id" />
- <pad bytes="18" />
- </event>
-
- <eventcopy name="FocusOut" number="7" ref="FocusIn" />
-
- <event name="DeviceStateNotify" number="10">
- <field type="BYTE" name="device_id" />
- <field type="TIMESTAMP" name="time" />
- <field type="CARD8" name="num_keys" />
- <field type="CARD8" name="num_buttons" />
- <field type="CARD8" name="num_valuators" />
- <field type="CARD8" name="classes_reported" />
- <list type="CARD8" name="buttons">
- <value>4</value>
- </list>
- <list type="CARD8" name="keys">
- <value>4</value>
- </list>
- <list type="CARD32" name="valuators">
- <value>3</value>
- </list>
- </event>
-
- <event name="DeviceMappingNotify" number="11">
- <field type="BYTE" name="device_id" />
- <field type="CARD8" name="request" />
- <field type="KeyCode" name="first_keycode" />
- <field type="CARD8" name="count" />
- <pad bytes="1" />
- <field type="TIMESTAMP" name="time" />
- <pad bytes="20" />
- </event>
-
- <event name="ChangeDeviceNotify" number="12">
- <field type="BYTE" name="device_id" />
- <field type="TIMESTAMP" name="time" />
- <field type="CARD8" name="request" />
- <pad bytes="23" />
- </event>
-
- <event name="DeviceKeyStateNotify" number="13">
- <field type="BYTE" name="device_id" />
- <list type="CARD8" name="keys">
- <value>28</value>
- </list>
- </event>
-
- <event name="DeviceButtonStateNotify" number="14">
- <field type="BYTE" name="device_id" />
- <list type="CARD8" name="buttons">
- <value>28</value>
- </list>
- </event>
-
- <event name="DevicePresenceNotify" number="15">
- <pad bytes="1" />
- <field type="TIMESTAMP" name="time" />
- <field type="BYTE" name="devchange" />
- <field type="BYTE" name="device_id" />
- <field type="CARD16" name="control" />
- <pad bytes="20" />
- </event>
-
- <!-- ERRORS -->
- <error name="Device" number="0" />
- <error name="Event" number="1" />
- <error name="Mode" number="2" />
- <error name="DeviceBusy" number="3" />
- <error name="Class" number="4" />
-
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2006 Peter Hutterer +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> + +<!-- Spec: http://refspecs.freestandards.org/X11/Xinput.pdf --> + +<xcb header="xinput" extension-xname="XInputExtension" extension-name="Input" + major-version="1" minor-version="4"> + <import>xproto</import> + + <typedef oldname="CARD8" newname="KeyCode" /> + <typedef oldname="CARD32" newname="EventClass" /> + + <enum name="ValuatorMode"> + <item name="Relative"> <value>0</value></item> + <item name="Absolute"> <value>1</value></item> + </enum> + + <enum name="PropagateMode"> + <item name="AddToList"> <value>0</value></item> + <item name="DeleteFromList"> <value>1</value></item> + </enum> + + <!-- GetExtensionVersion --> + + <request name="GetExtensionVersion" opcode="1"> + <field type="CARD16" name="name_len" /> + <pad bytes="2" /> + <list type="char" name="name"> + <fieldref>name_len</fieldref> + </list> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="server_major" /> + <field type="CARD16" name="server_minor" /> + <field type="BOOL" name="present" /> + <pad bytes="19" /> + </reply> + </request> + + <!-- ListInputDevices --> + + <enum name="DeviceUse"> + <item name="IsXPointer"><value>0</value></item> + <item name="IsXKeyboard"><value>1</value></item> + <item name="IsXExtensionDevice"><value>2</value></item> + <item name="IsXExtensionKeyboard"><value>3</value></item> + <item name="IsXExtensionPointer"><value>4</value></item> + </enum> + + <struct name="DeviceInfo"> + <field type="ATOM" name="device_type" /> + <field type="CARD8" name="device_id" /> + <field type="CARD8" name="num_class_info" /> + <field type="CARD8" name="device_use" enum="DeviceUse" /> + <pad bytes="1" /> + </struct> + + <request name="ListInputDevices" opcode="2"> + <reply> + <pad bytes="1" /> + <field type="CARD8" name="devices_len" /> + <pad bytes="23" /> + <list type="DeviceInfo" name="devices"> + <fieldref>devices_len</fieldref> + </list> + <!-- Uninterpreted: list of deviceinfo structs of 3 the subtypes --> + <!-- Uninterpreted: list of null-terminated strings --> + </reply> + </request> + + <enum name="InputClass"> + <item name="Key"><value>0</value></item> + <item name="Button"><value>1</value></item> + <item name="Valuator"><value>2</value></item> + <item name="Feedback"><value>3</value></item> + <item name="Proximity"><value>4</value></item> + <item name="Focus"><value>5</value></item> + <item name="Other"><value>6</value></item> + </enum> + + <struct name="InputInfo"> + <field type="CARD8" name="class_id" enum="InputClass" /> + <field type="CARD8" name="len" /> + </struct> + + <struct name="KeyInfo"> + <field type="CARD8" name="class_id" enum="InputClass" /> + <field type="CARD8" name="len" /> + <field type="KeyCode" name="min_keycode" /> + <field type="KeyCode" name="max_keycode" /> + <field type="CARD16" name="num_keys" /> + <pad bytes="2" /> + </struct> + + <struct name="ButtonInfo"> + <field type="CARD8" name="class_id" enum="InputClass" /> + <field type="CARD8" name="len" /> + <field type="CARD16" name="num_buttons" /> + </struct> + + <struct name="AxisInfo"> + <field type="CARD32" name="resolution" /> + <field type="INT32" name="minimum" /> + <field type="INT32" name="maximum" /> + </struct> + + <struct name="ValuatorInfo"> + <field type="CARD8" name="class_id" enum="InputClass" /> + <field type="CARD8" name="len" /> + <field type="CARD8" name="axes_len" /> + <field type="CARD8" name="mode" enum="ValuatorMode" /> + <field type="CARD32" name="motion_size" /> + <list type="AxisInfo" name="axes"> + <fieldref>axes_len</fieldref> + </list> + </struct> + + <!-- OpenDevice --> + + <struct name="InputClassInfo"> + <field type="CARD8" name="class_id" enum="InputClass" /> + <field type="CARD8" name="event_type_base" /> + </struct> + + <request name="OpenDevice" opcode="3"> + <field type="CARD8" name="device_id" /> + <pad bytes="3" /> + <reply> + <pad bytes="1" /> + <field type="CARD8" name="num_classes" /> + <pad bytes="23" /> + <list type="InputClassInfo" name="class_info"> + <fieldref>num_classes</fieldref> + </list> + </reply> + </request> + + <!-- CloseDevice --> + + <request name="CloseDevice" opcode="4"> + <field type="CARD8" name="device_id" /> + <pad bytes="3" /> + </request> + + <!-- SetDeviceMode --> + + <request name="SetDeviceMode" opcode="5"> + <field type="CARD8" name="device_id" /> + <field type="CARD8" name="mode" enum="ValuatorMode" /> + <pad bytes="2" /> + <reply> + <pad bytes="1" /> + <field type="CARD8" name="status" altenum="GrabStatus" /> + <pad bytes="23" /> + </reply> + </request> + + <!-- SelectExtensionEvent --> + + <request name="SelectExtensionEvent" opcode="6"> + <field type="WINDOW" name="window" /> + <field type="CARD16" name="num_classes" /> + <pad bytes="2" /> + <list type="EventClass" name="classes"> + <fieldref>num_classes</fieldref> + </list> + </request> + + <!-- GetSelectedExtensionEvents --> + + <request name="GetSelectedExtensionEvents" opcode="7"> + <field type="WINDOW" name="window" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="num_this_classes" /> + <field type="CARD16" name="num_all_classes" /> + <pad bytes="20" /> + <list type="EventClass" name="this_classes"> + <fieldref>num_this_classes</fieldref> + </list> + <list type="EventClass" name="all_classes"> + <fieldref>num_all_classes</fieldref> + </list> + </reply> + </request> + + <!-- ChangeDeviceDontPropagateList --> + + <request name="ChangeDeviceDontPropagateList" opcode="8"> + <field type="WINDOW" name="window" /> + <field type="CARD16" name="num_classes" /> + <field type="CARD8" name="mode" enum="PropagateMode" /> + <pad bytes="1" /> + <list type="EventClass" name="classes"> + <fieldref>num_classes</fieldref> + </list> + </request> + + <!-- GetDeviceDontPropagateList --> + + <request name="GetDeviceDontPropagateList" opcode="9"> + <field type="WINDOW" name="window" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="num_classes" /> + <pad bytes="22" /> + <list type="EventClass" name="classes"> + <fieldref>num_classes</fieldref> + </list> + </reply> + </request> + + <!-- GetDeviceMotionEvents --> + + <request name="GetDeviceMotionEvents" opcode="10"> + <field type="TIMESTAMP" name="start" /> + <field type="TIMESTAMP" name="stop" altenum="Time" /> + <field type="CARD8" name="device_id" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="num_coords" /> + <field type="CARD8" name="num_axes" /> + <field type="CARD8" name="device_mode" enum="ValuatorMode" /> + <pad bytes="18" /> + <!-- Uninterpreted: list of DeviceTimeCoord structures --> + </reply> + </request> + + <struct name="DeviceTimeCoord"> + <field type="TIMESTAMP" name="time" /> + <!-- Uninterpreted: list of CARD16 --> + </struct> + + <!-- ChangeKeyboardDevice --> + <request name="ChangeKeyboardDevice" opcode="11"> + <field type="CARD8" name="device_id" /> + <pad bytes="3" /> + <reply> + <pad bytes="1" /> + <field type="CARD8" name="status" altenum="GrabStatus" /> + <pad bytes="23" /> + </reply> + </request> + + <!-- ChangePointerDevice --> + + <request name="ChangePointerDevice" opcode="12"> + <field type="CARD8" name="x_axis" /> + <field type="CARD8" name="y_axis" /> + <field type="CARD8" name="device_id" /> + <pad bytes="1" /> + <reply> + <pad bytes="1" /> + <field type="CARD8" name="status" altenum="GrabStatus" /> + <pad bytes="23" /> + </reply> + </request> + + <!-- GrabDevice --> + + <request name="GrabDevice" opcode="13"> + <field type="WINDOW" name="grab_window" /> + <field type="TIMESTAMP" name="time" altenum="Time" /> + <field type="CARD16" name="num_classes" /> + <field type="CARD8" name="this_device_mode" enum="GrabMode" /> + <field type="CARD8" name="other_device_mode" enum="GrabMode" /> + <field type="BOOL" name="owner_events" /> + <field type="CARD8" name="device_id" /> + <pad bytes="2" /> + <list type="EventClass" name="classes"> + <fieldref>num_classes</fieldref> + </list> + <reply> + <pad bytes="1" /> + <field type="CARD8" name="status" enum="GrabStatus" /> + <pad bytes="23" /> + </reply> + </request> + + <!-- UngrabDevice --> + + <request name="UngrabDevice" opcode="14"> + <field type="TIMESTAMP" name="time" altenum="Time" /> + <field type="CARD8" name="device_id" /> + </request> + + <!-- GrabDeviceKey --> + + <request name="GrabDeviceKey" opcode="15"> + <field type="WINDOW" name="grab_window" /> + <field type="CARD16" name="num_classes" /> + <field type="CARD16" name="modifiers" mask="ModMask" /> + <field type="CARD8" name="modifier_device" /> + <field type="CARD8" name="grabbed_device" /> + <field type="CARD8" name="key" altenum="Grab" /> + <field type="CARD8" name="this_device_mode" enum="GrabMode" /> + <field type="CARD8" name="other_device_mode" enum="GrabMode" /> + <field type="BOOL" name="owner_events" /> + <pad bytes="2" /> + <list type="EventClass" name="classes"> + <fieldref>num_classes</fieldref> + </list> + </request> + + <!-- UngrabDeviceKey --> + + <request name="UngrabDeviceKey" opcode="16"> + <field type="WINDOW" name="grabWindow" /> + <field type="CARD16" name="modifiers" mask="ModMask" /> + <field type="CARD8" name="modifier_device" /> + <field type="CARD8" name="key" altenum="Grab" /> + <field type="CARD8" name="grabbed_device" /> + </request> + + <!-- GrabDeviceButton --> + + <request name="GrabDeviceButton" opcode="17"> + <field type="WINDOW" name="grab_window" /> + <field type="CARD8" name="grabbed_device" /> + <field type="CARD8" name="modifier_device" /> + <field type="CARD16" name="num_classes" /> + <field type="CARD16" name="modifiers" mask="ModMask" /> + <field type="CARD8" name="this_device_mode" enum="GrabMode" /> + <field type="CARD8" name="other_device_mode" enum="GrabMode" /> + <field type="CARD8" name="button" altenum="Grab" /> + <field type="CARD8" name="owner_events" /> + <pad bytes="2" /> + <list type="EventClass" name="classes"> + <fieldref>num_classes</fieldref> + </list> + </request> + + <!-- UngrabDeviceButton --> + + <request name="UngrabDeviceButton" opcode="18"> + <field type="WINDOW" name="grab_window" /> + <field type="CARD16" name="modifiers" mask="ModMask" /> + <field type="CARD8" name="modifier_device" /> + <field type="CARD8" name="button" altenum="Grab" /> + <field type="CARD8" name="grabbed_device" /> + </request> + + <!-- AllowDeviceEvents --> + + <enum name="DeviceInputMode"> + <item name="AsyncThisDevice" /> + <item name="SyncThisDevice" /> + <item name="ReplayThisDevice" /> + <item name="AsyncOtherDevices" /> + <item name="AsyncAll" /> + <item name="SyncAll" /> + </enum> + + <request name="AllowDeviceEvents" opcode="19"> + <field type="TIMESTAMP" name="time" altenum="Time" /> + <field type="CARD8" name="mode" enum="DeviceInputMode" /> + <field type="CARD8" name="device_id" /> + </request> + + <!-- GetDeviceFocus --> + + <request name="GetDeviceFocus" opcode="20"> + <field type="CARD8" name="device_id" /> + <pad bytes="3" /> + <reply> + <pad bytes="1" /> + <field type="WINDOW" name="focus" altenum="InputFocus" /> + <field type="TIMESTAMP" name="time" /> + <field type="CARD8" name="revert_to" enum="InputFocus" /> + <pad bytes="15" /> + </reply> + </request> + + <!-- SetDeviceFocus --> + + <request name="SetDeviceFocus" opcode="21"> + <field type="WINDOW" name="focus" altenum="InputFocus" /> + <field type="TIMESTAMP" name="time" altenum="Time" /> + <field type="CARD8" name="revert_to" enum="InputFocus" /> + <field type="CARD8" name="device_id" /> + </request> + + <!-- GetFeedbackControl --> + + <request name="GetFeedbackControl" opcode="22"> + <field type="CARD8" name="device_id" /> + <pad bytes="3" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="num_feedback" /> + <pad bytes="22" /> + <!-- Uninterpreted: list of FeedbackState structures --> + </reply> + </request> + + <enum name="FeedbackClass"> + <item name="Keyboard" /> + <item name="Pointer" /> + <item name="String" /> + <item name="Integer" /> + <item name="Led" /> + <item name="Bell" /> + </enum> + + <struct name="FeedbackState"> + <field type="CARD8" name="class_id" enum="FeedbackClass" /> + <field type="CARD8" name="id" /> + <field type="CARD16" name="len" /> + </struct> + + <struct name="KbdFeedbackState"> + <field type="CARD8" name="class_id" enum="FeedbackClass" /> + <field type="CARD8" name="id" /> + <field type="CARD16" name="len" /> + <field type="CARD16" name="pitch" /> + <field type="CARD16" name="duration" /> + <field type="CARD32" name="led_mask" /> + <field type="CARD32" name="led_values" /> + <field type="BOOL" name="global_auto_repeat" /> + <field type="CARD8" name="click" /> + <field type="CARD8" name="percent" /> + <pad bytes="1" /> + <list type="CARD8" name="auto_repeats"><value>32</value></list> + </struct> + + <struct name="PtrFeedbackState"> + <field type="CARD8" name="class_id" enum="FeedbackClass" /> + <field type="CARD8" name="id" /> + <field type="CARD16" name="len" /> + <pad bytes="2" /> + <field type="CARD16" name="accel_num" /> + <field type="CARD16" name="accel_denom" /> + <field type="CARD16" name="threshold" /> + </struct> + + <struct name="IntegerFeedbackState"> + <field type="CARD8" name="class_id" enum="FeedbackClass" /> + <field type="CARD8" name="id" /> + <field type="CARD16" name="len" /> + <field type="CARD32" name="resolution" /> + <field type="INT32" name="min_value" /> + <field type="INT32" name="max_value" /> + </struct> + + <struct name="StringFeedbackState"> + <field type="CARD8" name="class_id" enum="FeedbackClass" /> + <field type="CARD8" name="id" /> + <field type="CARD16" name="len" /> + <field type="CARD16" name="max_symbols" /> + <field type="CARD16" name="num_keysyms" /> + <list type="KEYSYM" name="keysyms"> + <fieldref>num_keysyms</fieldref> + </list> + </struct> + + <struct name="BellFeedbackState"> + <field type="CARD8" name="class_id" enum="FeedbackClass" /> + <field type="CARD8" name="id" /> + <field type="CARD16" name="len" /> + <field type="CARD8" name="percent" /> + <pad bytes="3" /> + <field type="CARD16" name="pitch" /> + <field type="CARD16" name="duration" /> + </struct> + + <struct name="LedFeedbackState"> + <field type="CARD8" name="class_id" enum="FeedbackClass" /> + <field type="CARD8" name="id" /> + <field type="CARD16" name="len" /> + <field type="CARD32" name="led_mask" /> + <field type="CARD32" name="led_values" /> + </struct> + + <!-- ChangeFeedbackControl + + <request name="ChangeFeedbackControl" opcode="23"> + <field type="CARD32" name="mask" /> + <field type="CARD8" name="device_id" /> + <field type="CARD8" name="feedback_id" /> + Uninterpreted: list of FeedbackCtl structures + </request> + + --> + + <struct name="FeedbackCtl"> + <field type="CARD8" name="class_id" enum="FeedbackClass" /> + <field type="CARD8" name="id" /> + <field type="CARD16" name="len" /> + </struct> + + <struct name="KbdFeedbackCtl"> + <field type="CARD8" name="class_id" enum="FeedbackClass" /> + <field type="CARD8" name="id" /> + <field type="CARD16" name="len" /> + <field type="KeyCode" name="key" /> + <field type="CARD8" name="auto_repeat_mode" /> + <field type="INT8" name="key_click_percent" /> + <field type="INT8" name="bell_percent" /> + <field type="INT16" name="bell_pitch" /> + <field type="INT16" name="bell_duration" /> + <field type="CARD32" name="led_mask" /> + <field type="CARD32" name="led_values" /> + </struct> + + <struct name="PtrFeedbackCtl"> + <field type="CARD8" name="class_id" enum="FeedbackClass" /> + <field type="CARD8" name="id" /> + <field type="CARD16" name="len" /> + <pad bytes="2" /> + <field type="INT16" name="num" /> + <field type="INT16" name="denom" /> + <field type="INT16" name="threshold" /> + </struct> + + <struct name="IntegerFeedbackCtl"> + <field type="CARD8" name="class_id" enum="FeedbackClass" /> + <field type="CARD8" name="id" /> + <field type="CARD16" name="len" /> + <field type="INT32" name="int_to_display" /> + </struct> + + <struct name="StringFeedbackCtl"> + <field type="CARD8" name="class_id" enum="FeedbackClass" /> + <field type="CARD8" name="id" /> + <field type="CARD16" name="len" /> + <pad bytes="2" /> + <field type="CARD16" name="num_keysyms" /> + <list type="KEYSYM" name="keysyms"> + <fieldref>num_keysyms</fieldref> + </list> + </struct> + + <struct name="BellFeedbackCtl"> + <field type="CARD8" name="class_id" enum="FeedbackClass" /> + <field type="CARD8" name="id" /> + <field type="CARD16" name="len" /> + <field type="INT8" name="percent" /> + <pad bytes="3" /> + <field type="INT16" name="pitch" /> + <field type="INT16" name="duration" /> + </struct> + + <struct name="LedFeedbackCtl"> + <field type="CARD8" name="class_id" enum="FeedbackClass" /> + <field type="CARD8" name="id" /> + <field type="CARD16" name="len" /> + <field type="CARD32" name="led_mask" /> + <field type="CARD32" name="led_values" /> + </struct> + + <!-- GetDeviceKeyMapping --> + + <request name="GetDeviceKeyMapping" opcode="24"> + <field type="CARD8" name="device_id" /> + <field type="KeyCode" name="first_keycode" /> + <field type="CARD8" name="count" /> + <reply> + <pad bytes="1" /> + <field type="CARD8" name="keysyms_per_keycode" /> + <pad bytes="23" /> + <list type="KEYSYM" name="keysyms"> + <fieldref>length</fieldref> + </list> + </reply> + </request> + + <!-- ChangeDeviceKeyMapping --> + + <request name="ChangeDeviceKeyMapping" opcode="25"> + <field type="CARD8" name="device_id" /> + <field type="KeyCode" name="first_keycode" /> + <field type="CARD8" name="keysyms_per_keycode" /> + <field type="CARD8" name="keycode_count" /> + <list type="KEYSYM" name="keysyms"> + <op op="*"> + <fieldref>keycode_count</fieldref> + <fieldref>keysyms_per_keycode</fieldref> + </op> + </list> + </request> + + <!-- GetDeviceModifierMapping --> + + <request name="GetDeviceModifierMapping" opcode="26"> + <field type="CARD8" name="device_id" /> + <pad bytes="3" /> + <reply> + <pad bytes="1" /> + <field type="CARD8" name="keycodes_per_modifier" /> + <pad bytes="23" /> + <list type="CARD8" name="keymaps"> + <op op="*"> + <fieldref>keycodes_per_modifier</fieldref> + <value>8</value> + </op> + </list> + </reply> + </request> + + <!-- SetDeviceModifierMapping --> + + <request name="SetDeviceModifierMapping" opcode="27"> + <field type="CARD8" name="device_id" /> + <field type="CARD8" name="keycodes_per_modifier" /> + <pad bytes="1" /> + <list type="CARD8" name="keymaps"> + <op op="*"> + <fieldref>keycodes_per_modifier</fieldref> + <value>8</value> + </op> + </list> + <reply> + <pad bytes="1" /> + <field type="CARD8" name="status" enum="MappingStatus" /> + <pad bytes="23" /> + </reply> + </request> + + <!-- GetDeviceButtonMapping --> + + <request name="GetDeviceButtonMapping" opcode="28"> + <field type="CARD8" name="device_id" /> + <pad bytes="3" /> + <reply> + <pad bytes="1" /> + <field type="CARD8" name="map_size" /> + <pad bytes="23" /> + <list type="CARD8" name="map"> + <fieldref>map_size</fieldref> + </list> + </reply> + </request> + + <!-- SetDeviceButtonMapping --> + + <request name="SetDeviceButtonMapping" opcode="29"> + <field type="CARD8" name="device_id" /> + <field type="CARD8" name="map_size" /> + <pad bytes="2" /> + <list type="CARD8" name="map"> + <fieldref>map_size</fieldref> + </list> + <reply> + <pad bytes="1" /> + <field type="CARD8" name="status" enum="MappingStatus" /> + <pad bytes="23" /> + </reply> + </request> + + <!-- QueryDeviceState --> + + <request name="QueryDeviceState" opcode="30"> + <field type="CARD8" name="device_id" /> + <pad bytes="3" /> + <reply> + <pad bytes="1" /> + <field type="CARD8" name="num_classes" /> + <pad bytes="23" /> + <!-- Uninterpreted: list of InputState structures --> + </reply> + </request> + + <struct name="InputState"> + <field type="CARD8" name="class_id" enum="InputClass" /> + <field type="CARD8" name="len" /> + <field type="CARD8" name="num_items" /> + </struct> + + <struct name="KeyState"> + <field type="CARD8" name="class_id" enum="InputClass" /> + <field type="CARD8" name="len" /> + <field type="CARD8" name="num_keys" /> + <pad bytes="1" /> + <list type="CARD8" name="keys"> + <value>32</value> + </list> + </struct> + + <struct name="ButtonState"> + <field type="CARD8" name="class_id" enum="InputClass" /> + <field type="CARD8" name="len" /> + <field type="CARD8" name="num_buttons" /> + <pad bytes="1" /> + <list type="CARD8" name="buttons"> + <value>32</value> + </list> + </struct> + + <struct name="ValuatorState"> + <field type="CARD8" name="class_id" enum="InputClass" /> + <field type="CARD8" name="len" /> + <field type="CARD8" name="num_valuators" /> + <field type="CARD8" name="mode" /> + <list type="CARD32" name="valuators"> + <fieldref>num_valuators</fieldref> + </list> + </struct> + + <!-- SendExtensionEvent --> + + <request name="SendExtensionEvent" opcode="31"> + <field type="WINDOW" name="destination" /> + <field type="CARD8" name="device_id" /> + <field type="BOOL" name="propagate" /> + <field type="CARD16" name="num_classes" /> + <field type="CARD8" name="num_events" /> + <pad bytes="3" /> + <list type="char" name="events"> + <op op="*"> + <fieldref>num_events</fieldref> + <value>32</value> + </op> + </list> + <list type="EventClass" name="classes"> + <fieldref>num_classes</fieldref> + </list> + </request> + + <!-- DeviceBell --> + + <request name="DeviceBell" opcode="32"> + <field type="CARD8" name="device_id" /> + <field type="CARD8" name="feedback_id" /> + <field type="CARD8" name="feedback_class" /> + <field type="INT8" name="percent" /> + </request> + + <!-- SetDeviceValuators --> + + <request name="SetDeviceValuators" opcode="33"> + <field type="CARD8" name="device_id" /> + <field type="CARD8" name="first_valuator" /> + <field type="CARD8" name="num_valuators" /> + <pad bytes="1" /> + <list type="INT32" name="valuators"> + <fieldref>num_valuators</fieldref> + </list> + <reply> + <pad bytes="1" /> + <field type="CARD8" name="status" enum="GrabStatus" /> + <pad bytes="23" /> + </reply> + </request> + + <!-- GetDeviceControl --> + + <request name="GetDeviceControl" opcode="34"> + <field type="CARD16" name="control_id" /> + <field type="CARD8" name="device_id" /> + <pad bytes="1" /> + <reply> + <pad bytes="1" /> + <field type="CARD8" name="status" altenum="GrabStatus" /> + <pad bytes="23" /> + <!-- Uninterpreted: list of DeviceState structures --> + </reply> + </request> + + <struct name="DeviceState"> + <field type="CARD16" name="control_id" /> + <field type="CARD16" name="len" /> + </struct> + + <struct name="DeviceResolutionState"> + <field type="CARD16" name="control_id" /> + <field type="CARD16" name="len" /> + <field type="CARD32" name="num_valuators" /> + <list type="CARD32" name="resolution_values"> + <fieldref>num_valuators</fieldref> + </list> + <list type="CARD32" name="resolution_min"> + <fieldref>num_valuators</fieldref> + </list> + <list type="CARD32" name="resolution_max"> + <fieldref>num_valuators</fieldref> + </list> + </struct> + + <struct name="DeviceAbsCalibState"> + <field type="CARD16" name="control_id" /> + <field type="CARD16" name="len" /> + <field type="INT32" name="min_x" /> + <field type="INT32" name="max_x" /> + <field type="INT32" name="min_y" /> + <field type="INT32" name="max_y" /> + <field type="CARD32" name="flip_x" /> + <field type="CARD32" name="flip_y" /> + <field type="CARD32" name="rotation" /> + <field type="CARD32" name="button_threshold" /> + </struct> + + <struct name="DeviceAbsAreaState"> + <field type="CARD16" name="control_id" /> + <field type="CARD16" name="len" /> + <field type="CARD32" name="offset_x" /> + <field type="CARD32" name="offset_y" /> + <field type="CARD32" name="width" /> + <field type="CARD32" name="height" /> + <field type="CARD32" name="screen" /> + <field type="CARD32" name="following" /> + </struct> + + <struct name="DeviceCoreState"> + <field type="CARD16" name="control_id" /> + <field type="CARD16" name="len" /> + <field type="CARD8" name="status" /> + <field type="CARD8" name="iscore" /> + <pad bytes="2" /> + </struct> + + <struct name="DeviceEnableState"> + <field type="CARD16" name="control_id" /> + <field type="CARD16" name="len" /> + <field type="CARD8" name="enable" /> + <pad bytes="3" /> + </struct> + + <!-- ChangeDeviceControl + + <request name="ChangeDeviceControl" opcode="35"> + <field type="CARD16" name="control_id" /> + <field type="CARD8" name="device_id" /> + <pad bytes="1" /> + Uninterpreted: list of DeviceCtl structures + <reply> + <pad byte="1" /> + <field type="CARD8" name="status" altenum="GrabStatus" /> + <pad bytes="23" /> + </reply> + </request> + + --> + + <struct name="DeviceCtl"> + <field type="CARD16" name="control_id" /> + <field type="CARD16" name="len" /> + </struct> + + <struct name="DeviceResolutionCtl"> + <field type="CARD16" name="control_id" /> + <field type="CARD16" name="len" /> + <field type="CARD8" name="first_valuator" /> + <field type="CARD8" name="num_valuators" /> + <list type="CARD32" name="resolution_values"> + <fieldref>num_valuators</fieldref> + </list> + </struct> + + <struct name="DeviceAbsCalibCtl"> + <field type="CARD16" name="control_id" /> + <field type="CARD16" name="len" /> + <field type="INT32" name="min_x" /> + <field type="INT32" name="max_x" /> + <field type="INT32" name="min_y" /> + <field type="INT32" name="max_y" /> + <field type="CARD32" name="flip_x" /> + <field type="CARD32" name="flip_y" /> + <field type="CARD32" name="rotation" /> + <field type="CARD32" name="button_threshold" /> + </struct> + + <struct name="DeviceAbsAreaCtrl"> + <field type="CARD16" name="control_id" /> + <field type="CARD16" name="len" /> + <field type="CARD32" name="offset_x" /> + <field type="CARD32" name="offset_y" /> + <field type="INT32" name="width" /> + <field type="INT32" name="height" /> + <field type="INT32" name="screen" /> + <field type="CARD32" name="following" /> + </struct> + + <struct name="DeviceCoreCtrl"> + <field type="CARD16" name="control_id" /> + <field type="CARD16" name="len" /> + <field type="CARD8" name="status" /> + <pad bytes="3" /> + </struct> + + <struct name="DeviceEnableCtrl"> + <field type="CARD16" name="control_id" /> + <field type="CARD16" name="len" /> + <field type="CARD8" name="enable" /> + <pad bytes="3" /> + </struct> + + <!-- EVENTS --> + + <event name="DeviceValuator" number="0"> + <field type="CARD8" name="device_id" /> + <field type="CARD16" name="device_state" /> + <field type="CARD8" name="num_valuators" /> + <field type="CARD8" name="first_valuator" /> + <list type="INT32" name="valuators"><value>6</value></list> + </event> + + <event name="DeviceKeyPress" number="1"> + <field type="BYTE" name="detail" /> + <field type="TIMESTAMP" name="time" /> + <field type="WINDOW" name="root" /> + <field type="WINDOW" name="event" /> + <field type="WINDOW" name="child" altenum="Window" /> + <field type="INT16" name="root_x" /> + <field type="INT16" name="root_y" /> + <field type="INT16" name="event_x" /> + <field type="INT16" name="event_y" /> + <field type="CARD16" name="state" /> + <field type="BOOL" name="same_screen" /> + <field type="CARD8" name="device_id" /> + </event> + + <eventcopy name="DeviceKeyRelease" number="2" ref="DeviceKeyPress" /> + <eventcopy name="DeviceButtonPress" number="3" ref="DeviceKeyPress" /> + <eventcopy name="DeviceButtonRelease" number="4" ref="DeviceKeyPress" /> + <eventcopy name="DeviceMotionNotify" number="5" ref="DeviceKeyPress" /> + <eventcopy name="ProximityIn" number="8" ref="DeviceKeyPress" /> + <eventcopy name="ProximityOut" number="9" ref="DeviceKeyPress" /> + + <event name="FocusIn" number="6"> + <field type="BYTE" name="detail" enum="NotifyDetail" /> + <field type="TIMESTAMP" name="time" /> + <field type="WINDOW" name="window" /> + <field type="BYTE" name="mode" enum="NotifyMode" /> + <field type="CARD8" name="device_id" /> + <pad bytes="18" /> + </event> + + <eventcopy name="FocusOut" number="7" ref="FocusIn" /> + + <event name="DeviceStateNotify" number="10"> + <field type="BYTE" name="device_id" /> + <field type="TIMESTAMP" name="time" /> + <field type="CARD8" name="num_keys" /> + <field type="CARD8" name="num_buttons" /> + <field type="CARD8" name="num_valuators" /> + <field type="CARD8" name="classes_reported" /> + <list type="CARD8" name="buttons"> + <value>4</value> + </list> + <list type="CARD8" name="keys"> + <value>4</value> + </list> + <list type="CARD32" name="valuators"> + <value>3</value> + </list> + </event> + + <event name="DeviceMappingNotify" number="11"> + <field type="BYTE" name="device_id" /> + <field type="CARD8" name="request" /> + <field type="KeyCode" name="first_keycode" /> + <field type="CARD8" name="count" /> + <pad bytes="1" /> + <field type="TIMESTAMP" name="time" /> + <pad bytes="20" /> + </event> + + <event name="ChangeDeviceNotify" number="12"> + <field type="BYTE" name="device_id" /> + <field type="TIMESTAMP" name="time" /> + <field type="CARD8" name="request" /> + <pad bytes="23" /> + </event> + + <event name="DeviceKeyStateNotify" number="13"> + <field type="BYTE" name="device_id" /> + <list type="CARD8" name="keys"> + <value>28</value> + </list> + </event> + + <event name="DeviceButtonStateNotify" number="14"> + <field type="BYTE" name="device_id" /> + <list type="CARD8" name="buttons"> + <value>28</value> + </list> + </event> + + <event name="DevicePresenceNotify" number="15"> + <pad bytes="1" /> + <field type="TIMESTAMP" name="time" /> + <field type="BYTE" name="devchange" /> + <field type="BYTE" name="device_id" /> + <field type="CARD16" name="control" /> + <pad bytes="20" /> + </event> + + <!-- ERRORS --> + <error name="Device" number="0" /> + <error name="Event" number="1" /> + <error name="Mode" number="2" /> + <error name="DeviceBusy" number="3" /> + <error name="Class" number="4" /> + +</xcb> diff --git a/libxcb/xcb-proto/src/xprint.xml b/libxcb/xcb-proto/src/xprint.xml index 4107e96e5..ffd8df1ea 100644 --- a/libxcb/xcb-proto/src/xprint.xml +++ b/libxcb/xcb-proto/src/xprint.xml @@ -1,329 +1,329 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2005 Jeremy Kolb.
-All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person ob/Sintaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-
-<xcb header="xprint" extension-xname="XpExtension" extension-name="XPrint"
- extension-multiword="true" major-version="1" minor-version="0">
-
- <!-- Conforms to XPRINT 1.0 -->
-
- <import>xproto</import>
-
- <typedef oldname="char" newname="STRING8" />
-
- <!-- Types -->
- <struct name="PRINTER">
- <field type="CARD32" name="nameLen" />
- <list type="STRING8" name="name">
- <fieldref>nameLen</fieldref>
- </list>
- <!-- Padding -->
- <field type="CARD32" name="descLen" />
- <list type="STRING8" name="description">
- <fieldref>descLen</fieldref>
- </list>
- <!-- More padding -->
- </struct>
-
- <!--<typedef oldname="CARD32" newname="PCONTEXT" />-->
- <xidtype name="PCONTEXT" />
-
- <!-- "PrintGetDocumentData" -->
- <enum name="GetDoc">
- <item name="Finished"><value>0</value></item>
- <item name="SecondConsumer"><value>1</value></item>
- </enum>
-
- <!-- Event Mask ("PrintSelectInput") -->
- <enum name="EvMask">
- <item name="NoEventMask"><value>0</value></item>
- <item name="PrintMask"><bit>0</bit></item>
- <item name="AttributeMask"><bit>1</bit></item>
- </enum>
-
- <!-- "PrintNotify" detail -->
- <enum name="Detail">
- <item name="StartJobNotify"><value>1</value></item>
- <item name="EndJobNotify"><value>2</value></item>
- <item name="StartDocNotify"><value>3</value></item>
- <item name="EndDocNotify"><value>4</value></item>
- <item name="StartPageNotify"><value>5</value></item>
- <item name="EndPageNotify"><value>6</value></item>
- </enum>
-
- <!-- "AttributeNotify" detail -->
- <enum name="Attr">
- <item name="JobAttr"><value>1</value></item>
- <item name="DocAttr"><value>2</value></item>
- <item name="PageAttr"><value>3</value></item>
- <item name="PrinterAttr"><value>4</value></item>
- <item name="ServerAttr"><value>5</value></item>
- <item name="MediumAttr"><value>6</value></item>
- <item name="SpoolerAttr"><value>7</value></item>
- </enum>
-
-
- <!-- Requests -->
- <request name="PrintQueryVersion" opcode="0">
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="major_version" />
- <field type="CARD16" name="minor_version" />
- </reply>
- </request>
-
- <request name="PrintGetPrinterList" opcode="1">
- <field type="CARD32" name="printerNameLen" />
- <field type="CARD32" name="localeLen" />
- <list type="STRING8" name="printer_name">
- <fieldref>printerNameLen</fieldref>
- </list>
- <!-- There's some padding in here... -->
- <list type="STRING8" name="locale">
- <fieldref>localeLen</fieldref>
- </list>
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="listCount" />
- <pad bytes="20" />
- <list type="PRINTER" name="printers">
- <fieldref>listCount</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="PrintRehashPrinterList" opcode="20" />
-
- <request name="CreateContext" opcode="2">
- <field type="CARD32" name="context_id" />
- <field type="CARD32" name="printerNameLen" />
- <field type="CARD32" name="localeLen" />
- <list type="STRING8" name="printerName">
- <fieldref>printerNameLen</fieldref>
- </list>
- <!-- padding -->
- <list type="STRING8" name="locale">
- <fieldref>localeLen</fieldref>
- </list>
- </request>
-
- <request name="PrintSetContext" opcode="3">
- <field type="CARD32" name="context" />
- </request>
-
- <request name="PrintGetContext" opcode="4">
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="context" />
- </reply>
- </request>
-
- <request name="PrintDestroyContext" opcode="5">
- <field type="CARD32" name="context" />
- </request>
-
- <request name="PrintGetScreenOfContext" opcode="6">
- <reply>
- <pad bytes="1" />
- <field type="WINDOW" name="root" />
- </reply>
- </request>
-
- <request name="PrintStartJob" opcode="7">
- <field type="CARD8" name="output_mode"/>
- </request>
-
- <request name="PrintEndJob" opcode="8">
- <field type="BOOL" name="cancel" />
- </request>
-
- <request name="PrintStartDoc" opcode="9">
- <field type="CARD8" name="driver_mode" />
- </request>
-
- <request name="PrintEndDoc" opcode="10">
- <field type="BOOL" name="cancel" />
- </request>
-
- <request name="PrintPutDocumentData" opcode="11">
- <field type="DRAWABLE" name="drawable" />
- <field type="CARD32" name="len_data" />
- <field type="CARD16" name="len_fmt" />
- <field type="CARD16" name="len_options" />
- <list type="BYTE" name="data">
- <fieldref>len_data</fieldref>
- </list>
- <!-- padding -->
- <list type="STRING8" name="doc_format" />
- <!-- padding -->
- <list type="STRING8" name="options" />
- </request>
-
- <request name="PrintGetDocumentData" opcode="12">
- <field type="PCONTEXT" name="context" />
- <field type="CARD32" name="max_bytes" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="status_code" />
- <field type="CARD32" name="finished_flag" />
- <field type="CARD32" name="dataLen" />
- <pad bytes="12" />
- <list type="BYTE" name="data">
- <fieldref>dataLen</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="PrintStartPage" opcode="13">
- <field type="WINDOW" name="window" />
- </request>
-
- <request name="PrintEndPage" opcode="14">
- <field type="BOOL" name="cancel" />
- <pad bytes="3" />
- </request>
-
- <request name="PrintSelectInput" opcode="15">
- <field type="PCONTEXT" name="context" />
- <valueparam value-mask-type="CARD32"
- value-mask-name="event_mask"
- value-list-name="event_list" />
- </request>
-
- <request name="PrintInputSelected" opcode="16">
- <field type="PCONTEXT" name="context" />
- <reply>
- <pad bytes="1" />
- <valueparam value-mask-type="CARD32"
- value-mask-name="event_mask"
- value-list-name="event_list" />
- <valueparam value-mask-type="CARD32"
- value-mask-name="all_events_mask"
- value-list-name="all_events_list" />
- </reply>
- </request>
-
- <request name="PrintGetAttributes" opcode="17">
- <field type="PCONTEXT" name="context" />
- <field type="CARD8" name="pool" />
- <pad bytes="3" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="stringLen" />
- <pad bytes="20" />
- <field type="STRING8" name="attributes" />
- </reply>
- </request>
-
- <request name="PrintGetOneAttributes" opcode="19">
- <field type="PCONTEXT" name="context" />
- <field type="CARD32" name="nameLen" />
- <field type="CARD8" name="pool" />
- <pad bytes="3" />
- <list type="STRING8" name="name">
- <fieldref>nameLen</fieldref>
- </list>
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="valueLen" />
- <pad bytes="20" />
- <list type="STRING8" name="value">
- <fieldref>valueLen</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="PrintSetAttributes" opcode="18">
- <field type="PCONTEXT" name="context" />
- <field type="CARD32" name="stringLen" />
- <field type="CARD8" name="pool" />
- <field type="CARD8" name="rule" />
- <pad bytes="2" />
- <list type="STRING8" name="attributes" />
- </request>
-
- <request name="PrintGetPageDimensions" opcode="21">
- <field type="PCONTEXT" name="context" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- <field type="CARD16" name="offset_x" />
- <field type="CARD16" name="offset_y" />
- <field type="CARD16" name="reproducible_width" />
- <field type="CARD16" name="reproducible_height" />
- </reply>
- </request>
-
- <request name="PrintQueryScreens" opcode="22">
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="listCount" />
- <pad bytes="20" />
- <list type="WINDOW" name="roots">
- <fieldref>listCount</fieldref>
- </list>
- <!-- There may be a WINDOW rootWindow here... -->
- </reply>
- </request>
-
- <request name="PrintSetImageResolution" opcode="23">
- <field type="PCONTEXT" name="context" />
- <field type="CARD16" name="image_resolution" />
- <reply>
- <field type="BOOL" name="status" />
- <field type="CARD16" name="previous_resolutions" />
- </reply>
- </request>
-
- <request name="PrintGetImageResolution" opcode="24">
- <field type="PCONTEXT" name="context" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="image_resolution" />
- </reply>
- </request>
-
-
- <!-- Events -->
- <event name="Notify" number="0">
- <field type="CARD8" name="detail" />
- <field type="PCONTEXT" name="context" />
- <field type="BOOL" name="cancel" />
- </event>
-
- <event name="AttributNotify" number="1">
- <field type="CARD8" name="detail" />
- <field type="PCONTEXT" name="context" />
- </event>
-
- <!-- Errors -->
- <error name="BadContext" number="0" />
- <error name="BadSequence" number="1" />
-
-</xcb>
-
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2005 Jeremy Kolb. +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person ob/Sintaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> + +<xcb header="xprint" extension-xname="XpExtension" extension-name="XPrint" + extension-multiword="true" major-version="1" minor-version="0"> + + <!-- Conforms to XPRINT 1.0 --> + + <import>xproto</import> + + <typedef oldname="char" newname="STRING8" /> + + <!-- Types --> + <struct name="PRINTER"> + <field type="CARD32" name="nameLen" /> + <list type="STRING8" name="name"> + <fieldref>nameLen</fieldref> + </list> + <!-- Padding --> + <field type="CARD32" name="descLen" /> + <list type="STRING8" name="description"> + <fieldref>descLen</fieldref> + </list> + <!-- More padding --> + </struct> + + <!--<typedef oldname="CARD32" newname="PCONTEXT" />--> + <xidtype name="PCONTEXT" /> + + <!-- "PrintGetDocumentData" --> + <enum name="GetDoc"> + <item name="Finished"><value>0</value></item> + <item name="SecondConsumer"><value>1</value></item> + </enum> + + <!-- Event Mask ("PrintSelectInput") --> + <enum name="EvMask"> + <item name="NoEventMask"><value>0</value></item> + <item name="PrintMask"><bit>0</bit></item> + <item name="AttributeMask"><bit>1</bit></item> + </enum> + + <!-- "PrintNotify" detail --> + <enum name="Detail"> + <item name="StartJobNotify"><value>1</value></item> + <item name="EndJobNotify"><value>2</value></item> + <item name="StartDocNotify"><value>3</value></item> + <item name="EndDocNotify"><value>4</value></item> + <item name="StartPageNotify"><value>5</value></item> + <item name="EndPageNotify"><value>6</value></item> + </enum> + + <!-- "AttributeNotify" detail --> + <enum name="Attr"> + <item name="JobAttr"><value>1</value></item> + <item name="DocAttr"><value>2</value></item> + <item name="PageAttr"><value>3</value></item> + <item name="PrinterAttr"><value>4</value></item> + <item name="ServerAttr"><value>5</value></item> + <item name="MediumAttr"><value>6</value></item> + <item name="SpoolerAttr"><value>7</value></item> + </enum> + + + <!-- Requests --> + <request name="PrintQueryVersion" opcode="0"> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="major_version" /> + <field type="CARD16" name="minor_version" /> + </reply> + </request> + + <request name="PrintGetPrinterList" opcode="1"> + <field type="CARD32" name="printerNameLen" /> + <field type="CARD32" name="localeLen" /> + <list type="STRING8" name="printer_name"> + <fieldref>printerNameLen</fieldref> + </list> + <!-- There's some padding in here... --> + <list type="STRING8" name="locale"> + <fieldref>localeLen</fieldref> + </list> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="listCount" /> + <pad bytes="20" /> + <list type="PRINTER" name="printers"> + <fieldref>listCount</fieldref> + </list> + </reply> + </request> + + <request name="PrintRehashPrinterList" opcode="20" /> + + <request name="CreateContext" opcode="2"> + <field type="CARD32" name="context_id" /> + <field type="CARD32" name="printerNameLen" /> + <field type="CARD32" name="localeLen" /> + <list type="STRING8" name="printerName"> + <fieldref>printerNameLen</fieldref> + </list> + <!-- padding --> + <list type="STRING8" name="locale"> + <fieldref>localeLen</fieldref> + </list> + </request> + + <request name="PrintSetContext" opcode="3"> + <field type="CARD32" name="context" /> + </request> + + <request name="PrintGetContext" opcode="4"> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="context" /> + </reply> + </request> + + <request name="PrintDestroyContext" opcode="5"> + <field type="CARD32" name="context" /> + </request> + + <request name="PrintGetScreenOfContext" opcode="6"> + <reply> + <pad bytes="1" /> + <field type="WINDOW" name="root" /> + </reply> + </request> + + <request name="PrintStartJob" opcode="7"> + <field type="CARD8" name="output_mode"/> + </request> + + <request name="PrintEndJob" opcode="8"> + <field type="BOOL" name="cancel" /> + </request> + + <request name="PrintStartDoc" opcode="9"> + <field type="CARD8" name="driver_mode" /> + </request> + + <request name="PrintEndDoc" opcode="10"> + <field type="BOOL" name="cancel" /> + </request> + + <request name="PrintPutDocumentData" opcode="11"> + <field type="DRAWABLE" name="drawable" /> + <field type="CARD32" name="len_data" /> + <field type="CARD16" name="len_fmt" /> + <field type="CARD16" name="len_options" /> + <list type="BYTE" name="data"> + <fieldref>len_data</fieldref> + </list> + <!-- padding --> + <list type="STRING8" name="doc_format" /> + <!-- padding --> + <list type="STRING8" name="options" /> + </request> + + <request name="PrintGetDocumentData" opcode="12"> + <field type="PCONTEXT" name="context" /> + <field type="CARD32" name="max_bytes" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="status_code" /> + <field type="CARD32" name="finished_flag" /> + <field type="CARD32" name="dataLen" /> + <pad bytes="12" /> + <list type="BYTE" name="data"> + <fieldref>dataLen</fieldref> + </list> + </reply> + </request> + + <request name="PrintStartPage" opcode="13"> + <field type="WINDOW" name="window" /> + </request> + + <request name="PrintEndPage" opcode="14"> + <field type="BOOL" name="cancel" /> + <pad bytes="3" /> + </request> + + <request name="PrintSelectInput" opcode="15"> + <field type="PCONTEXT" name="context" /> + <valueparam value-mask-type="CARD32" + value-mask-name="event_mask" + value-list-name="event_list" /> + </request> + + <request name="PrintInputSelected" opcode="16"> + <field type="PCONTEXT" name="context" /> + <reply> + <pad bytes="1" /> + <valueparam value-mask-type="CARD32" + value-mask-name="event_mask" + value-list-name="event_list" /> + <valueparam value-mask-type="CARD32" + value-mask-name="all_events_mask" + value-list-name="all_events_list" /> + </reply> + </request> + + <request name="PrintGetAttributes" opcode="17"> + <field type="PCONTEXT" name="context" /> + <field type="CARD8" name="pool" /> + <pad bytes="3" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="stringLen" /> + <pad bytes="20" /> + <field type="STRING8" name="attributes" /> + </reply> + </request> + + <request name="PrintGetOneAttributes" opcode="19"> + <field type="PCONTEXT" name="context" /> + <field type="CARD32" name="nameLen" /> + <field type="CARD8" name="pool" /> + <pad bytes="3" /> + <list type="STRING8" name="name"> + <fieldref>nameLen</fieldref> + </list> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="valueLen" /> + <pad bytes="20" /> + <list type="STRING8" name="value"> + <fieldref>valueLen</fieldref> + </list> + </reply> + </request> + + <request name="PrintSetAttributes" opcode="18"> + <field type="PCONTEXT" name="context" /> + <field type="CARD32" name="stringLen" /> + <field type="CARD8" name="pool" /> + <field type="CARD8" name="rule" /> + <pad bytes="2" /> + <list type="STRING8" name="attributes" /> + </request> + + <request name="PrintGetPageDimensions" opcode="21"> + <field type="PCONTEXT" name="context" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + <field type="CARD16" name="offset_x" /> + <field type="CARD16" name="offset_y" /> + <field type="CARD16" name="reproducible_width" /> + <field type="CARD16" name="reproducible_height" /> + </reply> + </request> + + <request name="PrintQueryScreens" opcode="22"> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="listCount" /> + <pad bytes="20" /> + <list type="WINDOW" name="roots"> + <fieldref>listCount</fieldref> + </list> + <!-- There may be a WINDOW rootWindow here... --> + </reply> + </request> + + <request name="PrintSetImageResolution" opcode="23"> + <field type="PCONTEXT" name="context" /> + <field type="CARD16" name="image_resolution" /> + <reply> + <field type="BOOL" name="status" /> + <field type="CARD16" name="previous_resolutions" /> + </reply> + </request> + + <request name="PrintGetImageResolution" opcode="24"> + <field type="PCONTEXT" name="context" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="image_resolution" /> + </reply> + </request> + + + <!-- Events --> + <event name="Notify" number="0"> + <field type="CARD8" name="detail" /> + <field type="PCONTEXT" name="context" /> + <field type="BOOL" name="cancel" /> + </event> + + <event name="AttributNotify" number="1"> + <field type="CARD8" name="detail" /> + <field type="PCONTEXT" name="context" /> + </event> + + <!-- Errors --> + <error name="BadContext" number="0" /> + <error name="BadSequence" number="1" /> + +</xcb> + diff --git a/libxcb/xcb-proto/src/xselinux.xml b/libxcb/xcb-proto/src/xselinux.xml index 2031fec57..7751470ca 100644 --- a/libxcb/xcb-proto/src/xselinux.xml +++ b/libxcb/xcb-proto/src/xselinux.xml @@ -1,276 +1,276 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-<xcb header="xselinux" extension-xname="SELinux" extension-name="SELinux"
- extension-multiword="false" major-version="1" minor-version="0">
- <import>xproto</import>
-
- <request name="QueryVersion" opcode="0">
- <field type="CARD8" name="client_major" />
- <field type="CARD8" name="client_minor" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="server_major" />
- <field type="CARD16" name="server_minor" />
- </reply>
- </request>
-
- <request name="SetDeviceCreateContext" opcode="1">
- <field type="CARD32" name="context_len" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </request>
-
- <request name="GetDeviceCreateContext" opcode="2">
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="context_len" />
- <pad bytes="20" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="SetDeviceContext" opcode="3">
- <field type="CARD32" name="device" />
- <field type="CARD32" name="context_len" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </request>
-
- <request name="GetDeviceContext" opcode="4">
- <field type="CARD32" name="device" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="context_len" />
- <pad bytes="20" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="SetWindowCreateContext" opcode="5">
- <field type="CARD32" name="context_len" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </request>
-
- <request name="GetWindowCreateContext" opcode="6">
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="context_len" />
- <pad bytes="20" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="GetWindowContext" opcode="7">
- <field type="WINDOW" name="window" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="context_len" />
- <pad bytes="20" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </reply>
- </request>
-
- <struct name="ListItem">
- <field type="ATOM" name="name" />
- <field type="CARD32" name="object_context_len" />
- <field type="CARD32" name="data_context_len" />
- <list type="char" name="object_context">
- <fieldref>object_context_len</fieldref>
- </list>
- <list type="char" name="data_context">
- <fieldref>data_context_len</fieldref>
- </list>
- </struct>
-
- <request name="SetPropertyCreateContext" opcode="8">
- <field type="CARD32" name="context_len" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </request>
-
- <request name="GetPropertyCreateContext" opcode="9">
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="context_len" />
- <pad bytes="20" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="SetPropertyUseContext" opcode="10">
- <field type="CARD32" name="context_len" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </request>
-
- <request name="GetPropertyUseContext" opcode="11">
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="context_len" />
- <pad bytes="20" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="GetPropertyContext" opcode="12">
- <field type="WINDOW" name="window" />
- <field type="ATOM" name="property" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="context_len" />
- <pad bytes="20" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="GetPropertyDataContext" opcode="13">
- <field type="WINDOW" name="window" />
- <field type="ATOM" name="property" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="context_len" />
- <pad bytes="20" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="ListProperties" opcode="14">
- <field type="WINDOW" name="window" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="properties_len" />
- <pad bytes="20" />
- <list type="ListItem" name="properties">
- <fieldref>properties_len</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="SetSelectionCreateContext" opcode="15">
- <field type="CARD32" name="context_len" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </request>
-
- <request name="GetSelectionCreateContext" opcode="16">
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="context_len" />
- <pad bytes="20" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="SetSelectionUseContext" opcode="17">
- <field type="CARD32" name="context_len" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </request>
-
- <request name="GetSelectionUseContext" opcode="18">
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="context_len" />
- <pad bytes="20" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="GetSelectionContext" opcode="19">
- <field type="ATOM" name="selection" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="context_len" />
- <pad bytes="20" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="GetSelectionDataContext" opcode="20">
- <field type="ATOM" name="selection" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="context_len" />
- <pad bytes="20" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="ListSelections" opcode="21">
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="selections_len" />
- <pad bytes="20" />
- <list type="ListItem" name="selections">
- <fieldref>selections_len</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="GetClientContext" opcode="22">
- <field type="CARD32" name="resource" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="context_len" />
- <pad bytes="20" />
- <list type="char" name="context">
- <fieldref>context_len</fieldref>
- </list>
- </reply>
- </request>
-
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> +<xcb header="xselinux" extension-xname="SELinux" extension-name="SELinux" + extension-multiword="false" major-version="1" minor-version="0"> + <import>xproto</import> + + <request name="QueryVersion" opcode="0"> + <field type="CARD8" name="client_major" /> + <field type="CARD8" name="client_minor" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="server_major" /> + <field type="CARD16" name="server_minor" /> + </reply> + </request> + + <request name="SetDeviceCreateContext" opcode="1"> + <field type="CARD32" name="context_len" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </request> + + <request name="GetDeviceCreateContext" opcode="2"> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="context_len" /> + <pad bytes="20" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </reply> + </request> + + <request name="SetDeviceContext" opcode="3"> + <field type="CARD32" name="device" /> + <field type="CARD32" name="context_len" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </request> + + <request name="GetDeviceContext" opcode="4"> + <field type="CARD32" name="device" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="context_len" /> + <pad bytes="20" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </reply> + </request> + + <request name="SetWindowCreateContext" opcode="5"> + <field type="CARD32" name="context_len" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </request> + + <request name="GetWindowCreateContext" opcode="6"> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="context_len" /> + <pad bytes="20" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </reply> + </request> + + <request name="GetWindowContext" opcode="7"> + <field type="WINDOW" name="window" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="context_len" /> + <pad bytes="20" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </reply> + </request> + + <struct name="ListItem"> + <field type="ATOM" name="name" /> + <field type="CARD32" name="object_context_len" /> + <field type="CARD32" name="data_context_len" /> + <list type="char" name="object_context"> + <fieldref>object_context_len</fieldref> + </list> + <list type="char" name="data_context"> + <fieldref>data_context_len</fieldref> + </list> + </struct> + + <request name="SetPropertyCreateContext" opcode="8"> + <field type="CARD32" name="context_len" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </request> + + <request name="GetPropertyCreateContext" opcode="9"> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="context_len" /> + <pad bytes="20" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </reply> + </request> + + <request name="SetPropertyUseContext" opcode="10"> + <field type="CARD32" name="context_len" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </request> + + <request name="GetPropertyUseContext" opcode="11"> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="context_len" /> + <pad bytes="20" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </reply> + </request> + + <request name="GetPropertyContext" opcode="12"> + <field type="WINDOW" name="window" /> + <field type="ATOM" name="property" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="context_len" /> + <pad bytes="20" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </reply> + </request> + + <request name="GetPropertyDataContext" opcode="13"> + <field type="WINDOW" name="window" /> + <field type="ATOM" name="property" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="context_len" /> + <pad bytes="20" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </reply> + </request> + + <request name="ListProperties" opcode="14"> + <field type="WINDOW" name="window" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="properties_len" /> + <pad bytes="20" /> + <list type="ListItem" name="properties"> + <fieldref>properties_len</fieldref> + </list> + </reply> + </request> + + <request name="SetSelectionCreateContext" opcode="15"> + <field type="CARD32" name="context_len" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </request> + + <request name="GetSelectionCreateContext" opcode="16"> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="context_len" /> + <pad bytes="20" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </reply> + </request> + + <request name="SetSelectionUseContext" opcode="17"> + <field type="CARD32" name="context_len" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </request> + + <request name="GetSelectionUseContext" opcode="18"> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="context_len" /> + <pad bytes="20" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </reply> + </request> + + <request name="GetSelectionContext" opcode="19"> + <field type="ATOM" name="selection" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="context_len" /> + <pad bytes="20" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </reply> + </request> + + <request name="GetSelectionDataContext" opcode="20"> + <field type="ATOM" name="selection" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="context_len" /> + <pad bytes="20" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </reply> + </request> + + <request name="ListSelections" opcode="21"> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="selections_len" /> + <pad bytes="20" /> + <list type="ListItem" name="selections"> + <fieldref>selections_len</fieldref> + </list> + </reply> + </request> + + <request name="GetClientContext" opcode="22"> + <field type="CARD32" name="resource" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="context_len" /> + <pad bytes="20" /> + <list type="char" name="context"> + <fieldref>context_len</fieldref> + </list> + </reply> + </request> + +</xcb> diff --git a/libxcb/xcb-proto/src/xv.xml b/libxcb/xcb-proto/src/xv.xml index 08c80b04b..d2bfc2992 100644 --- a/libxcb/xcb-proto/src/xv.xml +++ b/libxcb/xcb-proto/src/xv.xml @@ -1,450 +1,450 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2006 Jeremy Kolb.
-All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-
-<xcb header="xv" extension-xname="XVideo" extension-name="Xv" major-version="2" minor-version="2">
- <import>xproto</import>
- <import>shm</import>
- <!-- Implements version 2.2 of XV -->
-
- <!-- XIDs -->
- <xidtype name="PORT" />
- <xidtype name="ENCODING" />
-
- <enum name="Type">
- <item name="InputMask"><bit>0</bit></item>
- <item name="OutputMask"><bit>1</bit></item>
- <item name="VideoMask"><bit>2</bit></item>
- <item name="StillMask"><bit>3</bit></item>
- <item name="ImageMask"><bit>4</bit></item>
- </enum>
-
- <enum name="ImageFormatInfoType">
- <item name="RGB" />
- <item name="YUV" />
- </enum>
-
- <enum name="ImageFormatInfoFormat">
- <item name="Packed" />
- <item name="Planar" />
- </enum>
-
- <enum name="AttributeFlag">
- <item name="Gettable"><bit>0</bit></item>
- <item name="Settable"><bit>1</bit></item>
- </enum>
-
- <enum name="VideoNotifyReason">
- <item name="Started" />
- <item name="Stopped" />
- <item name="Busy" />
- <item name="Preempted" />
- <item name="HardError" />
- </enum>
-
- <enum name="ScanlineOrder">
- <item name="TopToBottom" />
- <item name="BottomToTop" />
- </enum>
-
- <enum name="GrabPortStatus">
- <item name="Success" />
- <item name="BadExtension" />
- <item name="AlreadyGrabbed" />
- <item name="InvalidTime" />
- <item name="BadReply" />
- <item name="BadAlloc" />
- </enum>
-
- <struct name="Rational">
- <field type="INT32" name="numerator" />
- <field type="INT32" name="denominator" />
- </struct>
-
- <struct name="Format">
- <field type="VISUALID" name="visual" />
- <field type="CARD8" name="depth" />
- <pad bytes="3" />
- </struct>
-
- <struct name="AdaptorInfo">
- <field type="PORT" name="base_id" />
- <field type="CARD16" name="name_size" />
- <field type="CARD16" name="num_ports" />
- <field type="CARD16" name="num_formats" />
- <field type="CARD8" name="type" mask="Type" />
- <pad bytes="1" />
- <list type="char" name="name">
- <fieldref>name_size</fieldref>
- </list>
- <list type="Format" name="formats">
- <fieldref>num_formats</fieldref>
- </list>
-
- </struct>
-
- <struct name="EncodingInfo">
- <field type="ENCODING" name="encoding" />
- <field type="CARD16" name="name_size" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- <!--
- Some versions of Xvproto.h incorrectly have
- this padding after "rate".
- -->
- <pad bytes="2" />
- <field type="Rational" name="rate" />
- <list type="char" name="name">
- <fieldref>name_size</fieldref>
- </list>
- </struct>
-
- <struct name="Image">
- <field type="CARD32" name="id" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- <field type="CARD32" name="data_size" />
- <field type="CARD32" name="num_planes" />
- <list type="CARD32" name="pitches">
- <fieldref>num_planes</fieldref>
- </list>
- <list type="CARD32" name="offsets">
- <fieldref>num_planes</fieldref>
- </list>
- <list type="CARD8" name="data">
- <fieldref>data_size</fieldref>
- </list>
- <!-- Some XPointer "obdata" for SHM use-->
- </struct>
-
- <struct name="AttributeInfo">
- <field type="CARD32" name="flags" mask="AttributeFlag" />
- <field type="INT32" name="min" />
- <field type="INT32" name="max" />
- <field type="CARD32" name="size" />
- <list type="char" name="name">
- <fieldref>size</fieldref>
- </list>
- </struct>
-
- <struct name="ImageFormatInfo">
- <field type="CARD32" name="id" />
- <field type="CARD8" name="type" enum="ImageFormatInfoType" />
- <field type="CARD8" name="byte_order" enum="ImageOrder" />
- <pad bytes="2" />
- <list type="CARD8" name="guid">
- <value>16</value>
- </list>
- <field type="CARD8" name="bpp" />
- <field type="CARD8" name="num_planes" />
- <pad bytes="2" />
- <field type="CARD8" name="depth" />
- <pad bytes="3" />
- <field type="CARD32" name="red_mask" />
- <field type="CARD32" name="green_mask" />
- <field type="CARD32" name="blue_mask" />
- <field type="CARD8" name="format" enum="ImageFormatInfoFormat" />
- <pad bytes="3" />
- <field type="CARD32" name="y_sample_bits" />
- <field type="CARD32" name="u_sample_bits" />
- <field type="CARD32" name="v_sample_bits" />
- <field type="CARD32" name="vhorz_y_period" />
- <field type="CARD32" name="vhorz_u_period" />
- <field type="CARD32" name="vhorz_v_period" />
- <field type="CARD32" name="vvert_y_period" />
- <field type="CARD32" name="vvert_u_period" />
- <field type="CARD32" name="vvert_v_period" />
- <list type="CARD8" name="vcomp_order">
- <value>32</value>
- </list>
- <field type="CARD8" name="vscanline_order" enum="ScanlineOrder" />
- <pad bytes="11" />
- </struct>
-
-
- <!-- Errors -->
- <error name="BadPort" number="0"/>
- <error name="BadEncoding" number="1"/>
- <error name="BadControl" number="2"/>
-
- <!-- Events -->
- <event name="VideoNotify" number="0">
- <field type="BYTE" name="reason" enum="VideoNotifyReason" />
- <field type="TIMESTAMP" name="time" />
- <field type="DRAWABLE" name="drawable" />
- <field type="PORT" name="port" />
- </event>
-
- <event name="PortNotify" number="1">
- <pad bytes="1" />
- <field type="TIMESTAMP" name="time" />
- <field type="PORT" name="port" />
- <field type="ATOM" name="attribute" />
- <field type="INT32" name="value" />
- </event>
-
-
- <!-- Requests -->
- <request name="QueryExtension" opcode="0">
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="major" />
- <field type="CARD16" name="minor" />
- </reply>
- </request>
-
- <request name="QueryAdaptors" opcode="1">
- <field type="WINDOW" name="window" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="num_adaptors" />
- <pad bytes="22" />
- <list type="AdaptorInfo" name="info">
- <fieldref>num_adaptors</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="QueryEncodings" opcode="2">
- <field type="PORT" name="port" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="num_encodings" />
- <!--
- In Xvproto.h this padding is 24 bytes
- in actuality it is 22 bytes
- -->
- <pad bytes="22" />
- <list type="EncodingInfo" name="info">
- <fieldref>num_encodings</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="GrabPort" opcode="3">
- <field type="PORT" name="port" />
- <field type="TIMESTAMP" name="time" altenum="Time" />
- <reply>
- <field type="BYTE" name="result" enum="GrabPortStatus" />
- </reply>
- </request>
-
- <request name="UngrabPort" opcode="4">
- <field type="PORT" name="port" />
- <field type="TIMESTAMP" name="time" altenum="Time" />
- </request>
-
- <request name="PutVideo" opcode="5">
- <field type="PORT" name="port" />
- <field type="DRAWABLE" name="drawable" />
- <field type="GCONTEXT" name="gc" />
- <field type="INT16" name="vid_x" />
- <field type="INT16" name="vid_y" />
- <field type="CARD16" name="vid_w" />
- <field type="CARD16" name="vid_h" />
- <field type="INT16" name="drw_x" />
- <field type="INT16" name="drw_y" />
- <field type="CARD16" name="drw_w" />
- <field type="CARD16" name="drw_h" />
- </request>
-
- <request name="PutStill" opcode="6">
- <field type="PORT" name="port" />
- <field type="DRAWABLE" name="drawable" />
- <field type="GCONTEXT" name="gc" />
- <field type="INT16" name="vid_x" />
- <field type="INT16" name="vid_y" />
- <field type="CARD16" name="vid_w" />
- <field type="CARD16" name="vid_h" />
- <field type="INT16" name="drw_x" />
- <field type="INT16" name="drw_y" />
- <field type="CARD16" name="drw_w" />
- <field type="CARD16" name="drw_h" />
- </request>
-
- <request name="GetVideo" opcode="7">
- <field type="PORT" name="port" />
- <field type="DRAWABLE" name="drawable" />
- <field type="GCONTEXT" name="gc" />
- <field type="INT16" name="vid_x" />
- <field type="INT16" name="vid_y" />
- <field type="CARD16" name="vid_w" />
- <field type="CARD16" name="vid_h" />
- <field type="INT16" name="drw_x" />
- <field type="INT16" name="drw_y" />
- <field type="CARD16" name="drw_w" />
- <field type="CARD16" name="drw_h" />
- </request>
-
- <request name="GetStill" opcode="8">
- <field type="PORT" name="port" />
- <field type="DRAWABLE" name="drawable" />
- <field type="GCONTEXT" name="gc" />
- <field type="INT16" name="vid_x" />
- <field type="INT16" name="vid_y" />
- <field type="CARD16" name="vid_w" />
- <field type="CARD16" name="vid_h" />
- <field type="INT16" name="drw_x" />
- <field type="INT16" name="drw_y" />
- <field type="CARD16" name="drw_w" />
- <field type="CARD16" name="drw_h" />
- </request>
-
- <request name="StopVideo" opcode="9">
- <field type="PORT" name="port" />
- <field type="DRAWABLE" name="drawable" />
- </request>
-
- <request name="SelectVideoNotify" opcode="10">
- <field type="DRAWABLE" name="drawable" />
- <field type="BOOL" name="onoff" />
- <pad bytes="3" />
- </request>
-
- <request name="SelectPortNotify" opcode="11">
- <field type="PORT" name="port" />
- <field type="BOOL" name="onoff" />
- <pad bytes="3" />
- </request>
-
- <request name="QueryBestSize" opcode="12">
- <field type="PORT" name="port" />
- <field type="CARD16" name="vid_w" />
- <field type="CARD16" name="vid_h" />
- <field type="CARD16" name="drw_w" />
- <field type="CARD16" name="drw_h" />
- <field type="BOOL" name="motion" />
- <pad bytes="3" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="actual_width" />
- <field type="CARD16" name="actual_height" />
- </reply>
- </request>
-
- <request name="SetPortAttribute" opcode="13">
- <field type="PORT" name="port" />
- <field type="ATOM" name="attribute" />
- <field type="INT32" name="value" />
- </request>
-
- <request name="GetPortAttribute" opcode="14">
- <field type="PORT" name="port" />
- <field type="ATOM" name="attribute" />
- <reply>
- <pad bytes="1" />
- <field type="INT32" name="value" />
- </reply>
- </request>
-
- <!-- Not in the docs beyond this point :( -->
-
- <request name="QueryPortAttributes" opcode="15">
- <field type="PORT" name="port" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="num_attributes" />
- <field type="CARD32" name="text_size" />
- <pad bytes="16" />
- <list type="AttributeInfo" name="attributes">
- <fieldref>num_attributes</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="ListImageFormats" opcode="16">
- <field type="PORT" name="port" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="num_formats" />
- <pad bytes="20" />
- <list type="ImageFormatInfo" name="format">
- <fieldref>num_formats</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="QueryImageAttributes" opcode="17">
- <field type="PORT" name="port" />
- <field type="CARD32" name="id" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="num_planes" />
- <field type="CARD32" name="data_size" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- <pad bytes="12" />
- <list type="CARD32" name="pitches">
- <fieldref>num_planes</fieldref>
- </list>
- <list type="CARD32" name="offsets">
- <fieldref>num_planes</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="PutImage" opcode="18">
- <field type="PORT" name="port" />
- <field type="DRAWABLE" name="drawable" />
- <field type="GCONTEXT" name="gc" />
- <field type="CARD32" name="id" />
- <field type="INT16" name="src_x" />
- <field type="INT16" name="src_y" />
- <field type="CARD16" name="src_w" />
- <field type="CARD16" name="src_h" />
- <field type="INT16" name="drw_x" />
- <field type="INT16" name="drw_y" />
- <field type="CARD16" name="drw_w" />
- <field type="CARD16" name="drw_h" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- <list type="CARD8" name="data" />
- </request>
-
- <request name="ShmPutImage" opcode="19">
- <field type="PORT" name="port" />
- <field type="DRAWABLE" name="drawable" />
- <field type="GCONTEXT" name="gc" />
- <field type="SEG" name="shmseg" />
- <field type="CARD32" name="id" />
- <field type="CARD32" name="offset" />
- <field type="INT16" name="src_x" />
- <field type="INT16" name="src_y" />
- <field type="CARD16" name="src_w" />
- <field type="CARD16" name="src_h" />
- <field type="INT16" name="drw_x" />
- <field type="INT16" name="drw_y" />
- <field type="CARD16" name="drw_w" />
- <field type="CARD16" name="drw_h" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- <field type="CARD8" name="send_event" />
- <pad bytes="3" />
- </request>
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2006 Jeremy Kolb. +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> + +<xcb header="xv" extension-xname="XVideo" extension-name="Xv" major-version="2" minor-version="2"> + <import>xproto</import> + <import>shm</import> + <!-- Implements version 2.2 of XV --> + + <!-- XIDs --> + <xidtype name="PORT" /> + <xidtype name="ENCODING" /> + + <enum name="Type"> + <item name="InputMask"><bit>0</bit></item> + <item name="OutputMask"><bit>1</bit></item> + <item name="VideoMask"><bit>2</bit></item> + <item name="StillMask"><bit>3</bit></item> + <item name="ImageMask"><bit>4</bit></item> + </enum> + + <enum name="ImageFormatInfoType"> + <item name="RGB" /> + <item name="YUV" /> + </enum> + + <enum name="ImageFormatInfoFormat"> + <item name="Packed" /> + <item name="Planar" /> + </enum> + + <enum name="AttributeFlag"> + <item name="Gettable"><bit>0</bit></item> + <item name="Settable"><bit>1</bit></item> + </enum> + + <enum name="VideoNotifyReason"> + <item name="Started" /> + <item name="Stopped" /> + <item name="Busy" /> + <item name="Preempted" /> + <item name="HardError" /> + </enum> + + <enum name="ScanlineOrder"> + <item name="TopToBottom" /> + <item name="BottomToTop" /> + </enum> + + <enum name="GrabPortStatus"> + <item name="Success" /> + <item name="BadExtension" /> + <item name="AlreadyGrabbed" /> + <item name="InvalidTime" /> + <item name="BadReply" /> + <item name="BadAlloc" /> + </enum> + + <struct name="Rational"> + <field type="INT32" name="numerator" /> + <field type="INT32" name="denominator" /> + </struct> + + <struct name="Format"> + <field type="VISUALID" name="visual" /> + <field type="CARD8" name="depth" /> + <pad bytes="3" /> + </struct> + + <struct name="AdaptorInfo"> + <field type="PORT" name="base_id" /> + <field type="CARD16" name="name_size" /> + <field type="CARD16" name="num_ports" /> + <field type="CARD16" name="num_formats" /> + <field type="CARD8" name="type" mask="Type" /> + <pad bytes="1" /> + <list type="char" name="name"> + <fieldref>name_size</fieldref> + </list> + <list type="Format" name="formats"> + <fieldref>num_formats</fieldref> + </list> + + </struct> + + <struct name="EncodingInfo"> + <field type="ENCODING" name="encoding" /> + <field type="CARD16" name="name_size" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + <!-- + Some versions of Xvproto.h incorrectly have + this padding after "rate". + --> + <pad bytes="2" /> + <field type="Rational" name="rate" /> + <list type="char" name="name"> + <fieldref>name_size</fieldref> + </list> + </struct> + + <struct name="Image"> + <field type="CARD32" name="id" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + <field type="CARD32" name="data_size" /> + <field type="CARD32" name="num_planes" /> + <list type="CARD32" name="pitches"> + <fieldref>num_planes</fieldref> + </list> + <list type="CARD32" name="offsets"> + <fieldref>num_planes</fieldref> + </list> + <list type="CARD8" name="data"> + <fieldref>data_size</fieldref> + </list> + <!-- Some XPointer "obdata" for SHM use--> + </struct> + + <struct name="AttributeInfo"> + <field type="CARD32" name="flags" mask="AttributeFlag" /> + <field type="INT32" name="min" /> + <field type="INT32" name="max" /> + <field type="CARD32" name="size" /> + <list type="char" name="name"> + <fieldref>size</fieldref> + </list> + </struct> + + <struct name="ImageFormatInfo"> + <field type="CARD32" name="id" /> + <field type="CARD8" name="type" enum="ImageFormatInfoType" /> + <field type="CARD8" name="byte_order" enum="ImageOrder" /> + <pad bytes="2" /> + <list type="CARD8" name="guid"> + <value>16</value> + </list> + <field type="CARD8" name="bpp" /> + <field type="CARD8" name="num_planes" /> + <pad bytes="2" /> + <field type="CARD8" name="depth" /> + <pad bytes="3" /> + <field type="CARD32" name="red_mask" /> + <field type="CARD32" name="green_mask" /> + <field type="CARD32" name="blue_mask" /> + <field type="CARD8" name="format" enum="ImageFormatInfoFormat" /> + <pad bytes="3" /> + <field type="CARD32" name="y_sample_bits" /> + <field type="CARD32" name="u_sample_bits" /> + <field type="CARD32" name="v_sample_bits" /> + <field type="CARD32" name="vhorz_y_period" /> + <field type="CARD32" name="vhorz_u_period" /> + <field type="CARD32" name="vhorz_v_period" /> + <field type="CARD32" name="vvert_y_period" /> + <field type="CARD32" name="vvert_u_period" /> + <field type="CARD32" name="vvert_v_period" /> + <list type="CARD8" name="vcomp_order"> + <value>32</value> + </list> + <field type="CARD8" name="vscanline_order" enum="ScanlineOrder" /> + <pad bytes="11" /> + </struct> + + + <!-- Errors --> + <error name="BadPort" number="0"/> + <error name="BadEncoding" number="1"/> + <error name="BadControl" number="2"/> + + <!-- Events --> + <event name="VideoNotify" number="0"> + <field type="BYTE" name="reason" enum="VideoNotifyReason" /> + <field type="TIMESTAMP" name="time" /> + <field type="DRAWABLE" name="drawable" /> + <field type="PORT" name="port" /> + </event> + + <event name="PortNotify" number="1"> + <pad bytes="1" /> + <field type="TIMESTAMP" name="time" /> + <field type="PORT" name="port" /> + <field type="ATOM" name="attribute" /> + <field type="INT32" name="value" /> + </event> + + + <!-- Requests --> + <request name="QueryExtension" opcode="0"> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="major" /> + <field type="CARD16" name="minor" /> + </reply> + </request> + + <request name="QueryAdaptors" opcode="1"> + <field type="WINDOW" name="window" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="num_adaptors" /> + <pad bytes="22" /> + <list type="AdaptorInfo" name="info"> + <fieldref>num_adaptors</fieldref> + </list> + </reply> + </request> + + <request name="QueryEncodings" opcode="2"> + <field type="PORT" name="port" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="num_encodings" /> + <!-- + In Xvproto.h this padding is 24 bytes + in actuality it is 22 bytes + --> + <pad bytes="22" /> + <list type="EncodingInfo" name="info"> + <fieldref>num_encodings</fieldref> + </list> + </reply> + </request> + + <request name="GrabPort" opcode="3"> + <field type="PORT" name="port" /> + <field type="TIMESTAMP" name="time" altenum="Time" /> + <reply> + <field type="BYTE" name="result" enum="GrabPortStatus" /> + </reply> + </request> + + <request name="UngrabPort" opcode="4"> + <field type="PORT" name="port" /> + <field type="TIMESTAMP" name="time" altenum="Time" /> + </request> + + <request name="PutVideo" opcode="5"> + <field type="PORT" name="port" /> + <field type="DRAWABLE" name="drawable" /> + <field type="GCONTEXT" name="gc" /> + <field type="INT16" name="vid_x" /> + <field type="INT16" name="vid_y" /> + <field type="CARD16" name="vid_w" /> + <field type="CARD16" name="vid_h" /> + <field type="INT16" name="drw_x" /> + <field type="INT16" name="drw_y" /> + <field type="CARD16" name="drw_w" /> + <field type="CARD16" name="drw_h" /> + </request> + + <request name="PutStill" opcode="6"> + <field type="PORT" name="port" /> + <field type="DRAWABLE" name="drawable" /> + <field type="GCONTEXT" name="gc" /> + <field type="INT16" name="vid_x" /> + <field type="INT16" name="vid_y" /> + <field type="CARD16" name="vid_w" /> + <field type="CARD16" name="vid_h" /> + <field type="INT16" name="drw_x" /> + <field type="INT16" name="drw_y" /> + <field type="CARD16" name="drw_w" /> + <field type="CARD16" name="drw_h" /> + </request> + + <request name="GetVideo" opcode="7"> + <field type="PORT" name="port" /> + <field type="DRAWABLE" name="drawable" /> + <field type="GCONTEXT" name="gc" /> + <field type="INT16" name="vid_x" /> + <field type="INT16" name="vid_y" /> + <field type="CARD16" name="vid_w" /> + <field type="CARD16" name="vid_h" /> + <field type="INT16" name="drw_x" /> + <field type="INT16" name="drw_y" /> + <field type="CARD16" name="drw_w" /> + <field type="CARD16" name="drw_h" /> + </request> + + <request name="GetStill" opcode="8"> + <field type="PORT" name="port" /> + <field type="DRAWABLE" name="drawable" /> + <field type="GCONTEXT" name="gc" /> + <field type="INT16" name="vid_x" /> + <field type="INT16" name="vid_y" /> + <field type="CARD16" name="vid_w" /> + <field type="CARD16" name="vid_h" /> + <field type="INT16" name="drw_x" /> + <field type="INT16" name="drw_y" /> + <field type="CARD16" name="drw_w" /> + <field type="CARD16" name="drw_h" /> + </request> + + <request name="StopVideo" opcode="9"> + <field type="PORT" name="port" /> + <field type="DRAWABLE" name="drawable" /> + </request> + + <request name="SelectVideoNotify" opcode="10"> + <field type="DRAWABLE" name="drawable" /> + <field type="BOOL" name="onoff" /> + <pad bytes="3" /> + </request> + + <request name="SelectPortNotify" opcode="11"> + <field type="PORT" name="port" /> + <field type="BOOL" name="onoff" /> + <pad bytes="3" /> + </request> + + <request name="QueryBestSize" opcode="12"> + <field type="PORT" name="port" /> + <field type="CARD16" name="vid_w" /> + <field type="CARD16" name="vid_h" /> + <field type="CARD16" name="drw_w" /> + <field type="CARD16" name="drw_h" /> + <field type="BOOL" name="motion" /> + <pad bytes="3" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="actual_width" /> + <field type="CARD16" name="actual_height" /> + </reply> + </request> + + <request name="SetPortAttribute" opcode="13"> + <field type="PORT" name="port" /> + <field type="ATOM" name="attribute" /> + <field type="INT32" name="value" /> + </request> + + <request name="GetPortAttribute" opcode="14"> + <field type="PORT" name="port" /> + <field type="ATOM" name="attribute" /> + <reply> + <pad bytes="1" /> + <field type="INT32" name="value" /> + </reply> + </request> + + <!-- Not in the docs beyond this point :( --> + + <request name="QueryPortAttributes" opcode="15"> + <field type="PORT" name="port" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="num_attributes" /> + <field type="CARD32" name="text_size" /> + <pad bytes="16" /> + <list type="AttributeInfo" name="attributes"> + <fieldref>num_attributes</fieldref> + </list> + </reply> + </request> + + <request name="ListImageFormats" opcode="16"> + <field type="PORT" name="port" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="num_formats" /> + <pad bytes="20" /> + <list type="ImageFormatInfo" name="format"> + <fieldref>num_formats</fieldref> + </list> + </reply> + </request> + + <request name="QueryImageAttributes" opcode="17"> + <field type="PORT" name="port" /> + <field type="CARD32" name="id" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="num_planes" /> + <field type="CARD32" name="data_size" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + <pad bytes="12" /> + <list type="CARD32" name="pitches"> + <fieldref>num_planes</fieldref> + </list> + <list type="CARD32" name="offsets"> + <fieldref>num_planes</fieldref> + </list> + </reply> + </request> + + <request name="PutImage" opcode="18"> + <field type="PORT" name="port" /> + <field type="DRAWABLE" name="drawable" /> + <field type="GCONTEXT" name="gc" /> + <field type="CARD32" name="id" /> + <field type="INT16" name="src_x" /> + <field type="INT16" name="src_y" /> + <field type="CARD16" name="src_w" /> + <field type="CARD16" name="src_h" /> + <field type="INT16" name="drw_x" /> + <field type="INT16" name="drw_y" /> + <field type="CARD16" name="drw_w" /> + <field type="CARD16" name="drw_h" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + <list type="CARD8" name="data" /> + </request> + + <request name="ShmPutImage" opcode="19"> + <field type="PORT" name="port" /> + <field type="DRAWABLE" name="drawable" /> + <field type="GCONTEXT" name="gc" /> + <field type="SEG" name="shmseg" /> + <field type="CARD32" name="id" /> + <field type="CARD32" name="offset" /> + <field type="INT16" name="src_x" /> + <field type="INT16" name="src_y" /> + <field type="CARD16" name="src_w" /> + <field type="CARD16" name="src_h" /> + <field type="INT16" name="drw_x" /> + <field type="INT16" name="drw_y" /> + <field type="CARD16" name="drw_w" /> + <field type="CARD16" name="drw_h" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + <field type="CARD8" name="send_event" /> + <pad bytes="3" /> + </request> +</xcb> diff --git a/libxcb/xcb-proto/src/xvmc.xml b/libxcb/xcb-proto/src/xvmc.xml index 1c477ae49..ac80003f9 100644 --- a/libxcb/xcb-proto/src/xvmc.xml +++ b/libxcb/xcb-proto/src/xvmc.xml @@ -1,146 +1,146 @@ -<?xml version="1.0" encoding="utf-8"?>
-<!--
-Copyright (C) 2006 Jeremy Kolb.
-All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the names of the authors or their
-institutions shall not be used in advertising or otherwise to promote the
-sale, use or other dealings in this Software without prior written
-authorization from the authors.
--->
-
-<xcb header="xvmc" extension-xname="XVideo-MotionCompensation" extension-name="XvMC" major-version="1" minor-version="1">
- <import>xv</import>
-
- <xidtype name="CONTEXT" />
- <xidtype name="SURFACE" />
- <xidtype name="SUBPICTURE" />
-
- <struct name="SurfaceInfo">
- <field type="SURFACE" name="id" />
- <field type="CARD16" name="chroma_format" />
- <field type="CARD16" name="pad0" />
- <field type="CARD16" name="max_width" />
- <field type="CARD16" name="max_height" />
- <field type="CARD16" name="subpicture_max_width" />
- <field type="CARD16" name="subpicture_max_height" />
- <field type="CARD32" name="mc_type" />
- <field type="CARD32" name="flags" />
- </struct>
-
- <request name="QueryVersion" opcode="0">
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="major" />
- <field type="CARD32" name="minor" />
- </reply>
- </request>
-
- <request name="ListSurfaceTypes" opcode="1">
- <field type="PORT" name="port_id" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="num" />
- <pad bytes="20" />
- <list type="SurfaceInfo" name="surfaces">
- <fieldref>num</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="CreateContext" opcode="2">
- <field type="CONTEXT" name="context_id" />
- <field type="PORT" name="port_id" />
- <field type="SURFACE" name="surface_id" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- <field type="CARD32" name="flags" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="width_actual" />
- <field type="CARD16" name="height_actual" />
- <field type="CARD32" name="flags_return" />
- <pad bytes="20" />
- <list type="CARD32" name="priv_data">
- <fieldref>length</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="DestroyContext" opcode="3">
- <field type="CONTEXT" name="context_id" />
- </request>
-
- <request name="CreateSurface" opcode="4">
- <field type="SURFACE" name="surface_id" />
- <field type="CONTEXT" name="context_id" />
- <reply>
- <pad bytes="1" />
- <pad bytes="24" />
- <list type="CARD32" name="priv_data">
- <fieldref>length</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="DestroySurface" opcode="5">
- <field type="SURFACE" name="surface_id" />
- </request>
-
- <request name="CreateSubpicture" opcode="6">
- <field type="SUBPICTURE" name="subpicture_id" />
- <field type="CONTEXT" name="context" />
- <field type="CARD32" name="xvimage_id" />
- <field type="CARD16" name="width" />
- <field type="CARD16" name="height" />
- <reply>
- <pad bytes="1" />
- <field type="CARD16" name="width_actual" />
- <field type="CARD16" name="height_actual" />
- <field type="CARD16" name="num_palette_entries" />
- <field type="CARD16" name="entry_bytes" />
- <list type="CARD8" name="component_order">
- <value>4</value>
- </list>
- <pad bytes="12" />
- <list type="CARD32" name="priv_data">
- <fieldref>length</fieldref>
- </list>
- </reply>
- </request>
-
- <request name="DestroySubpicture" opcode="7">
- <field type="SUBPICTURE" name="subpicture_id" />
- </request>
-
- <request name="ListSubpictureTypes" opcode="8">
- <field type="PORT" name="port_id" />
- <field type="SURFACE" name="surface_id" />
- <reply>
- <pad bytes="1" />
- <field type="CARD32" name="num" />
- <pad bytes="20" />
- <list type="ImageFormatInfo" name="types">
- <fieldref>num</fieldref>
- </list>
- </reply>
- </request>
-
-</xcb>
+<?xml version="1.0" encoding="utf-8"?> +<!-- +Copyright (C) 2006 Jeremy Kolb. +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors or their +institutions shall not be used in advertising or otherwise to promote the +sale, use or other dealings in this Software without prior written +authorization from the authors. +--> + +<xcb header="xvmc" extension-xname="XVideo-MotionCompensation" extension-name="XvMC" major-version="1" minor-version="1"> + <import>xv</import> + + <xidtype name="CONTEXT" /> + <xidtype name="SURFACE" /> + <xidtype name="SUBPICTURE" /> + + <struct name="SurfaceInfo"> + <field type="SURFACE" name="id" /> + <field type="CARD16" name="chroma_format" /> + <field type="CARD16" name="pad0" /> + <field type="CARD16" name="max_width" /> + <field type="CARD16" name="max_height" /> + <field type="CARD16" name="subpicture_max_width" /> + <field type="CARD16" name="subpicture_max_height" /> + <field type="CARD32" name="mc_type" /> + <field type="CARD32" name="flags" /> + </struct> + + <request name="QueryVersion" opcode="0"> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="major" /> + <field type="CARD32" name="minor" /> + </reply> + </request> + + <request name="ListSurfaceTypes" opcode="1"> + <field type="PORT" name="port_id" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="num" /> + <pad bytes="20" /> + <list type="SurfaceInfo" name="surfaces"> + <fieldref>num</fieldref> + </list> + </reply> + </request> + + <request name="CreateContext" opcode="2"> + <field type="CONTEXT" name="context_id" /> + <field type="PORT" name="port_id" /> + <field type="SURFACE" name="surface_id" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + <field type="CARD32" name="flags" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="width_actual" /> + <field type="CARD16" name="height_actual" /> + <field type="CARD32" name="flags_return" /> + <pad bytes="20" /> + <list type="CARD32" name="priv_data"> + <fieldref>length</fieldref> + </list> + </reply> + </request> + + <request name="DestroyContext" opcode="3"> + <field type="CONTEXT" name="context_id" /> + </request> + + <request name="CreateSurface" opcode="4"> + <field type="SURFACE" name="surface_id" /> + <field type="CONTEXT" name="context_id" /> + <reply> + <pad bytes="1" /> + <pad bytes="24" /> + <list type="CARD32" name="priv_data"> + <fieldref>length</fieldref> + </list> + </reply> + </request> + + <request name="DestroySurface" opcode="5"> + <field type="SURFACE" name="surface_id" /> + </request> + + <request name="CreateSubpicture" opcode="6"> + <field type="SUBPICTURE" name="subpicture_id" /> + <field type="CONTEXT" name="context" /> + <field type="CARD32" name="xvimage_id" /> + <field type="CARD16" name="width" /> + <field type="CARD16" name="height" /> + <reply> + <pad bytes="1" /> + <field type="CARD16" name="width_actual" /> + <field type="CARD16" name="height_actual" /> + <field type="CARD16" name="num_palette_entries" /> + <field type="CARD16" name="entry_bytes" /> + <list type="CARD8" name="component_order"> + <value>4</value> + </list> + <pad bytes="12" /> + <list type="CARD32" name="priv_data"> + <fieldref>length</fieldref> + </list> + </reply> + </request> + + <request name="DestroySubpicture" opcode="7"> + <field type="SUBPICTURE" name="subpicture_id" /> + </request> + + <request name="ListSubpictureTypes" opcode="8"> + <field type="PORT" name="port_id" /> + <field type="SURFACE" name="surface_id" /> + <reply> + <pad bytes="1" /> + <field type="CARD32" name="num" /> + <pad bytes="20" /> + <list type="ImageFormatInfo" name="types"> + <fieldref>num</fieldref> + </list> + </reply> + </request> + +</xcb> diff --git a/libxcb/xcb-proto/xcbgen/Makefile.am b/libxcb/xcb-proto/xcbgen/Makefile.am index c4c79bfda..110a992f1 100644 --- a/libxcb/xcb-proto/xcbgen/Makefile.am +++ b/libxcb/xcb-proto/xcbgen/Makefile.am @@ -1,3 +1,3 @@ -pkgpythondir = $(pythondir)/xcbgen
-
-pkgpython_PYTHON = __init__.py error.py expr.py matcher.py state.py xtypes.py
+pkgpythondir = $(pythondir)/xcbgen + +pkgpython_PYTHON = __init__.py error.py expr.py matcher.py state.py xtypes.py diff --git a/libxcb/xcb-proto/xcbgen/__init__.py b/libxcb/xcb-proto/xcbgen/__init__.py index d3f5a12fa..8b1378917 100644 --- a/libxcb/xcb-proto/xcbgen/__init__.py +++ b/libxcb/xcb-proto/xcbgen/__init__.py @@ -1 +1 @@ -
+ diff --git a/libxcb/xcb-proto/xcbgen/error.py b/libxcb/xcb-proto/xcbgen/error.py index 611d638b0..bbcd5013d 100644 --- a/libxcb/xcb-proto/xcbgen/error.py +++ b/libxcb/xcb-proto/xcbgen/error.py @@ -1,5 +1,5 @@ -class ResolveException(Exception):
- '''
- Gets thrown when a type doesn't resolve in the XML.
- '''
- pass
+class ResolveException(Exception): + ''' + Gets thrown when a type doesn't resolve in the XML. + ''' + pass diff --git a/libxcb/xcb-randr.pc.in b/libxcb/xcb-randr.pc.in index 93a301138..ac7f35d97 100644 --- a/libxcb/xcb-randr.pc.in +++ b/libxcb/xcb-randr.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB RandR
-Description: XCB RandR Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb
-Libs: -L${libdir} -lxcb-randr
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB RandR +Description: XCB RandR Extension +Version: @PACKAGE_VERSION@ +Requires: xcb +Libs: -L${libdir} -lxcb-randr +Cflags: -I${includedir} diff --git a/libxcb/xcb-record.pc.in b/libxcb/xcb-record.pc.in index 3c0cd6c0e..689f098fc 100644 --- a/libxcb/xcb-record.pc.in +++ b/libxcb/xcb-record.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB Record
-Description: XCB Record Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb
-Libs: -L${libdir} -lxcb-record
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB Record +Description: XCB Record Extension +Version: @PACKAGE_VERSION@ +Requires: xcb +Libs: -L${libdir} -lxcb-record +Cflags: -I${includedir} diff --git a/libxcb/xcb-render.pc.in b/libxcb/xcb-render.pc.in index 0f0769cc1..c3b050ab6 100644 --- a/libxcb/xcb-render.pc.in +++ b/libxcb/xcb-render.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB Render
-Description: XCB Render Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb
-Libs: -L${libdir} -lxcb-render
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB Render +Description: XCB Render Extension +Version: @PACKAGE_VERSION@ +Requires: xcb +Libs: -L${libdir} -lxcb-render +Cflags: -I${includedir} diff --git a/libxcb/xcb-res.pc.in b/libxcb/xcb-res.pc.in index b620269db..62dbab63e 100644 --- a/libxcb/xcb-res.pc.in +++ b/libxcb/xcb-res.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB Res
-Description: XCB X-Resource Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb
-Libs: -L${libdir} -lxcb-res
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB Res +Description: XCB X-Resource Extension +Version: @PACKAGE_VERSION@ +Requires: xcb +Libs: -L${libdir} -lxcb-res +Cflags: -I${includedir} diff --git a/libxcb/xcb-screensaver.pc.in b/libxcb/xcb-screensaver.pc.in index 6a9ad19b5..ba3f8ecf3 100644 --- a/libxcb/xcb-screensaver.pc.in +++ b/libxcb/xcb-screensaver.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB Screensaver
-Description: XCB Screensaver Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb
-Libs: -L${libdir} -lxcb-screensaver
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB Screensaver +Description: XCB Screensaver Extension +Version: @PACKAGE_VERSION@ +Requires: xcb +Libs: -L${libdir} -lxcb-screensaver +Cflags: -I${includedir} diff --git a/libxcb/xcb-shape.pc.in b/libxcb/xcb-shape.pc.in index 0e265b848..880204d8a 100644 --- a/libxcb/xcb-shape.pc.in +++ b/libxcb/xcb-shape.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB Shape
-Description: XCB Shape Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb
-Libs: -L${libdir} -lxcb-shape
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB Shape +Description: XCB Shape Extension +Version: @PACKAGE_VERSION@ +Requires: xcb +Libs: -L${libdir} -lxcb-shape +Cflags: -I${includedir} diff --git a/libxcb/xcb-shm.pc.in b/libxcb/xcb-shm.pc.in index 33ee37d97..9256bf015 100644 --- a/libxcb/xcb-shm.pc.in +++ b/libxcb/xcb-shm.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB Shm
-Description: XCB Shm Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb
-Libs: -L${libdir} -lxcb-shm
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB Shm +Description: XCB Shm Extension +Version: @PACKAGE_VERSION@ +Requires: xcb +Libs: -L${libdir} -lxcb-shm +Cflags: -I${includedir} diff --git a/libxcb/xcb-sync.pc.in b/libxcb/xcb-sync.pc.in index 6f70a6e87..ead76d166 100644 --- a/libxcb/xcb-sync.pc.in +++ b/libxcb/xcb-sync.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB Sync
-Description: XCB Sync Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb
-Libs: -L${libdir} -lxcb-sync
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB Sync +Description: XCB Sync Extension +Version: @PACKAGE_VERSION@ +Requires: xcb +Libs: -L${libdir} -lxcb-sync +Cflags: -I${includedir} diff --git a/libxcb/xcb-xevie.pc.in b/libxcb/xcb-xevie.pc.in index aad488eec..0aa3e02ac 100644 --- a/libxcb/xcb-xevie.pc.in +++ b/libxcb/xcb-xevie.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB Xevie
-Description: XCB Xevie Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb
-Libs: -L${libdir} -lxcb-xevie
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB Xevie +Description: XCB Xevie Extension +Version: @PACKAGE_VERSION@ +Requires: xcb +Libs: -L${libdir} -lxcb-xevie +Cflags: -I${includedir} diff --git a/libxcb/xcb-xf86dri.pc.in b/libxcb/xcb-xf86dri.pc.in index dac5828e4..f3f29806d 100644 --- a/libxcb/xcb-xf86dri.pc.in +++ b/libxcb/xcb-xf86dri.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB XFree86-DRI
-Description: XCB XFree86-DRI Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb
-Libs: -L${libdir} -lxcb-xf86dri
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB XFree86-DRI +Description: XCB XFree86-DRI Extension +Version: @PACKAGE_VERSION@ +Requires: xcb +Libs: -L${libdir} -lxcb-xf86dri +Cflags: -I${includedir} diff --git a/libxcb/xcb-xfixes.pc.in b/libxcb/xcb-xfixes.pc.in index d13fe30a9..93eafda30 100644 --- a/libxcb/xcb-xfixes.pc.in +++ b/libxcb/xcb-xfixes.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB XFixes
-Description: XCB XFixes Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb xcb-render xcb-shape
-Libs: -L${libdir} -lxcb-xfixes
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB XFixes +Description: XCB XFixes Extension +Version: @PACKAGE_VERSION@ +Requires: xcb xcb-render xcb-shape +Libs: -L${libdir} -lxcb-xfixes +Cflags: -I${includedir} diff --git a/libxcb/xcb-xinerama.pc.in b/libxcb/xcb-xinerama.pc.in index 84ecba128..c4775f9b5 100644 --- a/libxcb/xcb-xinerama.pc.in +++ b/libxcb/xcb-xinerama.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB Xinerama
-Description: XCB Xinerama Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb
-Libs: -L${libdir} -lxcb-xinerama
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB Xinerama +Description: XCB Xinerama Extension +Version: @PACKAGE_VERSION@ +Requires: xcb +Libs: -L${libdir} -lxcb-xinerama +Cflags: -I${includedir} diff --git a/libxcb/xcb-xinput.pc.in b/libxcb/xcb-xinput.pc.in index d1d1b8f5f..ec3122947 100644 --- a/libxcb/xcb-xinput.pc.in +++ b/libxcb/xcb-xinput.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB XInput
-Description: XCB XInput Extension (EXPERIMENTAL)
-Version: @PACKAGE_VERSION@
-Requires: xcb
-Libs: -L${libdir} -lxcb-xinput
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB XInput +Description: XCB XInput Extension (EXPERIMENTAL) +Version: @PACKAGE_VERSION@ +Requires: xcb +Libs: -L${libdir} -lxcb-xinput +Cflags: -I${includedir} diff --git a/libxcb/xcb-xprint.pc.in b/libxcb/xcb-xprint.pc.in index f0c257162..b5275d5d5 100644 --- a/libxcb/xcb-xprint.pc.in +++ b/libxcb/xcb-xprint.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB Xprint
-Description: XCB Xprint Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb
-Libs: -L${libdir} -lxcb-xprint
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB Xprint +Description: XCB Xprint Extension +Version: @PACKAGE_VERSION@ +Requires: xcb +Libs: -L${libdir} -lxcb-xprint +Cflags: -I${includedir} diff --git a/libxcb/xcb-xselinux.pc.in b/libxcb/xcb-xselinux.pc.in index f7042f26c..6a71f733a 100644 --- a/libxcb/xcb-xselinux.pc.in +++ b/libxcb/xcb-xselinux.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB SELinux
-Description: XCB SELinux Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb
-Libs: -L${libdir} -lxcb-xselinux
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB SELinux +Description: XCB SELinux Extension +Version: @PACKAGE_VERSION@ +Requires: xcb +Libs: -L${libdir} -lxcb-xselinux +Cflags: -I${includedir} diff --git a/libxcb/xcb-xtest.pc.in b/libxcb/xcb-xtest.pc.in index cead05604..886c4dc2f 100644 --- a/libxcb/xcb-xtest.pc.in +++ b/libxcb/xcb-xtest.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB XTEST
-Description: XCB XTEST Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb
-Libs: -L${libdir} -lxcb-xtest
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB XTEST +Description: XCB XTEST Extension +Version: @PACKAGE_VERSION@ +Requires: xcb +Libs: -L${libdir} -lxcb-xtest +Cflags: -I${includedir} diff --git a/libxcb/xcb-xv.pc.in b/libxcb/xcb-xv.pc.in index a78fbf27e..f4476135f 100644 --- a/libxcb/xcb-xv.pc.in +++ b/libxcb/xcb-xv.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB Xv
-Description: XCB Xv Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb xcb-shm
-Libs: -L${libdir} -lxcb-xv
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB Xv +Description: XCB Xv Extension +Version: @PACKAGE_VERSION@ +Requires: xcb xcb-shm +Libs: -L${libdir} -lxcb-xv +Cflags: -I${includedir} diff --git a/libxcb/xcb-xvmc.pc.in b/libxcb/xcb-xvmc.pc.in index fc0d213b9..95bf4effc 100644 --- a/libxcb/xcb-xvmc.pc.in +++ b/libxcb/xcb-xvmc.pc.in @@ -1,11 +1,11 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: XCB XvMC
-Description: XCB XvMC Extension
-Version: @PACKAGE_VERSION@
-Requires: xcb xcb-xv
-Libs: -L${libdir} -lxcb-xvmc
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: XCB XvMC +Description: XCB XvMC Extension +Version: @PACKAGE_VERSION@ +Requires: xcb xcb-xv +Libs: -L${libdir} -lxcb-xvmc +Cflags: -I${includedir} diff --git a/libxcb/xcb.pc.in b/libxcb/xcb.pc.in index 433c1686a..2dc8c13bb 100644 --- a/libxcb/xcb.pc.in +++ b/libxcb/xcb.pc.in @@ -1,13 +1,13 @@ -prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-xcbproto_version=@XCBPROTO_VERSION@
-
-Name: XCB
-Description: X-protocol C Binding
-Version: @PACKAGE_VERSION@
-Requires.private: @NEEDED@
-Libs: -L${libdir} -lxcb
-Libs.private: @LIBS@
-Cflags: -I${includedir}
+prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ +xcbproto_version=@XCBPROTO_VERSION@ + +Name: XCB +Description: X-protocol C Binding +Version: @PACKAGE_VERSION@ +Requires.private: @NEEDED@ +Libs: -L${libdir} -lxcb +Libs.private: @LIBS@ +Cflags: -I${includedir} |