aboutsummaryrefslogtreecommitdiff
path: root/openssl/crypto/rc4/asm/rc4-parisc.pl
diff options
context:
space:
mode:
Diffstat (limited to 'openssl/crypto/rc4/asm/rc4-parisc.pl')
-rw-r--r--openssl/crypto/rc4/asm/rc4-parisc.pl313
1 files changed, 313 insertions, 0 deletions
diff --git a/openssl/crypto/rc4/asm/rc4-parisc.pl b/openssl/crypto/rc4/asm/rc4-parisc.pl
new file mode 100644
index 000000000..916506708
--- /dev/null
+++ b/openssl/crypto/rc4/asm/rc4-parisc.pl
@@ -0,0 +1,313 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# RC4 for PA-RISC.
+
+# June 2009.
+#
+# Performance is 33% better than gcc 3.2 generated code on PA-7100LC.
+# For reference, [4x] unrolled loop is >40% faster than folded one.
+# It's possible to unroll loop 8 times on PA-RISC 2.0, but improvement
+# is believed to be not sufficient to justify the effort...
+#
+# Special thanks to polarhome.com for providing HP-UX account.
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+
+$flavour = shift;
+$output = shift;
+open STDOUT,">$output";
+
+if ($flavour =~ /64/) {
+ $LEVEL ="2.0W";
+ $SIZE_T =8;
+ $FRAME_MARKER =80;
+ $SAVED_RP =16;
+ $PUSH ="std";
+ $PUSHMA ="std,ma";
+ $POP ="ldd";
+ $POPMB ="ldd,mb";
+} else {
+ $LEVEL ="1.0";
+ $SIZE_T =4;
+ $FRAME_MARKER =48;
+ $SAVED_RP =20;
+ $PUSH ="stw";
+ $PUSHMA ="stwm";
+ $POP ="ldw";
+ $POPMB ="ldwm";
+}
+
+$FRAME=4*$SIZE_T+$FRAME_MARKER; # 4 saved regs + frame marker
+ # [+ argument transfer]
+$SZ=1; # defaults to RC4_CHAR
+if (open CONF,"<${dir}../../opensslconf.h") {
+ while(<CONF>) {
+ if (m/#\s*define\s+RC4_INT\s+(.*)/) {
+ $SZ = ($1=~/char$/) ? 1 : 4;
+ last;
+ }
+ }
+ close CONF;
+}
+
+if ($SZ==1) { # RC4_CHAR
+ $LD="ldb";
+ $LDX="ldbx";
+ $MKX="addl";
+ $ST="stb";
+} else { # RC4_INT (~5% faster than RC4_CHAR on PA-7100LC)
+ $LD="ldw";
+ $LDX="ldwx,s";
+ $MKX="sh2addl";
+ $ST="stw";
+}
+
+$key="%r26";
+$len="%r25";
+$inp="%r24";
+$out="%r23";
+
+@XX=("%r19","%r20");
+@TX=("%r21","%r22");
+$YY="%r28";
+$TY="%r29";
+
+$acc="%r1";
+$ix="%r2";
+$iy="%r3";
+$dat0="%r4";
+$dat1="%r5";
+$rem="%r6";
+$mask="%r31";
+
+sub unrolledloopbody {
+for ($i=0;$i<4;$i++) {
+$code.=<<___;
+ ldo 1($XX[0]),$XX[1]
+ `sprintf("$LDX %$TY(%$key),%$dat1") if ($i>0)`
+ and $mask,$XX[1],$XX[1]
+ $LDX $YY($key),$TY
+ $MKX $YY,$key,$ix
+ $LDX $XX[1]($key),$TX[1]
+ $MKX $XX[0],$key,$iy
+ $ST $TX[0],0($ix)
+ comclr,<> $XX[1],$YY,%r0 ; conditional
+ copy $TX[0],$TX[1] ; move
+ `sprintf("%sdep %$dat1,%d,8,%$acc",$i==1?"z":"",8*($i-1)+7) if ($i>0)`
+ $ST $TY,0($iy)
+ addl $TX[0],$TY,$TY
+ addl $TX[1],$YY,$YY
+ and $mask,$TY,$TY
+ and $mask,$YY,$YY
+___
+push(@TX,shift(@TX)); push(@XX,shift(@XX)); # "rotate" registers
+} }
+
+sub foldedloop {
+my ($label,$count)=@_;
+$code.=<<___;
+$label
+ $MKX $YY,$key,$iy
+ $LDX $YY($key),$TY
+ $MKX $XX[0],$key,$ix
+ $ST $TX[0],0($iy)
+ ldo 1($XX[0]),$XX[0]
+ $ST $TY,0($ix)
+ addl $TX[0],$TY,$TY
+ ldbx $inp($out),$dat1
+ and $mask,$TY,$TY
+ and $mask,$XX[0],$XX[0]
+ $LDX $TY($key),$acc
+ $LDX $XX[0]($key),$TX[0]
+ ldo 1($out),$out
+ xor $dat1,$acc,$acc
+ addl $TX[0],$YY,$YY
+ stb $acc,-1($out)
+ addib,<> -1,$count,$label ; $count is always small
+ and $mask,$YY,$YY
+___
+}
+
+$code=<<___;
+ .LEVEL $LEVEL
+ .SPACE \$TEXT\$
+ .SUBSPA \$CODE\$,QUAD=0,ALIGN=8,ACCESS=0x2C,CODE_ONLY
+
+ .EXPORT RC4,ENTRY,ARGW0=GR,ARGW1=GR,ARGW2=GR,ARGW3=GR
+RC4
+ .PROC
+ .CALLINFO FRAME=`$FRAME-4*$SIZE_T`,NO_CALLS,SAVE_RP,ENTRY_GR=6
+ .ENTRY
+ $PUSH %r2,-$SAVED_RP(%sp) ; standard prologue
+ $PUSHMA %r3,$FRAME(%sp)
+ $PUSH %r4,`-$FRAME+1*$SIZE_T`(%sp)
+ $PUSH %r5,`-$FRAME+2*$SIZE_T`(%sp)
+ $PUSH %r6,`-$FRAME+3*$SIZE_T`(%sp)
+
+ cmpib,*= 0,$len,L\$abort
+ sub $inp,$out,$inp ; distance between $inp and $out
+
+ $LD `0*$SZ`($key),$XX[0]
+ $LD `1*$SZ`($key),$YY
+ ldo `2*$SZ`($key),$key
+
+ ldi 0xff,$mask
+ ldi 3,$dat0
+
+ ldo 1($XX[0]),$XX[0] ; warm up loop
+ and $mask,$XX[0],$XX[0]
+ $LDX $XX[0]($key),$TX[0]
+ addl $TX[0],$YY,$YY
+ cmpib,*>>= 6,$len,L\$oop1 ; is $len large enough to bother?
+ and $mask,$YY,$YY
+
+ and,<> $out,$dat0,$rem ; is $out aligned?
+ b L\$alignedout
+ subi 4,$rem,$rem
+ sub $len,$rem,$len
+___
+&foldedloop("L\$alignout",$rem); # process till $out is aligned
+
+$code.=<<___;
+L\$alignedout ; $len is at least 4 here
+ and,<> $inp,$dat0,$acc ; is $inp aligned?
+ b L\$oop4
+ sub $inp,$acc,$rem ; align $inp
+
+ sh3addl $acc,%r0,$acc
+ subi 32,$acc,$acc
+ mtctl $acc,%cr11 ; load %sar with vshd align factor
+ ldwx $rem($out),$dat0
+ ldo 4($rem),$rem
+L\$oop4misalignedinp
+___
+&unrolledloopbody();
+$code.=<<___;
+ $LDX $TY($key),$ix
+ ldwx $rem($out),$dat1
+ ldo -4($len),$len
+ or $ix,$acc,$acc ; last piece, no need to dep
+ vshd $dat0,$dat1,$iy ; align data
+ copy $dat1,$dat0
+ xor $iy,$acc,$acc
+ stw $acc,0($out)
+ cmpib,*<< 3,$len,L\$oop4misalignedinp
+ ldo 4($out),$out
+ cmpib,*= 0,$len,L\$done
+ nop
+ b L\$oop1
+ nop
+
+ .ALIGN 8
+L\$oop4
+___
+&unrolledloopbody();
+$code.=<<___;
+ $LDX $TY($key),$ix
+ ldwx $inp($out),$dat0
+ ldo -4($len),$len
+ or $ix,$acc,$acc ; last piece, no need to dep
+ xor $dat0,$acc,$acc
+ stw $acc,0($out)
+ cmpib,*<< 3,$len,L\$oop4
+ ldo 4($out),$out
+ cmpib,*= 0,$len,L\$done
+ nop
+___
+&foldedloop("L\$oop1",$len);
+$code.=<<___;
+L\$done
+ $POP `-$FRAME-$SAVED_RP`(%sp),%r2
+ ldo -1($XX[0]),$XX[0] ; chill out loop
+ sub $YY,$TX[0],$YY
+ and $mask,$XX[0],$XX[0]
+ and $mask,$YY,$YY
+ $ST $XX[0],`-2*$SZ`($key)
+ $ST $YY,`-1*$SZ`($key)
+ $POP `-$FRAME+1*$SIZE_T`(%sp),%r4
+ $POP `-$FRAME+2*$SIZE_T`(%sp),%r5
+ $POP `-$FRAME+3*$SIZE_T`(%sp),%r6
+L\$abort
+ bv (%r2)
+ .EXIT
+ $POPMB -$FRAME(%sp),%r3
+ .PROCEND
+___
+
+$code.=<<___;
+
+ .EXPORT private_RC4_set_key,ENTRY,ARGW0=GR,ARGW1=GR,ARGW2=GR
+ .ALIGN 8
+private_RC4_set_key
+ .PROC
+ .CALLINFO NO_CALLS
+ .ENTRY
+ $ST %r0,`0*$SZ`($key)
+ $ST %r0,`1*$SZ`($key)
+ ldo `2*$SZ`($key),$key
+ copy %r0,@XX[0]
+L\$1st
+ $ST @XX[0],0($key)
+ ldo 1(@XX[0]),@XX[0]
+ bb,>= @XX[0],`31-8`,L\$1st ; @XX[0]<256
+ ldo $SZ($key),$key
+
+ ldo `-256*$SZ`($key),$key ; rewind $key
+ addl $len,$inp,$inp ; $inp to point at the end
+ sub %r0,$len,%r23 ; inverse index
+ copy %r0,@XX[0]
+ copy %r0,@XX[1]
+ ldi 0xff,$mask
+
+L\$2nd
+ $LDX @XX[0]($key),@TX[0]
+ ldbx %r23($inp),@TX[1]
+ addi,nuv 1,%r23,%r23 ; increment and conditional
+ sub %r0,$len,%r23 ; inverse index
+ addl @TX[0],@XX[1],@XX[1]
+ addl @TX[1],@XX[1],@XX[1]
+ and $mask,@XX[1],@XX[1]
+ $MKX @XX[0],$key,$TY
+ $LDX @XX[1]($key),@TX[1]
+ $MKX @XX[1],$key,$YY
+ ldo 1(@XX[0]),@XX[0]
+ $ST @TX[0],0($YY)
+ bb,>= @XX[0],`31-8`,L\$2nd ; @XX[0]<256
+ $ST @TX[1],0($TY)
+
+ bv,n (%r2)
+ .EXIT
+ nop
+ .PROCEND
+
+ .EXPORT RC4_options,ENTRY
+ .ALIGN 8
+RC4_options
+ .PROC
+ .CALLINFO NO_CALLS
+ .ENTRY
+ blr %r0,%r28
+ ldi 3,%r1
+L\$pic
+ andcm %r28,%r1,%r28
+ bv (%r2)
+ .EXIT
+ ldo L\$opts-L\$pic(%r28),%r28
+ .PROCEND
+ .ALIGN 8
+L\$opts
+ .STRINGZ "rc4(4x,`$SZ==1?"char":"int"`)"
+ .STRINGZ "RC4 for PA-RISC, CRYPTOGAMS by <appro\@openssl.org>"
+___
+$code =~ s/\`([^\`]*)\`/eval $1/gem;
+$code =~ s/cmpib,\*/comib,/gm if ($SIZE_T==4);
+
+print $code;
+close STDOUT;