aboutsummaryrefslogtreecommitdiff
path: root/openssl/crypto/sha/asm/sha512-ppc.pl
diff options
context:
space:
mode:
Diffstat (limited to 'openssl/crypto/sha/asm/sha512-ppc.pl')
-rw-r--r--openssl/crypto/sha/asm/sha512-ppc.pl462
1 files changed, 462 insertions, 0 deletions
diff --git a/openssl/crypto/sha/asm/sha512-ppc.pl b/openssl/crypto/sha/asm/sha512-ppc.pl
new file mode 100644
index 000000000..768a6a6fa
--- /dev/null
+++ b/openssl/crypto/sha/asm/sha512-ppc.pl
@@ -0,0 +1,462 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# I let hardware handle unaligned input, except on page boundaries
+# (see below for details). Otherwise straightforward implementation
+# with X vector in register bank. The module is big-endian [which is
+# not big deal as there're no little-endian targets left around].
+
+# sha256 | sha512
+# -m64 -m32 | -m64 -m32
+# --------------------------------------+-----------------------
+# PPC970,gcc-4.0.0 +50% +38% | +40% +410%(*)
+# Power6,xlc-7 +150% +90% | +100% +430%(*)
+#
+# (*) 64-bit code in 32-bit application context, which actually is
+# on TODO list. It should be noted that for safe deployment in
+# 32-bit *mutli-threaded* context asyncronous signals should be
+# blocked upon entry to SHA512 block routine. This is because
+# 32-bit signaling procedure invalidates upper halves of GPRs.
+# Context switch procedure preserves them, but not signaling:-(
+
+# Second version is true multi-thread safe. Trouble with the original
+# version was that it was using thread local storage pointer register.
+# Well, it scrupulously preserved it, but the problem would arise the
+# moment asynchronous signal was delivered and signal handler would
+# dereference the TLS pointer. While it's never the case in openssl
+# application or test suite, we have to respect this scenario and not
+# use TLS pointer register. Alternative would be to require caller to
+# block signals prior calling this routine. For the record, in 32-bit
+# context R2 serves as TLS pointer, while in 64-bit context - R13.
+
+$flavour=shift;
+$output =shift;
+
+if ($flavour =~ /64/) {
+ $SIZE_T=8;
+ $STU="stdu";
+ $UCMP="cmpld";
+ $SHL="sldi";
+ $POP="ld";
+ $PUSH="std";
+} elsif ($flavour =~ /32/) {
+ $SIZE_T=4;
+ $STU="stwu";
+ $UCMP="cmplw";
+ $SHL="slwi";
+ $POP="lwz";
+ $PUSH="stw";
+} else { die "nonsense $flavour"; }
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
+die "can't locate ppc-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour $output" || die "can't call $xlate: $!";
+
+if ($output =~ /512/) {
+ $func="sha512_block_data_order";
+ $SZ=8;
+ @Sigma0=(28,34,39);
+ @Sigma1=(14,18,41);
+ @sigma0=(1, 8, 7);
+ @sigma1=(19,61, 6);
+ $rounds=80;
+ $LD="ld";
+ $ST="std";
+ $ROR="rotrdi";
+ $SHR="srdi";
+} else {
+ $func="sha256_block_data_order";
+ $SZ=4;
+ @Sigma0=( 2,13,22);
+ @Sigma1=( 6,11,25);
+ @sigma0=( 7,18, 3);
+ @sigma1=(17,19,10);
+ $rounds=64;
+ $LD="lwz";
+ $ST="stw";
+ $ROR="rotrwi";
+ $SHR="srwi";
+}
+
+$FRAME=32*$SIZE_T;
+
+$sp ="r1";
+$toc="r2";
+$ctx="r3"; # zapped by $a0
+$inp="r4"; # zapped by $a1
+$num="r5"; # zapped by $t0
+
+$T ="r0";
+$a0 ="r3";
+$a1 ="r4";
+$t0 ="r5";
+$t1 ="r6";
+$Tbl="r7";
+
+$A ="r8";
+$B ="r9";
+$C ="r10";
+$D ="r11";
+$E ="r12";
+$F ="r13"; $F="r2" if ($SIZE_T==8);# reassigned to exempt TLS pointer
+$G ="r14";
+$H ="r15";
+
+@V=($A,$B,$C,$D,$E,$F,$G,$H);
+@X=("r16","r17","r18","r19","r20","r21","r22","r23",
+ "r24","r25","r26","r27","r28","r29","r30","r31");
+
+$inp="r31"; # reassigned $inp! aliases with @X[15]
+
+sub ROUND_00_15 {
+my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_;
+$code.=<<___;
+ $LD $T,`$i*$SZ`($Tbl)
+ $ROR $a0,$e,$Sigma1[0]
+ $ROR $a1,$e,$Sigma1[1]
+ and $t0,$f,$e
+ andc $t1,$g,$e
+ add $T,$T,$h
+ xor $a0,$a0,$a1
+ $ROR $a1,$a1,`$Sigma1[2]-$Sigma1[1]`
+ or $t0,$t0,$t1 ; Ch(e,f,g)
+ add $T,$T,@X[$i]
+ xor $a0,$a0,$a1 ; Sigma1(e)
+ add $T,$T,$t0
+ add $T,$T,$a0
+
+ $ROR $a0,$a,$Sigma0[0]
+ $ROR $a1,$a,$Sigma0[1]
+ and $t0,$a,$b
+ and $t1,$a,$c
+ xor $a0,$a0,$a1
+ $ROR $a1,$a1,`$Sigma0[2]-$Sigma0[1]`
+ xor $t0,$t0,$t1
+ and $t1,$b,$c
+ xor $a0,$a0,$a1 ; Sigma0(a)
+ add $d,$d,$T
+ xor $t0,$t0,$t1 ; Maj(a,b,c)
+ add $h,$T,$a0
+ add $h,$h,$t0
+
+___
+}
+
+sub ROUND_16_xx {
+my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_;
+$i-=16;
+$code.=<<___;
+ $ROR $a0,@X[($i+1)%16],$sigma0[0]
+ $ROR $a1,@X[($i+1)%16],$sigma0[1]
+ $ROR $t0,@X[($i+14)%16],$sigma1[0]
+ $ROR $t1,@X[($i+14)%16],$sigma1[1]
+ xor $a0,$a0,$a1
+ $SHR $a1,@X[($i+1)%16],$sigma0[2]
+ xor $t0,$t0,$t1
+ $SHR $t1,@X[($i+14)%16],$sigma1[2]
+ add @X[$i],@X[$i],@X[($i+9)%16]
+ xor $a0,$a0,$a1 ; sigma0(X[(i+1)&0x0f])
+ xor $t0,$t0,$t1 ; sigma1(X[(i+14)&0x0f])
+ add @X[$i],@X[$i],$a0
+ add @X[$i],@X[$i],$t0
+___
+&ROUND_00_15($i,$a,$b,$c,$d,$e,$f,$g,$h);
+}
+
+$code=<<___;
+.machine "any"
+.text
+
+.globl $func
+.align 6
+$func:
+ mflr r0
+ $STU $sp,`-($FRAME+16*$SZ)`($sp)
+ $SHL $num,$num,`log(16*$SZ)/log(2)`
+
+ $PUSH $ctx,`$FRAME-$SIZE_T*22`($sp)
+
+ $PUSH r0,`$FRAME-$SIZE_T*21`($sp)
+ $PUSH $toc,`$FRAME-$SIZE_T*20`($sp)
+ $PUSH r13,`$FRAME-$SIZE_T*19`($sp)
+ $PUSH r14,`$FRAME-$SIZE_T*18`($sp)
+ $PUSH r15,`$FRAME-$SIZE_T*17`($sp)
+ $PUSH r16,`$FRAME-$SIZE_T*16`($sp)
+ $PUSH r17,`$FRAME-$SIZE_T*15`($sp)
+ $PUSH r18,`$FRAME-$SIZE_T*14`($sp)
+ $PUSH r19,`$FRAME-$SIZE_T*13`($sp)
+ $PUSH r20,`$FRAME-$SIZE_T*12`($sp)
+ $PUSH r21,`$FRAME-$SIZE_T*11`($sp)
+ $PUSH r22,`$FRAME-$SIZE_T*10`($sp)
+ $PUSH r23,`$FRAME-$SIZE_T*9`($sp)
+ $PUSH r24,`$FRAME-$SIZE_T*8`($sp)
+ $PUSH r25,`$FRAME-$SIZE_T*7`($sp)
+ $PUSH r26,`$FRAME-$SIZE_T*6`($sp)
+ $PUSH r27,`$FRAME-$SIZE_T*5`($sp)
+ $PUSH r28,`$FRAME-$SIZE_T*4`($sp)
+ $PUSH r29,`$FRAME-$SIZE_T*3`($sp)
+ $PUSH r30,`$FRAME-$SIZE_T*2`($sp)
+ $PUSH r31,`$FRAME-$SIZE_T*1`($sp)
+
+ $LD $A,`0*$SZ`($ctx)
+ mr $inp,r4 ; incarnate $inp
+ $LD $B,`1*$SZ`($ctx)
+ $LD $C,`2*$SZ`($ctx)
+ $LD $D,`3*$SZ`($ctx)
+ $LD $E,`4*$SZ`($ctx)
+ $LD $F,`5*$SZ`($ctx)
+ $LD $G,`6*$SZ`($ctx)
+ $LD $H,`7*$SZ`($ctx)
+
+ b LPICmeup
+LPICedup:
+ andi. r0,$inp,3
+ bne Lunaligned
+Laligned:
+ add $num,$inp,$num
+ $PUSH $num,`$FRAME-$SIZE_T*24`($sp) ; end pointer
+ $PUSH $inp,`$FRAME-$SIZE_T*23`($sp) ; inp pointer
+ bl Lsha2_block_private
+Ldone:
+ $POP r0,`$FRAME-$SIZE_T*21`($sp)
+ $POP $toc,`$FRAME-$SIZE_T*20`($sp)
+ $POP r13,`$FRAME-$SIZE_T*19`($sp)
+ $POP r14,`$FRAME-$SIZE_T*18`($sp)
+ $POP r15,`$FRAME-$SIZE_T*17`($sp)
+ $POP r16,`$FRAME-$SIZE_T*16`($sp)
+ $POP r17,`$FRAME-$SIZE_T*15`($sp)
+ $POP r18,`$FRAME-$SIZE_T*14`($sp)
+ $POP r19,`$FRAME-$SIZE_T*13`($sp)
+ $POP r20,`$FRAME-$SIZE_T*12`($sp)
+ $POP r21,`$FRAME-$SIZE_T*11`($sp)
+ $POP r22,`$FRAME-$SIZE_T*10`($sp)
+ $POP r23,`$FRAME-$SIZE_T*9`($sp)
+ $POP r24,`$FRAME-$SIZE_T*8`($sp)
+ $POP r25,`$FRAME-$SIZE_T*7`($sp)
+ $POP r26,`$FRAME-$SIZE_T*6`($sp)
+ $POP r27,`$FRAME-$SIZE_T*5`($sp)
+ $POP r28,`$FRAME-$SIZE_T*4`($sp)
+ $POP r29,`$FRAME-$SIZE_T*3`($sp)
+ $POP r30,`$FRAME-$SIZE_T*2`($sp)
+ $POP r31,`$FRAME-$SIZE_T*1`($sp)
+ mtlr r0
+ addi $sp,$sp,`$FRAME+16*$SZ`
+ blr
+___
+
+# PowerPC specification allows an implementation to be ill-behaved
+# upon unaligned access which crosses page boundary. "Better safe
+# than sorry" principle makes me treat it specially. But I don't
+# look for particular offending word, but rather for the input
+# block which crosses the boundary. Once found that block is aligned
+# and hashed separately...
+$code.=<<___;
+.align 4
+Lunaligned:
+ subfic $t1,$inp,4096
+ andi. $t1,$t1,`4096-16*$SZ` ; distance to closest page boundary
+ beq Lcross_page
+ $UCMP $num,$t1
+ ble- Laligned ; didn't cross the page boundary
+ subfc $num,$t1,$num
+ add $t1,$inp,$t1
+ $PUSH $num,`$FRAME-$SIZE_T*25`($sp) ; save real remaining num
+ $PUSH $t1,`$FRAME-$SIZE_T*24`($sp) ; intermediate end pointer
+ $PUSH $inp,`$FRAME-$SIZE_T*23`($sp) ; inp pointer
+ bl Lsha2_block_private
+ ; $inp equals to the intermediate end pointer here
+ $POP $num,`$FRAME-$SIZE_T*25`($sp) ; restore real remaining num
+Lcross_page:
+ li $t1,`16*$SZ/4`
+ mtctr $t1
+ addi r20,$sp,$FRAME ; aligned spot below the frame
+Lmemcpy:
+ lbz r16,0($inp)
+ lbz r17,1($inp)
+ lbz r18,2($inp)
+ lbz r19,3($inp)
+ addi $inp,$inp,4
+ stb r16,0(r20)
+ stb r17,1(r20)
+ stb r18,2(r20)
+ stb r19,3(r20)
+ addi r20,r20,4
+ bdnz Lmemcpy
+
+ $PUSH $inp,`$FRAME-$SIZE_T*26`($sp) ; save real inp
+ addi $t1,$sp,`$FRAME+16*$SZ` ; fictitious end pointer
+ addi $inp,$sp,$FRAME ; fictitious inp pointer
+ $PUSH $num,`$FRAME-$SIZE_T*25`($sp) ; save real num
+ $PUSH $t1,`$FRAME-$SIZE_T*24`($sp) ; end pointer
+ $PUSH $inp,`$FRAME-$SIZE_T*23`($sp) ; inp pointer
+ bl Lsha2_block_private
+ $POP $inp,`$FRAME-$SIZE_T*26`($sp) ; restore real inp
+ $POP $num,`$FRAME-$SIZE_T*25`($sp) ; restore real num
+ addic. $num,$num,`-16*$SZ` ; num--
+ bne- Lunaligned
+ b Ldone
+___
+
+$code.=<<___;
+.align 4
+Lsha2_block_private:
+___
+for($i=0;$i<16;$i++) {
+$code.=<<___ if ($SZ==4);
+ lwz @X[$i],`$i*$SZ`($inp)
+___
+# 64-bit loads are split to 2x32-bit ones, as CPU can't handle
+# unaligned 64-bit loads, only 32-bit ones...
+$code.=<<___ if ($SZ==8);
+ lwz $t0,`$i*$SZ`($inp)
+ lwz @X[$i],`$i*$SZ+4`($inp)
+ insrdi @X[$i],$t0,32,0
+___
+ &ROUND_00_15($i,@V);
+ unshift(@V,pop(@V));
+}
+$code.=<<___;
+ li $T,`$rounds/16-1`
+ mtctr $T
+.align 4
+Lrounds:
+ addi $Tbl,$Tbl,`16*$SZ`
+___
+for(;$i<32;$i++) {
+ &ROUND_16_xx($i,@V);
+ unshift(@V,pop(@V));
+}
+$code.=<<___;
+ bdnz- Lrounds
+
+ $POP $ctx,`$FRAME-$SIZE_T*22`($sp)
+ $POP $inp,`$FRAME-$SIZE_T*23`($sp) ; inp pointer
+ $POP $num,`$FRAME-$SIZE_T*24`($sp) ; end pointer
+ subi $Tbl,$Tbl,`($rounds-16)*$SZ` ; rewind Tbl
+
+ $LD r16,`0*$SZ`($ctx)
+ $LD r17,`1*$SZ`($ctx)
+ $LD r18,`2*$SZ`($ctx)
+ $LD r19,`3*$SZ`($ctx)
+ $LD r20,`4*$SZ`($ctx)
+ $LD r21,`5*$SZ`($ctx)
+ $LD r22,`6*$SZ`($ctx)
+ addi $inp,$inp,`16*$SZ` ; advance inp
+ $LD r23,`7*$SZ`($ctx)
+ add $A,$A,r16
+ add $B,$B,r17
+ $PUSH $inp,`$FRAME-$SIZE_T*23`($sp)
+ add $C,$C,r18
+ $ST $A,`0*$SZ`($ctx)
+ add $D,$D,r19
+ $ST $B,`1*$SZ`($ctx)
+ add $E,$E,r20
+ $ST $C,`2*$SZ`($ctx)
+ add $F,$F,r21
+ $ST $D,`3*$SZ`($ctx)
+ add $G,$G,r22
+ $ST $E,`4*$SZ`($ctx)
+ add $H,$H,r23
+ $ST $F,`5*$SZ`($ctx)
+ $ST $G,`6*$SZ`($ctx)
+ $UCMP $inp,$num
+ $ST $H,`7*$SZ`($ctx)
+ bne Lsha2_block_private
+ blr
+___
+
+# Ugly hack here, because PPC assembler syntax seem to vary too
+# much from platforms to platform...
+$code.=<<___;
+.align 6
+LPICmeup:
+ bl LPIC
+ addi $Tbl,$Tbl,`64-4` ; "distance" between . and last nop
+ b LPICedup
+ nop
+ nop
+ nop
+ nop
+ nop
+LPIC: mflr $Tbl
+ blr
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+___
+$code.=<<___ if ($SZ==8);
+ .long 0x428a2f98,0xd728ae22,0x71374491,0x23ef65cd
+ .long 0xb5c0fbcf,0xec4d3b2f,0xe9b5dba5,0x8189dbbc
+ .long 0x3956c25b,0xf348b538,0x59f111f1,0xb605d019
+ .long 0x923f82a4,0xaf194f9b,0xab1c5ed5,0xda6d8118
+ .long 0xd807aa98,0xa3030242,0x12835b01,0x45706fbe
+ .long 0x243185be,0x4ee4b28c,0x550c7dc3,0xd5ffb4e2
+ .long 0x72be5d74,0xf27b896f,0x80deb1fe,0x3b1696b1
+ .long 0x9bdc06a7,0x25c71235,0xc19bf174,0xcf692694
+ .long 0xe49b69c1,0x9ef14ad2,0xefbe4786,0x384f25e3
+ .long 0x0fc19dc6,0x8b8cd5b5,0x240ca1cc,0x77ac9c65
+ .long 0x2de92c6f,0x592b0275,0x4a7484aa,0x6ea6e483
+ .long 0x5cb0a9dc,0xbd41fbd4,0x76f988da,0x831153b5
+ .long 0x983e5152,0xee66dfab,0xa831c66d,0x2db43210
+ .long 0xb00327c8,0x98fb213f,0xbf597fc7,0xbeef0ee4
+ .long 0xc6e00bf3,0x3da88fc2,0xd5a79147,0x930aa725
+ .long 0x06ca6351,0xe003826f,0x14292967,0x0a0e6e70
+ .long 0x27b70a85,0x46d22ffc,0x2e1b2138,0x5c26c926
+ .long 0x4d2c6dfc,0x5ac42aed,0x53380d13,0x9d95b3df
+ .long 0x650a7354,0x8baf63de,0x766a0abb,0x3c77b2a8
+ .long 0x81c2c92e,0x47edaee6,0x92722c85,0x1482353b
+ .long 0xa2bfe8a1,0x4cf10364,0xa81a664b,0xbc423001
+ .long 0xc24b8b70,0xd0f89791,0xc76c51a3,0x0654be30
+ .long 0xd192e819,0xd6ef5218,0xd6990624,0x5565a910
+ .long 0xf40e3585,0x5771202a,0x106aa070,0x32bbd1b8
+ .long 0x19a4c116,0xb8d2d0c8,0x1e376c08,0x5141ab53
+ .long 0x2748774c,0xdf8eeb99,0x34b0bcb5,0xe19b48a8
+ .long 0x391c0cb3,0xc5c95a63,0x4ed8aa4a,0xe3418acb
+ .long 0x5b9cca4f,0x7763e373,0x682e6ff3,0xd6b2b8a3
+ .long 0x748f82ee,0x5defb2fc,0x78a5636f,0x43172f60
+ .long 0x84c87814,0xa1f0ab72,0x8cc70208,0x1a6439ec
+ .long 0x90befffa,0x23631e28,0xa4506ceb,0xde82bde9
+ .long 0xbef9a3f7,0xb2c67915,0xc67178f2,0xe372532b
+ .long 0xca273ece,0xea26619c,0xd186b8c7,0x21c0c207
+ .long 0xeada7dd6,0xcde0eb1e,0xf57d4f7f,0xee6ed178
+ .long 0x06f067aa,0x72176fba,0x0a637dc5,0xa2c898a6
+ .long 0x113f9804,0xbef90dae,0x1b710b35,0x131c471b
+ .long 0x28db77f5,0x23047d84,0x32caab7b,0x40c72493
+ .long 0x3c9ebe0a,0x15c9bebc,0x431d67c4,0x9c100d4c
+ .long 0x4cc5d4be,0xcb3e42b6,0x597f299c,0xfc657e2a
+ .long 0x5fcb6fab,0x3ad6faec,0x6c44198c,0x4a475817
+___
+$code.=<<___ if ($SZ==4);
+ .long 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5
+ .long 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5
+ .long 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3
+ .long 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174
+ .long 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc
+ .long 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da
+ .long 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7
+ .long 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967
+ .long 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13
+ .long 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85
+ .long 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3
+ .long 0xd192e819,0xd6990624,0xf40e3585,0x106aa070
+ .long 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5
+ .long 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3
+ .long 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208
+ .long 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2
+___
+
+$code =~ s/\`([^\`]*)\`/eval $1/gem;
+print $code;
+close STDOUT;