9 files changed, 107 insertions, 10 deletions
diff --git a/openssl/doc/apps/ciphers.pod b/openssl/doc/apps/ciphers.pod
index e9280bc50..1c26e3b3d 100644
--- a/openssl/doc/apps/ciphers.pod
+++ b/openssl/doc/apps/ciphers.pod
@@ -365,10 +365,8 @@ e.g. DES-CBC3-SHA. In these cases, RSA authentication is used.
  SSL_RSA_WITH_DES_CBC_SHA                DES-CBC-SHA
  SSL_RSA_WITH_3DES_EDE_CBC_SHA           DES-CBC3-SHA
 
- SSL_DH_DSS_EXPORT_WITH_DES40_CBC_SHA    EXP-DH-DSS-DES-CBC-SHA
  SSL_DH_DSS_WITH_DES_CBC_SHA             DH-DSS-DES-CBC-SHA
  SSL_DH_DSS_WITH_3DES_EDE_CBC_SHA        DH-DSS-DES-CBC3-SHA
- SSL_DH_RSA_EXPORT_WITH_DES40_CBC_SHA    EXP-DH-RSA-DES-CBC-SHA
  SSL_DH_RSA_WITH_DES_CBC_SHA             DH-RSA-DES-CBC-SHA
  SSL_DH_RSA_WITH_3DES_EDE_CBC_SHA        DH-RSA-DES-CBC3-SHA
  SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA   EXP-EDH-DSS-DES-CBC-SHA
diff --git a/openssl/doc/apps/cms.pod b/openssl/doc/apps/cms.pod
index 76dbf2ca3..4eaedbcd3 100644
--- a/openssl/doc/apps/cms.pod
+++ b/openssl/doc/apps/cms.pod
@@ -35,6 +35,7 @@ B<openssl> B<cms>
 [B<-print>]
 [B<-CAfile file>]
 [B<-CApath dir>]
+[B<-no_alt_chains>]
 [B<-md digest>]
 [B<-[cipher]>]
 [B<-nointern>]
@@ -419,7 +420,7 @@ portion of a message so they may be included manually. If signing
 then many S/MIME mail clients check the signers certificate's email
 address matches that specified in the From: address.
 
-=item B<-purpose, -ignore_critical, -issuer_checks, -crl_check, -crl_check_all, -policy_check, -extended_crl, -x509_strict, -policy -check_ss_sig>
+=item B<-purpose, -ignore_critical, -issuer_checks, -crl_check, -crl_check_all, -policy_check, -extended_crl, -x509_strict, -policy -check_ss_sig -no_alt_chains>
 
 Set various certificate chain valiadition option. See the
 L<B<verify>|verify(1)> manual page for details.
@@ -655,4 +656,6 @@ Support for RSA-OAEP and RSA-PSS was first added to OpenSSL 1.1.0.
 The use of non-RSA keys with B<-encrypt> and B<-decrypt> was first added
 to OpenSSL 1.1.0.
 
+The -no_alt_chains options was first added to OpenSSL 1.0.2b.
+
 =cut
diff --git a/openssl/doc/apps/config.pod b/openssl/doc/apps/config.pod
index d5cce54f4..e12591528 100644
--- a/openssl/doc/apps/config.pod
+++ b/openssl/doc/apps/config.pod
@@ -277,6 +277,59 @@ priority and B</tmp> used if neither is defined:
  # The above value is used if TEMP isn't in the environment
  tmpfile=${ENV::TEMP}/tmp.filename
 
+Simple OpenSSL library configuration example to enter FIPS mode:
+
+ # Default appname: should match "appname" parameter (if any)
+ # supplied to CONF_modules_load_file et al.
+ openssl_conf = openssl_conf_section
+
+ [openssl_conf_section]
+ # Configuration module list
+ alg_section = evp_sect
+
+ [evp_sect]
+ # Set to "yes" to enter FIPS mode if supported
+ fips_mode = yes
+
+Note: in the above example you will get an error in non FIPS capable versions
+of OpenSSL.
+
+More complex OpenSSL library configuration. Add OID and don't enter FIPS mode:
+
+ # Default appname: should match "appname" parameter (if any)
+ # supplied to CONF_modules_load_file et al.
+ openssl_conf = openssl_conf_section
+
+ [openssl_conf_section]
+ # Configuration module list
+ alg_section = evp_sect
+ oid_section = new_oids
+
+ [evp_sect]
+ # This will have no effect as FIPS mode is off by default.
+ # Set to "yes" to enter FIPS mode, if supported
+ fips_mode = no
+
+ [new_oids]
+ # New OID, just short name
+ newoid1 = 1.2.3.4.1
+ # New OID shortname and long name
+ newoid2 = New OID 2 long name, 1.2.3.4.2
+
+The above examples can be used with with any application supporting library
+configuration if "openssl_conf" is modified to match the appropriate "appname".
+
+For example if the second sample file above is saved to "example.cnf" then
+the command line:
+
+ OPENSSL_CONF=example.cnf openssl asn1parse -genstr OID:1.2.3.4.1
+
+will output:
+
+    0:d=0  hl=2 l=   4 prim: OBJECT            :newoid1
+
+showing that the OID "newoid1" has been added as "1.2.3.4.1".
+
 =head1 BUGS
 
 Currently there is no way to include characters using the octal B<\nnn>
diff --git a/openssl/doc/apps/dhparam.pod b/openssl/doc/apps/dhparam.pod
index 6e27cf5c1..1cd4c7666 100644
--- a/openssl/doc/apps/dhparam.pod
+++ b/openssl/doc/apps/dhparam.pod
@@ -71,8 +71,10 @@ check if the parameters are valid primes and generator.
 
 =item B<-2>, B<-5>
 
-The generator to use, either 2 or 5. 2 is the default. If present then the
-input file is ignored and parameters are generated instead.
+The generator to use, either 2 or 5. If present then the
+input file is ignored and parameters are generated instead. If not
+present but B<numbits> is present, parameters are generated with the
+default generator 2.
 
 =item B<-rand> I<file(s)>
 
@@ -85,9 +87,10 @@ all others.
 =item I<numbits>
 
 this option specifies that a parameter set should be generated of size
-I<numbits>. It must be the last option. If not present then a value of 512
-is used. If this option is present then the input file is ignored and 
-parameters are generated instead.
+I<numbits>. It must be the last option. If this option is present then
+the input file is ignored and parameters are generated instead. If
+this option is not present but a generator (B<-2> or B<-5>) is
+present, parameters are generated with a default length of 2048 bits.
 
 =item B<-noout>
 
diff --git a/openssl/doc/apps/ocsp.pod b/openssl/doc/apps/ocsp.pod
index 2372b373c..4639502a0 100644
--- a/openssl/doc/apps/ocsp.pod
+++ b/openssl/doc/apps/ocsp.pod
@@ -29,6 +29,7 @@ B<openssl> B<ocsp>
 [B<-path>]
 [B<-CApath dir>]
 [B<-CAfile file>]
+[B<-no_alt_chains>]]
 [B<-VAfile file>]
 [B<-validity_period n>]
 [B<-status_age n>]
@@ -143,6 +144,10 @@ connection timeout to the OCSP responder in seconds
 file or pathname containing trusted CA certificates. These are used to verify
 the signature on the OCSP response.
 
+=item B<-no_alt_chains>
+
+See L<B<verify>|verify(1)> manual page for details.
+
 =item B<-verify_other file>
 
 file containing additional certificates to search when attempting to locate
@@ -379,3 +384,9 @@ second file.
 
  openssl ocsp -index demoCA/index.txt -rsigner rcert.pem -CA demoCA/cacert.pem
      -reqin req.der -respout resp.der
+
+=head1 HISTORY
+
+The -no_alt_chains options was first added to OpenSSL 1.0.2b.
+
+=cut
diff --git a/openssl/doc/apps/s_client.pod b/openssl/doc/apps/s_client.pod
index aad59b181..84d052706 100644
--- a/openssl/doc/apps/s_client.pod
+++ b/openssl/doc/apps/s_client.pod
@@ -19,6 +19,7 @@ B<openssl> B<s_client>
 [B<-pass arg>]
 [B<-CApath directory>]
 [B<-CAfile filename>]
+[B<-no_alt_chains>]
 [B<-reconnect>]
 [B<-pause>]
 [B<-showcerts>]
@@ -120,7 +121,7 @@ also used when building the client certificate chain.
 A file containing trusted certificates to use during server authentication
 and to use when attempting to build the client certificate chain.
 
-=item B<-purpose, -ignore_critical, -issuer_checks, -crl_check, -crl_check_all, -policy_check, -extended_crl, -x509_strict, -policy -check_ss_sig>
+=item B<-purpose, -ignore_critical, -issuer_checks, -crl_check, -crl_check_all, -policy_check, -extended_crl, -x509_strict, -policy -check_ss_sig -no_alt_chains>
 
 Set various certificate chain valiadition option. See the
 L<B<verify>|verify(1)> manual page for details.
@@ -361,4 +362,8 @@ information whenever a session is renegotiated.
 
 L<sess_id(1)|sess_id(1)>, L<s_server(1)|s_server(1)>, L<ciphers(1)|ciphers(1)>
 
+=head1 HISTORY
+
+The -no_alt_chains options was first added to OpenSSL 1.0.2b.
+
 =cut
diff --git a/openssl/doc/apps/s_server.pod b/openssl/doc/apps/s_server.pod
index b37f410fb..baca77924 100644
--- a/openssl/doc/apps/s_server.pod
+++ b/openssl/doc/apps/s_server.pod
@@ -33,6 +33,7 @@ B<openssl> B<s_server>
 [B<-state>]
 [B<-CApath directory>]
 [B<-CAfile filename>]
+[B<-no_alt_chains>]
 [B<-nocert>]
 [B<-cipher cipherlist>]
 [B<-serverpref>]
@@ -174,6 +175,10 @@ and to use when attempting to build the server certificate chain. The list
 is also used in the list of acceptable client CAs passed to the client when
 a certificate is requested.
 
+=item B<-no_alt_chains>
+
+See the L<B<verify>|verify(1)> manual page for details.
+
 =item B<-state>
 
 prints out the SSL session states.
@@ -406,4 +411,8 @@ unknown cipher suites a client says it supports.
 
 L<sess_id(1)|sess_id(1)>, L<s_client(1)|s_client(1)>, L<ciphers(1)|ciphers(1)>
 
+=head1 HISTORY
+
+The -no_alt_chains options was first added to OpenSSL 1.0.2b.
+
 =cut
diff --git a/openssl/doc/apps/smime.pod b/openssl/doc/apps/smime.pod
index d39a59a90..d5618c8ff 100644
--- a/openssl/doc/apps/smime.pod
+++ b/openssl/doc/apps/smime.pod
@@ -15,6 +15,7 @@ B<openssl> B<smime>
 [B<-pk7out>]
 [B<-[cipher]>]
 [B<-in file>]
+[B<-no_alt_chains>]
 [B<-certfile file>]
 [B<-signer file>]
 [B<-recip  file>]
@@ -259,7 +260,7 @@ portion of a message so they may be included manually. If signing
 then many S/MIME mail clients check the signers certificate's email
 address matches that specified in the From: address.
 
-=item B<-purpose, -ignore_critical, -issuer_checks, -crl_check, -crl_check_all, -policy_check, -extended_crl, -x509_strict, -policy -check_ss_sig>
+=item B<-purpose, -ignore_critical, -issuer_checks, -crl_check, -crl_check_all, -policy_check, -extended_crl, -x509_strict, -policy -check_ss_sig -no_alt_chains>
 
 Set various options of certificate chain verification. See
 L<B<verify>|verify(1)> manual page for details.
@@ -441,5 +442,6 @@ structures may cause parsing errors.
 The use of multiple B<-signer> options and the B<-resign> command were first
 added in OpenSSL 1.0.0
 
+The -no_alt_chains options was first added to OpenSSL 1.0.2b.
 
 =cut
diff --git a/openssl/doc/apps/verify.pod b/openssl/doc/apps/verify.pod
index df0153435..df1b86dfe 100644
--- a/openssl/doc/apps/verify.pod
+++ b/openssl/doc/apps/verify.pod
@@ -25,6 +25,7 @@ B<openssl> B<verify>
 [B<-extended_crl>]
 [B<-use_deltas>]
 [B<-policy_print>]
+[B<-no_alt_chains>]
 [B<-untrusted file>]
 [B<-help>]
 [B<-issuer_checks>]
@@ -124,6 +125,14 @@ Set policy variable inhibit-any-policy (see RFC5280).
 
 Set policy variable inhibit-policy-mapping (see RFC5280).
 
+=item B<-no_alt_chains>
+
+When building a certificate chain, if the first certificate chain found is not
+trusted, then OpenSSL will continue to check to see if an alternative chain can
+be found that is trusted. With this option that behaviour is suppressed so that
+only the first chain found is ever used. Using this option will force the
+behaviour to match that of previous OpenSSL versions.
+
 =item B<-policy_print>
 
 Print out diagnostics related to policy processing.
@@ -425,4 +434,8 @@ B<20 X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY> error codes.
 
 L<x509(1)|x509(1)>
 
+=head1 HISTORY
+
+The -no_alt_chains options was first added to OpenSSL 1.0.2b.
+
 =cut