aboutsummaryrefslogtreecommitdiff
path: root/openssl/doc/crypto/BIO_s_bio.pod
diff options
context:
space:
mode:
Diffstat (limited to 'openssl/doc/crypto/BIO_s_bio.pod')
-rw-r--r--openssl/doc/crypto/BIO_s_bio.pod182
1 files changed, 182 insertions, 0 deletions
diff --git a/openssl/doc/crypto/BIO_s_bio.pod b/openssl/doc/crypto/BIO_s_bio.pod
new file mode 100644
index 000000000..8d0a55a02
--- /dev/null
+++ b/openssl/doc/crypto/BIO_s_bio.pod
@@ -0,0 +1,182 @@
+=pod
+
+=head1 NAME
+
+BIO_s_bio, BIO_make_bio_pair, BIO_destroy_bio_pair, BIO_shutdown_wr,
+BIO_set_write_buf_size, BIO_get_write_buf_size, BIO_new_bio_pair,
+BIO_get_write_guarantee, BIO_ctrl_get_write_guarantee, BIO_get_read_request,
+BIO_ctrl_get_read_request, BIO_ctrl_reset_read_request - BIO pair BIO
+
+=head1 SYNOPSIS
+
+ #include <openssl/bio.h>
+
+ BIO_METHOD *BIO_s_bio(void);
+
+ #define BIO_make_bio_pair(b1,b2) (int)BIO_ctrl(b1,BIO_C_MAKE_BIO_PAIR,0,b2)
+ #define BIO_destroy_bio_pair(b) (int)BIO_ctrl(b,BIO_C_DESTROY_BIO_PAIR,0,NULL)
+
+ #define BIO_shutdown_wr(b) (int)BIO_ctrl(b, BIO_C_SHUTDOWN_WR, 0, NULL)
+
+ #define BIO_set_write_buf_size(b,size) (int)BIO_ctrl(b,BIO_C_SET_WRITE_BUF_SIZE,size,NULL)
+ #define BIO_get_write_buf_size(b,size) (size_t)BIO_ctrl(b,BIO_C_GET_WRITE_BUF_SIZE,size,NULL)
+
+ int BIO_new_bio_pair(BIO **bio1, size_t writebuf1, BIO **bio2, size_t writebuf2);
+
+ #define BIO_get_write_guarantee(b) (int)BIO_ctrl(b,BIO_C_GET_WRITE_GUARANTEE,0,NULL)
+ size_t BIO_ctrl_get_write_guarantee(BIO *b);
+
+ #define BIO_get_read_request(b) (int)BIO_ctrl(b,BIO_C_GET_READ_REQUEST,0,NULL)
+ size_t BIO_ctrl_get_read_request(BIO *b);
+
+ int BIO_ctrl_reset_read_request(BIO *b);
+
+=head1 DESCRIPTION
+
+BIO_s_bio() returns the method for a BIO pair. A BIO pair is a pair of source/sink
+BIOs where data written to either half of the pair is buffered and can be read from
+the other half. Both halves must usually by handled by the same application thread
+since no locking is done on the internal data structures.
+
+Since BIO chains typically end in a source/sink BIO it is possible to make this
+one half of a BIO pair and have all the data processed by the chain under application
+control.
+
+One typical use of BIO pairs is to place TLS/SSL I/O under application control, this
+can be used when the application wishes to use a non standard transport for
+TLS/SSL or the normal socket routines are inappropriate.
+
+Calls to BIO_read() will read data from the buffer or request a retry if no
+data is available.
+
+Calls to BIO_write() will place data in the buffer or request a retry if the
+buffer is full.
+
+The standard calls BIO_ctrl_pending() and BIO_ctrl_wpending() can be used to
+determine the amount of pending data in the read or write buffer.
+
+BIO_reset() clears any data in the write buffer.
+
+BIO_make_bio_pair() joins two separate BIOs into a connected pair.
+
+BIO_destroy_pair() destroys the association between two connected BIOs. Freeing
+up any half of the pair will automatically destroy the association.
+
+BIO_shutdown_wr() is used to close down a BIO B<b>. After this call no further
+writes on BIO B<b> are allowed (they will return an error). Reads on the other
+half of the pair will return any pending data or EOF when all pending data has
+been read.
+
+BIO_set_write_buf_size() sets the write buffer size of BIO B<b> to B<size>.
+If the size is not initialized a default value is used. This is currently
+17K, sufficient for a maximum size TLS record.
+
+BIO_get_write_buf_size() returns the size of the write buffer.
+
+BIO_new_bio_pair() combines the calls to BIO_new(), BIO_make_bio_pair() and
+BIO_set_write_buf_size() to create a connected pair of BIOs B<bio1>, B<bio2>
+with write buffer sizes B<writebuf1> and B<writebuf2>. If either size is
+zero then the default size is used. BIO_new_bio_pair() does not check whether
+B<bio1> or B<bio2> do point to some other BIO, the values are overwritten,
+BIO_free() is not called.
+
+BIO_get_write_guarantee() and BIO_ctrl_get_write_guarantee() return the maximum
+length of data that can be currently written to the BIO. Writes larger than this
+value will return a value from BIO_write() less than the amount requested or if the
+buffer is full request a retry. BIO_ctrl_get_write_guarantee() is a function
+whereas BIO_get_write_guarantee() is a macro.
+
+BIO_get_read_request() and BIO_ctrl_get_read_request() return the
+amount of data requested, or the buffer size if it is less, if the
+last read attempt at the other half of the BIO pair failed due to an
+empty buffer. This can be used to determine how much data should be
+written to the BIO so the next read will succeed: this is most useful
+in TLS/SSL applications where the amount of data read is usually
+meaningful rather than just a buffer size. After a successful read
+this call will return zero. It also will return zero once new data
+has been written satisfying the read request or part of it.
+Note that BIO_get_read_request() never returns an amount larger
+than that returned by BIO_get_write_guarantee().
+
+BIO_ctrl_reset_read_request() can also be used to reset the value returned by
+BIO_get_read_request() to zero.
+
+=head1 NOTES
+
+Both halves of a BIO pair should be freed. That is even if one half is implicit
+freed due to a BIO_free_all() or SSL_free() call the other half needs to be freed.
+
+When used in bidirectional applications (such as TLS/SSL) care should be taken to
+flush any data in the write buffer. This can be done by calling BIO_pending()
+on the other half of the pair and, if any data is pending, reading it and sending
+it to the underlying transport. This must be done before any normal processing
+(such as calling select() ) due to a request and BIO_should_read() being true.
+
+To see why this is important consider a case where a request is sent using
+BIO_write() and a response read with BIO_read(), this can occur during an
+TLS/SSL handshake for example. BIO_write() will succeed and place data in the write
+buffer. BIO_read() will initially fail and BIO_should_read() will be true. If
+the application then waits for data to be available on the underlying transport
+before flushing the write buffer it will never succeed because the request was
+never sent!
+
+=head1 RETURN VALUES
+
+BIO_new_bio_pair() returns 1 on success, with the new BIOs available in
+B<bio1> and B<bio2>, or 0 on failure, with NULL pointers stored into the
+locations for B<bio1> and B<bio2>. Check the error stack for more information.
+
+[XXXXX: More return values need to be added here]
+
+=head1 EXAMPLE
+
+The BIO pair can be used to have full control over the network access of an
+application. The application can call select() on the socket as required
+without having to go through the SSL-interface.
+
+ BIO *internal_bio, *network_bio;
+ ...
+ BIO_new_bio_pair(internal_bio, 0, network_bio, 0);
+ SSL_set_bio(ssl, internal_bio, internal_bio);
+ SSL_operations();
+ ...
+
+ application | TLS-engine
+ | |
+ +----------> SSL_operations()
+ | /\ ||
+ | || \/
+ | BIO-pair (internal_bio)
+ +----------< BIO-pair (network_bio)
+ | |
+ socket |
+
+ ...
+ SSL_free(ssl); /* implicitly frees internal_bio */
+ BIO_free(network_bio);
+ ...
+
+As the BIO pair will only buffer the data and never directly access the
+connection, it behaves non-blocking and will return as soon as the write
+buffer is full or the read buffer is drained. Then the application has to
+flush the write buffer and/or fill the read buffer.
+
+Use the BIO_ctrl_pending(), to find out whether data is buffered in the BIO
+and must be transfered to the network. Use BIO_ctrl_get_read_request() to
+find out, how many bytes must be written into the buffer before the
+SSL_operation() can successfully be continued.
+
+=head1 WARNING
+
+As the data is buffered, SSL_operation() may return with a ERROR_SSL_WANT_READ
+condition, but there is still data in the write buffer. An application must
+not rely on the error value of SSL_operation() but must assure that the
+write buffer is always flushed first. Otherwise a deadlock may occur as
+the peer might be waiting for the data before being able to continue.
+
+=head1 SEE ALSO
+
+L<SSL_set_bio(3)|SSL_set_bio(3)>, L<ssl(3)|ssl(3)>, L<bio(3)|bio(3)>,
+L<BIO_should_retry(3)|BIO_should_retry(3)>, L<BIO_read(3)|BIO_read(3)>
+
+=cut